Mini Gun Restoration - Glock 17 Cal .11
Restoration of Glock 17 mini gun. In this video I will restore and repair a very little gun in caliber .11. I will also try to test shoot it with real ammunition.
About the Glock 17 mini gun
This little handgun was sent to me to restore by a subscriber from this channel. The package was very anonymous, so I do not get much information about its origin and what happened to the Glock.
The restoration process
I started by removing some of the rust so I could get an overview on how to disassemble this little Glock 17 handgun. I disassembled the gun. There were many parts, and this gun restoration was much more complex than I first thought.
The gun slide was stuck, so I had to carefully hammer on it to make it movable. When I removed the magazine there were two non-shootable dummy cartridges inside, cute mini ammunition.
When everything was taken apart, I sandblasted the gun slide and the magazine, and all the other metal parts were cleaned in my mini tumbler. I cleaned the gun frame in hot soap water and gave it some plastic coating.
I reassembled the Mini Glock and used a lot of time to get all the gun parts at the right place. I did a very cool snakeskin laser engraving on the gun slide and engraved the words “MINI GLOCK” on the magazine. I think this restoration video turned out very well. A lot of close-up video roll.
In the end of the restoration video I test shoot the little Glock 17 with 1 shot of caliber 0.11 that a friend’s friend produced special to me - its like fireworks not real ammo.
This ended up being a very cool video. Please subscribe if you want to see more cool upcoming projects 🙂 And DON’T FORGET TO SEE my MINI ZIPPO RESTORATION: • MINI Zippo Lighter Res...
I you have something very interesting for me to restore like this mini gun, you can contact me thru my Instagram.
Thanks for watching my channel. See you soon.
Best wishes and stay safe ❤ Martin.
I'm always amazed how he can remember where everything goes back lol. Such a joy to watch!
thanks so much, glad you liked to watch :)
When you film the entire process, I would assume it's a whole lot easier to put back together afterwards. =p
My thoughts exactly 😮
It's almost as if he planted it in a solution to "rust" it for this video.
@@jackshettya think?!? 😂
I don’t think I even know how to properly use a screwdriver - yet I am DEEPLY invested in this channel’s content. The relaxation these videos give me before bed is absolutely UNMATCHED.
Hey Amy - You can learn how to use a screwdriver 😉 thanks for watching my videos :D
3:47 neither does he 🤪
@@AwesomeRestorationsI appreciate your encouragement and belief in me. However: I’m going to need a slow-motion screwdriver technique breakdown in your next video because even “righty tighty, lefty loosey” isn’t helping me at this point and I’ve now left holes in my dad’s drywall. Once he notices I may not survive much longer… so the quicker the video, the better 🥲 Sincerely, Screwed.
@@AwesomeRestorations Подскажите пожалуйста какой у вас играл саундтрек в конце видео!!!!!
I'm so glad you have the skill to bring this back. It would have been a shame to let something like this dissappear. Impressive!!!👍
Thank you very much!
3:24
I love to see it when people get the rust out of plastic parts, it's so satisfying!
I'm very glad you like my content. Thanks for watching 👌👌
I got what you meant 😁
Utterly speechless brother. To take the old and make it functional and even better than before is a true show of your master craftsmanship . Unbelievable and amazing. Peace, live and respect brother
thank you so much for your comment ❤😊
That’s without a doubt the smallest working hand gun I’ve ever seen. I’ll bet you made the people at Glock proud. Well done indeed sir. 👍👍
The Slow Mo Guys also have a very tiny gun they use on there channel.
You can buy these my dudee
Where do I buy one?
Beretta is better!
They did “key ring guns” half the size in the early 2000s nothing new
Great video, that little gun was so complex, well done putting all the bits back in the right places
Работа просто блестящая!!!! Спасибо!!! Самый лучший блогер в реставрации!!!! 👍👍👍
thank you so much I appreciate it 😊
Такой маленький пистолет, а потребовал большой и кропотливой работы! Довольно много мелких, но нужных для работы деталей. Нельзя потерять ни одной. Лазерная гравировка добавила красоты!
Какой же это пистолет, это пресс-папье.
@@miha4096 любой тяжелый предмет уже пресс папье.
Здравствуйте. Как всегда приятно смотреть на ручной труд. Удачи всем.
thank you so much :)
Now thats a real MINI gun
I love your restoration vids so much. I don't watch often, but when I do, I'm always blown away by your skill
thank you so much I am glad to hear you like them :)
Olá do Brasil 🇧🇷, seu trabalho é perfeito do começo ao fim, muito cuidadoso misturado com criatividade 👍👏👏👏.
thank you so much 😊
Возрождеие легендарной " машинки"))).❤ Смотрела с интересом. Пожалуйста, не надо держать фонарик во рту, это небезопасно. Возможно, Вам помогут специальные очки с подсветкой или лупа с встроенным фонариком. Эти вещи можно купить в магазине для швейной работы. Желаю Вам дальнейших успехов. 👏
thanks for your comment 😊
It is a clear example of what can be done when talent, vocation and technique come together: a work of art. Congratulations
many thanks for your kind words 😊
This was really awesome. We were almost disappointed but you came through and fired it for us. Great job on the restoration. Now, where can we get one? Seriously, this Glock 17 Mini restoration was fantastic. Congratulations.
Glad you enjoyed it! I don't know where to get such a little Glock this was sent to me :)
i know somewhere you can buy a glock like this, but it is just a model and wont fire, this is also a model, the firing is edited
@@dude4512aliexpress, alibaba etc
They’re made from a company called alloy empire
@@Madout-ui1sj Thanks. 👍
Впервые вижу такой Глок. 😃 Работа сделана как всегда на отлично. 👍🏼
thank you so much
@@AwesomeRestorationsещлщ
Marty, great vid again. But why are all you workpieces - even the plastic parts - so rusty? Where do you get them from?
Because he fakes it.
@@caferon I mean either way it's impressive
I love the sounds of the rain while watching, just adds calm and relaxing vibe
thanks I am glad you like it :)
Que perfeição ❤ sempre venho aqui 🇧🇷
muito obrigado :)
@@AwesomeRestorations ❤️
That was an absolute pleasure to watch, satisfying as well. Incredible attention to detail and amazing talent! Your clients/customers must be amongst the happiest in the world.
Thank you very much!
Good job 👌but please say this NOT A REAL GUN@@AwesomeRestorations
عمال ريع
Never seen one that small before. Ya did an awesome job on that resto Martin. Always a pleasure watching your restorations my friend. 😎
thank you so much
Wow, next level on your part, truly amazing the work you do!
thank you so much :)
I appreciate you bringing back the bird and rain sounds. It makes all your videos so relaxing! Also I love watching the sandblasting so maybe others feel the same so you don’t have to edit and shorten that part
Agreed
thank you so much - I know many people like the sandblasting part but I think you would get bored if I did not shorten it down 😊
@@AwesomeRestorations I totally get it! Thanks for the response. You do an amazing job
Fe no es de noche nojoda deja eso es bueno pero si te gusta q seas
You're the only restoration channel I follow. Mostly because your content is very relaxing and enjoyable. It's also why I hit like before the video starts -- I know it's gonna be a nice chill video with something cool at the end.
thank you so much I am very happy to hear that. Have an awesome day 😊
@@AwesomeRestorations Go back to rfeal restorations please, this coating something in oil for a week and leaving it to rust is boring.
I always enjoy the background noises you add, they seem to make it more relaxing!
thanks glad to hear that :)
I've gotten a little behind on things brother, so sorry for that! This was a fun video to watch; as a former gunsmith, your skills with weapons is impressive! Your miniature gunsmithing on this piece was superb, very well done. Thanks again Martin, for your great videos. God bless. Rev. D.
😊😊ئر،ل،ششۺشڤ
In this video I restore a mini Glock 17 - Please let me know what you think! 👍ALSO SEE me restore the world's smallest Zippo lighter 👉 kzhead.info/sun/qquspKltnoJ3q4U/bejne.html 👈 Best wishes and stay safe ❤Martin
AR 😎👍👌🎶🎵🎸
I legit thought this was just a GOAT gun until u fired it.
Stunning 💯🎯 Yr on fire i.e. shit Hot 🔥 all the stuff I've watched 🤩 it's I'd say mental ballance KZhead healthy time out sense of achievement Good Vibes thank You fine Sir much appreciated 😁
@@dahnparker8014 AI or Chinese?
G19 not 17
Hola, ya te echaba de menos. Me dejas alucinado, creí que no sé podía restaurar. Recibe un fuerte abrazo de este suscriptor. Hasta siempre ❤
thank you so much. Many hugs from Sweden ❤
Eu jurava que dessa vez você não conseguiria restaurar, mais ficou melhor que uma arma nova. Parabéns.
thank you so much glad you liked it 😊
You have excellent techniques for applying rust and dirt to look convincing. 👍🏻
Thanks 👍
Oh man, this is an awesome little restoration. It amazes me the way you take these extremely rusty items and turn them into beautiful works of art. Very well done my friend and 2 thumbs way up. Also I absolutely love your channel!!
thank you so much for your kind words I really appreciate it 😊
You're so welcome. Thank you for bringing your wonderful talent to us so we can enjoy it!
Отличная работа!👏
thank you so much 😊
Didn't know plastic rusts. Guess you learn something new every day.
Absolutely fascinating!! My favorite video of restoration thus far!!
Glad you enjoyed it! Thanks a lot :)
1st! Awesome vid as always Martin
Legend!
Nope, I'm first!
This restoration is simple super awesome! It's fantastic how good the final project was. Congrats Martin for such fantastic video. I hope to see more new restorations incoming! Take care and stay safe my friend. And one more time. The gun final project is awesome!! 10/10!
thank you so much I really appreciate it 😊
I honest to God didn’t even know this caliber existed! Man that Is one gun for assassins! (Baby squirrel assassins)
Holy cow! I loved this! That little gun is so dang cute. I was holding my breath as you set the pieces in place! What a fun collectors piece. Man, I wish i owned that🖤 jealous in michigan……😭
thank you so much I am glad you liked it 😊
I love thé little tumbler is back 🤓, I love the ASMR feel and the relaxing background sounds also. The attention to detail and the artistry. U are still a big favorite of mine!! fantastical🎉🫶🏼
Thank you! 🤗 so happy to hear that
Flawless work as always, now with a laser touch! Love to see an old marksman rifle being restored! Keep up the work, your video skills are brilliant!
thank you so much for your kind words ❤
Its curious that the plastic is even rusted
Hands down the nicest restoration I’ve ever seen
thank you so much 😊
That was a joy to watch!! Made me want a full size version
thanks a lot glad you liked it 😊
in my experience. that's an average size
🤨
Their telling the truth, and I can prove it
That's what she said
Lol
Depends on who is asking 😅
Another fine piece of work. Although, by now, I think I'd pass out with shock if it was anything other than near perfection. I especially love a good bit of sandblasting. There's nothing finer than seeing a crud encrusted piece of metal start to reveal its inner glory. Thanks Martin.
thank you so much Mark I am really happy you liked it. I also think it turned out very nice. Have an awesome day my friend 😊
Eres un máster, mis respetos, un genio de la restauración, mi admiración y toda mi confianza para ti, amigo, saludos de tu amigo Gabriel Héctor Espino Barrón, desde San Vicente Chicoloapan estado de Mexico.
Really enjoy your videos not only to watch the process but also to enjoy your subtle wit. BRAVO!
Thank you very much!
I can’t stand it when my plastic rusts…
Yes yes. Due to unrestoration process.
ikr XD
It wouldn't bring in as many views if the title said, "polishing and engraving my slide and magazine". They had to throw a little spice on it.
@@ZVVWVVZ😅😂😊
Восхищён ювелирной работой,маэстро!
thank you so much
Rare! Absolutely beautiful work! Thank you for sharing this!
Glad you enjoyed it!
WOW! I have never seen a .11 caliber gun! Your restoration was fantastic as always, but the snakeskin engraving was inspired! Engraving the magazine was icing on the cake. I hope Glock saw this video!
Thank you very much!
Awesome ❤
Thanks 🤗
That was so cool to watch! I'd love to know the background on such a small working handgun. I didn't even know they existed.
Nether did I and I’m a glock guy for the past 20 years. 🤯
Came out pretty sweet. I had no idea there was mini Glocks. That shoot mini ammo. I want one now.
I was doubting the snakeskin etch until the reveal... I like it a lot. Well done. The lettering looked sharp too.
Thank you very much!
Это потрясающая работа! 👍👍👍
thank you very much 😊
Don't you just hate it when your plastic rusts? fml
It’s for fun 😊
That salt and pepper tumbler is incredible. I will definitely be using that.
👍👍
Hello 👋 I'm from IRAQ 🇮🇶 That was a good job 👍👌
thank you so much :)
@@AwesomeRestorations will come my Brother
Ficou muito top parabéns!
muito obrigado :)
You are the best! Thank you for this great restoration. Greetings from Argentina :D
thank you so much Federico 😊
Super awesome man! Great attention to detail an that engraving work is next level!
Thank you! Cheers!
What a pretty little bit of hardware! The laser work made it stunning. I love it, but I’m a Glock lover.
Sincere felicitări pentru felul în care restaurezi aceste lucruri minunate, i-ai făcut mândri pe cei de la glock, îmi place magazia de gloanțe, inscripția și desenul de pe armă 😊
thank you so much I appreciate it :)
Una vez más vuelve a hacer su magia,si no estuviese filmado nadie lo creería.Que trabajo más admirable.
I want to see how he fakes the erosion and rust that just washes off! LOL
No es la misma pistola
of course it is the same
@@danquaylesitsspeltpotatoe8307 FR
Tú eres muy bueno, para erreglar, las cosas, necesitas tener mucha paciencia para hacer lo que haces. Siempre es bueno ver videos diferentes, todos hablan de guerra, y tú nos enseñas que existe una vida diferente. Gracias por la información. Saludos desde Boston Massachusetts
Thank you so much for the kind words, cheers👍🍻
動画拝見させていただきました。 あなたの技術は素晴らしいです! Glock17は私が中学生の時初めて買ったモデルガンでしたので、すごく懐かしく感じました。 しかもかなり小さい物で、細かな部品まで修復できるのは本当にびっくりです。 これからも頑張って下さい!
Oh wow, I have the regular sized version of this same gun. I had no idea this even existed. What an incredible restoration. Your skills never cease to amaze me. Just awesome 👌 Wow
thanks so much glad you liked it :)
Отличная работа друг👍
thank you so much :)
Back from Egypt today. Wonderful way to start the evening! Outstanding work! .... as always .... And the famous "little sqeeze" of WDxx ... love it!
thank you so much I am really happy you liked it :)
nice rain sound in the background 👍
glad you liked them
Once again outstanding 👏🏻 how u remember where the parts go is beyond me😂
thanks a lot. It was difficult this time to remember I admit that - but I managed to get it all back where it belonged :)
You're good superb 👌🏻
Очень шикарная работа,как всегда.всегда интересные работы показываете,но и Сова и Косуля как всегда порадовали.Вы очень крутой мастер.
thank you so much :)
I like the silver slide. It's more interesting to look at than plain black
Wow.......just WOW. This is artistry in it's purest form.
Loved the CGI at the end of the video as well when firing it. But still, a great video. Subbed.
thank you so much I appreciate it 😊
This guy buys shit, buries it in the garden, digs it up a few months later and viola a new video!
Yes .... 🤔
Pode ser pequena, mas é letal igual a irmã Glock maior. Parabéns, a restauração ficou perfeita.
thank you so much
what’s to say… you have godlike powers of restoration. I can only bow low.
thank you so much
@@AwesomeRestorations At a level below your capability, I was apprenticed for many years under a master craftsman (who never would have called himself that). I was the "young buck" and he was at that time about 72 years old. Your skill reminds me fondly of his, along with my constant effort to "catch up." I really appreciate your amazing talent, understanding of your tools, when to apply which tool, and the analysis that you must apply to know when to do what. Most instructive lessons in life. Thank you!
That was amazing. Even more amazing is it shoots. I wasn’t expecting that.
thanks, glad you liked it 😊
Você, como sempre, arrasando. Muito bom. Parabéns!!!!!!!!!!!!!!!!!!!!!!!
muito obrigado ❤
Me impresiona cuántas piezas tiene un objeto tan pequeño. Bella restauración.
The mini tumbler machine is so smart yet so simple...great videa✌️👌✌️
thanks a lot glad you liked it 😊😊
Just wonderful. And for me - added environmental sounds back again. ))
thanks a lot glad glad you liked it
looks artificially rusted. can you show how you did it, or did you just mess it up for a while?
I don’t think he’s faking this ?
Hello Martin good to see you my my friend that was awesome 👌 for sure I've never seen a gun so little before and Buddy it was a amazing experience for me to watch you fix it..hope you have a wonderful blessed week ahead of you.
thank you so much David I also wish you an awesome week :)
0:51 the captions: a little squeeze of the WD41 might help This guy: *puts a big amount of WD41*
nooo just a little squeeze 😉
The restoration was amazing, but i'm in awe that there is such a small working gun
thanks, glad you liked it
Your work is truly remarkable! Thank you for putting out videos more frequently, me and the rest of the community appreciate it!
thanks for watching :)
Это потрясающе, как всегда! Спасибо за видео! Надеюсь, что у тебя всё хорошо! : )
thank you so much yes all good here :)
I’m a Sig girl, but this was very fun to watch! I had no idea Glock made one so tiny. Lol!
thanks I am glad you liked it 😊
“You’ll shoot your eye out!” 🙃😂 Watching you bring order out of chaos is very enjoyable. I look forward to your videos.
thank you so much :)
Why the shot at the end is fake :c
That so funny to see on x0.25 speed, he litteraly added a bullet in the air with FX
Yeah :c@@ThingsYouMightLike
The rain and thunder is amazing in the background
thanks, I am glad you think so :)
LOVE the rainstorm sound.
thanks a lot I am glad you think so :)
I LOVE IT!!! Mind blown on how awesome it turned out!!! Perfection once again!! ❤🎉
Thank you so much! my friend :D ❤🎉... there will be another video out tomorrow ;-) have a great weekend
@@AwesomeRestorations you as well!! 🙂 Can't wait to see it!!
Just been amazed the work you just pulled. Thanks.
Glad you enjoyed it!
Sweet restoration. Love the engraving.
Thank you very much!
Masterful work. A GREAT pleasure to see. Thank You!
thank you so much for watching 😊
One of the best videos on KZhead!!! I wish I knew how you did that with the snake design