Tutorial: How to drill into reinforced concrete
We show you, what you have to look out for drilling in reinforced concrete and which tools are well suited.
_________________________________________________________________
In this video we used the following tool:
Hammer drill bit Trijet SDS-plus: www.hellertools.com/en/produc...
Hammer drill bit Enduro Y-Cutter SDS-max: www.hellertools.com/en/produc...
Do you need tools for another application? Then use our online Application wizard: www.hellertools.com/en/applic...
_________________________________________________________________
Visit us:
Website: www.hellertools.com
Facebook: / heller.tools
Instagram: / heller_germany
_________________________________________________________________
Heller Tools - The right tool for every application - From professionals for professionals.
In our Heller tutorials we will show you how you can quickly and easily carry out any manual work - always with the right tool, of course.
Thanks for this information
how many seconds it take to do 1 cm depth hole?
Can I find this bit in Nigeria? 50mm diameter and 700mm length I want to drill rcc thanks
I bought new bosch universal impact 700 watz but the problem is, the drill bit always loosen, when i drill the concrete.
What is power of drill machine?
Can the drill stay on hammer mode when drilling through rebar or must you put it off , off of hammer and on normal mode?
I am drilling into my ceiling of my apartment and it is concrete. Not sure if it is reinforced or not but I am making almost no progress. I have a DeWalt 18V impact drill and masonry drill bits. Am I missing something?
I'm ruining many drill bits, probably because I'm increasing pressure. I shall attempt to let the drill do the work at moderate pressure. Would you also recommend the same approach on steel beams?
If the steel beam is embedded in concrete, this would be the right approach. For pure steel we would recommend that you use a HSS drill bit.
@@HellerToolsGmbHDinklage Thank you - your tip helped me install 5 window blinds this weekend, all using the same drill bit!
If you lubricate the drill bit as you drill it lasts much longer.
Sir if we drill rcc column due to lack of quality , is footings get damaged or not!
This is subject to various factors, such as quality of the footing, length and diameter of the drill, angle of operation (just to name some). In general, you will probably break anything you hit with the drill. Your responsible structural engineer will most likely be able to answer your question in detail.
👍
Will a normal masonry bit work?
It is very important that you use a rebar resistant drill bit. A normal masonry drill bit is not the right choice for this kind of application.
Its ok to cut armature?
As stated in the video (kzhead.info/sun/gsaukZacbKCafoE/bejne.html) we strongly recommend to talk to the responsible structural engineer before cutting any reinforcement.
Are these drill bits available in South Africa
Yes, please have a look at www.multifix.co.za/
I cool them in water . They last longer
when th drill bit meet iron bar inside the concrete will it pass through
Yes, the Heller Trijet is a rebar resistant hammer drill bit. Our tip: once you feel the rebar (no progress anymore), just continue drilling with low pressure until you break it. With too much pressure you only would glow out the carbide tip and then basically it is broken.
@@HellerToolsGmbHDinklage What does "glow out the carbide tip" mean, and how can I tell if I've done it?
@Ex0dus111 The drill bit gets too hot because of the pressure. The outcome is that the material might become fragile so that the drill bit tends to break while using it any further. You can identify a glown out drill bit by the discolored metal.
@@HellerToolsGmbHDinklage Discolored... black or kinda flame colored?
@Ex0dus111 That depends on the temperature.
I am having a problem at work .....I have to something I need light on
*Something I want to verify
Could you specify your request, please?
Why the echo
As the original speaker text is German and we initially thought it might be useful that the audience can hear the German voice a little bit in the background. Meanwhile we learned that this was not our best idea. So we will do without it in future tutorials, we promise!
M about to do this in a 20 storey skyscraper with 200+apts Wish me luck
online supplier india
Why the hell do you have a voice over the original voice? I can't even understand the English version because of the backing german. I did not finish watching the video as that is very annoying, nor did I look at any of your other videos because of it.
Hi Jason, sorry that the original German Voice bothers you. We will take this into account for future videos. Thanks a lot for your feedback that helps us to enhance our content.