KZhead
Ғылым және технология

DIY Sandblaster Homemade Never seen before

peChoO
2019 ж. 13 Қаз.
890 944 Рет қаралды
Жүктеу

This sandblaster is made from a fire extinguisher big bottle never seen before on youtube!!!
His bottle is ideal for sandblasting because it has a lid where sand is poured and there is a safety valve on the lid itself
► Click HERE to subscribe to peChoO kzhead.info/tools/2gV.html...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
#diy #sandblaster #homemade

Пікірлер

  • Air Compressor for this sandblaster kzhead.info/sun/mc1-pcapmaywfaM/bejne.html My Project!!!

    @peChoOO@peChoOO4 жыл бұрын

    • top

      @antoniosantostonhao1752@antoniosantostonhao17523 жыл бұрын

    • Zandstraalketel

      @fvaneeden7679@fvaneeden76793 жыл бұрын

  • I did the exact same thing a couple years ago with an old fire extinguisher just like yours. Some comments: I use an old cream separator strainer to help funnel in the sand (or crushed glass) and to filter out the chunks when reusing the media. It also keeps the sand out of the threads so the lid screws on easily. Welding on the tank is not an issue if you are a good welder using the right equipment. You need A LOT MORE AIR to make it work as it should. 5hp min with 1/2" or 3/4" line feeding it to a larger dia tip. I joined 2 of my compressors together for a combined 7hp and was happy with its cutting speed. Water was an issue, it would wet down the sand right below the sand regulating valve. Plugged up after 5 min of blasting. I changed the Tee to a "cross" so I could pull the plug out of the bottom of the cross to unplug. Now picked up a refrigerated air dryer, hope that takes care of the water, if not, I have some other ideas. Very frustrating when it plugs up but I'm happy with it, blasted a truck cab inside and out last year, 2 or 300lb of sand (kept sweeping it up and reusing) and 5 or 6 hours of labor to get it done. To be honest, I took the complete bed and front fenders up the road to a guy with a big system, $300, done the same day. So for me, maybe not worth it to do myself...

    @ganoncollins1@ganoncollins14 жыл бұрын

  • If you screen the sand with a tea strainer it will help remove the rocks, chunks, trash and other big stuff which will help stop the clogs. Also keeping the sand dry is very important .

    @tomharrell1954@tomharrell19544 жыл бұрын

  • Bloody brilliant. I have an old compressor tank that is huge and didn't know what to do with it. I do now :)

    @noobsoff-road@noobsoff-road4 жыл бұрын

  • Nice job. I have a 60 gallon air compressor tank I am making into an abrasive blast system. Just got my 7.5 hp compressor on line so should have enough CFM to feed it.

    @HiTechDiver@HiTechDiver3 жыл бұрын

  • Добрый вечер! Отличное видео! 👍👍👍 Удачи и успехов Вам!!!

    @VSE_SVOIMI_RUKAMI@VSE_SVOIMI_RUKAMI4 жыл бұрын

  • Good work!

    @technicandmechanic4125@technicandmechanic41254 жыл бұрын

  • Very cool. You might need a slightly bigger nozzle for once you get more CFM though (probably even now need one).

    @CraftwerksMC@CraftwerksMC4 жыл бұрын

  • odlican si , steta sto ne snimas cesce. Ali ok, sve razumem ... pozz i sve najbolje :)

    @grujagrujomirovic9675@grujagrujomirovic96754 жыл бұрын

  • Odlican projekt Moras sad napravit samo kabinu za pjeskarenje

    @marioogas5825@marioogas58254 жыл бұрын

  • Wooo he visto los vídeos que subes en tu canal de youtube y déjeme decirle que es todo un maestro 🖒😎👏 , Saludos desde PERÚ 🇵🇪lima, porfa si no fuera mucho pondría aunque sea subtítulos en español para poder entender más profundo el procedimiento de construcción.

    @kingronald5376@kingronald53764 жыл бұрын

  • Just watched your compressor build and now this I am trying to start a powder coating/ blasting company but mobile . Any ways new sub here you do amazing work . Thanks for the vid I look forward to seeing more

    @NewsThatMatterUsa@NewsThatMatterUsa Жыл бұрын

  • Boli glava 👏🏻💪🏻👍🏻 kad stolice i astal da donesem 🙄🤭

    @stefanbojovic6411@stefanbojovic64114 жыл бұрын

  • Good job!

    @nikolanikolic9326@nikolanikolic93264 жыл бұрын

  • Svaka cast.

    @luka0090@luka00904 жыл бұрын

  • Very good job well done you need bigger compressor 👍

    @emelierose1472@emelierose14724 жыл бұрын

  • Q mas amigo me gustaria saber sinfunciona bien para remover pintura automotruz ya q voy a hacer uno para ese fin gracias

    @javieruzcategui1421@javieruzcategui14214 жыл бұрын

  • Salut, te felicit ptr videoclipuri si cu aceasta ocazue te deranjez si eu cu doua intrebari . Este suficient compresorul pe care l ai folosit pentru a sabla si daca ai folosit nisip special pentru sablat?

    @cosmindum2627@cosmindum26273 жыл бұрын

  • Подскажите пожалуйста а шланг к пескоструйке от компрессора какой диаметр нужен как рукав?

    @user-cg2kz3pm7k@user-cg2kz3pm7k4 жыл бұрын

  • Super job.... Ciao from Italia

    @luigibelle2809@luigibelle28094 жыл бұрын

    • grazie :)

      @peChoOO@peChoOO4 жыл бұрын

  • awesome job

    @alexpsyt@alexpsyt4 жыл бұрын

  • show!!!! bravooo!!

    @SaldanhaBR-bl9kx@SaldanhaBR-bl9kx4 жыл бұрын

  • Svaka čast za ceo projekat oko peskare i kompresora imam jedno pitanje dali bi mogao da napraviš neke skice i šeme pravljenja i povezivanja i da staviš gde si delove nabavljao značilo bi nama koji razmišljamo da pravimo ovako nešto.. Pozdrav i sve najbolje u daljem radu i puno uspeha ti želim! 😃

    @nikolamarkovic9402@nikolamarkovic94024 жыл бұрын

  • Bravo Peko svaka cast

    @MrDachaK@MrDachaK4 жыл бұрын

  • Bonsoir,j ai une petite question,le tuyau bleu ,tu le relie du compresseur au detendeur c est ca ?

    @germaintrullard6139@germaintrullard61394 жыл бұрын

  • Buen trabajo. De donde sácate la boquilla de la pistola?

    @rustysanchezgarage@rustysanchezgarage4 жыл бұрын

  • Maravilloso trabajo! 👍🇲🇽

    @el5inco129@el5inco1292 жыл бұрын

  • Svaka cast brt

    @ivanxd796@ivanxd7964 жыл бұрын

  • Many take welding on pressure vessels for granted. It is wise to use a USB borescope to perform a visual inspection inside any tank you intend to use and not take safety for granted. When grinding do not create stress raisers on the pressure vessel. Consider using a vessel far too strong to fail at normal blasting pressures. For example instead a a sheet metal fire extinguisher, a welding shielding gas cylinder (no explosion risk during cutting) is spec'ed for thousands of psi/kilopascals and being thick much easier to weld safely.

    @Comm0ut@Comm0ut7 ай бұрын

  • Ja tek provalio kada sam video srps na crevu... :D bravo!!!

    @UrosRodic@UrosRodic3 жыл бұрын

  • Bravo ma super , svaka čast skidam kapu i duboki naklon time odajem poštovanje , jeftino i jako funcionalno super stroj

    @danijelbalic4882@danijelbalic48824 жыл бұрын

  • Awesome job, thumbs up

    @EZRestoreTV@EZRestoreTV3 жыл бұрын

  • I’ve watched several sandblasting DIY, but this is absolutely great. Safe, handy and also doesn’t coast fortune I guess. I wish you could share in the comment what size of valves, hose and converters and etc you’ve used for this project. Thanks

    @enkiperspolis@enkiperspolis3 жыл бұрын

  • Bonjour, J'ai craqué complétement !!!! Tout simplement magnifique. Félicitation pour votre réalisation et Merci pour votre vidéo. Peux t'on avoir la liste de l'ensemble des pièces et fournitures afin de faire le même. Un grand Merci à vous encore. Salutations. Stéphane

    @stephanechaucesse6928@stephanechaucesse69282 жыл бұрын

  • woooooooooooooooooooooooooooooow nice man!!!!

    @mladenpavlovic5542@mladenpavlovic55424 жыл бұрын

  • T felicito quedo muy bueno bro

    @jhonhinoffer1204@jhonhinoffer12044 жыл бұрын

    • gracias :D

      @peChoOO@peChoOO4 жыл бұрын

  • Maestro peccho como se llama el tema musical del intro de este vídeo??

    @kingronald5376@kingronald53764 жыл бұрын

  • donde puedo ver que materiales especificos utilizaste?

    @asueramaris5951@asueramaris59513 жыл бұрын

  • awesome!!!

    @milanmladenovic839@milanmladenovic8394 жыл бұрын

  • to je to brate izum vredan milion! bravo 💪💪💪

    @MotoTubeSRB@MotoTubeSRB4 жыл бұрын

    • Hvala

      @peChoOO@peChoOO4 жыл бұрын

  • Que comprensora usas , la capacidad de cuántos litros es ?

    @mecanicadetransmisioncajas2555@mecanicadetransmisioncajas25552 жыл бұрын

  • Koji aparat za zavarivanje koristis

    @je8278@je82784 жыл бұрын

  • good video mate! Pro tip!! turn down your wire speed:) you will enjoy welding more if you do:) keep up..

    @jippikakkebro@jippikakkebro4 ай бұрын

  • Lol, 2 hours later 😁 Should have also add the tank sandblasting: 2 years later

    @jw200@jw2004 жыл бұрын

  • a que lb de presion trabaja en sandblasting?

    @nicolascely890@nicolascely8903 жыл бұрын

  • amigo yo tengo un tanque de gas automotriz servirá para el mismo proposito ?

    @TheBiggermc@TheBiggermc3 жыл бұрын

  • Da li ide obican suvi pesak ili neki specinalni?

    @aleksandarorelj4158@aleksandarorelj41583 жыл бұрын

  • What kind of tank did you start out with. For the threaded cap on top

    @cjfranklin9130@cjfranklin91304 жыл бұрын

    • this bottle is a fire extinguisher :)

      @peChoOO@peChoOO4 жыл бұрын

  • que tipo de comprensora necesito para usar un arenadora?

    @nicolasalfredoraymondiayal8059@nicolasalfredoraymondiayal80593 жыл бұрын

  • Jajajaja muy bueno según el con su EPP y la guarda del esmeril?

    @jesusgrimaldomartinez2065@jesusgrimaldomartinez20653 жыл бұрын

  • Fantastic job, congratulations. A friend question: What kind of sand do you use? Thanks

    @AMJnaturfoto@AMJnaturfoto3 жыл бұрын

    • Garnet

      @TG-zd9de@TG-zd9de2 жыл бұрын

  • Ajde jos kad cekam da vidim to cudilo 🤪

    @stefanbojovic6411@stefanbojovic64114 жыл бұрын

  • Sir what name of that poweder

    @vedantambekar7075@vedantambekar70754 жыл бұрын

  • bonjour pechoO quel marque de disque utilise tu stp

    @philgallier2690@philgallier26904 жыл бұрын

  • Pozdrav,odličan video. Od čega je ta boca,kako se zove?

    @nebojsabugarin4120@nebojsabugarin4120 Жыл бұрын

  • Which sand blasting media are you using and what’s pressure for sandblasting

    @maragarcias987@maragarcias9874 жыл бұрын

    • Sonia Memon Sand Circa 100 pounds per square inch

      @tomharrell1954@tomharrell19544 жыл бұрын

  • What type of cut off wheels are these please?

    @eastsliders_drift_trikes_nz@eastsliders_drift_trikes_nz3 жыл бұрын

  • Che potenza hanno il compressore e questa sabbiatrice?

    @petrusbenckey@petrusbenckey3 жыл бұрын

  • Nice work.

    @ruatarengsicolneyrengsi8924@ruatarengsicolneyrengsi8924 Жыл бұрын

  • Pozdav, redovno pratim tvoj kanal, sve pohvale...planiram da napravim nesto slicno i u fazi sam kupovine kompresora, da li bi bio dovoljan od 100l 2.2kw?za hobi potrebe naravno.sta mislis o besumnim dosta brzo nabijaju pritisak a i ima kineskih jeftino sa dobrim deklarisanim protokom koji je pretpostavljam daleko od realnom ali $$$

    @nebojsa948@nebojsa9483 жыл бұрын

  • Wow

    @alessandropezzella4891@alessandropezzella48914 жыл бұрын

  • Vorrei sapere a quanti attimosfete va riempita la bombola per l'insabiatrice per poter funzionare correttamente. Grazie

    @domenicooppedisano1693@domenicooppedisano16933 жыл бұрын

  • Pozdrav majstore, pre svega odusevljen sam tvojim radovima sto sam pogledao na tvom kanalu, evo bas ovih dana gledam po internetu, planiram da napravim peskaru poput ove, pa sam tako i naleteo na tvoj kanal. Svaka cast na trudu i radu. Nego imam jednu nedoumicu, ja planiram da napravim peskaru od plinske boce manju. Pa me zanima nesto ja imam italijanski kompresor FINI boca kapaciteta 50l, sta mislis da li bi on mogao da zadovolji potrebe peskare? A planiram sebi da opeskarim traktorsku prikolicu i jos neke stvarcice. Hvala unapred.

    @petricko7085@petricko70854 жыл бұрын

    • Nazalost kompresor nece moci da zadovolji te tvoje potrebe,jer ce vise trositi vazduh nego sto napumpava.Pozdrav

      @peChoOO@peChoOO4 жыл бұрын

    • @@peChoOO Znaci cetka, smirgla i fiberka mi ne ginu... :D

      @petricko7085@petricko70854 жыл бұрын

  • Anyone have experience using clear pex for short hose, sections. It's used in as my air lines to reels... If sandblaster jams up any more, I'm thinking it's my next step. Most blockages have been able to clear with back pressure, shutting valve to the tank lines.

    @movaughn20@movaughn20 Жыл бұрын

  • Beautiful

    @jaydmatacarita@jaydmatacarita3 жыл бұрын

  • Nice. Pozdrawiam z Polski

    @Marcin5819@Marcin58194 жыл бұрын

  • Podziwiam ludzi uzywajacych szlifierki bez oslony

    @87swiezak1987@87swiezak19874 жыл бұрын

  • Usar lixadeira sem proteção é o mesmo que jogar roleta russa😁

    @fabiohenriquebenedetti4007@fabiohenriquebenedetti40074 жыл бұрын

  • Great jobs body , thank you appreciated

    @qomeedesign2918@qomeedesign2918 Жыл бұрын

  • Reckon the disc sander would do it quicker and as well lol

    @jimlepeu577@jimlepeu5774 жыл бұрын

  • Came here to watch a sand blasting video, stayed for the ultimate repurpose video.

    @damienmikkelsen6056@damienmikkelsen6056 Жыл бұрын

  • Od čega je ta boca?

    @shoneskywalker@shoneskywalker2 жыл бұрын

  • Q idea amigo

    @gabrieltomas7265@gabrieltomas72654 жыл бұрын

  • Quanto costerebbe uno così se lei lo venderebbe?

    @pasqualetriggiani1@pasqualetriggiani1 Жыл бұрын

  • Add yourself a safety pop off valve pal

    @officialmysteriousrider6327@officialmysteriousrider63274 жыл бұрын

    • The lid has safety valve on itself

      @peChoOO@peChoOO4 жыл бұрын

  • Wooooooooow

    @goldenhands5295@goldenhands52954 жыл бұрын

  • I used the sandblaster to sandblast the sandblaster

    @orkell8195@orkell81954 жыл бұрын

    • That's so meta.

      @jimmymac601@jimmymac6014 жыл бұрын

    • You used the sandblaster to sandblast the sandblaster that was used to sandblast parts for new sandblaster. Lol, getting weird 😀

      @jw200@jw2004 жыл бұрын

  • sin la llave de abajo no podes controlar la cantidad de arena que sale y vas a vaciar el tanque en un rato.

    @eduardovarela4261@eduardovarela42612 жыл бұрын

  • Hallo mr apaka bisa isi cat sebagai alat semprot

    @eghychannel@eghychannel Жыл бұрын

  • y a Dónde consigues la arena

    @ricardovillanueva690@ricardovillanueva6902 жыл бұрын

  • Hola amigo viera que he hecho una arenadora como el de usted pero no me funciona biensólo que yo no puedo mandarle las fotos o vídeos para que usted vea yo le hice todo el a los instalaciones pero no no sale la arena o el arena qué es necesario que sea que sea ordinario o fina yo le probé la fina no sale nomás sólo queda pegado adentro pero no le he probado las ordinarias hace un poquito no no granudo pues pero no sé cómo sería

    @gabrieltomas7265@gabrieltomas72654 жыл бұрын

  • Un buentrávajo eselente

    @luisgermanortegasuarez985@luisgermanortegasuarez9852 жыл бұрын

  • بغيت نتواصل معاك كيفاش ندير

    @fjjfdjdj8569@fjjfdjdj85693 жыл бұрын

  • Good

    @katoonprabpram923@katoonprabpram9233 жыл бұрын

  • Very entertaining! WARNING: Must be expert welder to weld a PRESSURE VESSEL. Or else *** EXPLOSION *** can occur during use!

    @chriscadman5715@chriscadman57154 жыл бұрын

    • Explosion of what ? Air? Only thing that can happen is fracturing.. unless all the welds on the tank go off at once..which is never gona happen . Unless you have something flamable inside..

      @vojislavdragic5090@vojislavdragic50904 жыл бұрын

    • @@vojislavdragic5090 Not true. All you need is one small area of weakness in the tank and especially on a weld joint, and !BOOM!: kzhead.info/sun/frqJj6VvnHmPq68/bejne.html I have a book I used when designing ASME pressure vessels. Every weld had to be CERTIFIED by special inspection processes. All materials and construction must adhere to the ASME standard. If not, the tank fails and must be discarded. Air, like steam is VERY DANGEROUS to play with!

      @chriscadman5715@chriscadman57154 жыл бұрын

    • Hes right you know. If you dont know, and i mean if you are not absolutely certain of what has been inside of the container, you shouldn't weld it. Any flammable materials may cause an explosion. If your welds are not very good, and i mean professional and certifiable, they could fail. In any pressure vessel, the risk of explosion from even small pressures, say 3 psi. On a 100 gallon container, you now have thousands of pounds of pressure and if a weld fails and cracks open, the metal can follow suit, and hey presto they have to mop up most of whoever was near it. Seriously. Pressure vessels are dangerous and unless you know exactly what you're doing, please don't play with them. People die every year from this stuff.

      @SuicideSanta3@SuicideSanta34 жыл бұрын

  • واااو صح لسانك كلام جميل

    @user-vd1lc5sd2p@user-vd1lc5sd2p2 жыл бұрын

  • Someone said: " i created a sandblaster to sandblast the sandblaster i created"

    @Garrett053@Garrett0533 жыл бұрын

  • Probao samo je problem sto pesak pojede ventile i ispod boce i na kraju creva .

    @hromiranjetodorovic5808@hromiranjetodorovic58083 жыл бұрын

  • Engine paint ok..ser..

    @aigaming3418@aigaming34184 жыл бұрын

  • شكرت

    @fjjfdjdj8569@fjjfdjdj85693 жыл бұрын

  • there are uncountable videos like this in youtube. But what nobody expose is the required compressor…

    @derMaggus@derMaggus4 жыл бұрын

    • i am currently making a compressor designed for sandblaster,stay tuned

      @peChoOO@peChoOO4 жыл бұрын

    • @@peChoOO sounds great!

      @derMaggus@derMaggus4 жыл бұрын

    • @@derMaggus kzhead.info/sun/mc1-pcapmaywfaM/bejne.html Compressor done!!! :)

      @peChoOO@peChoOO4 жыл бұрын

  • Esto va a matar tu compresor por que esta trabajando doble el compresor esta trabajando para llenar el tanque de arena mas para llenar el tanque del mismo compresor.

    @yosoydpfknr2855@yosoydpfknr28554 жыл бұрын

  • So faltou uma valvula de segurança. Se passou despercebido perdão

    @neomenezes1@neomenezes13 жыл бұрын

  • Welding on a pressure vesel is not recommended AT ALL. Basically you are creating a bomb. Be safe out there.

    @mikelfernandezgomez1666@mikelfernandezgomez16664 жыл бұрын

  • Cuanto cuesta

    @JuanHernandez-xz4hb@JuanHernandez-xz4hb2 жыл бұрын

  • So he turns an old propane tank into a compressor then decides he needs a sand blaster, so turns the compressor into one. Shit now I need an air compressor to run the blaster.

    @tomsawyer247@tomsawyer2473 жыл бұрын

  • I had a nice home now I live on the beach without the ocean... No seriously don't sandblast in the garage...

    @gurjindersingh199@gurjindersingh1994 жыл бұрын

  • Сандбластер? А що написати піскострум не вийшло? Не чув щоб англомовні люди писали piskostrym наприклад

    @Garmatnuy@Garmatnuy4 жыл бұрын

  • Que difícil de aser

    @eliceoguerrero7596@eliceoguerrero75963 жыл бұрын

  • Nunca se debe soldar sobre metal limpiado con limpiafrenos, produce gases toxicos al soldar. Deberías utiilzar acetona mejor.

    @santiou@santiou4 жыл бұрын
KZhead