How To Change Drive Sprockets and Idlers on an Yanmar Excavator
Пікірлер
You’re inspiring Todd. Seriously, I like several other channels, but yours has a true “down to earth” feel. I can relate more to you. Thank you for providing this content. I usually say …. “comment for currency” because that’s really what it is and dam it, you deserve every dime and more!
@FlyingCircusAct Жыл бұрын
I don’t know, those sprockets looks like a lot of life into them yet. We they jumping?
@donaldkennedy5604 Жыл бұрын
looked like to me you had a lot of life left in those sprockets and idlers. I usually wouldn't recommend putting new ones on old tracks either. Best to let them wear together. What was your reason for changing them out?
@topshelf321 Жыл бұрын
My thoughts exactly...
@smclynden6 ай бұрын
I think he was just trying to avoid tracks coming off on a job... He may have been told to change 'em and didn't know better until they were side-by-side. I agree... would have just added grease to tighten for any job with inclines and waited until the tracks were shot and replaced it all at once. I haven't seen the entire Idler replaced before... i thought there was a bearing in it you could swap out.. idk. Good Video tho 👍
@georgehofgren61232 ай бұрын
that impact your using is for driving screws in wood it's only 1300 inch pounds.
@anthonyyoung7344 Жыл бұрын
I like watching you with your employees. Its good to see someone treat them with the respect that you do. Keep up the good work and videos
@robbray3088 Жыл бұрын
Great content Todd, Truck and Track got your back
@wenotme2023 Жыл бұрын
Looking good glad to see you're staying busy!
@DMHRC Жыл бұрын
Truck or Track! So happy to see your business grow, well deserved!
@365woodworks Жыл бұрын
Good job bud ! I know those suckers are heavy to Muscle around
@DirtBrute Жыл бұрын
Truck or track! Sure made that look easy. Well done!
@jeremyj612 Жыл бұрын
Wish they were compatible with my IHI excavator ! You take off better stuff than most of us run!!!
@kevinblevins26128 ай бұрын
Hey great video Randy Johnson in Kentucky.
@randyjohnson4877 Жыл бұрын
love your stuff keep up the great work truck or track
@peteraustin2203 Жыл бұрын
Truck or Track !! Nice job sir , keep the videos coming !!
@joeyannas7828 Жыл бұрын
Aloha Todd , Just wanted to drop in and see how things are going , as usual , looking good . I just changed tracks on my Takeuchi last week . It didn't go as well for me but we got it done . We didn't have much space to work in so it was not a good time .
@DaleDirt Жыл бұрын
I'm glad you know how to work on them it's cheaper to do it yourself and take it to your garage
@larryshumakerhihvv5294 Жыл бұрын
Muscling that stuff around like it's nothing!! 💪
@MyTractorGuy Жыл бұрын
truck or track - rubber tracks may look light, but they are crazy heavy
@rickosterman7328 Жыл бұрын
Howcome you changed the sprockets? they still looked like they had plenty of life left. just being safe because of the hours on it?
@berkoskilandscaping4247 Жыл бұрын
Funny thing Todd. You just did what I was just planning. Funny 😁 😂
@NeboGold Жыл бұрын
Truck or track , Todd another 5 ⭐ video and hopefully the tracks stay on the yanmar and as always God bless y'all from Gaffney South Carolina viewer 🙏❤️💯
@daniele.woodhead1218 Жыл бұрын
Truck or Track have done you proud with the new parts, many more hours of worry free trackin
@ianbirkmyre4622 Жыл бұрын
Good job.... Truck or tach... Have a great weekend..
@brentking-gmailking2570 Жыл бұрын
Thanks Todd digging life getting it done ✅. Go for it 😃😃😃🤣👍👍❤️ it. Take care of yourself and family.
@michaelweatherhead9470 Жыл бұрын
truck track...wait truck, or track...or is it trucker track. good stuff man!
@hcr-motorworks Жыл бұрын
Truck or track Todd is real good
@oklahomachris6298 Жыл бұрын
All caught up. Found your channel about a month ago. Started watching all the vids oldest to newest. Just got caught up.
@65BAJA Жыл бұрын
Thank goodness for Truck or Track!! Great videos as always. Too bad you don’t have a Mississippi Division… I have a bunch of projects you could do.
@timkd5vmv583 Жыл бұрын
I believe that if you had to make a choice between "Truck or Track", you would take track every time. 😁👍
@johngersna3263 Жыл бұрын
Truck or track , long time watcher first time commenting because I usually watch your vids on my tv and cant comment .
@ryanluiken4320 Жыл бұрын
Truck or Tracks Good video Never have seen them replaced before now I know
@gayle4804 Жыл бұрын
Truck or track good video!
@10rcoleman Жыл бұрын
Hey Todd 👍🏻
@babsyred9710 Жыл бұрын
Well Todd you made that look easy but I know it's not as easy as it looks. 😉
@glynngrauer3962 Жыл бұрын
Truck or Track I hope your tracks dont give you problems . But i think if it does it will be a case of pumping more grease into the tensioner . Keep up the good work Todd . i am from the UK but live in Thailand . Take care and work safe Todd
@thailandfan1651 Жыл бұрын
I finally caught what you are saying at the beginning of the video , Welcome to the Todd cast .....Great intro and video content
@williammeiklejohn2850 Жыл бұрын
Great video.
@marcelrobert9178 Жыл бұрын
Thanks Marcel!!!
@DigginLife21 Жыл бұрын
Truck or track Ed from Chicago 🙂
@edgundlach2811 Жыл бұрын
Leave the same machine. What’s easiest way to get to the belts. And do you use factory belt replacements? If not what brand and or number
@swampgatorulm Жыл бұрын
Truck or track
@michaelkoon83712 ай бұрын
nice video..
@jeanmi974caterpillar3 Жыл бұрын
Truck or track.
@duke3419 Жыл бұрын
Pro tip, spray WD40 in your socket before you pull out a bolt and it comes out much easier, TRUCK or TRACK . I've worked in a tooling department for years and give 5 stars for the cleanliness and lube on your machine.
@Cotton2Ennis Жыл бұрын
truck or track
@workingwithadam Жыл бұрын
Truck or Track
@johnroberts1509 Жыл бұрын
What was the point of replacing them? They looked like they were in great shape
@belllpatrick Жыл бұрын
The bearings were wore causing the tracks to kick off constantly.
@DigginLife21 Жыл бұрын
More frequent greasing should help maintain proper track tension to reduce slipping. Of course, you can see the sprocket wear MUCH better in person than we can through the camera. Still, I'd say try keeping those new ones greased up and you should see better results. Your proactive approach to maintenance is better than negligence on either truck or track. 😎
@bp5558 Жыл бұрын
👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️
@carljones3515 Жыл бұрын
Interesting and educational to follow your you-tube channel. Why did you switch drive sprockets and Idlers? I thought they looked good. Greetings from Sweden
@michaelhansson4672 Жыл бұрын
Truck or track!
@chriselliott2364 Жыл бұрын
Truck or Track!
@thomassawyer820 Жыл бұрын
Seems like there should be a less messy way… lol
@WizzardMcCoy Жыл бұрын
TRUCK OR TRACK
@albertcrawford1922 Жыл бұрын
Truck or Track!!!
@nickmills5814 Жыл бұрын
I thought the name of the excavator shall not be called out.🤨🤨
@maxmacdonald7174 Жыл бұрын
Invest in Milwaukee mid torque and high torque M18 fuel impacts. Get rid of that DeWalt garbage. 😀
@daved70242 ай бұрын
Thanks for vote Dave!!! I’ve had some Milwaukee in past. Definitely high quality tools
@DigginLife212 ай бұрын
There was nothing wrong with the sprockets or idlers…. Why did you replace them??
@justrepaa6045 Жыл бұрын
Need to get some real tools if you intend to service your own equipment...can't use a 1/4" impact to remove 7/16" bolts....
@MidwestToolReview Жыл бұрын
Haven't you learned anything from the series "Gold Rush" Never---Never perform maintenance on any equipment until you are in the middle of a big job and only after those parts literally rust or fall off!
You’re inspiring Todd. Seriously, I like several other channels, but yours has a true “down to earth” feel. I can relate more to you. Thank you for providing this content. I usually say …. “comment for currency” because that’s really what it is and dam it, you deserve every dime and more!
I don’t know, those sprockets looks like a lot of life into them yet. We they jumping?
looked like to me you had a lot of life left in those sprockets and idlers. I usually wouldn't recommend putting new ones on old tracks either. Best to let them wear together. What was your reason for changing them out?
My thoughts exactly...
I think he was just trying to avoid tracks coming off on a job... He may have been told to change 'em and didn't know better until they were side-by-side. I agree... would have just added grease to tighten for any job with inclines and waited until the tracks were shot and replaced it all at once. I haven't seen the entire Idler replaced before... i thought there was a bearing in it you could swap out.. idk. Good Video tho 👍
that impact your using is for driving screws in wood it's only 1300 inch pounds.
I like watching you with your employees. Its good to see someone treat them with the respect that you do. Keep up the good work and videos
Great content Todd, Truck and Track got your back
Looking good glad to see you're staying busy!
Truck or Track! So happy to see your business grow, well deserved!
Good job bud ! I know those suckers are heavy to Muscle around
Truck or track! Sure made that look easy. Well done!
Wish they were compatible with my IHI excavator ! You take off better stuff than most of us run!!!
Hey great video Randy Johnson in Kentucky.
love your stuff keep up the great work truck or track
Truck or Track !! Nice job sir , keep the videos coming !!
Aloha Todd , Just wanted to drop in and see how things are going , as usual , looking good . I just changed tracks on my Takeuchi last week . It didn't go as well for me but we got it done . We didn't have much space to work in so it was not a good time .
I'm glad you know how to work on them it's cheaper to do it yourself and take it to your garage
Muscling that stuff around like it's nothing!! 💪
truck or track - rubber tracks may look light, but they are crazy heavy
Howcome you changed the sprockets? they still looked like they had plenty of life left. just being safe because of the hours on it?
Funny thing Todd. You just did what I was just planning. Funny 😁 😂
Truck or track , Todd another 5 ⭐ video and hopefully the tracks stay on the yanmar and as always God bless y'all from Gaffney South Carolina viewer 🙏❤️💯
Truck or Track have done you proud with the new parts, many more hours of worry free trackin
Good job.... Truck or tach... Have a great weekend..
Thanks Todd digging life getting it done ✅. Go for it 😃😃😃🤣👍👍❤️ it. Take care of yourself and family.
truck track...wait truck, or track...or is it trucker track. good stuff man!
Truck or track Todd is real good
All caught up. Found your channel about a month ago. Started watching all the vids oldest to newest. Just got caught up.
Thank goodness for Truck or Track!! Great videos as always. Too bad you don’t have a Mississippi Division… I have a bunch of projects you could do.
I believe that if you had to make a choice between "Truck or Track", you would take track every time. 😁👍
Truck or track , long time watcher first time commenting because I usually watch your vids on my tv and cant comment .
Truck or Tracks Good video Never have seen them replaced before now I know
Truck or track good video!
Hey Todd 👍🏻
Well Todd you made that look easy but I know it's not as easy as it looks. 😉
Truck or Track I hope your tracks dont give you problems . But i think if it does it will be a case of pumping more grease into the tensioner . Keep up the good work Todd . i am from the UK but live in Thailand . Take care and work safe Todd
I finally caught what you are saying at the beginning of the video , Welcome to the Todd cast .....Great intro and video content
Great video.
Thanks Marcel!!!
Truck or track Ed from Chicago 🙂
Leave the same machine. What’s easiest way to get to the belts. And do you use factory belt replacements? If not what brand and or number
Truck or track
nice video..
Truck or track.
Pro tip, spray WD40 in your socket before you pull out a bolt and it comes out much easier, TRUCK or TRACK . I've worked in a tooling department for years and give 5 stars for the cleanliness and lube on your machine.
truck or track
Truck or Track
What was the point of replacing them? They looked like they were in great shape
The bearings were wore causing the tracks to kick off constantly.
More frequent greasing should help maintain proper track tension to reduce slipping. Of course, you can see the sprocket wear MUCH better in person than we can through the camera. Still, I'd say try keeping those new ones greased up and you should see better results. Your proactive approach to maintenance is better than negligence on either truck or track. 😎
👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️
Interesting and educational to follow your you-tube channel. Why did you switch drive sprockets and Idlers? I thought they looked good. Greetings from Sweden
Truck or track!
Truck or Track!
Seems like there should be a less messy way… lol
TRUCK OR TRACK
Truck or Track!!!
I thought the name of the excavator shall not be called out.🤨🤨
Invest in Milwaukee mid torque and high torque M18 fuel impacts. Get rid of that DeWalt garbage. 😀
Thanks for vote Dave!!! I’ve had some Milwaukee in past. Definitely high quality tools
There was nothing wrong with the sprockets or idlers…. Why did you replace them??
Need to get some real tools if you intend to service your own equipment...can't use a 1/4" impact to remove 7/16" bolts....
Haven't you learned anything from the series "Gold Rush" Never---Never perform maintenance on any equipment until you are in the middle of a big job and only after those parts literally rust or fall off!
LOL
Truck or track!!!! Truck or track!!!!
Truck or track.
Truck or Track
Truck or track
👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️
truck or track
Truck or Track!
Truck or track
Truck or track
Truck or track
Truck or track