PEMP android user settings and factory settings manual
2024 ж. 23 Мам.
11 109 Рет қаралды
We received a suggestion from PEMP many users to record this video with all the setup instructions. We hope it will be helpful to you! Thank you very much for your suggestions, it will make us do better. If you have any questions about using PEMP products, please contact our after-sales service team at
Service@pempcar.com
We will reply to your email within 24 hours.
If you don't receive the email, please check in spam as many mail servers will block it.
Hi, is it possible to display the Android Auto home screen like the CarPlay one? I don't want the screen to be split in two, I don't want to display the navigator. Thank you
The Android auto interface is determined by your own settings. The following video may help you. kzhead.info/sun/nLOoXb2HhWWDoZs/bejne.html
Do you need to have wifi for all this services ? How about wireless car play ?
You can understand how to get wireless CarPlay in the following video. kzhead.info/sun/rLyrea1sgH-vias/bejne.html
I got problem in BMW E60, when I go to ANDORID SETTINGS and click on Bluootoh connections is empty there are no settings and no device to connect, I wanna connect diagnostic interface via Bluetooth but I can't any advice? How I can turn on this Bluetooth. After that, connecting the phone and music via bloototh works.
Sorry, this Bluetooth device only supports music or phone devices, it does not support other data detection devices such as OBD. If the bluetooth can't connect to your phone, you can recover the PEMP android once and test again.
@@pempcar oo, I understand, then maybe someday you will consider adding something like this in the update, it would be a really great solution, monitoring your car while driving on the radio screen :)
@@rafaradawiec5548 Great advice!
Hi, I select on the “phone key setting” for the android Bluetooth but it’s keep loading the OEM screen can you help? I can’t access zlink anymore and my phone isn’t connecting to the screen
You mean, when you click on the Android Bluetooth interface, it jumps to the OEM interface, right? If so. You need to select Bluetooth as Android in the factory settings. Settings/factory setting/pass 070305/function/bluetooth selection If I understand wrong, please email our after-sales service team: at service@pempcar.com
Hi i have a question. I have the ccc with 8,8" if i choose in factory setting ccc 8,8 the main screen is still not fullscreen and the quality is bad. I try all settings but all are bad
Do you have fix the issue?
@@pempcar yes your customerservice send me the correct mcu
Question. The car info selection does not work for me. It keeps saying no signal and glitches from BMW logo to no signal. I am wondering if anyone has had this happen and if they were able to resolve this issue.
Dear, I'm wondering if it's the OEM info that doesn't have a signal or if it's the Android that doesn't have a signal? You can verify it by long pressing the MENU button. 1. If it is OEM INFO that has no signal, it is necessary to determine whether your original radio FM station has sound? 2. if it's the Android system that has no signal, then it's most likely the Android itself that has the problem.
that finger 🤨
Hi the system recovery it is to reset factory settings? I want to reset it due to some issues I have
You can try to fix some of the issues through Recovery.
Was soll ich tun, wenn ich das Passwort für die erweiterten Einstellungen vergessen habe? Danke
@@palmyraahmad664 070305
hi, I ticked the amplifer selection aftermarket instead of oem and now it doesn't light up, what can I do?? ty
The android doesn't show anything? Can you select the Recovery menu under system info to restore factory settings?
Effectively, after I set the aftermarket selection instead of the oem selection, it no longer came on when I start the car.@@pempcar
@@starmitza96 Setting up the post-market Ampifer shouldn't have any impact on whether the product works, it only has an impact on Android sound output. You should probably check to see if it's getting power.
ok, I'll check the fuses, maybe a fuse in the panel has blown, if not I'll have to open it, thank you, I'll be back@@pempcar
which display for f20 2019?
Please take a photo of your F20 original car display screen (start and display) and send it to our after-sales service team for confirmation: service@pempcar.com
Does this unit work at all if I use an Iphone?
Yes, it support your iPhone.
is there a way carplay display could become default screen?
You mean that the Carplay interface will be displayed automatically every time the headunit is turned on, is that right? If I understand correctly. You can select ZLINK in the factory settings, and select android for memory mode.
@@pempcar yes that’s correct , what are all the steps to do that ? also when i record while music in playing… the sound doesn’t play on the video is there a fix for that ?
@@ceokhiaa Yes, if you use the same phone to play music and record video, the music will stop immediately. Because it needs to collect music for video. You have to use another phone to record. Please send your purchase order number and questions to Service@pempcar.com and our after-sales team will get back to you immediately.
I installed the screen on my bmw f30 today and i dont have touchscreen function
The touch function only in the Android system, in oem system no touch. if you still get the touch funcition, please contact our after-sales team at Service@pempcar.com
I connected the system i start the car but not aftermarket system came on
Please check if the wiring harness is connected correctly? Is the android system powered on?
Why cant i get into car info?
1. Please check if your OEM radio is working properly? 2. Is LVDS 6PIN or 4PIN, and does it correspond to the OEM wiring harness? 3. If it still cannot be solved, please contact the after-sales service team Service@pempcar.com
What is the password for factory settings?
070305
1314