PEMP Android 11 updated to Android 12 and its features
All PEMP Android 11 Screen can update to Android 12 version.
Note:
1. if your Android 11 software version is lower than 2.2.3, you must first update it to 2.2.3;
2. then update it to the transition version 2.2.7 or higher; you can only update it to Android 12 version 1.3.6 successfully;
3. after you update to Android 12 version, you can't go back to Android 11 version.
Android 11 APP Version 2.2.3 Down load link:
drive.google.com/file/d/1hqmU...
Android 11 APP Version 2.4.5 Down load link:
drive.google.com/file/d/1gHMO...
Android 12 APP Version 1.4.4 Down load link:
drive.google.com/file/d/1Tckh...
How to upgrade Android firmware of PEMP android screen
• How to upgrade Android...
How to get the id8 menu?
Step 1. Please unzip the OEM.zip file to get the OEM file
Put the oem file to your U disk, connect with PEMP Android USB, enter factory settings.
Settings/factory settings/pass word 070305/Prifile import/import configuration
OEM file download link:
drive.google.com/file/d/1wVxk...
Step 2. after import the OEM file, you need to go to factory settings, select ID8 in UI Configuration, wait 10 seconds and reboot the device and you will get ID8 UI
If you have any questions, please contact our after-sales service team
Service@pempcar.com
I did the upgrade and have the id8 interface now. Love the customization. PEMP team thank you for the support.
Would the OEM update for the ID8 menu work on the Android 10 version of your product? I see it is just an XML file. Does it require Android 12?
Upgraded and zlink 5.3.28 consistently won't connect to Bluetooth. It starts on BT screen and restarts. The only way to connect the phone is to toggle Bluetooth on and off. Should connect automatically at start up.
Is anybody else experiencing problems with this new update? Head unit not connecting to your phones wifi or any wifi at all? If so, how did you fix it. I've been going back and forth for weeks with Pemp contacts, and they seem to be no help at all. I didn't have this issue until I updated to android 12.
The system is not upgrading the ID8. Once pushed import configuration nothing happen. A message appears "no file detected". I used the same usb fat32 formatted.
you need copy the oem file to u disk.
I have no AUX in my W221 Mercedes. Which options i have still to get a NDRPID SYSTEM ?
Android
www.amazon.com/YeeHung-Android-Display-Mercedes-2006-2013/dp/B0B885NRBB
I updated but I don’t have the id8 interface if I go factory UI Configuration I see only ID 7. Also zlink wired is not working any more 😢
1. you want to obtain the ID8 interface, you need to update the OEM file according to the video description; 2. Qualcomm 665 chip it does not support wired CarPlay, 662 chip support wired carplay, you need connect the carplay usb. please send your purchase order number to our after sales team（service@pempcar.com). They will get back to you immediately.
I updated to android 12 and now I can no longer access 3rd party apps like iTunes or Prime video when using my hotspot and not Bluetooth. This update is terrible. Please either send me the link or tell me how to get back to android 11. I purchased this head unit to be able to watch TV and videos.
Please don't worry, Android 12 features completely override Android 11. Please open PEMP Android WIFI without wireless CarPlay connection,go to connect your hotspot when it connects to the network. It can still play the third party APPs you want (of course you need to install these APPs to PEMP Android first).
@pempcar I tried that multiple times. It doesn't work. In an email you guys told me to factory reset the system, I did as instructed, and now I get an error message saying, "There was a problem communicating with Google services. Try again later. " It's been a week, and I'm still waiting for you to respond to my last email in reference to this issue.
Hi pemp i recently just got a 12.3 inch Android in my f01 bmw it works awesome except when i go to the android side i cant get any audio can you please help thanks
Dear, pls send a email to our after-sales team at service@pempcar.com
You might have to connect it to the aux jack and select that as your source (aux) like on my F30.
@@fabianjimenez2174 Yep, that's what you need to do if you don't have Android Sound.
Hello i have a bmw series 2 2017, i wanted to know if it was possible to install it alone or if it is too difficult without a professionals help. Also is there a phone number to call for information? Im from italy thank you
You can install it yourself according to the video. Because bmw 2 installation is really not difficult.
My car Mercedes W221 has no AUX. Which Android option works for my car
Dear, you need contact Mersedes team: service@yeehung.cn After you purchase the product, they can activate the AUX menu for you.
Hi, I have mekede android 12 snapdragon 662 for s class w221, can I change software to pemp android? Could you please support?
Sorry, the PEMP software is only suitable for PEMP products. I am worried that the wrong software will cause the product to not work.
on my id8 interface, the weather app says not activated where should i activate it?
you can remove the weather app on the main menu, you also let PEMP android connect the network to activate it.
@@pempcar removed them from the main page but When I open the weather app it still says not activated I can't uninstall it because it's a system app
@@KingHannes19 yes, it can not uninstall, you can open the wifi connect your phone's hotspot get the network, and you need install the gps Antenne，it will auto activate.
Hi How i can activate Weather and change the unity to KM/H into the Dashboard? Thanks
1. I suggest you move out of the Weather App, as it requires a PEMP connection to the network to be activated. 2. you can set the miles to KM in the unit selection in factory settings.
hi u can help me please ?! I have Ksw-R-M600 _OS_v2.3.6 what s my udapte after please for to have android 12 please thanks
Yes, you can update to android 12 or 13. But if your product is working fine, it is recommended that you do not update it. Because after updating to Android 12 or Android 13, their functions are exactly the same.
@@pempcar thanks to your help and u Can link me the update please ?!. I don t found the update. Giive me your email please thanks
@@Honey97one1Please send your purchase order number and current software version to our after-sales service team email: service@pempcar.com
i upgraded to android 12 but where is that ID8 interface ? ? ?
Dear , you can inter the factory settings, select the id8 option.
Dear, i just update the video description, pls try again, thanks How to get the id8 menu? Step 1. Please update your OEM file Put the oem file to your U disk, connect with PEMP Android USB, enter factory settings. Settings/factory settings/pass word 070305/Prifile import/import configuration OEM file download link: drive.google.com/drive/folders/1yKR2BvFnZ81nZEJQqQCkzde2iFxpDtTn?usp=share_link Step 2. after import the OEM file, you need to go to factory settings, select ID8 in UI Configuration, wait 10 seconds and reboot the device and you will get ID8 UI
not possible The device does not find the file from your link, so import is not possible no id8 is displayed in the factory settings
@@KingHannes19 Please put the OEM file to U disk.
@@pempcar I have the same problem. What do you mean U disk, the same usb?
I’ve upgraded to Android 12 but i can’t see new id.. it’s the same.. how can i change the menu??
you can inter the factory settings, and selct the id8 option.
@@pempcar ok yes, but i don’t remember password for factory settings
@@nicolazavaglia2607 070305
@@pempcar Great! Just.. I see only id6 id7.. 😞
@@nicolazavaglia2607 Have you successfully set ID8 now? Hope you let me know, thanks
I have the Version 2.4.2 and i have put the files into a FAT32 USB Stick. IT doenst work
Dear, can you help me check if the icon of the USB flash drive is displayed in the upper right corner? You can reformat the U disk on PEMP Android, and then copy the software for testing. If it still doesn't work, please send your purchase order number to our sales service team: service@pempcar.com
@@pempcar It works now. The only problem is the weather app does not work, it says not activated.
@@ToLoE. Yes, after upgrading to Android 12, the weather app will appear. Indeed, it is an invalid app. It is recommended that you hide it. Do not display on the main interface.
can I change the weather reference app?
If you don't need the weather app, you can disable it in settings. Because the weather APP requires location positioning and network connection to be effective.
@@pempcar I need the weather app, I have location positioning and network connection, but I want to use a different app. It's possible?
@@brunocrolli3917 This application is custom made by us and it cannot be changed.
What about android 10. How do I upgrade to android 12? I’m currently running APP Ver: Ksw-Q-Userdebug_OS_v3.9.1. How do I upgrade to android 12?
I was told to order the NBT EVO instead, but I told others about it and they said they ordered the android 11 and it runs perfectly for them. smh
sorry, Android 10 use the snapdragon 625, Qualcomm has no plans to update it to Android 12.
@@m0untainli0n1 pemp don't sell the android 11 for nbt-evo system on amazon.
@@pempcar send me a link
@@m0untainli0n1 sorry, no link. if you want buy, please contact our sales team at sales@pempcar.com
why the radio does not see the flash drive and the phone?
You need to connect the USB stick to the PEMP's USB port. It cannot check your phone. You can only connect your phone via CarPlay and Android auto.
@@pempcar thank you for your answer, I solved the problem 🫣 hahaha I put the plug from the USB bundle wrong. my fault. the radio is well designed, functional, it works without jams, a revelation