KZhead
Тәжірибелік нұсқаулар және стиль

Mini Jet Boat Build - Part 1 - Jetstream 12' Buccaneer

Making Stuff
2022 ж. 7 Шіл.
96 318 Рет қаралды
Жүктеу

The mini jet boat project begins! In this video a 12ft Buccaneer kit made by Jet Stream Adventure Boats, is assembled!
🛠 Tools and Parts Used In This Video:
Lincoln MP 210 Welder - amzn.to/3uof5AF
Lincoln Spool Gun - amzn.to/3aieLws
YesWelder MIG 250A Pro MIG Welder- yeswelder.com/products/mig-we...
YesWelder Spool Gun - yeswelder.com/collections/wel...
Welding Clamps - amzn.to/3NIGh3V
Welding Gloves - amzn.to/3R2lxXw
👉Other Making Stuff Videos You Might Like:
YesWelder MIG PRO 250 Review - • YesWelder MIG 250 PRO ...
YesWelder MIG 270K Review - • YesWelder MIG 270K Rev...
Diy Tracked Vehicle - • Taking It For A Spin -...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
👉Thanks for watching!
(C)2022 TMI Enterprises Inc.
#makingstuff
#minijetboat
#jetboat
#jetsteareamadventureboats
#goodcontentgang

Пікірлер

  • Help me name this boat! Leave your suggestions in the comments.

    @MakingStuff@MakingStuff Жыл бұрын

    • spirit boat❤️❤️❤️❤️

      @abdullabud9133@abdullabud9133 Жыл бұрын

    • Me mande o link de onde eu possa comprar esse kit sou do Brasil obrigado.

      @MegaPoblema@MegaPoblema Жыл бұрын

    • Skippy

      @Rinkboard@Rinkboard Жыл бұрын

    • Jet for fun

      @t2evride867@t2evride8678 ай бұрын

    • Larry

      @staceymccloud6@staceymccloud6Ай бұрын

  • Very nice and interesting project. Make sure you have a tether cord and cut off switch installed so when it throws you out of the boat it'll shut down!! LOL!! Looking forward to the next video.

    @andyb7754@andyb7754 Жыл бұрын

    • The jet ski has that already built in and yes I will be using it. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • FUN! This has been on my bucket list for years.

    @sixtyfiveford@sixtyfiveford Жыл бұрын

  • This is an awesome project. Can't wait to see it finished!

    @BaxterKaleb@BaxterKaleb Жыл бұрын

    • You and me both!

      @MakingStuff@MakingStuff Жыл бұрын

  • "Im very happy with the way this weld turned out" lol, no im kidding, im a welder i do custom fabrication all day, and you made me feel good about my welds, awesome project man, subscribed

    @BeastMode-yk5rh@BeastMode-yk5rh Жыл бұрын

    • Thank you very much!

      @MakingStuff@MakingStuff Жыл бұрын

  • Looking great! Making Waves

    @phynixbrd@phynixbrd Жыл бұрын

    • Thanks!

      @MakingStuff@MakingStuff Жыл бұрын

  • My favourite bit was folding the aluminium sheet, great skills you have.

    @allthegearnoidea6752@allthegearnoidea67525 ай бұрын

    • Thank you!

      @MakingStuff@MakingStuff5 ай бұрын

  • Show vc é um artista

    @valdemirrodrigues30@valdemirrodrigues30 Жыл бұрын

  • That looks like a fun project. Thanks for sharing 👍

    @aarondickenson7146@aarondickenson7146 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • I'm really excited about this project!

    @jonvannatto@jonvannatto Жыл бұрын

    • Me too! Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • That is a lot of aluminum or aluminium. You are doing a great job of welding.

    @AmateurRedneckWorkshop@AmateurRedneckWorkshop Жыл бұрын

    • Yeah I was a little intimidated at first but practiced a bunch before actually starting on the kit.

      @MakingStuff@MakingStuff Жыл бұрын

  • Nice project Bob, I love it.

    @rodswim492@rodswim492 Жыл бұрын

    • Thanks 👍

      @MakingStuff@MakingStuff Жыл бұрын

  • Making Stuff is a good name...

    @st170ish@st170ish Жыл бұрын

  • This is going to be a great project to watch from start to finish. Can't wait to see how it turns out! Tryin' to think of a good jet boat name...

    @MrGoosePit@MrGoosePit Жыл бұрын

    • Thanks!

      @MakingStuff@MakingStuff Жыл бұрын

  • Good stuff! Cool that your doing a jet boat build!

    @DktheWelder@DktheWelder Жыл бұрын

    • Thanks 👍

      @MakingStuff@MakingStuff Жыл бұрын

  • This is so amazing, congratulations from Brazil....

    @djavanferreiradeandrade5627@djavanferreiradeandrade5627 Жыл бұрын

    • Hello Brazil, thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Mantap salam dari Bonek Surabaya Indonesia di tunggu kreasi selanjutnya bos

    @erwinfirmansyah2065@erwinfirmansyah2065 Жыл бұрын

  • Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

    @brentsmith5647@brentsmith5647 Жыл бұрын

    • Glad you enjoyed it

      @MakingStuff@MakingStuff Жыл бұрын

  • Great vidéo ! Very fun project !

    @splyit@splyit Жыл бұрын

    • It has been a blast to work on so far. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • you're awesome brotha! this is a great build so far !

    @LIFEbyBrandon@LIFEbyBrandon Жыл бұрын

    • Thanks a bunch!

      @MakingStuff@MakingStuff Жыл бұрын

  • Should be a fun little boat. Silver streak, assuming you leave it that natural color. Maybe too easy, but should be accurate.

    @johnmccanntruth@johnmccanntruth Жыл бұрын

    • Yeah, Silver Streak, like the train 🙃

      @bob_mosavo@bob_mosavo Жыл бұрын

    • I like it!

      @MakingStuff@MakingStuff Жыл бұрын

    • @@bob_mosavo yes, good movie!

      @johnmccanntruth@johnmccanntruth Жыл бұрын

  • Cool !!!

    @uibsen@uibsen Жыл бұрын

  • Som’em ain’t right! -for the name. Just started my boat build yesterday! Same kit as yours but I’ve got the four seat option. Great video and good luck with the build!

    @marksteinwand8510@marksteinwand8510 Жыл бұрын

    • Hopefully I'll be able to start on mine again soon. Sometimes life takes you a different direction than what you want to go.

      @MakingStuff@MakingStuff Жыл бұрын

  • We have nearly the same interests across the board. I’ve been eyeing a watts craft for years.

    @rceric1@rceric1 Жыл бұрын

    • We are a rare breed. I can't find anyone around where I live that is into the same things as I am. Thanks for watching.

      @MakingStuff@MakingStuff Жыл бұрын

  • Awesome project! Boat names: Boaty McJetFace, DIY JetBy, Bob's Skip

    @OverlandTrailer@OverlandTrailer Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Good job man you may name it Bullet.

    @romiolover6852@romiolover6852 Жыл бұрын

  • very smart guy

    @vanle974@vanle97411 ай бұрын

  • Great Job Bob. Good ship Fartgas

    @terryfrymire2705@terryfrymire2705 Жыл бұрын

    • Ha,Ha. How's it going in Texas?

      @MakingStuff@MakingStuff Жыл бұрын

  • Boat Name: MS ROCKS People who don't know you will think it's a female who rocks the boat. Don't discard your pallets. They make awesome raised beds

    @SystemsPlanet@SystemsPlanet Жыл бұрын

  • Sar very good ❤️ part 2 give ok

    @mohan.2230@mohan.2230 Жыл бұрын

  • Awesome video bud. This type of content is a++++++

    @cn8484@cn84843 ай бұрын

    • Glad you enjoy it!

      @MakingStuff@MakingStuff3 ай бұрын

  • JET STUFF

    @scottcarroll4360@scottcarroll4360 Жыл бұрын

  • That boat jump looked like if it had of went any more wrong it would have been a bad day

    @PhantomPanic@PhantomPanic9 ай бұрын

  • That is so cool but crazy fast and would you guys able able built a single man cabin boat fishing rig with outboard motor setup that be good investment on sigle man suze boats for any kind of spirts racings or fishing trips 🤞

    @michaelosullivan4112@michaelosullivan4112 Жыл бұрын

  • Rad!

    @pokerman9108@pokerman910811 ай бұрын

  • This is going to be a awesome series you should Name it The broken bit

    @MegaBCAD@MegaBCAD Жыл бұрын

    • Ha that is a good name, thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Very cool. How many hours of welding would you say is involved to put this kit together? Also what size mig welder would I need? Appreciate any info. Thanks!

    @Tapphouse@Tapphouse9 ай бұрын

    • It has taken me a year to get this far. Of course I can't work on it 8 hours a day either. The best aluminum welder I have used is the Yeswelder YWM-211P with spool gun. yeswelder.com/collections/welder-cutter/products/yeswelder-ywm-211p-double-pulse-aluminum-mig-welder?ref=makingstuff

      @MakingStuff@MakingStuff9 ай бұрын

  • Hi 🌹❤️🌹honestly you are an amazing man. I congratulate you because you have all these ideas for creativity and useful things I suggest you call this boat (. spirit boat ) 🌹🌹

    @abdullabud9133@abdullabud9133 Жыл бұрын

    • Wow, thank you

      @MakingStuff@MakingStuff Жыл бұрын

  • ❤ Love

    @tarekhamod7831@tarekhamod78318 ай бұрын

  • Ông nên chia sẽ kích thướt .

    @tranvantin1815@tranvantin18159 ай бұрын

  • what is the correct name of the speed squares with the large flange for you to clamp onto called???

    @mitchellanic8227@mitchellanic82272 ай бұрын

  • What kind an size of welding machine do u have?

    @mushroomon@mushroomon7 ай бұрын

  • Not questioning since idk much about welding aluminum but I did weld doing a very similar process for about a year making sounds dampening rooms and such. My question is do you have to push your welds? With how thin the material was I was working with usually pushing the weld required either moving really quick and getting a crappy weld or drawing the weld towards you allowing for a larger tac/weld

    @Ronnie-NE-Fishin@Ronnie-NE-Fishin11 ай бұрын

    • Yes you are suppose to push the weld with aluminum.

      @MakingStuff@MakingStuff11 ай бұрын

  • Độ dầy tấm nhôm là bao nhiêu milimet ?

    @tranvantin1815@tranvantin18158 ай бұрын

  • I love the big project that you're doing I love watching your channel and that I do have to ask.... you're doing this great big thing pushing yes welders and my curiosity runs really hard 10 months ago you did a video with the yes welder 250p and you're talking about MIG welding aluminum now here you got this great project putting together a jet stream boat which I love but you're using a Lincoln welder with a spool gun instead of using the yeswelder with the mig gun?????? and I asked a question back when you were pushing the welder about what it can and cannot do so why would you use a Lincoln over to yes welder? and I'm not here to troll you or anything just a quick just a question why the change of heart on the boat??? I'm a long time subscriber so I'm not going nowhere..

    @danielsplayhouse3804@danielsplayhouse3804 Жыл бұрын

    • That's a good question. The hull of the boat is 1/4 inch. Both machines are rated at 3/16" which is close enough to get the job done. The Lincoln did a better job on the 1/4" so I started out using the Lincoln on the big stuff. I did use the Yeswlder on the brace that I made in the beginning of the video. There will also be some TIG welding in this project which will involve using a Yeswelder product. There are also other advantages the Yeswelder MIG has over the Lincoln which will be shown in future videos.

      @MakingStuff@MakingStuff Жыл бұрын

  • Hi Am inquiring what kind of welding machine are you using make and model?

    @patricknkenge6393@patricknkenge63939 ай бұрын

    • yeswelder.com/collections/welder-cutter/products/tig-welder-ywt-200dc?ref=makingstuff

      @MakingStuff@MakingStuff9 ай бұрын

  • How much was that boat kit?

    @confirm1022@confirm10222 ай бұрын

  • Im confused, was this beauty built with your YesWelder or the Lincoln welder ? Thx 🙏

    @MonstroLab@MonstroLab4 ай бұрын

    • Started with the Lincoln, then switched to YesWelder when they released the YWM-211P. Had the YesWelder been available when I started the build, I would have used it for the whole thing.

      @MakingStuff@MakingStuff4 ай бұрын

    • @@MakingStuff ok thanks!

      @MonstroLab@MonstroLab4 ай бұрын

  • Very cool Name on the boat She's squirly Thanks for the video

    @frankward709@frankward709 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Boat name NOT STOPPING I just bought my own kit from Jetstream which is the same as yours. I haven’t started building it yet but I am researching as much on KZhead as possible. Your first video is great but I was wondering if you could just do a little bit more details on the areas that you’ve run into problems or others could run into problems if they don’t know these little hidden secrets. I’ll keep watching and thanks for video and up coming ones.

    @petervaleri8752@petervaleri8752 Жыл бұрын

    • Other than the bottom not being cut correctly and the width not being 51.5 inches, I haven't had any problems.

      @MakingStuff@MakingStuff Жыл бұрын

    • @@MakingStuff bom dia, vc fez um ótimo trabalho !!...sou do Brasil e gostaria de saber onde consigo comprar um kit desse aí ? Todas as chapas já vem prontas para fazer as soldas ?

      @MegaPoblema@MegaPoblema Жыл бұрын

  • Do you do this whole project with an aluminum spool gun? No tig welding?

    @garrettp.5018@garrettp.5018 Жыл бұрын

    • So far it's just been Spool gun.

      @MakingStuff@MakingStuff Жыл бұрын

  • Супер! Есть у вас DXF файл?

    @freza-ekb@freza-ekb Жыл бұрын

  • Are all aluminum parts the same thickness? 3/16" or are there any smaller ones?

    @sobrevivenciaoumorte@sobrevivenciaoumorte Жыл бұрын

    • Smallest is 1/8th inch, thickest is 1/4"

      @MakingStuff@MakingStuff Жыл бұрын

  • Name for the boat "Bit broke" due to the issue with the hull profile.

    @CRJORDAN11@CRJORDAN11 Жыл бұрын

  • Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?

    @eaglealnoor8891@eaglealnoor8891 Жыл бұрын

  • Mini Nemo

    @georgehorman731@georgehorman73111 ай бұрын

  • That's some scary sheet(metal)!

    @Rebar77_real@Rebar77_real Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • What welder are you using? Cheers Fraser from New Zealand

    @SuperFlo5@SuperFlo5 Жыл бұрын

    • I started out with a Lincoln 210MP, but switched over to the YesWelder YWM-211P. I wish I had the Yeswelder from the begining of the project. It works much better on Aluminum. kzhead.info/sun/jN2Ima2aqp18jKs/bejne.html

      @MakingStuff@MakingStuff Жыл бұрын

  • Where did you order it from i need one buddy for thevrivers here near me

    @easternoakstaxidermyoutfit7817@easternoakstaxidermyoutfit78175 ай бұрын

    • www.jetstreamboats.com/

      @MakingStuff@MakingStuff4 ай бұрын

    • @@MakingStuff thank you sir

      @easternoakstaxidermyoutfit7817@easternoakstaxidermyoutfit78174 ай бұрын

  • Boa tarde,sou aqui do Brasil quero te fazer uma pergunta qual a espessura da chapa?

    @elizaelsobral3964@elizaelsobral3964 Жыл бұрын

    • Boa tarde, que eu sei a parte de baixo ele usam 1/4"(6,35mm) as laterais 1/8"(3mm) tudo chapa de aluminio 6061 t6

      @saymoncervantes3620@saymoncervantes3620 Жыл бұрын

  • Name: play bouy. I know it’s gonna take some time until it’s ready to hit the water but I’d love to watch this as one big video montage start to finish, like a hour and half long. Either way I’ll still watch tho lol

    @changethegame113@changethegame113 Жыл бұрын

    • Good idea, maybe I can do that. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • I would love to see somebody take and make this boat using a Jon boat, maybe a 14-footer

    @glbaker5595@glbaker5595 Жыл бұрын

    • I'm pretty sure someone has already done this on KZhead, but yeah that would be cool too. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • What brand/model welder and spoolgun did you use?

    @danellison256@danellison256 Жыл бұрын

    • So far it has been mostly Lincoln MP210 with Lincoln Spool Gun.

      @MakingStuff@MakingStuff Жыл бұрын

    • How much did the kit weigh?

      @historobb@historobb9 ай бұрын

  • Lazer Hawk

    @abefroman5191@abefroman519111 ай бұрын

  • Jetboats were invented in New Zealand, so call it Kiwi 👍

    @Paulman50@Paulman50 Жыл бұрын

    • LOL, thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • When's the next video coming out? I can't wait to see how this boat turns out

    @JJKILLER2015@JJKILLER2015 Жыл бұрын

    • Soon I hope. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Mig Mermaid

    @sickvic3909@sickvic3909 Жыл бұрын

  • Whatz the cost of those welders bro

    @Manu-eq4mv@Manu-eq4mv Жыл бұрын

    • Lincoln - amzn.to/3uof5AF Yes Welder - yeswelder.com/products/mig-welder-250a?ref=makingstuff

      @MakingStuff@MakingStuff Жыл бұрын

  • Name- "JALO" because it's hot and everyone will want to get in it!

    @MuzzahA1@MuzzahA1 Жыл бұрын

  • Did you get compensation for the mistake?

    @archiebuckingham3935@archiebuckingham39352 ай бұрын

    • Not monetarily, but yes they made up for it.

      @MakingStuff@MakingStuff2 ай бұрын

  • How much was the kit from Jetstream

    @jims2286@jims22866 ай бұрын

    • All of the pricing info is on their website.

      @MakingStuff@MakingStuff6 ай бұрын

  • Made something

    @Pdpawlak@Pdpawlak Жыл бұрын

  • how much would it cost to ask a welder for a job for a 6feet boat?

    @user-tj8go8vq6q@user-tj8go8vq6q11 ай бұрын

    • Would probably be cheaper to just buy the hull already welded. The last I looked, Jetstream still offered fully welded hulls.

      @MakingStuff@MakingStuff10 ай бұрын

  • How much ps does it have?

    @Luderspieler@Luderspieler6 ай бұрын

    • ps?

      @MakingStuff@MakingStuff6 ай бұрын

    • @@MakingStuff oh sorry i meant horse power (0.7 kw)

      @Luderspieler@Luderspieler6 ай бұрын

    • @@Luderspieler No probllem. It's 250HP.

      @MakingStuff@MakingStuff6 ай бұрын

    • @@MakingStuff thanks

      @Luderspieler@Luderspieler6 ай бұрын

  • name... Making waves

    @rontidd6551@rontidd6551 Жыл бұрын

  • "J.B. Welded" (jet boat)

    @42Fab@42Fab Жыл бұрын

    • Are you making fun of my welds? LOL. Thanks for watching. Did you stop making videos?

      @MakingStuff@MakingStuff Жыл бұрын

    • @@MakingStuff it's been slow, but haven't quit

      @42Fab@42Fab Жыл бұрын

    • Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?

      @eaglealnoor8891@eaglealnoor8891 Жыл бұрын

  • BoatyJetBoatFace

    @marcbotnope1728@marcbotnope1728 Жыл бұрын

  • Some assembly required 🙂

    @JG-kv4oi@JG-kv4oi Жыл бұрын

    • I like it. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Jetson

    @foxwood67@foxwood67 Жыл бұрын

    • As long as it doesn't sounds like the Jetson's car, LOL. Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Name it the S.S. Minnow... 😆

    @shootgp@shootgp Жыл бұрын

    • You don't look like the Professor, but you look like you could be one.

      @shootgp@shootgp Жыл бұрын

    • Just don't take it on a 3 hour tour, LOL.

      @MakingStuff@MakingStuff Жыл бұрын

  • Shaina

    @Key_Capz_@Key_Capz_ Жыл бұрын

  • Call it HMS Stuff :)

    @ukaszSkowerski@ukaszSkowerski Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Maken Wake

    @timloughman1952@timloughman1952 Жыл бұрын

  • Hair Raiser

    @troyrebeccaamburgey4498@troyrebeccaamburgey4498 Жыл бұрын

    • Good One!

      @MakingStuff@MakingStuff Жыл бұрын

  • Trying to watch this with very low volume in bed with people sleeping next door, of course there had to be sirens..🙈

    @RMXbass@RMXbass Жыл бұрын

  • Quiero comprar una paga de esas la embiaran a

    @nohemiulloa2618@nohemiulloa26188 ай бұрын

  • Call it "boaty mc boat face"

    @mp-xt2rg@mp-xt2rg6 ай бұрын

  • Looks like a river rat to me, great video.....

    @kentuckytrapper780@kentuckytrapper780 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Bathtub

    @hoo3370@hoo3370 Жыл бұрын

  • Alcoa maru

    @rodwilliams1722@rodwilliams1722 Жыл бұрын

  • A name for your boat “ Broken Bit “ there’s a story behind the name

    @trishstefanuk5619@trishstefanuk5619 Жыл бұрын

    • Good idea. I'm not done with it yet so there may be more stories, LOL.

      @MakingStuff@MakingStuff Жыл бұрын

  • homunculus

    @paulwyleciol3459@paulwyleciol3459 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • Boop

    @middleway1885@middleway18859 ай бұрын

  • Broken bits

    @bobbywinkles9424@bobbywinkles9424 Жыл бұрын

  • Stuffinater

    @bcstrings1@bcstrings1 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

    • I’m a machinist by trade and wish I could afford to start my own shop out of work right now it’s killer to see the stuff you do keep it up for us that wish we could -- you rock man

      @bcstrings1@bcstrings1 Жыл бұрын

  • Q

    @bartekkruczek618@bartekkruczek618 Жыл бұрын

  • Wet Dream.

    @jimfelton1@jimfelton1 Жыл бұрын

    • Thanks for watching!

      @MakingStuff@MakingStuff Жыл бұрын

  • is me take bigboat 911 navy @ everyboat navy@polish rever @sia(puminn-5A)

    @user-mq3ii7up6t@user-mq3ii7up6t11 ай бұрын
KZhead