I never saw the inside of a compressor.what a lucky I saw this vid!
@jwijn13 күн бұрын
I don’t want to hate on the guy, but I didn’t see the guy fill the pan with oil, resurface the armature, or replace the brushes, and like someone said, the bearing. This isn’t going to last very long. But I like I finally see what is inside one of these.
@cfauvel2 ай бұрын
Well, he did a nice paint job & added some misleading labels.
@ramtek270211 күн бұрын
Replace the brushes? There aren't any. Rotor was probably good even though it had scuff marks on it. It looked like he had the stator rewound. Bearing, being in oil, he might have changed it or he might not have. But it comes down to cost. Just breathe in the paint fumes! Over the years, I've seen some amazing repairs in these out of the way places, whereas on home turf, we'd just bin it.
@bertiesworld7 күн бұрын
Rotor, not armature
@TheRobWay16 күн бұрын
@@bertiesworld so all it needed was a pair of gaskets.
@cornwallav8r4 күн бұрын
Armature and brushes are very hard to find on a hermetic compressor 😂.
@tonyfrewin482215 сағат бұрын
I have so much respect for these people who actually fix things instead of just being parts changers. And with conditions and equipment that would make people in this part of the world cry like babies. There's never a shortage of comments from the safety na2i's under videos like these.
@magnusatheos73016 ай бұрын
Agreed I’ve been in the hvac industry for 30years and never have I seen a compressor repaired, it’s scrap metal. I will say the labor involved to do this would probably out weigh the price of a new compressor especially with having to weld it back up and if the union is involved. That was some good efficient workmanship we just watched.
@MK-xl9tt5 ай бұрын
It's not like people wouldn't be willing to do this in America lol.. it has everything to do with cost of labor
@jnhook80862 ай бұрын
@@jnhook8086 And with a new compressor you get a manufacturers warranty. Even the 11kw motors we use (much bigger than shown here) are no longer repaired. The cost of taking it apart, fixing the fault just doesn't make it cost effective - a faulty bearing we might change but again if the rotor has been hitting the stator - not good. Far cheaper to just get new.
@bertiesworld7 күн бұрын
I’m sick of living in a country of people that throw out $3,000 refrigerators when the little round black $2 capacitor goes bad. But I found a niche. I visit my local scrapyard once a week to look for old tools, appliances etc and I fix them to like new quality for literal pennies in parts and a bit of elbow grease. I have great satisfaction in using old snap-on wrenches and power tools that were rusty in the garbage and I polish the chrome like new, I also use those found/refurbished tools to rebuild small engines and motorcycle engines I find there and I sell them back to the people that scrapped them for a hefty profit (think of the soap in fight club) Everything I buy there costs me $7.50 per 100 lbs.
@_..-.._..-.._4 ай бұрын
Hint: any device that makes heat or has high amperage use that stops working 90% of the time needs a $0.50 thermal fuse. They make many non-resettable so you’ll throw it out. Heat guns, hairdryers, vacuums etc.
@_..-.._..-.._4 ай бұрын
move to India
@Jack_all3 ай бұрын
Beautiful comment! I agree with you but more so on the company's design side. They design to throw away. Apple being the biggest criminal. We need more people like you and the uploader! Engineers need to be more responsible.
@brankelly19213 ай бұрын
Lol I highly doubt the people who threw away equipment are paying a hefty amount to buy it back from you. Those people already bought a new one
@jnhook80862 ай бұрын
@@brankelly1921That's not an engineering problem. That's a shitty component that production decided was cheaper or "good enough"
@justincase4812Ай бұрын
а с какой минуты начался ремонт? и когда закончился? я что-то пропустил!)
@lion17465 ай бұрын
единственное что заметил, это замену прокладки на крышке клапанной доски.
@user-ty5qy3iu6nАй бұрын
А додуматься никак?вот вы и мастера такие,все им покажи,не бросайте работы!Люблю переделки по двойной цене😂
@user-tf6kz9sd3hАй бұрын
@@user-ty5qy3iu6n А покраска?
@boriskruglov67858 күн бұрын
What was repaired there? Anyway, I love paited electric terminals ❤
@poldoford5 ай бұрын
Lol. Well seen
@Kogacarlo5 ай бұрын
He just changed the gasket of the pump section at 3:00
@raufjaleel83172 ай бұрын
@@raufjaleel8317 that and another charge freon a metal valve stem added to inline?
@scott49812 ай бұрын
he just opened it up and cleaned it out, it was clogged.
@HereOnYouTubeCommenting27 күн бұрын
That Torx Screwdriver!
@letauch3 ай бұрын
I hope the guy welding the compressor back together isn't the same guy who built that torx
@mrbyamile69737 күн бұрын
Class bit of welding on that screwdriver
@kevinburrows7352 күн бұрын
great work… we Pakistanis love cleaning things with Gasoline/Petrol 😄.
@AlQuran-Hidayah7 ай бұрын
Thanks for liking.
@Talentfy7 ай бұрын
We too in South Africa
@AmsFox-just4fun_SA6 ай бұрын
The ultimate cleaning agent. Even cleans oil out of concrete.
@davidbwn5 ай бұрын
i thought it was Mountain Dew?@@davidbwn
@bristleconepinus23782 ай бұрын
I hope there is an RCD on the test rig. The hardest part of that job is welding the seam without leaks. That weld looked perfect to me. I would have thought MIG would be easier. Minutes to watch but a lot longer to do. What was wrong with it to begin with? Adding the Danfoss label was going above and beyond.
@foxythedirtydog44946 ай бұрын
I would assume it was mechanical failure. I'm not sure if they rewind the coils within if it happens to be an electrical failure. Could've been something simple like a gasket leak. Didn't see them change any parts.
@derrickenbuenosaires3 ай бұрын
@@derrickenbuenosairesall he did was partly clean it and replace a couple of gaskets. I doubt there was much wrong with it to begin. Maybe just had a faulty start relay or removed from a scrap fridge. Painting the terminals is going to be a nuisance. Probably won't last any longer than just changing the oil would have done. No point doing this in a first world country as the Labour costs would mean it is no cheaper than a new one. I fit larger recon compressors regularly but pointless for something that small.
@foxythedirtydog44943 ай бұрын
Get over it
@benv97113 ай бұрын
Broken connecting rod
@rfjames52593 ай бұрын
missing rod can be seen at @0:36 @@rfjames5259
@thedavesofourlives13 ай бұрын
Falta limpiar y calibrar valvulas de baja y alta. Revisar compresion,arranque,retencion de presion o compresion. Perdidas o fugas en los empaques. Revisar fuga en el sellado. Falta mucho para decir que es una reparacion.
@refri-fast8997 ай бұрын
👍
@mariberbagiinformasiagusin44676 ай бұрын
Realmente hablando, la unica cosa bien hecha fue la soldadura.
@yuriperes835 ай бұрын
Glad that they recycle/refurbished the compressor than throw it away, it didnt show the fault of the unit.... Nice welding though...
@Onehomesports-qc6vu2 ай бұрын
now it will turnover another astounding 43 billion 👀times as this is a new lifetime😳
@scott49812 ай бұрын
Сварщик вообще жёсткий, как будто робот заварил.
@user-kz5iy2ez1l6 ай бұрын
Не понял как масло внутрь заливали? И что чинили?
@acbdcd18976 ай бұрын
Я вот тоже не понял насчёт починки. Вроде все зеркальные детали насоса компрессора остались в том же виде, что и были изначально.
@user-kz5iy2ez1l6 ай бұрын
@@acbdcd1897 прокладку сменили, помыли от мусора и соответственно звук работы стал тише - вот и всё
@hepto1005 ай бұрын
@@acbdcd1897масло внутрь заливается при помощи вакуумного насоса, чинили прокладку клапанной доски
@user-ty5qy3iu6nАй бұрын
Заменили подшипник,не благодари !Рф в перде!
@user-tf6kz9sd3hАй бұрын
Merci !! du partage beau travail !!
@fabientuizat11295 ай бұрын
Toll.... Wahre Nachhaltigkeitswunder !
@antoncerny26572 ай бұрын
I believe the problem was a worn armature bearing causing the armature to hang or rub as evidenced by the material he's showing in the bottom of the pan before cleaning. i dont think he showed replacement of those bearings - either that or the compressor gasget that he scrapes off near the end was leaking
@hughezzell100006 ай бұрын
There was what appeared to be oil laying in the bottom of the of the container? I think it was a bad gasket? judging by him using cleaning fluid on all of the components?
@@danielpurcell7395 There's supposed to be quite a lot of oil inside that container. That piece that he took out and was working on for the majority of the video is the piston and motor unit, and that whole thing sits in a puddle of oil inside the housing. The lower bearing is also an oil pump and it picks up oil and splashes it all over the compressor piston and crankshaft. The refrigerant gas itself inside the compressor also dissolves and carries the oil throughout the compressor so that the piston's chamber and the reed valves are coated in oil at all times too. To actually complete this "repair/refurbishment" process, the compressor housing should have been refilled with a lot of oil, then the compressor housing should have been vacuumed down and filled with dry nitrogen gas, and then those little copper stub tubes should have been crimped or brazed shut so that the nitrogen stays inside keeping dust and moisture out of the unit to prevent rust.
@mannys91303 ай бұрын
@@mannys9130thank you for the information. I’ve repaired many things in my life, but never a compressor out of a refrigerator. God Bless.
@danielpurcell73953 ай бұрын
Didn't look like he fixed anything, just cleaning?
@lon95403 ай бұрын
They spray it and put some stickers on it.
@danial841224 күн бұрын
Блин! Если бы у менч была такая отвертка , переделаная на звезду 😮. Я бы тоде так смог🎉😂. А головку тоже всегда точильным камнем плоскость правлю. Напильником еще хорошо получается. Ведь чем больше рисок на плоскости - тем лучше трение. 😅
@dmitryderek40966 ай бұрын
Серьезная вещь.
@a.r18325 ай бұрын
А контакты тоже красишь?) Я вот возьму на заметку.
@Mr.T-HUX5 ай бұрын
производители компрессоров суициднулись разом
@santey240578Ай бұрын
@@Mr.T-HUXконтакты надо серебрянкой красить😂
@dmitrystrelov6183Күн бұрын
В чем была поломка? Прокладку выдуло? Там в начале вообще похоже поршень отсутствовал. Тема не раскрыта….😂
@SergGirich Жыл бұрын
Скорее всего, компрессор сам был в порядке внутри, а вот корпус маленько подгнил. Очень похоже, что холодильник изначально "утёк", и его выкинули. Потом кто-то принёс от него компрессор, чтобы его проверили и привели в порядок. Upd: Возможно, сам компрессор и стал причиной утечки или недостаточного напора, поскольку мастер перебрал поршневую часть. Я так это понимаю. Если неправ, готов к поправкам.
@user-cm1ls6sh4m Жыл бұрын
@@user-cm1ls6sh4m Олег , судя по комменту вы пробовали чинить компрессора ? Я от познания всего тоже решился . Столкнулся с проблемой найти кто изготавливает прокладки , хотя индийцы их ножницами вырезают и мне придется , уж больно неадекватный ценник , 12500 р за 50 шт . Вопрос еще , может у кого получилось сделать станок для срезания головки и держатель для свакрки компрессора ? . Мне думается что ситуация в скором времени в россии будет такая что и ремонтировать компрессора начнут массово , если поставки во время 3й мировой с китая сократятся . А современные компрессора полное говно , и любая работа в конторах будет дороже чем сам новый компрессор . И еще : не найду информацию какой жидкостью промывают они внутренности мотора ? Бензином нельзя , они часто проверяют под током с искрами , значит не бензин и не керосин , что ?
@user-iy7fy2yu4s9 ай бұрын
похоже мыли соляркой) вопрос , сколько там воды останется после такого мытья?)@@user-iy7fy2yu4s
@user-tk4zm6rv4d7 ай бұрын
@@user-iy7fy2yu4sлогичнее это делать тем же маслом,которое заправляется в компрессор(хотя,не факт,что они его заправили им))
@user-xp5rq7uw1j6 ай бұрын
@@user-xp5rq7uw1j масло дорогое . я смывал все же бензином и высушивал. кто делает прокладки нашел . по 50р шт . пока плотно не подошел к ремонту но выяснил что причина поломки старых не масло и не не обмотка а стирание поршнем гильзы , да так что как пестик в колоколе болтает . в этом случае собирать из двух один где голова рабочая .
@user-iy7fy2yu4s6 ай бұрын
А потом на Авито продают: абсолютно новый мотор, не битый, не крашеный
@SarCleric6 ай бұрын
Гониво . Разбирающийся увидит второй шов , да и патрубки прям заводские 😂
@dmitrystrelov6183Күн бұрын
This shows why some foreign "remanufactured" repair parts don't last very long. Made to run again but not truly repaired.
@lewismingledorff64178 күн бұрын
These kind of guys will inherit the Earth.
@donhaywood65426 ай бұрын
Súper 💯💯
@JuancarlosRamirezM-lv1io7 ай бұрын
Pessoas assim,faz falta aqui no Brasil!
@edisonmoreira35922 ай бұрын
*Разобрал. Помыл. Отремонтировано? Крестовая отвертка нано технология просто!*
@KvadratniyTreugolnik Жыл бұрын
Это был Торкс.
@Ramulus20096 ай бұрын
Собрал и покрасил. 😅. Без наклейки не взлетит. Проверил главное рабочую обмотку. А если пусковой кирдык - придется опять разваривать. Но судя по видео - это не проблема. 😅
@dmitryderek40966 ай бұрын
Spray painting the electrical contacts is less than ideal.
@noahbthesavagegardener51463 ай бұрын
Great job, pretty sure he swapped out the valve plate there, didn't get caught by the camera. Here's hoping those guys are recovering all those nasty cfc's when they're scrapping those fridges 🤞🏼
@SuperBicycleRepairMan4 ай бұрын
Aren't most fridges using butane for decades now?
@PR-cj8pd4 ай бұрын
@@PR-cj8pdno
@_..-.._..-.._4 ай бұрын
Ehh, I think some use propane but a lot more use R134a to reduce running costs. HFC's are bad greenhouse gas though.
@SuperBicycleRepairMan4 ай бұрын
BUENÍSIMO GRACIAS
@fernandorodriguezmaya39975 ай бұрын
Писец, вот так купишь новый холодильник с таким компрессором....
@HUIVAM Жыл бұрын
Я выбросил Стинол с двумя такими Данфосами! Ремонт обошелся бы дороже...экономика. Новый Бош с одним компрессором из Китая холодит не хуже :)
@user-mm7ll4qp7k7 ай бұрын
@@user-mm7ll4qp7k Стинол с двумя Данфосами из Германии пашет уже 20 лет. Пластик местами пожелтел, менял выключатель света, чистил дренажную трубку - вот и все проблемы.
@alexdiver98093 ай бұрын
@@user-mm7ll4qp7k пока клеевые локринги не разойдутся и не утечет хладагент...
@user-gb6kz6qd3u5 күн бұрын
Wouldn’t the weld contaminate the inside? I didn’t see any nitrogen used.
@donaldappelhof20596 ай бұрын
The nitrogen was 78.08% regular atmospheric content 😂. Just 21.92% contamination
@billybowbob20714 ай бұрын
Keren, sukses mas bro, salam kenal dari pekalongan
@mbahcarrier16296 ай бұрын
Good work , pls what is the material of valve plate gasket
@math14122 ай бұрын
❤Congratulations for your recycling work. hello from France ❤
@anto1.9.8.05 ай бұрын
Beautiful job! Such skill and pride 🎉
@EatcrowАй бұрын
Wow, thank you!
@TalentfyАй бұрын
Most ppl in developed countries are "green" and feel as saving the world on their Teslas, but this guy is saving more carbon emissions fixing a fridge that you will in years.
@joaodfreire9 күн бұрын
no
@user-re7cq3wy6r8 күн бұрын
Good job
@claudiopujol13527 ай бұрын
Thank you for your video 🙏🙏🙏
@bazghani4 ай бұрын
My pleasure.
@Talentfy4 ай бұрын
So what was fixed???
@lewiskelly147 күн бұрын
Прокладку клапанной доски .
@dmitrystrelov6183Күн бұрын
Very impressive!
@edlauren94345 күн бұрын
And everyone has the tools of a metals shop!
@goedelite5 ай бұрын
Nice welding but he should have changed the bearings.
@ambrosepaine18985 ай бұрын
Ésta muy bien la repotenciacion del compresor, lo malo es que otros la venden como nuevas
@neriovargas47425 ай бұрын
No! They sell these as a repaired compressors.
@raufjaleel83172 ай бұрын
Are they reselling these repaired compressors as new? What's with the fresh paint job and new labeling? I have no idea how long these rebuilts last, but the appearance fails the sniff test.
@krissanderson50044 күн бұрын
Parabens!
@mordecai8064 ай бұрын
What class bit of welding?
@kevinburrows7352 күн бұрын
بسم الله ماشاء الله هذا إلي أريد الرزق من ربه
@user-bn2bp2nw3l2 ай бұрын
Easy Pezy if you have a cutter and a welding jig never mind these units are originally assembled in white rooms I’m sure it will be fine that compressor wholesale is less than 100$
@AMERICANPRIDE11002 ай бұрын
How much oil and what type do they refill with? When?
@adnacraigo65907 күн бұрын
Very good! 👏👏👏👏
@eugeniosouza663310 күн бұрын
To mi się podoba, naprawiać a nie wyrzucać .
@sylwester57676 ай бұрын
Ciekawe ile to pociągnie. Nawet łożysk nie wymienił.
@d..c..5 ай бұрын
@@d..c.. Tyle pociągnie żeby potem znowu naprawiać, ale na pewno koszt naprawy jest mniejszy niż zakup nowej sprężarki.
@sylwester57675 ай бұрын
@@sylwester5767 Ale kto ma czas i ochotę co 2 lata sprężarkę naprawiać?
@d..c..5 ай бұрын
@@d..c.. No u nas to na pewno nikt ale w tamtych krajach widać mają😄
@sylwester57675 ай бұрын
@@sylwester5767 Chodzi mi o klientów tych usług...
@d..c..5 ай бұрын
Awesome
@jaimegonzalez69266 ай бұрын
After repairing I was told to connect the 3 wires from 3 phase 380v to the 3 terminals of the compressor
@tbone63542 ай бұрын
1:45 is he spraying the coil with oil to wash it? so curious. I work in hvac but only replace compressors.
@retroguardian48027 ай бұрын
nah that's diesel
@meditation91127 ай бұрын
@retroguardian4802 probably carbon techachorlide ......the stuff we banned many years ago
@FC-qe1wl5 ай бұрын
I think Petrol@@meditation9112
@leesmith15585 ай бұрын
Excellent travail les gars !
@didiercoret5616 ай бұрын
Someone buy the man a torx driver
@geoffgeoff1433 ай бұрын
The same outfit that supplied Boeing with their door bolts
@62Cristoforo3 ай бұрын
😂😂😂
@phyrros111 күн бұрын
The torx screwdriver killed me
@rufiorufioo9 күн бұрын
Top.10.
@elisoaressoares46673 ай бұрын
Yeah, but the bearings weren't even changed.
@rogerfroud3005 ай бұрын
Con que producto lo limpian?
@cristianvazquez895Ай бұрын
In America it would be stripped for copper. These people are productive and saving them from destruction and trash land fills. I just wish they would have explained it in the video of what they do and use so I could do it if mine ever breaks down.
@DreidMusicalX5 ай бұрын
It’s just not cost effective. Costs more to repair then make a new one.
@jamskinner5 ай бұрын
What oil do you use for cleaning?
@RecepUnal-iz3ed7 ай бұрын
it’s gasoline/petrol.
@AlQuran-Hidayah7 ай бұрын
You can use diesel too!!
@andrelimadasilvasilva57096 ай бұрын
what would be the restored part??
@a.g.3847Ай бұрын
I am from indonesia❤
@ceceabdurahman90405 ай бұрын
did Zero to fix compressor - shinny black paint fixes all
Please where gloves, the chemicals are bad for you.🙂🙂🙂🙂
@txdoubletap85097 ай бұрын
I saw a compressor disassembled, then reassembled. I did not see any diagnosis, troubleshooting or even testing of the reassembled unit. Was it repaired? Who knows....
@johnnyappleseed64155 ай бұрын
New gasket... 😉
@alexdiver98093 ай бұрын
и продали как новый. 😁😁😁
@milyantsev6 ай бұрын
Nice welding…
@colinsteam6 ай бұрын
yeah i thought so too that guy is a good welder a nice clean bead
@sonnyc38265 ай бұрын
These guys are crafty
@MC_Alaba10 күн бұрын
Good
@Autopart277 Жыл бұрын
Bahut rough work, but Pakistani are good mender.
@smondal14639 ай бұрын
И в новый холодильник его потом :)
@LoneWolfRU5 ай бұрын
What was fixed?
@dar37265 ай бұрын
What repairs?
@ThinhNguyen-sj9jkАй бұрын
There's a big missing time chunk in cleaning at 1:07
@wickedprotos19376 ай бұрын
Like the welding jig😅😅
@martindennehy30306 күн бұрын
Bro wearing a paper mask, but no glasses when he's grinding is wild.
@milonkill19 күн бұрын
Kırık tornavida,imkansızlıklar ve başarı... Hepsi evde ki çocuklara bir tane ekmek götürebilmek için... Tebrik ederim
@okangedik7262 Жыл бұрын
Ничего не сломанная. Подваренная бита, удлиненный шток отвертки. Этот просто удобнее для работы. А так половиной бит и не подлезть к отверстиюб
@Barmaley80x6 ай бұрын
Very good
@goolamhoosen601113 күн бұрын
My question is. For how long will that compressor last?
@ottogabriel4366Ай бұрын
Лет 30. Потом ещё раз отремонтируют, и ещё 30.
@user-dv9cb7tm8o6 күн бұрын
Тоже не понял, в чем поломка(
@pens8726 Жыл бұрын
Mountain Dew does the trick every time.
@kevin5073Ай бұрын
Czyli kupując kompresor Danfos nie mam pewności czy jest po regeneracji czy nowy ? :)
@TomaszKorzeniowskiKalisz17 күн бұрын
It is not clear what was the problem with the engine, it opened and closed and that's it
@keyanebra94496 күн бұрын
Yo no he visto que halla arreglado nada lo que hizo fue desarmar y limpiar y nisiquiera ha verificado presion y amperaje como sabe que aun no sigue malo . Esto no es una reparacion
@enidavid66377 ай бұрын
Which chemicals do you use for cleaning
@nditumenichagunda41924 ай бұрын
It's a closely guarded secret😉
@raufjaleel83172 ай бұрын
Was that an certified Danfoss workshop ? hmmm i don't think so
@johanharlin44913 күн бұрын
I wonder what brand of pop is he using to clean it and how does that fix the compressor?
LOL, that torx screwdriver. Pretty neat tho.
torque turn
I never saw the inside of a compressor.what a lucky I saw this vid!
I don’t want to hate on the guy, but I didn’t see the guy fill the pan with oil, resurface the armature, or replace the brushes, and like someone said, the bearing. This isn’t going to last very long. But I like I finally see what is inside one of these.
Well, he did a nice paint job & added some misleading labels.
Replace the brushes? There aren't any. Rotor was probably good even though it had scuff marks on it. It looked like he had the stator rewound. Bearing, being in oil, he might have changed it or he might not have. But it comes down to cost. Just breathe in the paint fumes! Over the years, I've seen some amazing repairs in these out of the way places, whereas on home turf, we'd just bin it.
Rotor, not armature
@@bertiesworld so all it needed was a pair of gaskets.
Armature and brushes are very hard to find on a hermetic compressor 😂.
I have so much respect for these people who actually fix things instead of just being parts changers. And with conditions and equipment that would make people in this part of the world cry like babies. There's never a shortage of comments from the safety na2i's under videos like these.
Agreed I’ve been in the hvac industry for 30years and never have I seen a compressor repaired, it’s scrap metal. I will say the labor involved to do this would probably out weigh the price of a new compressor especially with having to weld it back up and if the union is involved. That was some good efficient workmanship we just watched.
It's not like people wouldn't be willing to do this in America lol.. it has everything to do with cost of labor
@@jnhook8086 And with a new compressor you get a manufacturers warranty. Even the 11kw motors we use (much bigger than shown here) are no longer repaired. The cost of taking it apart, fixing the fault just doesn't make it cost effective - a faulty bearing we might change but again if the rotor has been hitting the stator - not good. Far cheaper to just get new.
I’m sick of living in a country of people that throw out $3,000 refrigerators when the little round black $2 capacitor goes bad. But I found a niche. I visit my local scrapyard once a week to look for old tools, appliances etc and I fix them to like new quality for literal pennies in parts and a bit of elbow grease. I have great satisfaction in using old snap-on wrenches and power tools that were rusty in the garbage and I polish the chrome like new, I also use those found/refurbished tools to rebuild small engines and motorcycle engines I find there and I sell them back to the people that scrapped them for a hefty profit (think of the soap in fight club) Everything I buy there costs me $7.50 per 100 lbs.
Hint: any device that makes heat or has high amperage use that stops working 90% of the time needs a $0.50 thermal fuse. They make many non-resettable so you’ll throw it out. Heat guns, hairdryers, vacuums etc.
move to India
Beautiful comment! I agree with you but more so on the company's design side. They design to throw away. Apple being the biggest criminal. We need more people like you and the uploader! Engineers need to be more responsible.
Lol I highly doubt the people who threw away equipment are paying a hefty amount to buy it back from you. Those people already bought a new one
@@brankelly1921That's not an engineering problem. That's a shitty component that production decided was cheaper or "good enough"
а с какой минуты начался ремонт? и когда закончился? я что-то пропустил!)
единственное что заметил, это замену прокладки на крышке клапанной доски.
А додуматься никак?вот вы и мастера такие,все им покажи,не бросайте работы!Люблю переделки по двойной цене😂
@@user-ty5qy3iu6n А покраска?
What was repaired there? Anyway, I love paited electric terminals ❤
Lol. Well seen
He just changed the gasket of the pump section at 3:00
@@raufjaleel8317 that and another charge freon a metal valve stem added to inline?
he just opened it up and cleaned it out, it was clogged.
That Torx Screwdriver!
I hope the guy welding the compressor back together isn't the same guy who built that torx
Class bit of welding on that screwdriver
great work… we Pakistanis love cleaning things with Gasoline/Petrol 😄.
Thanks for liking.
We too in South Africa
The ultimate cleaning agent. Even cleans oil out of concrete.
i thought it was Mountain Dew?@@davidbwn
I hope there is an RCD on the test rig. The hardest part of that job is welding the seam without leaks. That weld looked perfect to me. I would have thought MIG would be easier. Minutes to watch but a lot longer to do. What was wrong with it to begin with? Adding the Danfoss label was going above and beyond.
I would assume it was mechanical failure. I'm not sure if they rewind the coils within if it happens to be an electrical failure. Could've been something simple like a gasket leak. Didn't see them change any parts.
@@derrickenbuenosairesall he did was partly clean it and replace a couple of gaskets. I doubt there was much wrong with it to begin. Maybe just had a faulty start relay or removed from a scrap fridge. Painting the terminals is going to be a nuisance. Probably won't last any longer than just changing the oil would have done. No point doing this in a first world country as the Labour costs would mean it is no cheaper than a new one. I fit larger recon compressors regularly but pointless for something that small.
Get over it
Broken connecting rod
missing rod can be seen at @0:36 @@rfjames5259
Falta limpiar y calibrar valvulas de baja y alta. Revisar compresion,arranque,retencion de presion o compresion. Perdidas o fugas en los empaques. Revisar fuga en el sellado. Falta mucho para decir que es una reparacion.
👍
Realmente hablando, la unica cosa bien hecha fue la soldadura.
Glad that they recycle/refurbished the compressor than throw it away, it didnt show the fault of the unit.... Nice welding though...
now it will turnover another astounding 43 billion 👀times as this is a new lifetime😳
Сварщик вообще жёсткий, как будто робот заварил.
Не понял как масло внутрь заливали? И что чинили?
Я вот тоже не понял насчёт починки. Вроде все зеркальные детали насоса компрессора остались в том же виде, что и были изначально.
@@acbdcd1897 прокладку сменили, помыли от мусора и соответственно звук работы стал тише - вот и всё
@@acbdcd1897масло внутрь заливается при помощи вакуумного насоса, чинили прокладку клапанной доски
Заменили подшипник,не благодари !Рф в перде!
Merci !! du partage beau travail !!
Toll.... Wahre Nachhaltigkeitswunder !
I believe the problem was a worn armature bearing causing the armature to hang or rub as evidenced by the material he's showing in the bottom of the pan before cleaning. i dont think he showed replacement of those bearings - either that or the compressor gasget that he scrapes off near the end was leaking
There was what appeared to be oil laying in the bottom of the of the container? I think it was a bad gasket? judging by him using cleaning fluid on all of the components?
@@danielpurcell7395you think????? Maybe?????? Questions???? Comments???? Answers?????? Question marks????
@@danielpurcell7395 There's supposed to be quite a lot of oil inside that container. That piece that he took out and was working on for the majority of the video is the piston and motor unit, and that whole thing sits in a puddle of oil inside the housing. The lower bearing is also an oil pump and it picks up oil and splashes it all over the compressor piston and crankshaft. The refrigerant gas itself inside the compressor also dissolves and carries the oil throughout the compressor so that the piston's chamber and the reed valves are coated in oil at all times too. To actually complete this "repair/refurbishment" process, the compressor housing should have been refilled with a lot of oil, then the compressor housing should have been vacuumed down and filled with dry nitrogen gas, and then those little copper stub tubes should have been crimped or brazed shut so that the nitrogen stays inside keeping dust and moisture out of the unit to prevent rust.
@@mannys9130thank you for the information. I’ve repaired many things in my life, but never a compressor out of a refrigerator. God Bless.
Didn't look like he fixed anything, just cleaning?
They spray it and put some stickers on it.
Блин! Если бы у менч была такая отвертка , переделаная на звезду 😮. Я бы тоде так смог🎉😂. А головку тоже всегда точильным камнем плоскость правлю. Напильником еще хорошо получается. Ведь чем больше рисок на плоскости - тем лучше трение. 😅
Серьезная вещь.
А контакты тоже красишь?) Я вот возьму на заметку.
производители компрессоров суициднулись разом
@@Mr.T-HUXконтакты надо серебрянкой красить😂
В чем была поломка? Прокладку выдуло? Там в начале вообще похоже поршень отсутствовал. Тема не раскрыта….😂
Скорее всего, компрессор сам был в порядке внутри, а вот корпус маленько подгнил. Очень похоже, что холодильник изначально "утёк", и его выкинули. Потом кто-то принёс от него компрессор, чтобы его проверили и привели в порядок. Upd: Возможно, сам компрессор и стал причиной утечки или недостаточного напора, поскольку мастер перебрал поршневую часть. Я так это понимаю. Если неправ, готов к поправкам.
@@user-cm1ls6sh4m Олег , судя по комменту вы пробовали чинить компрессора ? Я от познания всего тоже решился . Столкнулся с проблемой найти кто изготавливает прокладки , хотя индийцы их ножницами вырезают и мне придется , уж больно неадекватный ценник , 12500 р за 50 шт . Вопрос еще , может у кого получилось сделать станок для срезания головки и держатель для свакрки компрессора ? . Мне думается что ситуация в скором времени в россии будет такая что и ремонтировать компрессора начнут массово , если поставки во время 3й мировой с китая сократятся . А современные компрессора полное говно , и любая работа в конторах будет дороже чем сам новый компрессор . И еще : не найду информацию какой жидкостью промывают они внутренности мотора ? Бензином нельзя , они часто проверяют под током с искрами , значит не бензин и не керосин , что ?
похоже мыли соляркой) вопрос , сколько там воды останется после такого мытья?)@@user-iy7fy2yu4s
@@user-iy7fy2yu4sлогичнее это делать тем же маслом,которое заправляется в компрессор(хотя,не факт,что они его заправили им))
@@user-xp5rq7uw1j масло дорогое . я смывал все же бензином и высушивал. кто делает прокладки нашел . по 50р шт . пока плотно не подошел к ремонту но выяснил что причина поломки старых не масло и не не обмотка а стирание поршнем гильзы , да так что как пестик в колоколе болтает . в этом случае собирать из двух один где голова рабочая .
А потом на Авито продают: абсолютно новый мотор, не битый, не крашеный
Гониво . Разбирающийся увидит второй шов , да и патрубки прям заводские 😂
This shows why some foreign "remanufactured" repair parts don't last very long. Made to run again but not truly repaired.
These kind of guys will inherit the Earth.
Súper 💯💯
Pessoas assim,faz falta aqui no Brasil!
*Разобрал. Помыл. Отремонтировано? Крестовая отвертка нано технология просто!*
Это был Торкс.
Собрал и покрасил. 😅. Без наклейки не взлетит. Проверил главное рабочую обмотку. А если пусковой кирдык - придется опять разваривать. Но судя по видео - это не проблема. 😅
Spray painting the electrical contacts is less than ideal.
Great job, pretty sure he swapped out the valve plate there, didn't get caught by the camera. Here's hoping those guys are recovering all those nasty cfc's when they're scrapping those fridges 🤞🏼
Aren't most fridges using butane for decades now?
@@PR-cj8pdno
Ehh, I think some use propane but a lot more use R134a to reduce running costs. HFC's are bad greenhouse gas though.
BUENÍSIMO GRACIAS
Писец, вот так купишь новый холодильник с таким компрессором....
Я выбросил Стинол с двумя такими Данфосами! Ремонт обошелся бы дороже...экономика. Новый Бош с одним компрессором из Китая холодит не хуже :)
@@user-mm7ll4qp7k Стинол с двумя Данфосами из Германии пашет уже 20 лет. Пластик местами пожелтел, менял выключатель света, чистил дренажную трубку - вот и все проблемы.
@@user-mm7ll4qp7k пока клеевые локринги не разойдутся и не утечет хладагент...
Wouldn’t the weld contaminate the inside? I didn’t see any nitrogen used.
The nitrogen was 78.08% regular atmospheric content 😂. Just 21.92% contamination
Keren, sukses mas bro, salam kenal dari pekalongan
Good work , pls what is the material of valve plate gasket
❤Congratulations for your recycling work. hello from France ❤
Beautiful job! Such skill and pride 🎉
Wow, thank you!
Most ppl in developed countries are "green" and feel as saving the world on their Teslas, but this guy is saving more carbon emissions fixing a fridge that you will in years.
no
Good job
Thank you for your video 🙏🙏🙏
My pleasure.
So what was fixed???
Прокладку клапанной доски .
Very impressive!
And everyone has the tools of a metals shop!
Nice welding but he should have changed the bearings.
Ésta muy bien la repotenciacion del compresor, lo malo es que otros la venden como nuevas
No! They sell these as a repaired compressors.
Are they reselling these repaired compressors as new? What's with the fresh paint job and new labeling? I have no idea how long these rebuilts last, but the appearance fails the sniff test.
Parabens!
What class bit of welding?
بسم الله ماشاء الله هذا إلي أريد الرزق من ربه
Easy Pezy if you have a cutter and a welding jig never mind these units are originally assembled in white rooms I’m sure it will be fine that compressor wholesale is less than 100$
How much oil and what type do they refill with? When?
Very good! 👏👏👏👏
To mi się podoba, naprawiać a nie wyrzucać .
Ciekawe ile to pociągnie. Nawet łożysk nie wymienił.
@@d..c.. Tyle pociągnie żeby potem znowu naprawiać, ale na pewno koszt naprawy jest mniejszy niż zakup nowej sprężarki.
@@sylwester5767 Ale kto ma czas i ochotę co 2 lata sprężarkę naprawiać?
@@d..c.. No u nas to na pewno nikt ale w tamtych krajach widać mają😄
@@sylwester5767 Chodzi mi o klientów tych usług...
Awesome
After repairing I was told to connect the 3 wires from 3 phase 380v to the 3 terminals of the compressor
1:45 is he spraying the coil with oil to wash it? so curious. I work in hvac but only replace compressors.
nah that's diesel
@retroguardian4802 probably carbon techachorlide ......the stuff we banned many years ago
I think Petrol@@meditation9112
Excellent travail les gars !
Someone buy the man a torx driver
The same outfit that supplied Boeing with their door bolts
😂😂😂
The torx screwdriver killed me
Top.10.
Yeah, but the bearings weren't even changed.
Con que producto lo limpian?
In America it would be stripped for copper. These people are productive and saving them from destruction and trash land fills. I just wish they would have explained it in the video of what they do and use so I could do it if mine ever breaks down.
It’s just not cost effective. Costs more to repair then make a new one.
What oil do you use for cleaning?
it’s gasoline/petrol.
You can use diesel too!!
what would be the restored part??
I am from indonesia❤
did Zero to fix compressor - shinny black paint fixes all
Сварной крутой!
ਕੰਪਰੇਸ਼ਰ ਦਾ ਸਪਰਿੰਗ ਟੁੱਟ ਗਿਆ ਹੈ ਗੋਦਰੇਜ , ਇਸ ਦਾ ਹੱਲ ਹੋ ਸਕਦਾ ਹੈ
amazing.
Glad you think so!
No light for Grandma😂😂😂😂
No va bañado en aceite?
What we need back in the USA
Он свое отработал , этот ремонт не на долго
Shop location??
👍👍👍
Please where gloves, the chemicals are bad for you.🙂🙂🙂🙂
I saw a compressor disassembled, then reassembled. I did not see any diagnosis, troubleshooting or even testing of the reassembled unit. Was it repaired? Who knows....
New gasket... 😉
и продали как новый. 😁😁😁
Nice welding…
yeah i thought so too that guy is a good welder a nice clean bead
These guys are crafty
Good
Bahut rough work, but Pakistani are good mender.
И в новый холодильник его потом :)
What was fixed?
What repairs?
There's a big missing time chunk in cleaning at 1:07
Like the welding jig😅😅
Bro wearing a paper mask, but no glasses when he's grinding is wild.
Kırık tornavida,imkansızlıklar ve başarı... Hepsi evde ki çocuklara bir tane ekmek götürebilmek için... Tebrik ederim
Ничего не сломанная. Подваренная бита, удлиненный шток отвертки. Этот просто удобнее для работы. А так половиной бит и не подлезть к отверстиюб
Very good
My question is. For how long will that compressor last?
Лет 30. Потом ещё раз отремонтируют, и ещё 30.
Тоже не понял, в чем поломка(
Mountain Dew does the trick every time.
Czyli kupując kompresor Danfos nie mam pewności czy jest po regeneracji czy nowy ? :)
It is not clear what was the problem with the engine, it opened and closed and that's it
Yo no he visto que halla arreglado nada lo que hizo fue desarmar y limpiar y nisiquiera ha verificado presion y amperaje como sabe que aun no sigue malo . Esto no es una reparacion
Which chemicals do you use for cleaning
It's a closely guarded secret😉
Was that an certified Danfoss workshop ? hmmm i don't think so
I wonder what brand of pop is he using to clean it and how does that fix the compressor?
Mountain Dew for sure
ازکجاوچهطوریمیشهاینکوپرسورهاروخریدوسفارشداد