CCG E1EX QuickStop-Ex™ Barrier Gland

•For use indoors, outdoors and hazardous areas with unfilled hygroscopic multicore cable.
•Two-part handling, no loose parts.
•Captive Cone and Cone Ring provides an armour clamp and earth bond for steel wire armour and aluminium armour.
•Instantly mixed and injected resin. Resin forms a 100% barrier seal around the individual cores of the cable.
CCG's QuickStop-Ex™ Barrier Gland with an instant mixing, injecting resin has all but eliminated the hassles surrounding the preparing, mixing and applying of compounds/resins in Barrier Glands. The QuickStop-Ex™ Injection Resin™system is instantly and 100% accurately mixed whilst being simultaneously injected into the barrier gland in one single action. This reduces the installation time and gives an increased confidence in the installation compared to the epoxy putty or sachet mix liquid pour resins.
The Injection resin flows into all the cable voids and interstices, completely filling the cable end. This forms a 100% barrier to any migration of explosive gases or fluids down the inside of an unfilled hygroscopic cable. QuickStop-Ex™ barrier glands are tested and fully comply to the latest IEC Ex standards and installation codes of practice.
ACCURATE, INSTANT MIXING AND APPLICATION IN ONE SINGLE ACTION
EASE OF USE
QuickStop-Ex™ Injection Resin™ is held in injection tubes and with a vortex mixing nozzle it requires just one hand to mix and apply. Unlike epoxy putty or other liquid resins which require two hands to mix.
ONE ACTION
QuickStop-Ex™ Injection Resin™ is instantly and accurately mixed and injected in just one action through the vortex-mixing nozzle, completely eliminating the time taken as well as the risks involved which are prevalent when premixing other forms of resins.
100% SAFE AND EFFECTIVE
QuickStop-Ex™ liquid resin flows into and fills all the voids in unfilled multi core cables displacing all air and guaranteeing a 100% gas proof barrier seal. Unlike traditional putty filled barrier glands requiring specialized skill and care to install.
QUICK SETTING
QuickStop-Ex™ Resin sets in minutes at 20°C it takes 15 minutes and at 40°C it takes just 8 minutes to set.
LONGER SHELF LIFE
Because the QuickStop-Ex™ Injection Resin™ is held in two separate mixing tubes, there is no risk of diffusion between the resin and the activator, as in the case with a sachet mix system. Therefore there are no cumbersome cold storage requirements.
IECEx ITA 12.0014X, TÜV 13 ATEX 7397X and MASC MS/13-028X
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db