Great attempt Sir. Please take note of the following: Change the central rod to iron. It seems you used copper which is not a ferromagnetic material. Iron is a good one and would conduct the magnetic field generated by the excited motor to your polar coils. After you have changed the core rod to iron with increased diameter, you will need to excite the motor coil with external AC for it to start working. You are almost there. Don't give up. Thank you.
@godwinabah25825 ай бұрын
Yes I agree, Ferrite is the most preferred.
@user-zm8ul2kt9o3 ай бұрын
Could you also start with an AC capacitor, for example 30 uF? How can you stop the magnetic field and short-circuit it again?
@musicman53642 ай бұрын
Please do not stop I am looking at building #2 I have a motor. I am going to build a frame for it soon.
@AndrewduToitАй бұрын
Hello, I'm not planning on stopping anytime soon. Please keep us posted on your progress. Good luck on your build. Thank you.
@ScottFogarty-iv9wtАй бұрын
Try Alloy bar and you're good to go, I'm with you all the way I'd love to see you finish it don't give just yet.
@carltonwizzle14206 ай бұрын
Thank you!
@ScottFogarty-iv9wt6 ай бұрын
Das Gerät funktioniert zwingend nur mit der Original Aluminium-Silberlegierung die für das Original verwendet wird. Das wird in einen 2. Video extra nochmals von den Konstrukteuren des Originals gesagt, das der Selbstbau erfolglos ist ohne dieser Legierung. Diese Legierung wurde im Modell 2 für den Rotor und im Modell 1 für die umgebaute Lichtmaschine auch verwendet, auch das wurde in nachfolgenden Videos offen gelegt. Diese Legierung ist nach ihren Aussagen patentrechtlich geschützt und wurde ursprünglich für eine andere Anwendung entwickelt. Sie ist sehr schwer herzustellen und nicht frei käuflich zu erwerben, sondern nur für ganz spezielle Anwendungen entwickelt, sie können sie auch nicht in größeren Mengen beziehen. Die Ursache warum das nur mit dieser Legierung funktioniert liegt im Aufbau des Atomaren Gitters der Legierung, das wegen der extremen Verschiedenheit der Metalle ein ganz besonderes ist, denn es kann in die Quantenfluktuation eingreifen, indem diese Struktur des Atomgitters eine Potentialdifferenz im isotropen Quantenfeld bewirkt, die dann um sich wieder Auszugleichen einen Stromfluss in diesen Metall generiert. Aber dieser Zustand wird nur mit den Zusammenwirken mit den Magneten und den Spulen und der Anordnung als Schwingkreis erreicht, dagegen wird in der Maschine Nr, 1 und 2 keine Schwingkreiskonfiguration gewählt, darum ist dort ein Rotor nötig. Vergleichbar ist das mit einen Wellenkraftwerk als Modell. Der Wind erzeugt die Wellen auf den Wasser ( die Quantenfluktuation ), mit denen kann ich ohne spezielle Konstruktion keinen Strom gewinnen, baut man aber einen schräg auflaufenden Damm, so können die oberen Teile der Welle in das eingedämmte Becken strömen ( Der Damm ist das besondere Atomgitter ), bei jeder Welle der Wellenberg, so erhöht sich der Wasserstand im Becken gegenüber der See ( Auf der einen Seite des Atomgitters sind einige Teilchen mehr vorhanden, anscheinend Elektronen ), diesen kann ich dann über ein Rohrsystem ( Der Stab mit Resonanzmaß ) mit Turbine abfließen lassen und das Potentialgefälle durch den erhöhten Wasserstand treibt dann die Turbine an und der angeschlossene Generator erzeugt Strom nach den regeln der Physik ( Im Stab erzeugt der Strom ein Magnetfeld, dieses Induziert eine Spannung in den Spulen). Genau diesen Damm stellt die Struktur dieser Legierung für die Quantenfluktuation dar, sie erzeugt das " Gefälle " und das wird durch Elektronenfluss ausgeglichen und die Anordnung als Schwingkreis bedeutet nur das der Damm bei 50 Hz 50 mal je Sekunde um 180° gedreht wird so das sich die Stromrichtung ebenfalls 50 mal je Sekunde um 180 ° dreht und somit in den Spulen einen Wechselstrom von 50 Hz induziert. Die Abmessungen des Stabes, die Induktivität der Spulen und die Magnetkraft der Magnete haben die Eigenfrequenz von 50 Hz, damit liegt Resonanz vor und somit eine Verstärkung des Effektes. Da die Magnete und die Spulen aus einer 230 Volt Maschine stammen musste nur die Stablänge bei verschiedenen Stabdicken berechnet werden, das geht nach der Formel der Berechnung eines Dipols beim Antennenbau. Damit funktioniert diese Maschine nur wenn diese Parameter eingehalten werden und da die Legierung nicht erhältlich ist funktioniert es nicht. Das Ziel der Organisation, die diese Geräte baute, ist es den Menschen zu zeigen, dass es diese Emission- freie Energietechnologie gibt, damit sie bei den Patengebern druck machen diese Erfindung frei zu geben, das wollen sie aber nicht, denn das hat tiefst greifende politische und gesellschaftliche Konsequenzen.
@stephanlochmann81175 ай бұрын
The center metal bar definitely needs to be conductive because it needs to carry the current from the stator to the coils in the motor. I am guessing that the silver-alum bar used in the inventor's video is used rather than steel or cooper is because of the conductive properties of the silver-alum metal is more efficient in carrying the electric field from each of the stators to the coil in the motor. In other words there is less energy loss with the silver-alum. The coils in the motor housing needs to be initially energized at 230v and maintained at 230v to continually produce power.
@joecoyle31172 ай бұрын
one more thing, by adding silicon to the formula would add uniformity to th flux field. But silicon-steel is normally in the sheet form to reduce heat.
@user-zm8ul2kt9o4 ай бұрын
Keep going, I think not enough power to fire it up. You getting closer every step, keep going don’t give up. Just imagine you have to start the motor so you can try it with electric outlet and as you mentioned on video adding a coils could be useful as well.
@ivan5dworld6 ай бұрын
Hello, Thanks for your support. I appreciate it!
@ScottFogarty-iv9wt6 ай бұрын
Finally, when you come back and update, I look forward to hearing even happier news from you
@haipomao80006 ай бұрын
Thank you!
@ScottFogarty-iv9wt6 ай бұрын
I noticed from your video that it seems you have the power strip not connected to the correct post on the motor. From the Liberty Engine #3 video, they do not have anything connected to the center post (Other the the wire from the coil). They are using the right and left post. I am not sure if you have corrected this or not. I also noticed that you are also using the center post on the other side where the wires from the microwave coils (Stator) are connected. Again, in their video they are only using the right and left post. Please clarify if I am missing something. When you turn the synchronous switch, I do not see it generating the needed 230v to energize the stator.
@joecoyle31172 ай бұрын
Тю.... да это же так просто !! Резонанс-его величие !! Вал внутри статора-это резонатор,и всего лишь.
@vladast29085 ай бұрын
@Scott KZhead AI brought your video up again and I empathize with your frustration. I think I left a comment on one of your videos again saying it is the problem of the bar. Maybe this time I explain a little bit more. Let's step back and think about the fundamental function of this setup. Take the motor stator out, leaving the cores, ring magnets, and the bar. The reason for the ring magnets is that they are the source of magnetic fields that generate electricity. However, the magnet field in these rings is not oscillating, and therefore no electricity can be produced (the fundamental of an electrical generator). For the field to oscillate, the bar must have the ability to conduct or rebel the magnetic field, so that when the field on one side is moving it also moves the field on the other side. That is the condition you need for this machine. The role of the stator is to trigger that oscillation and add a little bit of magnetic field to it (like giving a push to a swing). That is the idea of this generator. Now, for this to work, the key is the bar and it must have the capability to conduct some magnetic field and also rebel it. If you think about it, the ONLY way for this machine to be over unity (loosely term) is by using the magnetic field of the ring magnets and not the magnetic field of the stator. If this machine uses the magnetic field of the stator to generate electricity then it won't work because of Lenz's law. Hence, the copper bar won't work in this case because you don't need electrical conduction characteristics. You need magnetic conduction characteristics (or at least rebelling). This is why the original video uses (according to the video) a combination of diamagnetic (rebel magnet) and paramagnetic (weak magnetic conduction). Good luck to you if you decide to continue.
@believeornot125 ай бұрын
I have every intention! Thank You for your comments
@ScottFogarty-iv9wt5 ай бұрын
😮
@user-xt3wt8cd7d5 ай бұрын
Are your magnets repelling?
@robertneal71852 ай бұрын
i'm curious if you did this with a 3 phase motor like their video and then output it to some form of 10 X 1 transformer like a buck boost style auto transformer to drop to 120V? they claim that the center rod is non magnetic so minus some secret alloy i wonder if 100% stainless steel would work?
@captaindrp825 ай бұрын
Hello. I'm considering building it with 3 phase, 220 volts transformer cores and coils. Then stepping it down usable 110 to 120 volts. I need an electrician to install a 220 volt line. Even with that, the choice of material for the bar is what I'm struggling with. I've already built it according to video (except for 3 phase and their bar). They don't make 3 phase 120 volt asynchronous motors. We'll see. Thanks!
@ScottFogarty-iv9wt5 ай бұрын
Your problem may have to do to the length of the core rod and the shape of the flex fields of the coil. The magnets on the coil make the flex field ob-round instead of apple shape. So you may want to map the field of each coil assembly with a gose meter to see its shape. You want the field shape to be wide enough to contact the coils of the generator. this adjustment is possible by adding or subtracting magnets. A fat field would be the best for max induction. Too fat will interrupt other electric equipment. Just thinking.
@user-zm8ul2kt9o4 ай бұрын
@thelibertyengineproject ... they say to me .... We say clearly that it doesn't work if we don't make the bar with the special alloy. The cylinder is the heart of the machine. it is a non-magnetic alloy ... when I try a different way
@krismarc66256 ай бұрын
The bracketts holding the transformer and the rod in between is it aluminum ? he made them out of steel ??
@user-yo8xf1ld7z6 ай бұрын
Hello, They are steel. I bought them rather than making them myself.The screw from the core makes direct contact with the bar. Thank you
@ScottFogarty-iv9wt6 ай бұрын
Maybe try to use sliver coated wire to wrap around the bar ????. I don't know. other than that maybe go to yard sells and find cheap sliver plate ???? use the foundry outside to mix sliver and aluminum,then you could add one or the other till you found the correct mix. Best of luck.
@tectalabyss6 ай бұрын
Hello, Now you're thinking. That's a great idea! It probably doesn't even need to be silver if resonance is involved but we'll see. In fact, it would be easier to calculate the frequencies but we'll still see. Thank you!
@ScottFogarty-iv9wt6 ай бұрын
@@ScottFogarty-iv9wt Thank you Sir. And please stay with it. All my best.
@tectalabyss6 ай бұрын
perhaps a voltage of 220 volts is needed to start and excite the winding but I don't know, what is really needed and, perhaps distribution of motor contacts without a jumper, the original video showed 3 jumpers between the bolts
@mySKYsource6 ай бұрын
Три перемычки указывают на включение фаз дв-ля треугольником!
@user-ey9dc9tv8e6 ай бұрын
If the liberty is not a scam, then you are correct that a specific alloy bar must be made because this is a one component that the KZhead continues to say is a trade secret. And of course, that would be a perfect façade for a sham.. certainly is good to see you trying to put it to a test.
@gkeith41204 ай бұрын
How fast are you turning the 220V motor? 😢, just curious also about that?
@elmultimediaschoolofartscu39246 ай бұрын
Hello, Many different speeds with a meter connected to measure the voltage.The voltage has reached over 120 volts. That's why I think I need to connect the start capacitor. (Asynchronous, single phase, 120 volt Motor is what I am using My coils are 120 Volt) I am attempting to build a 120 volt version, Thank you!
@ScottFogarty-iv9wt6 ай бұрын
Ive been playing with this idea for a while now and im using copper as well for the rod. silver is too expensive to melt and experiment with. if you use a 3 phase motor that puts out higher power you could step that power down to use it with your power strip with a converter. dont give up yet.
@jakehall99756 ай бұрын
Hello, Thank you for the idea. I don't know if this is true or not but a comment was made that without a rotor within the motor's windings, the bar, in its place, will want to act as a rotor and turn. That would probably be a good reason not to have that bar made from anything that was magnetic and capable of acting as a rotor. If it were slightly magnetic and wanted to turn, the "locking mechanism" of the bar between the two opposing cores might secure it enough but if this is true, I wouldn't want to test it. Good luck with your build. Thanks again.
@ScottFogarty-iv9wt6 ай бұрын
Without magnets on the rotor shaft there will be NO TORQUE generated on the shaft. The key to this machine is increasing and decreasing magnetic flux from opposite ends.
@genebollinger18386 ай бұрын
@@ScottFogarty-iv9wt @jaysonsnyder5409 vor 1 Monat The "Argallium Alpha" Alloy is Simply Electroplated AlGa.... Silver plated, Aluminum-Gallium Alloy.... AlGa is brittle and weak, can be greatly strengthened through electroplating with silver. The pores from the rotor in the previous video are results of silica casting the AlGa before electroplating. Machined parts would not be porous.
@unitittii5 ай бұрын
The motor you are working on is a,3 fase? Wat voltage are you working on?
@PeteHerrera-gx4ok6 ай бұрын
Hello, I would use a 3 phase but I need 120 volts.
@ScottFogarty-iv9wt6 ай бұрын
@@ScottFogarty-iv9wt you ever considered the use of a 3 fase controller
@PeteHerrera-gx4ok6 ай бұрын
You have to help it start!
@tinkeringwithmark11864 ай бұрын
if it should work, you should test it with a 3 phase motor. you can achieve overunity only with a 3 phase motor. i dont know why. but for me it works. in a other way.
@danielstiller48105 ай бұрын
I think i seen that before , you start it with 110 and another motor and then once its going if wired right you can back feed the 3 phase one and shut off the drive mother and it will run itself with a free 110v lead to use. the more HP the motor the more power, right. been wanting to give that a try but dont want to fry anything.
@miketheherbguy4 ай бұрын
Hello, we will going to build this, cause we're curious too. But at the Moment not all parts are available. We'll use 3-Phase asynchron Motors 2,2KW and 0,55KW wired in delta at 230V. The Bar will be 3 or 4 parts connected with each other of copper/nickel ore. To init we're going to use direct 230V from the Grid for aprox. 5 seconds than remove. What is the magnetic field of youre magnets, are left N and right N pointing to the center of your Motor? Thx in advance.
@klausschmidt26056 ай бұрын
kzhead.info/sun/hrGBnbCfj4mIZI0/bejne.html
@klausschmidt26056 ай бұрын
Hello, Both sets North facing outward. South facing inward. CAUTION: A comment was made that since the bar is taking the place of the rotor, the bar, if magnetic, will want to rotate (or something) because of the strong magnetic field created in the winding. I don't know if you would even have to go for 5 seconds. I would think that even 1 second would be enough. I wish you Safety Good Luck!
@ScottFogarty-iv9wt6 ай бұрын
@@ScottFogarty-iv9wt Thanks and good luck, too.
@klausschmidt26056 ай бұрын
@@ScottFogarty-iv9wtfrom another device and the LNER in Poland this year, there was some discussion of the Columb roule in that if you compressed two like magnets to a spark gap of a mill then you double the output of the transforma coils, magnetic energy push.
@merlindxb43335 ай бұрын
Your cylinder is still copper. It has to be alloy silver aluminum. They published their video look it up.
@googletropcurieux86706 ай бұрын
Hi. I would try to wire it like in the original Video. Let the middle wiring only be connected to it self , whith a metall bar. Also i would try an alluminum Bar out of its magnetic proporties. It creates probably arotating magnetic field inside the motor. And you are writh there are people how think over that the most time. Sorry for my english,, regards wolfgang
@uelbertunstun44545 ай бұрын
The wireless chargers work on thermal conductivity. The theory is to get the current flow fast enough to cause heat with in the magnetic field. The rod has to remain not magnetic but be super conductive. For a continuous circuit + to - you would have to have the magnets in the same orientation. looking like this N)))S -------- N)))S. Opposing would be N)))S ------ S((((N. Hope this helps some.
@tribalart88235 ай бұрын
Es muss die technische Möglichkeit vorhanden bzw. geben die spulen von Mikrowelle hin und her zu schalten, dabei sollte Mikrowelle spüle jedes umgekehrt mit Strom versorgt werden, damit wird ein Magnet welle einmal S und N bewirkt, somit wurde der Motor durch die Wirbel Magnet Strom erzeugen, um diese zu erreichen wird auch eine große Kondensator benötigt, und wenn dann der Erfolg der Umschaltung auf 50-60 mall die Sekunde ist, kann damit Wechselstrom mit 50-60 Hz erzeugt werden, das mit stab ist nur eine Vortäuschung. Im Decker der oben aufgesetzt wird sollte die Technik sein. Falls andere Erklärung haben können sie auf meiner Darstellung antworten. An allen viel Erfolg, habe es auch gebaut und es geht nicht, wurde aber gehen wenn die Spulen immer wieder automatisch umgeschaltet.
@ercantopal47146 ай бұрын
Hello, Any pictures of your build? Thank you.
@ScottFogarty-iv9wt6 ай бұрын
Hello, I don't know if this is true or not but I'm beginning to think that it is Frequency and Resonance that makes this work. A Frequency would be generated and set by the magnetic field of the motor windings (The Fundamental Frequency) then the other element's (Coils and Bar) Frequencies would be tuned (Harmonically Balanced) to the Fundamental magnetic field frequency by tuning their equally divided frequencies to the Fundamental. - Divided by 2, 4, 8 etc.. They would then Resonate with the Fundamental Frequency (Be resonant to the Fundamental). YOU MIGHT NOT EVEN NEED A BAR!!
@ScottFogarty-iv9wt6 ай бұрын
This makes sense. Resonance would definitely have a multiplying effect.
@stephenross43333 ай бұрын
If my understanding is correct and it is the two or three phase motor MUST be wired in in rotoverter mode and Must be correctly "tuned" with a precise "resonance" capacitor capacity to make it to act as an LC tank on the two drive coils and the other two coils run the non-motor loads. Any combination of motor coils and capacitors. You need a ossiliscope to make the calculations. An easy first build to understand the necessary skills is the rotoverter, that is where I started. THE SILVER DO NOT MATTER. I HAVE MADE MEG RECENTY MOTIONLESS ENERGY GENERATOR WITH 520V @ 63 AMPS EXCESS POWER. if you find a way to contact me I will share this privately. The materials and time are 95% less than what your doing with far greater power. Good luck my friend ,take care
@blakeheimann6 ай бұрын
@Blakeheimann, thank you, like the author I too was getting frustrated, my reason for picking up my pen is my target is 48v so can you advise how to reduce everything to go lower but keep resonance balance 🎉
@merlindxb43335 ай бұрын
Did you try to contact the hispanic guy from the Hidden Technology or The Crazy Channel who is the inventor of The Liberty Engine Project 1, 2 and 3 and also of the bike running with water project? What is his opinion about your work? I also believe that ArgAlium is not the key.
@user-vg1bc2dd7m6 ай бұрын
Hello, It would be amazing to talk with the person who has all the answers. Thank you!
@ScottFogarty-iv9wt6 ай бұрын
He needs to subscribe for premium attention, they will assist him
@elmultimediaschoolofartscu39246 ай бұрын
I am subscribed@@elmultimediaschoolofartscu3924
@ScottFogarty-iv9wt6 ай бұрын
Follow the material specified in the video. Don't replace it with any other spec.
@valdimlajr5 ай бұрын
I think he uses a ferrite core in the generator try to use a big ferrite . If it works, let me know haha 😂😂
@ZCL-Haydro6 ай бұрын
Cut the stainless steel bar half size &leave 2mm space between& join with aluminum peaces with bolts;Split 2mm that bar; thát Is the secret.......
@ppg19005 ай бұрын
liberty has said as much that that its the alu silver alloy that makes all their projects work..
@johnM-Jr5 ай бұрын
My bad. I ment to say use a Gauss Meter to map the flex field.
@user-zm8ul2kt9o4 ай бұрын
нужен статор от однофазного двигателя или все обмотки соединить последовательно - начало - конец ... и попробуйте поставить не феритовые магниты а неодимовые ... они сильнее ... и сердечник в статоре попробуйте заменить на обычный металл ... цветной металл не взаимодействует с магнитным полем ... это как вариант ... желаю вам удвчи ... я сам собрал Liberty 2 ... но у меня напряжение на катушках от трансформатора не поднимается выше 76 вольт ... и то при последовательном подключении на один сердечник ...ю выидимо все дело в количестве провода в первичной обмотке ... онор не по расчету сечения трансформатора ...ю одна обмотка на сердечнике выдает всего лишь 8 вольт ... попробуйте намотать свои катушки по 500 витков проводом 0,8 или 1,0 они явно ставят свои а не от трансформатора ... у родных катушек сопротивление 2-3 ома ... это мало ... посмотрите внимательно ролик с Liberty 2 - там видно что катушки другие - перемотанные и провод тоньше чем у тех что на трансформаторе
@manjeroking5 ай бұрын
Помести внутрь цилиндра немного ртути. Сделай изолированный контакт с одной стороны внутри цилиндра и второй контакт сам цилиндр. Подай напряжение на контакты и ты увидишь как всё заработает ;) Place some mercury inside the cylinder. Make an insulated contact on one side inside the cylinder and a second contact on the cylinder itself. Apply voltage to the contacts and you will see how everything works.
@user-bn2mg2xi3i5 ай бұрын
Thanks for all your effort. As I already mentioned in one of my last comments, the Liberty Engine Team commented already on their own videos (they only answer channel members that pay monthly) that the secret lies within the alloy bar and that they can't reveal the composition yet. Additionally they wrote that without the exact same alloy bar the Liberty Engine would not work. They either had a breaking new discovery with this material that sience can't explain or it is scam. When I watch the video I doubt that somebody would do all this just to deceive people. It would be a masterpiece of deepfake. On the other hand they really earn money with that.
@_LanSolo_6 ай бұрын
I'm curious and I'll check it out
@krismarc66256 ай бұрын
Scam 100%
@smartphone3d6 ай бұрын
OK. Lan Solo . Dar ce compozitie de aliaj secreta , au folosit la primul proiect ? Liberty E .1 . ? Acolo nu am vazut nici un aliaj secret . si totusi functioneaza . ( " Si totusi se misca ! " ) . Explica L.S . fenomenul ! Este real sau fals ? Multumesc !
@eugenantofie94536 ай бұрын
OK. Lan Solo. But what secret alloy composition did they use for the first project? Liberty E .1. ? I didn't see any secret alloy there. and it still works. ("And yet it moves!"). Explain L.S. the phenomenon! Is it real or fake? Thank you !
@eugenantofie94536 ай бұрын
@@eugenantofie9453 Dear Eugen, I found a video on Hidden Technology channel which is run by the same guys that run the Liberty Engine channel. There you can find a video where they say that the LE 1 had a hidden layer of the same alloy under the black tape.. It is all a scam I'm pretty sure now, please convince yourself, you need subtitles, it is in Spanish: kzhead.info/sun/h9yHgMuRaWdnqYU/bejne.htmlsi=5fr72-b9JNYjc7uu
@_LanSolo_6 ай бұрын
try no rod adjust distance between mags
@MrRXR15 ай бұрын
I believe the copper rod or tube is too resistant to the magnetic movement necessary for this circuit to obtain resonance. Check out this KZhead: Copper's Surprising Reaction to Strong Magnets. I remember an image from a patent of a circuit consisting of a ferrite rod with a primary and secondary coil on the rod with magnets at either end of the rod. Supposedly, pulsed DC into the primary compressed the magnetic field of one magnet and stretched the other magnets field causing a rebound effect inducing a greater current in the secondary. This circuit you’re trying to replicate appears to be working with this same principle except with resonance. The copper rod is resisting the resonance.
@johnhenry76806 ай бұрын
Hello, Silver, copper and aluminum all react to the effects of Lenz's law. Silver and copper are very close in their resistance to current flow, copper being only slightly more resistive. In this process of the rod being in resonance, what would it be resonant to and how would it be brought into resonance? What would be the effect of the resonance? I believe it is a "tuning" process and that copper could also be tuned to be resonant to something else in the device. I don't believe that the content only of the metal automatically causes the bar to be in resonance. The result of the resonance in the silver/aluminum alloy might be stronger than the result of the copper bar, but copper could still be brought into resonance. (My belief) Thank you!
@ScottFogarty-iv9wt6 ай бұрын
iyi günler kolaY GELSİN BENDE YAPMAYI DÜŞÜNÜYORDUM SİZİN YAPTIĞINIZIDA İZLEDİM ÇALIŞMADI YANLIŞ BİRŞEYMİ YOPTIM DİYE SORMUŞTUNUZ BENİM GÖRDÜĞÜM KADARIYLA MİKRO DALGA TRAFOSUNU KAYNAK YERİNDEN AYIRMAMIŞSINIZ ONDAN OLABİLİRMİ? BİRDE MOTOR TRIFAZE MOTOR SİZİNKİ MONOFAZE KOLAY GELSİN
@turansusuz946 ай бұрын
The bar is silver&aluminum
@srtfourtom2 ай бұрын
I hope you get some info so you can move forward 😌👍
@brutallyhonest92186 ай бұрын
Thank you.
@ScottFogarty-iv9wt6 ай бұрын
Některé MOT jsou s tepelnou pojistkou a proto tam jsou 3 vývody,podle videa vidím jeden vývod cívky nepřipojen,některé MOT mají dva vývody a tam problém s připojením není. Asi bych sundal festony a proměřil jestli mají cívky MOT obvod. Na svorkovnici motoru bych vrátil zapojení z předchozího videa, ale ještě to překontroluju 👍
@user-fz2rr9dt8z6 ай бұрын
Hello, Thank you for noticing that. That would make a difference with everything I build using that type of coil. I already have the "festoon" off and am designing something new for all those coils I have. I've never heard the word festoon before, Thank you again. Please stay in touch.
@ScottFogarty-iv9wt6 ай бұрын
faston - konektor spojka, fandím vaší práci a budu rád,když se dílo povede,ještě se ozvu ohledně motoru,až to celé zkontroluju@@ScottFogarty-iv9wt
@user-fz2rr9dt8z6 ай бұрын
Hello, Thank you very much.@@user-fz2rr9dt8z
@ScottFogarty-iv9wt6 ай бұрын
The coils are connected right at this point and the two wires inside of the motor connect them to each other and what happens
@carltonwizzle14206 ай бұрын
Screaming at the top of my lungs, saying that ive cracked it and yet, im ignored. Perfect 🤦♂️, my lips are sealed.
@McFlysGaming6 ай бұрын
Hello, Why would you not want to share it?
@ScottFogarty-iv9wt6 ай бұрын
@ScottFogarty-iv9wt I do, but the problem is. The element is not silver. It's a silvery type of element, and there is only so much of it.
@McFlysGaming6 ай бұрын
Gallium?@@McFlysGaming
@ScottFogarty-iv9wt6 ай бұрын
@ScottFogarty-iv9wt no, but it's part of it. It took me 5 months to figure out the elements. I just need to figure out how much of each element to mix.
@McFlysGaming6 ай бұрын
@@ScottFogarty-iv9wt look for rare military use elements. Non radioactive
@McFlysGaming6 ай бұрын
You have mounred the components on wood. The original was mounted on a steel base.
@colinnesbitt70933 ай бұрын
Hello, Thank you.
@ScottFogarty-iv9wt3 ай бұрын
Isn’t that how we learn?
@ScottFogarty-iv9wt5 ай бұрын
Silver alluminum bar
@macedestruction46015 ай бұрын
The one video that allegedly madeit work used silver aluminum alloy bar
@jackschaefer94055 ай бұрын
It is NOT current through the bar but is MAGNETIC FLUX caused by a DIFFERENCE in flux magnitude. A soft iron core of the SAME metal as the microwave transformer material. You are doing a great job. Don't be discouraged. You need non carbon steel. Edison found 10,000 way that a lightbulb WON'T work. The bar is only PART f the key. I am working on the 1908 patent of Clemente Figuera that also works on variable strenght of magnetic flux. I have been learning for over 10 years and the gaining of knowledge is logrithmic. The more you learn the FASTER you learn. I'm 76 yearof age and learning every day. I encourage you not to give up. I'm in Arkansas.
@genebollinger18386 ай бұрын
The permanent magnets are all N--S and the magnetic FLUX flows OUT of the N pole and goes in varying lines of flux back to go INTO the S pole. There is what is called a bloc wall in the center of the length of the magnet where there is NO magnetism. Start your set up with ONLY the permanent magnets facing each other N pole to N pole and the soft iron or silicon iron connector rod between them. Do NOT have the motor coils and housing covering the rod. Use a sheet of Plexiglas to set over the rod and put iron shavings on the Plexiglas near the center of the rod. Now pull the permanent magnets AWAY from either end and the magnetic flux should move AWAY from the end that still has the magnets attached. This experiment will tell you if you have the right material for the rod. When you put the magnets back on, the shavings should be pushed back to the center. Then remove the magnets from the OTHER end and the shavings should go opposite of before. This is the FLUX movement that the device has to have when the transformer electro magnets CANCEL the flux at one end but ADD to the flux at the OTHER end. You can do this by charging the coil at one end with a 12 volt battery with positive going in on one coil while having it negative on the other coil. The iron shavings should go all the way to the end away from the positive charge. Then reverse the leads and they move to the other end. Now you are ready to complete the device. NOW for the MAGIC. When the motor housing with the coils is placed over the rod between the transformers, the transformers should be hooked in series with the connections opposite just like the battery was connected. Now when the synchronous motor is connected and turned, the charge SHOULD activate the transformer coil on one end to push the flux and the other end to nullify the permanent magnet flux causing an electrical current to be formed in the motor windings that will now REVERSE the flow so the the ends switch and the FLUX moves to the opposite direction. The device should now be running with NO movement or noise except for the oscillating flux creating electrical current..
@genebollinger18386 ай бұрын
The electrical current will have VOLTAGE but no AMPS until a load is applied to the device. Then current will flow through the load doing work. The electrons moving through the wires will then RETURN to the Liberty Engine device in the opposite electron flow with no loss of electrons.
@genebollinger18385 ай бұрын
Scott, did you test run your motor before you took the rotor out to be certain the it was wired correctly? Then the only wires you need to remove is the supply wire from the wall socket and replace it with the pigtail row of sockets with the off-on switch. Then the two wires that go to the coils on the transformer cores are connected with positives to the outside poles and both negative wires in the center. If the device does not fire up when charged up with the synchronous motor then reverse the wire connections on ONE end at the transformer coil. The transformers should be charging up at the SAME TIME and the forces should be in the SAME direction. This nullifies the permanent magnet forces at one end and doubles the flux strength from the opposite end. That flux can now push all the way through the transformer core that is nullified and come BACK through the motor core and copper coils to the end of origin and continue this circuit for 1/120 of a second before reversing caused by the current that has JUST been created by that magnetic flux flow. The device is NOW self running. CONGRATULATIONS!!! YOU ARE A MAGICIAN!!
@genebollinger18385 ай бұрын
Neodymium magnet
@user-zf1eg8iy2n6 ай бұрын
Eles falaram que essa barra é feita de alumínio e prata, ela não é condutiva de energia.
@REGINALDO3695 ай бұрын
SCOTT, there is a FULL SET of 10 books of Hawkins ELECTRICAL GUIDE for 99 dollars and 8 for shipping @ 6am 11/28 Hope you can get them. Gene
@genebollinger18385 ай бұрын
SCOTT, I'm going to take the time to document what I believe is the complete workings of the LIBERTY ENGINE. The first thing is the material for the center rod that connects the two transformer coils. This material should be a very soft annealed iron core that is smooth and round and one inch longer than the distance between the outside ends of the copper motor coils such that when installed inside the motor coils there is 1/2 inch clearance between the outside wings of each of the transformer cores. When everything is assembled, the transformer coils should be facing each other and double sided taped to deepest part of the center of the E transformer cores. The permanent magnets pairs should be tested for N and S and should be attached with their own magnetism ( NOT GLUED) to the far outside of the transformer cores with their N poles FACING so as to repel each other. This causes the magnetic flux fields of BOTH magnets to flow to the center of the length of the rod. These opposing flux fields then turn 90 degrees OUT of the center rod along the rod toward BOTH ends and back to the S end of BOTH pairs of permanent magnets and into those magnets. As long as the magnet pairs are attached, this flux flow will be active. NOW if ONE pair of magnets is REMOVED, the flux flow from the end with magnets attached will flow though the length of the rod and into the center leg of the E transformer coil and around and out of both of the wings and through the copper coil loops and through the iron core of the motor and continues through the copper coils again on the opposite end of the motor and into the wings of the transformer and BACK into the S pole of the magnets. THIS action has caused an electrical charge to flow in the copper wire in one direction as the first part of an AC current. The opposite flow in the the copper wire occurs when the magnet positions are reversed and that would COMPLETE the AC cycle. THIS is the effect that takes place when both electromagnet are charged in the SAME direction. One pair of permanent magnets are canceled by the flux of the electromagnet facing in opposition, as though they were REMOVED. Then the electromagnet at the opposite end ADDS to the flux of those permanent magnets such that a STRONG flux flow in the SAME manner as before and the flow through the copper coils is now sufficient to create a strong electrical current that is one part of the 120 v AC. When THIS current is generated, it causes the electromagnets to be charged in the opposite direction, causing the flux to flow in the opposite direction and the copper coils will be charged in the opposite direction such that the rest of the AC cycle is complete. THIS causes the electromagnets to reverse charge and the cycling continues. With the correct wiring to the motor coils, the output can go to the cord for lights, fan, etc. and the wires to the transformer coils are wired in parallel such that they charge 90 degrees lag to the AC current. Once the device is started with the small synchronous motor, it can ONLY BE STOPPED by removing one pair of permanent magnets. THE NUMBER of copper coils in the motor SHOULD be wired in such manner that the current necessary to RUN the motor will be the SAME current as the output.
@genebollinger18385 ай бұрын
Interesting, my comment was deleted. Why?
@McFlysGaming6 ай бұрын
nemáš dobře zapojené trafa,jeden vývod vinutí máš nezapojený na obou trafech ,musíš propojit krajní s fastonem
@user-fz2rr9dt8z6 ай бұрын
Thank you.
@ScottFogarty-iv9wt6 ай бұрын
Согласен с коллегой! Поскольку двигатель 3х фазный , включение МОТ-в началами на обмотки А и С, концы на обмотку В!
@user-ey9dc9tv8e6 ай бұрын
I do this building..but not work..i use a rod in steel..same like this..cannot out of power
@user-eh2yr6qu8u6 ай бұрын
Use camera treak
@ARIELFBLOGS5 ай бұрын
If you take a look at the Newman patent, it might take you in a totally different direction in your work. I looked at the liberty engine as well. As many of the videos on YT, it just doesn't make any sense other than to waste your time trying to make the bar out of unobtainium or whatever they want you to believe. The composition of the metal doesn't seem to be the deal they are making it out to be unless you want views and channel members.
@theclintified4 ай бұрын
Have you tried ferrite. its none magnetic? Cores are made from silicon-steel or ferrite for magnetic flux organization. That's why alum-silver makes no sense.
@user-zm8ul2kt9o4 ай бұрын
kamu bisa menggunakan listrik rumah untuk memulainya lalu lihat berapa teganggan yang berputar di sana
@ahmadfadhillah62435 ай бұрын
cívka MOT má 3 vývody a dva konce vinutí,jeden je na festonu a druhý na festonu není,musí se udělat klema mezi vývodem cívky a festonem,není tam obvod
@user-fz2rr9dt8z6 ай бұрын
Hello, I never noticed that! This is the way 120 volt MOT coils come right out of the microwave. Did the ones in the video also have to be modified? Thank you!
@ScottFogarty-iv9wt6 ай бұрын
この装置簡単に駆動できます。
@k59824 ай бұрын
I stop to
@josephkomezusenge32996 ай бұрын
I hope i haven't overloaded your brain with all this but there IS still a LOT to be shared to get this thing built. I wish there was a SAFE way to comunicate directly because THIS is going WW.
@genebollinger18385 ай бұрын
Hello Gene, I am learning lot but I feel like I am reinventing something. Maybe that's how it needs to be. I'm wondering if a finished replication of #3 will look or operate anything like the one presented in the video. Many of the comments are confusing and conflicting. It feels though like most people want to help. My main concern at this moment is whether to keep the asynchronous, single phase, 120 volt motor or reconfigure with an asynchronous, 3 phase, 230 volt and step it down somehow to operate 120 volt devices. I have both motors but I don't have the 230 volt transformer cores or coils. First things first? Thanks so much!
@ScottFogarty-iv9wt5 ай бұрын
Scott, because we in the USA are not on 50 Hz with 230 v , which is the rest of the world, in a sense you are NOT building exactly what Liberty did and in that sense you are a Pioneer. The PRINCIPLE should be the same, but some details have to be discovered. One of the things that I have discovered since working on this with you is the squeezing effect of the magnetic flux at the end with the electromagnet opposing the permanent magnets. The electro magnetic MUST be the EXACT strength as the stacked permanent magnets to EXACTLY cancel the MOVEMENT of the flux. What THIS does is force ALL the magnetic flux field to separate and follow the path of least resistance which is OUT the 2 wings that are on the outside of the transformer core. That combined FLUX combines WITH the COMBINED FLUX from the OTHER end so that ALL THE FLUX from the four permanent magnets AND the flux from BOTH the electromagnets are COMBINED to flow THROUGH the copper coils and soft iron core holding them, to create a moving flux field through EVERY turn of copper wire on BOTH ends of the housing. Each end is in the opposite direction of the other regarding current flow. It is NOT the flux moving through the BAR, but it is the flux moving through the coils of copper that creates an electrical current. That current lags the flux movement by 90 degrees and THIS current REVERSES the electron flow through the coils of the electromagnets and reverses the flux flow so that the moving flux now flows into the copper coils from the opposite direction causing the current created to flow in the opposite direction finishing the sine wave of ONE Hz of 60 cycles per second. I HOPE I have explained this well enough for you to diagram it on your computer and share in a video. Hope this helps. Gene
@genebollinger18385 ай бұрын
Hi Gene, Great Explanation! So the bar organizes the magnetic flux from the windings (the more efficient the bar is the more magnetic flux available), creates a path both ways to the magnetically balanced cores, the magnets force the flux to the sides of the core (wings & least resistance), then into the coper coils where the coils generate the electrical current back to the motor windings and to the strip that awaits loads to be connected to it and then the balanced cycle repeats itself?.@@genebollinger1838
@ScottFogarty-iv9wt5 ай бұрын
That is the way I understand it. I have one transformer core and 2 magnets and very low magnetinzing silicone steel core material that I got as samples that are from a company that MAKES the transformer cores. I also have a home built machine that can divide 12V DC into two separate streams where one is at full 12v and the other is at 1.5v and then where they are less and more-- then equal-- then more and less-- then 1.5v and the opposite end 12v DC. I can turn this cycling down to as little as 2 cycles per second. With a sheet of Plexiglas plastic and steel filings, I can actually SEE the flux PATTERN and MOVEMENT. This is what MOST people can't SEE but I CAN see. The 12 v DC is 1/10 the value of 120 v AC. The device has a variable speed DC motor so I can then speed it up to 60 Hz and see the final pattern. Where are you located? Is there a safe way we can communicate besides all this typing? I am in Arkansas. Just threw that in there for thought. What I am not certain of is how to perfectly balance the changing flux but if the magnets are identical and the transformer coils are also identical, and the coils in the motor windings are equal in N and S windings then it seems reasonable that both sides of the fluctuating pulses of flux should be equal and opposite. As for the small synchronous motor that starts the process, I noticed that when you tried to fire it up that the reading went to over 500 volts AC. You also said it will shock you. That indicates to me that the core is NOT carrying the magnetic flux as it should or the voltage would stay around 120v AC. There is too much resistance of flux flow through the rod. DID YOU get the information about the 2 books on ebay on magnetism and electricity??😢
@genebollinger18385 ай бұрын
Hi Gene, that was only 50 volts on the meter. Don't touch the connections to the synchronous motor. That's when I got the shock. If you're using DC how about Buck converters with split source then combine. Are you thinking DC with this #3, then rectification? We do need to find a better way to communicate
@ScottFogarty-iv9wt5 ай бұрын
three things must be synchronized length of bar and speed of sound in this bar which depend on its material and the frequency of magnetic field
@ashrafatteya6 ай бұрын
Hello, So resonant to each other? Is the frequency of the magnetic field the fundamental? If this is true, it seems like other materials could be adjusted to be in resonance. Thank you
@ScottFogarty-iv9wt6 ай бұрын
yes but there is mor information like magnetostrictive of this material and other.....
@ashrafatteya6 ай бұрын
Hello, I'm ready for more helpful information Thank you.@@ashrafatteya
@ScottFogarty-iv9wt6 ай бұрын
That is too difficult to find aluminium silver bar
@CaraKayaRaya4 ай бұрын
“THINK ABOUT ‘doping’. SILICON WAFERS are doped to enhance lattice structure for layered application. I LOOKED at AL-AG alloyed composition based on given properties. SPECIFIC GRAVITY of AL is greater than bar alloy. MG IS commonly used with AL & would decrease SG. A THIRD element contributes a desired property & it is one that decreases SG. CONSIDERING FARADAY’S early experiments, I think bar function is to advantageously alter typical, magnetic field. THINK ABOUT what field does without any bar & then about what it does with copper. NEW ALLOY must alter field significantly but how? IS POSSIBLE an alloy has a property that doesn’t allow magnetic ‘alignment’. IT’S RESPONSIVE to magnetic induction but when in a field, it never becomes statically aligned. SUCH A property could perpetuate field oscillation. IS POSSIBLE an element exhibits property & is quite valuable. AL & AG are used to add properties, obfuscate & to hide it. IF FIELD oscillation is problem, then you can add a coil around your CU bar & connect it to pulsed DC. YOU SHOULD see oscillation. I WOULD look at trying neodymium or FE as third element. IT’S NOT likely to be CU (that has ‘susceptance’ to magnetic field) but I think it must be an element that can become ‘magnetically aligned’, unless in a lattice structure with AG & AL. LIKE A silicon wafer, a lattice with ‘unstable susceptance’ might benefit from a consistent pattern of holes, that decrease SG. IT SHOULD almost become magnetically aligned. IT MIGHT be a property discovered in quantum research, whereby atoms at opposite end are strangely ‘pseudo-paired’. DESIRABLE MATERIAL would ‘reverberate’ magnetically; ringing.” 😐
@charleso0o0o6 ай бұрын
you did not show to run it
@afaqibrahim15806 ай бұрын
I swear on my testicles its real, be persistent it'll come meditate on it!
@blakeheimann6 ай бұрын
You don't have to do that! 🤣 I believe it's true too. I'm hanging in there. We'll see.Thank you!
@ScottFogarty-iv9wt6 ай бұрын
Saya sangat antusias dengan usaha anda,dan tetap menunggu hasil yang akan anda dapatkan. Dan sepertinya anda menerima beberapa saran dari beberapa orang yang memberikan komentar dan saran pada anda,saya melihat anda lebih memperpendek batang yang berada di tengah,dan mungkin anda sudah mengetahui beberapa perubahan yang terjadi,semoga anda berhasil !!!
@mekanik_ndeso9116 ай бұрын
Thank you!
@ScottFogarty-iv9wt6 ай бұрын
Wlc bck brooo
@imadgerges29336 ай бұрын
Thanks
@ScottFogarty-iv9wt6 ай бұрын
I TEXT YOU 2 TIME,BARR IS ARGALIUM=SILVER, GALIUM,ALUMINIUM ALIAGE.
@valerianchisoi33056 ай бұрын
May be he cannot read yohr comment...please write in arabic may be he can understand...😂😂😂
@fahlazad5 ай бұрын
If it was real, KZhead wouldn't let you see it.
@AnonYmous-dp4by6 ай бұрын
Nah
@ricebastard5 ай бұрын
Io o osservato bene ogni dettaglio di questi ragazzo ma sto guardando anche il tu ma mi sembra che hai collegato i cavi sbagliato none come a fato il ragazzo e non posso dire se vero ne anche falso dovrei provare a costruire uno poi dovrei dire se falso
@69zane6 ай бұрын
The roller must be pisoelectric. Electric charges are induced on this material, or more precisely on its surface. The motor must be 3 phase, more rotating magnetic fields.
@MrKorba.6 ай бұрын
you will not find any 120Volt in 3 phase it's only 1 phase . I will try that project with a 230volt 60hz 3 phase it's just miss me the micro onde transformers. I know that's be so frustrating to build that project when it's not working. I am sure that you will found the answer. Maybe they not tell all the true but i know for sure they not build theirs project for nothing !
@57templiers6 ай бұрын
Hello, Please keep me posted Good luck on your build!
@ScottFogarty-iv9wt6 ай бұрын
Пожалуйста переведите на русский язык.
@holmurodabdulloev-tw5om3 ай бұрын
The small synchronous motor ONLY has to be turned for 1/120 th of a second to get the pulse needed to start the device. The bar has GOT to be the same material as the transformer cores. I DO think about this kind of devices ALL THE TIME. Three o'clock in the night is download time from the HOLY SPIRIT. Keep praying for understanding and wisdom. And read what I have sent you because IT is valid and true.
@genebollinger18385 ай бұрын
Hi Gene, Thank you so much for your information. It’s very enlightening! I have to study and understand it. In no way am I trying to be a smart ass or claim to know more than you (because I can tell that I don’t) I’m just trying to get additional clarification. Any claims here are based on my understandings. I’m about to go down a different rabbit hole so I have a few questions: I have to be able to draw this principle on paper (computer). That’s the way I learn and remember. * Knowing that 120 volts are needed, 3 phase or single phase? Or alternator windings? I also have a Cantoni Group #12155995 .75 HP, 3 phase, asynchronous motor similar to the one used for #2 motor/generator. I’ve been told that it won’t work for 120 volts. * The bar: A single material? Could it be made a larger diameter to reach the outer windings more? * What would be the ideal composition of the bar from center to outside? I can see how the bar could be manufactured based on my recent views. * It seems that a material that is able to be magnetized will have torque on it and will want to turn in a revolving magnetic field. Even silver, copper and aluminum will want to turn. (Lenz’s Law). (My understanding) * The voltage without amps is a tough one for me V = IR Voltage = Current x Resistance These are not the only questions I have. Thank you!
@ScottFogarty-iv9wt5 ай бұрын
@@ScottFogarty-iv9wt Thank you for your response. I have a great deal ofactual build experience in fluctuating magnetic flux fields. A single phase motor is best for what you are building but should be a brushless asynchronous 120 v AC sometime called an induction motor. The voltage without current is exactly like the wall plug in your house. Put the leads of your voltmeter into the socket and it reads 12 volts AC. Yet there is NO current flowing until you PLUG something in that is drawing current and work is being done. The electrons are flowing from the positive wire through the work and back through the white wire and back to the wall socket. But those electrons go BACK to the TRANSFORMER on the pole outside but DOES NOT go back to the power station but returns BACK to the house again. The power station only sets the 60 Hz rate that the electrons move. These are the only two questions that I remember from your reply. I will go back writr down all your questions and answer ALL your questions AND ANY other ones you have to get this device to be successful. As soon as I saw this device about a week ago I knew how it works because of the hands on work I have been doing. I have made a home built machine with a variable speed motor that puts 12 v DC through a commutaror with 32 poles so that I can make current from 1.5 v DC up to 12 v DC and a second current 180 degrees opposed so I can watch the flux move at as slow as 2 cycles per second. I used a Plexiglas sheet with iron filings to watch the flux change. I will send you more info soon as I know how important it is for you. Here is to your success. Gene
@genebollinger18385 ай бұрын
There are a series of books copy righted in 1917 called HAWKINS ELECTRICAL GUIDE with 10 books that is in a question and answer format that is VERY easy to understand. There was a FULL set of 10 on ebay 5 days ago for about $160 plus shipping. WELL worth it for complete knowledge of what you are building. The rod through the device should be ALL the same material and according to Hawkins Guide is VERY SOFT annealed iron and I would also add that it needs to be thin laminations and round so there are NO sharp edges. Sharp edges cause flux leakage and eddy currents which are counter productive to flux flow. The bar diameter needs to be the same diameter as the HOLE in the permanent magnets. When the permanent magnets are by themselves, the flux comes OUT of North and goes around and back IN the South. Be certain that these magnets are CORRECTLY MARKED. N to N repulsion is about twice as strong as the S to S repulsion. Very important in this build. Place the two pairs of permanent magnets on the ends of the transformer cores. They SHOULD cause the transformer cores to repell each other. Set the transformer cores with the low voltage ( 110 v) coils in place. Use a 12v DC battery and leads to connect the terminals of the coils at both ends in parallel Positive and Negative to charge the coils. What has to be determined is that while the Left end coils ADD to the permanent magnets N pole and the other end the charged coil opposes the N pole of those magnets and completely cancels the N pole flux. Then when the current changes direction the exact opposite takes place and all the strong flux is on the other end. There is NO interaction between the outer copper coils and the center rod due to the AIR gap of nearly 2 inches. VIRTUALLY ALL of the flux stays within the center iron core and the OUTER core of the motor stator coils. It is THESE coils that charge with the moving magnetic field flux that is RETURNING back to THE STRONG charged end and is moving perpendicular to the copper wire that is on both ends of the motor housing. On page 124 of the Hawkins Guide it says that there is approximately 28 pounds of energy is converted to heat in making a double reversal of STRONG magnetization in one cubic foot of iron. Are you familiar with what is called a tank circuit? That is two circuits that are MATCHED is such a way that as one circuit is charging up the other is discharging down and then the induction of the first causes the second to charge up while the first discharges down. This is what we are creating. Most of the time there is an induction coil and capacitor in the circuit. This is using the energy stored in 2 separate but equal INDUCTION CIRCUITS.
@genebollinger18385 ай бұрын
Alternator windings may be a possibility in future builds but an alternator is a 3 phase circuit that has brushes and is rectified with heavy diodes to get a 12 v DC output. That becomes more complicated than a FIRST try. Once we understand EXACTLY how this works we will conquer 220 v AC in two opposing 110 v AC circuits 180 degrees out of phase with a ground between to give us a DEVICE able to run a house with NO POWER COMPANY.
@genebollinger18385 ай бұрын
THAT wall plug comment should have said 120 v AC not 12. Typing is a VERY difficult way to communicate!
@genebollinger18385 ай бұрын
ah man sorry i feel your frustration, but i`ll be honest with you, you are being too naive for all this... there is specific science behind that and first you have to understand the concepts before being involved as you would get frustrated, in general you are trying the one that is impossible, because the special alloy bar is not supposed to be conductive, you need to understand there are different properties of electricity at different frequencies it operates, what the bar does is something you need complicated setup to get otherwise, it makes it resonate in a way and the electromagnets amplify it, so the resonance wave passing through the coil generates movement of the electrons inside the wide.... If youd ask me try to build the 1version of liberty engine, it would be much easier to learn and get into it without much frustration as there is no special alloy its the old school way
@MrBademy6 ай бұрын
There are already a lot of people who tried the first version without success on KZhead. I even tried it myself.
@_LanSolo_6 ай бұрын
@@_LanSolo_ i tryed myself too and failed, but then i found a dude on utub from nigeria, he wanted 2500$ and i payed him, he explained me how to do the wiring, basically its important to phase shift one of the 3phases of the generator, this way with bridge rectifier connected to battery and then with again some wierd wiring powering a DC motor as prime mover with higher hz electricity and its cold, it doesnt get warm i put it to different generators, and i managed to get 220v.... i just now need to get a supercapacitor and a bigger battery, then i can loop it over on its own
@MrBademy6 ай бұрын
@@_LanSolo_yes liberty engine 1 and 2 no one was able to replicate, and they say several lies in the path, first that was the shape of the magnet, later that was a secret alloy. Look like scam, smell as scam, is an ...
@BienestarMutuo6 ай бұрын
@@_LanSolo_ Because they are FAKE. I too wasted my precious time with their deceptive and Hidden "wire" Technology's.
@MehmetBoysal6 ай бұрын
Look at the frekvens 50,0 hz hov is it posible Ho ho time for Christmas
@bjarnelarsen75756 ай бұрын
Electricity won’t produced without a constant movement between the coil and magnet. The guy with the masked face from other video is nothing but a deceiver who tried to get 5M views. Don’t waste your time, energy, and money on something that goes against physics.
@viperMuntasser4 ай бұрын
Ha. It seems much easier to bring this thing to work... kzhead.info/sun/arp7mLNolpuirKs/bejne.html Sadly it's all fake I fear. I never get this Motor Version #1 und Version #3 runnig. Wasted only a HUGE amount of time.
@jrgjurgenson35403 ай бұрын
😮 it's fake bud. I been building pulse motors for years. And it's very addicting. Search 4 ft 120 lb 320 magnet pulse motor. See you in the rabbit hole my friend. Lost my mom 7 years ago.🎉🎉
@pulsedmotor6 ай бұрын
Hello, Thank you. Sorry to hear about your Mom. It's tough. I think I've come across a picture of that. I'll check it out. I followed Mike Kantz at Quantamagnetics for quite a few years. He did great work. He would have loved this stuff. I've built a few myself. You and I both know that over unity is real. Easily. But what is happening is a loss of confidence by the people who were beginning to open their minds to the possibilities after being told to that there is no such thing as perpetual motion or you can't break the rules of thermal dynamics. Those responses were programed into people's minds over the years while progress was being made by people who wanted to share it. These secrets are not good for progress. (I'm sure you already know this) Thanks again!
@ScottFogarty-iv9wt6 ай бұрын
Scott, the over unity was explained to me by the example of a glass of water. You can't get more water out of the glass than what YOU put in. That is Lenz law. But if you put the glass at an angle under a running faucet, then you can get an unlimited amount of water. THAT is the Limitless LAW. The atmosphere has enough excess electrons in a coffee cup volume to boil all the oceans of the earth dry if it was harnessed correctly. WHEN we harness this dilemma, we will NEVER have a shortage of supply. EVERY electron that is taken FROM the EITHER goes BACK to the EITHER.
@genebollinger18385 ай бұрын
Gerçeklikle hiç alakası olmayan deney. Üç kuruş gelir elde edeceğim diye bu tür deneylerden vazgeç geçin.
@bekirbol5413 ай бұрын
This whole of taking a generator apart and reconfiguring it to try to do the same thing is the key to being fake. Why not just spin the damn thing with something reliable. My 3 attempts to explain was divided by a nights rest when it came to me! This is fake, but most of all unnecessary.
@user-zm8ul2kt9o4 ай бұрын
Tu critique sans avoir construit... franchement T nulle
@philippebertel17793 ай бұрын
I wish that I understood French, I would love to keep this conversation going in all languages. This is the best way to solve any problem, by having people look at this wonderful problem from different angles. Once we find the best way to absorb the flux field and direct it to where we want it to go without the turbulence that will turn the energy in to heat. We may need additional elements such as Iridium and Gallium so as to work more like a superconductor. But you then need to cool the core by adding a cooling chamber (drilled hole threw the core with fittings and pump liquid nitrogen to control it's temperature. Just thinking.@@philippebertel1779
@user-zm8ul2kt9o2 ай бұрын
Не мучился это не работает..... Фейк.
@edvardlunin47096 ай бұрын
"If they respect you, respect them. If they disrespect you, still respect them. Don't allow the actions of others to decrease your good manners, because you represent yourself, not others". And I would add: (But don't trust them). Would you care to share any pictures of your work? Thank you.
@ScottFogarty-iv9wt6 ай бұрын
@@ScottFogarty-iv9wt Dear Scott I appreciate your work but let me tell you one thing: The same guys from Liberty Engine Team are running another channel called hidden technology, there they upload 100% scam videos. Please convince yourself: kzhead.info/sun/od5rf8iJoHmPnmg/bejne.htmlsi=7JYTRGhCY3QKZjC6
@_LanSolo_6 ай бұрын
Look up gerard morin hes onto a large part of this equation
@christopherparis68416 ай бұрын
Devi mettere in un crogiolo e fondere queste percentuali: il cilindro 65% Argento 10% Alluminio 10% Nichel 10% Cobalto 5% Silicio in questo modo funziona....La barra di rame non funziona.....io ho fatto la fusione e tornito il cilindro e funziona perfettamente!!!! 😉 Inoltre il collegamento superiore alla scatola è Sbagliato....😂😂😂😂😂
@Lilin...Calabria6 ай бұрын
Look like a good recipe, someone else can confirm this?
@BienestarMutuo6 ай бұрын
Quanto ti è costato fare la barra?
@ErmannoMaselli6 ай бұрын
@@ErmannoMaselli ho il crogiolo fatto da solo totale 80 euro
@Lilin...Calabria6 ай бұрын
@@Lilin...Calabria If that work, you can produce and provide that bar for us in europe?, How much? replication by a third party is needed to ensure that you have the right mix.
@BienestarMutuo6 ай бұрын
Se funziona, possono produrre e fornirci quella barra in Europa, a quanto ammonta, e avete bisogno di una replica da parte di terzi per essere sicuri di avere la giusta miscela?
@BienestarMutuo6 ай бұрын
Its beeting ya up cause you dove into things n didnt learn enough of components first.....look at how you hook up a 3phase motor at home when u only have 2 phase available.....thats a huge huge huge aspect of understanding the difference if phases and youll need to learn differences in brushless dc motors reg dc motors and ac motors and bridge diaodes and capacitors
@christopherparis68416 ай бұрын
Absolutly you need a magic powder or a skilled wizzard. 😂 This will never ever work. Forget it... Or... You can go back to school, but do not sleep on physics lessons, then you will realize again that it will never work. 😂 Trying to ne positive? 😂 Come on... Scrap it... It will never work...
Keep it up.. Great job😊😊😊
Hello Joe, Thank you.
Great attempt Sir. Please take note of the following: Change the central rod to iron. It seems you used copper which is not a ferromagnetic material. Iron is a good one and would conduct the magnetic field generated by the excited motor to your polar coils. After you have changed the core rod to iron with increased diameter, you will need to excite the motor coil with external AC for it to start working. You are almost there. Don't give up. Thank you.
Yes I agree, Ferrite is the most preferred.
Could you also start with an AC capacitor, for example 30 uF? How can you stop the magnetic field and short-circuit it again?
Please do not stop I am looking at building #2 I have a motor. I am going to build a frame for it soon.
Hello, I'm not planning on stopping anytime soon. Please keep us posted on your progress. Good luck on your build. Thank you.
Try Alloy bar and you're good to go, I'm with you all the way I'd love to see you finish it don't give just yet.
Thank you!
Das Gerät funktioniert zwingend nur mit der Original Aluminium-Silberlegierung die für das Original verwendet wird. Das wird in einen 2. Video extra nochmals von den Konstrukteuren des Originals gesagt, das der Selbstbau erfolglos ist ohne dieser Legierung. Diese Legierung wurde im Modell 2 für den Rotor und im Modell 1 für die umgebaute Lichtmaschine auch verwendet, auch das wurde in nachfolgenden Videos offen gelegt. Diese Legierung ist nach ihren Aussagen patentrechtlich geschützt und wurde ursprünglich für eine andere Anwendung entwickelt. Sie ist sehr schwer herzustellen und nicht frei käuflich zu erwerben, sondern nur für ganz spezielle Anwendungen entwickelt, sie können sie auch nicht in größeren Mengen beziehen. Die Ursache warum das nur mit dieser Legierung funktioniert liegt im Aufbau des Atomaren Gitters der Legierung, das wegen der extremen Verschiedenheit der Metalle ein ganz besonderes ist, denn es kann in die Quantenfluktuation eingreifen, indem diese Struktur des Atomgitters eine Potentialdifferenz im isotropen Quantenfeld bewirkt, die dann um sich wieder Auszugleichen einen Stromfluss in diesen Metall generiert. Aber dieser Zustand wird nur mit den Zusammenwirken mit den Magneten und den Spulen und der Anordnung als Schwingkreis erreicht, dagegen wird in der Maschine Nr, 1 und 2 keine Schwingkreiskonfiguration gewählt, darum ist dort ein Rotor nötig. Vergleichbar ist das mit einen Wellenkraftwerk als Modell. Der Wind erzeugt die Wellen auf den Wasser ( die Quantenfluktuation ), mit denen kann ich ohne spezielle Konstruktion keinen Strom gewinnen, baut man aber einen schräg auflaufenden Damm, so können die oberen Teile der Welle in das eingedämmte Becken strömen ( Der Damm ist das besondere Atomgitter ), bei jeder Welle der Wellenberg, so erhöht sich der Wasserstand im Becken gegenüber der See ( Auf der einen Seite des Atomgitters sind einige Teilchen mehr vorhanden, anscheinend Elektronen ), diesen kann ich dann über ein Rohrsystem ( Der Stab mit Resonanzmaß ) mit Turbine abfließen lassen und das Potentialgefälle durch den erhöhten Wasserstand treibt dann die Turbine an und der angeschlossene Generator erzeugt Strom nach den regeln der Physik ( Im Stab erzeugt der Strom ein Magnetfeld, dieses Induziert eine Spannung in den Spulen). Genau diesen Damm stellt die Struktur dieser Legierung für die Quantenfluktuation dar, sie erzeugt das " Gefälle " und das wird durch Elektronenfluss ausgeglichen und die Anordnung als Schwingkreis bedeutet nur das der Damm bei 50 Hz 50 mal je Sekunde um 180° gedreht wird so das sich die Stromrichtung ebenfalls 50 mal je Sekunde um 180 ° dreht und somit in den Spulen einen Wechselstrom von 50 Hz induziert. Die Abmessungen des Stabes, die Induktivität der Spulen und die Magnetkraft der Magnete haben die Eigenfrequenz von 50 Hz, damit liegt Resonanz vor und somit eine Verstärkung des Effektes. Da die Magnete und die Spulen aus einer 230 Volt Maschine stammen musste nur die Stablänge bei verschiedenen Stabdicken berechnet werden, das geht nach der Formel der Berechnung eines Dipols beim Antennenbau. Damit funktioniert diese Maschine nur wenn diese Parameter eingehalten werden und da die Legierung nicht erhältlich ist funktioniert es nicht. Das Ziel der Organisation, die diese Geräte baute, ist es den Menschen zu zeigen, dass es diese Emission- freie Energietechnologie gibt, damit sie bei den Patengebern druck machen diese Erfindung frei zu geben, das wollen sie aber nicht, denn das hat tiefst greifende politische und gesellschaftliche Konsequenzen.
The center metal bar definitely needs to be conductive because it needs to carry the current from the stator to the coils in the motor. I am guessing that the silver-alum bar used in the inventor's video is used rather than steel or cooper is because of the conductive properties of the silver-alum metal is more efficient in carrying the electric field from each of the stators to the coil in the motor. In other words there is less energy loss with the silver-alum. The coils in the motor housing needs to be initially energized at 230v and maintained at 230v to continually produce power.
one more thing, by adding silicon to the formula would add uniformity to th flux field. But silicon-steel is normally in the sheet form to reduce heat.
Keep going, I think not enough power to fire it up. You getting closer every step, keep going don’t give up. Just imagine you have to start the motor so you can try it with electric outlet and as you mentioned on video adding a coils could be useful as well.
Hello, Thanks for your support. I appreciate it!
Finally, when you come back and update, I look forward to hearing even happier news from you
Thank you!
I noticed from your video that it seems you have the power strip not connected to the correct post on the motor. From the Liberty Engine #3 video, they do not have anything connected to the center post (Other the the wire from the coil). They are using the right and left post. I am not sure if you have corrected this or not. I also noticed that you are also using the center post on the other side where the wires from the microwave coils (Stator) are connected. Again, in their video they are only using the right and left post. Please clarify if I am missing something. When you turn the synchronous switch, I do not see it generating the needed 230v to energize the stator.
Тю.... да это же так просто !! Резонанс-его величие !! Вал внутри статора-это резонатор,и всего лишь.
@Scott KZhead AI brought your video up again and I empathize with your frustration. I think I left a comment on one of your videos again saying it is the problem of the bar. Maybe this time I explain a little bit more. Let's step back and think about the fundamental function of this setup. Take the motor stator out, leaving the cores, ring magnets, and the bar. The reason for the ring magnets is that they are the source of magnetic fields that generate electricity. However, the magnet field in these rings is not oscillating, and therefore no electricity can be produced (the fundamental of an electrical generator). For the field to oscillate, the bar must have the ability to conduct or rebel the magnetic field, so that when the field on one side is moving it also moves the field on the other side. That is the condition you need for this machine. The role of the stator is to trigger that oscillation and add a little bit of magnetic field to it (like giving a push to a swing). That is the idea of this generator. Now, for this to work, the key is the bar and it must have the capability to conduct some magnetic field and also rebel it. If you think about it, the ONLY way for this machine to be over unity (loosely term) is by using the magnetic field of the ring magnets and not the magnetic field of the stator. If this machine uses the magnetic field of the stator to generate electricity then it won't work because of Lenz's law. Hence, the copper bar won't work in this case because you don't need electrical conduction characteristics. You need magnetic conduction characteristics (or at least rebelling). This is why the original video uses (according to the video) a combination of diamagnetic (rebel magnet) and paramagnetic (weak magnetic conduction). Good luck to you if you decide to continue.
I have every intention! Thank You for your comments
😮
Are your magnets repelling?
i'm curious if you did this with a 3 phase motor like their video and then output it to some form of 10 X 1 transformer like a buck boost style auto transformer to drop to 120V? they claim that the center rod is non magnetic so minus some secret alloy i wonder if 100% stainless steel would work?
Hello. I'm considering building it with 3 phase, 220 volts transformer cores and coils. Then stepping it down usable 110 to 120 volts. I need an electrician to install a 220 volt line. Even with that, the choice of material for the bar is what I'm struggling with. I've already built it according to video (except for 3 phase and their bar). They don't make 3 phase 120 volt asynchronous motors. We'll see. Thanks!
Your problem may have to do to the length of the core rod and the shape of the flex fields of the coil. The magnets on the coil make the flex field ob-round instead of apple shape. So you may want to map the field of each coil assembly with a gose meter to see its shape. You want the field shape to be wide enough to contact the coils of the generator. this adjustment is possible by adding or subtracting magnets. A fat field would be the best for max induction. Too fat will interrupt other electric equipment. Just thinking.
@thelibertyengineproject ... they say to me .... We say clearly that it doesn't work if we don't make the bar with the special alloy. The cylinder is the heart of the machine. it is a non-magnetic alloy ... when I try a different way
The bracketts holding the transformer and the rod in between is it aluminum ? he made them out of steel ??
Hello, They are steel. I bought them rather than making them myself.The screw from the core makes direct contact with the bar. Thank you
Maybe try to use sliver coated wire to wrap around the bar ????. I don't know. other than that maybe go to yard sells and find cheap sliver plate ???? use the foundry outside to mix sliver and aluminum,then you could add one or the other till you found the correct mix. Best of luck.
Hello, Now you're thinking. That's a great idea! It probably doesn't even need to be silver if resonance is involved but we'll see. In fact, it would be easier to calculate the frequencies but we'll still see. Thank you!
@@ScottFogarty-iv9wt Thank you Sir. And please stay with it. All my best.
perhaps a voltage of 220 volts is needed to start and excite the winding but I don't know, what is really needed and, perhaps distribution of motor contacts without a jumper, the original video showed 3 jumpers between the bolts
Три перемычки указывают на включение фаз дв-ля треугольником!
If the liberty is not a scam, then you are correct that a specific alloy bar must be made because this is a one component that the KZhead continues to say is a trade secret. And of course, that would be a perfect façade for a sham.. certainly is good to see you trying to put it to a test.
How fast are you turning the 220V motor? 😢, just curious also about that?
Hello, Many different speeds with a meter connected to measure the voltage.The voltage has reached over 120 volts. That's why I think I need to connect the start capacitor. (Asynchronous, single phase, 120 volt Motor is what I am using My coils are 120 Volt) I am attempting to build a 120 volt version, Thank you!
Ive been playing with this idea for a while now and im using copper as well for the rod. silver is too expensive to melt and experiment with. if you use a 3 phase motor that puts out higher power you could step that power down to use it with your power strip with a converter. dont give up yet.
Hello, Thank you for the idea. I don't know if this is true or not but a comment was made that without a rotor within the motor's windings, the bar, in its place, will want to act as a rotor and turn. That would probably be a good reason not to have that bar made from anything that was magnetic and capable of acting as a rotor. If it were slightly magnetic and wanted to turn, the "locking mechanism" of the bar between the two opposing cores might secure it enough but if this is true, I wouldn't want to test it. Good luck with your build. Thanks again.
Without magnets on the rotor shaft there will be NO TORQUE generated on the shaft. The key to this machine is increasing and decreasing magnetic flux from opposite ends.
@@ScottFogarty-iv9wt @jaysonsnyder5409 vor 1 Monat The "Argallium Alpha" Alloy is Simply Electroplated AlGa.... Silver plated, Aluminum-Gallium Alloy.... AlGa is brittle and weak, can be greatly strengthened through electroplating with silver. The pores from the rotor in the previous video are results of silica casting the AlGa before electroplating. Machined parts would not be porous.
The motor you are working on is a,3 fase? Wat voltage are you working on?
Hello, I would use a 3 phase but I need 120 volts.
@@ScottFogarty-iv9wt you ever considered the use of a 3 fase controller
You have to help it start!
if it should work, you should test it with a 3 phase motor. you can achieve overunity only with a 3 phase motor. i dont know why. but for me it works. in a other way.
I think i seen that before , you start it with 110 and another motor and then once its going if wired right you can back feed the 3 phase one and shut off the drive mother and it will run itself with a free 110v lead to use. the more HP the motor the more power, right. been wanting to give that a try but dont want to fry anything.
Hello, we will going to build this, cause we're curious too. But at the Moment not all parts are available. We'll use 3-Phase asynchron Motors 2,2KW and 0,55KW wired in delta at 230V. The Bar will be 3 or 4 parts connected with each other of copper/nickel ore. To init we're going to use direct 230V from the Grid for aprox. 5 seconds than remove. What is the magnetic field of youre magnets, are left N and right N pointing to the center of your Motor? Thx in advance.
kzhead.info/sun/hrGBnbCfj4mIZI0/bejne.html
Hello, Both sets North facing outward. South facing inward. CAUTION: A comment was made that since the bar is taking the place of the rotor, the bar, if magnetic, will want to rotate (or something) because of the strong magnetic field created in the winding. I don't know if you would even have to go for 5 seconds. I would think that even 1 second would be enough. I wish you Safety Good Luck!
@@ScottFogarty-iv9wt Thanks and good luck, too.
@@ScottFogarty-iv9wtfrom another device and the LNER in Poland this year, there was some discussion of the Columb roule in that if you compressed two like magnets to a spark gap of a mill then you double the output of the transforma coils, magnetic energy push.
Your cylinder is still copper. It has to be alloy silver aluminum. They published their video look it up.
Hi. I would try to wire it like in the original Video. Let the middle wiring only be connected to it self , whith a metall bar. Also i would try an alluminum Bar out of its magnetic proporties. It creates probably arotating magnetic field inside the motor. And you are writh there are people how think over that the most time. Sorry for my english,, regards wolfgang
The wireless chargers work on thermal conductivity. The theory is to get the current flow fast enough to cause heat with in the magnetic field. The rod has to remain not magnetic but be super conductive. For a continuous circuit + to - you would have to have the magnets in the same orientation. looking like this N)))S -------- N)))S. Opposing would be N)))S ------ S((((N. Hope this helps some.
Es muss die technische Möglichkeit vorhanden bzw. geben die spulen von Mikrowelle hin und her zu schalten, dabei sollte Mikrowelle spüle jedes umgekehrt mit Strom versorgt werden, damit wird ein Magnet welle einmal S und N bewirkt, somit wurde der Motor durch die Wirbel Magnet Strom erzeugen, um diese zu erreichen wird auch eine große Kondensator benötigt, und wenn dann der Erfolg der Umschaltung auf 50-60 mall die Sekunde ist, kann damit Wechselstrom mit 50-60 Hz erzeugt werden, das mit stab ist nur eine Vortäuschung. Im Decker der oben aufgesetzt wird sollte die Technik sein. Falls andere Erklärung haben können sie auf meiner Darstellung antworten. An allen viel Erfolg, habe es auch gebaut und es geht nicht, wurde aber gehen wenn die Spulen immer wieder automatisch umgeschaltet.
Hello, Any pictures of your build? Thank you.
Hello, I don't know if this is true or not but I'm beginning to think that it is Frequency and Resonance that makes this work. A Frequency would be generated and set by the magnetic field of the motor windings (The Fundamental Frequency) then the other element's (Coils and Bar) Frequencies would be tuned (Harmonically Balanced) to the Fundamental magnetic field frequency by tuning their equally divided frequencies to the Fundamental. - Divided by 2, 4, 8 etc.. They would then Resonate with the Fundamental Frequency (Be resonant to the Fundamental). YOU MIGHT NOT EVEN NEED A BAR!!
This makes sense. Resonance would definitely have a multiplying effect.
If my understanding is correct and it is the two or three phase motor MUST be wired in in rotoverter mode and Must be correctly "tuned" with a precise "resonance" capacitor capacity to make it to act as an LC tank on the two drive coils and the other two coils run the non-motor loads. Any combination of motor coils and capacitors. You need a ossiliscope to make the calculations. An easy first build to understand the necessary skills is the rotoverter, that is where I started. THE SILVER DO NOT MATTER. I HAVE MADE MEG RECENTY MOTIONLESS ENERGY GENERATOR WITH 520V @ 63 AMPS EXCESS POWER. if you find a way to contact me I will share this privately. The materials and time are 95% less than what your doing with far greater power. Good luck my friend ,take care
@Blakeheimann, thank you, like the author I too was getting frustrated, my reason for picking up my pen is my target is 48v so can you advise how to reduce everything to go lower but keep resonance balance 🎉
Did you try to contact the hispanic guy from the Hidden Technology or The Crazy Channel who is the inventor of The Liberty Engine Project 1, 2 and 3 and also of the bike running with water project? What is his opinion about your work? I also believe that ArgAlium is not the key.
Hello, It would be amazing to talk with the person who has all the answers. Thank you!
He needs to subscribe for premium attention, they will assist him
I am subscribed@@elmultimediaschoolofartscu3924
Follow the material specified in the video. Don't replace it with any other spec.
I think he uses a ferrite core in the generator try to use a big ferrite . If it works, let me know haha 😂😂
Cut the stainless steel bar half size &leave 2mm space between& join with aluminum peaces with bolts;Split 2mm that bar; thát Is the secret.......
liberty has said as much that that its the alu silver alloy that makes all their projects work..
My bad. I ment to say use a Gauss Meter to map the flex field.
нужен статор от однофазного двигателя или все обмотки соединить последовательно - начало - конец ... и попробуйте поставить не феритовые магниты а неодимовые ... они сильнее ... и сердечник в статоре попробуйте заменить на обычный металл ... цветной металл не взаимодействует с магнитным полем ... это как вариант ... желаю вам удвчи ... я сам собрал Liberty 2 ... но у меня напряжение на катушках от трансформатора не поднимается выше 76 вольт ... и то при последовательном подключении на один сердечник ...ю выидимо все дело в количестве провода в первичной обмотке ... онор не по расчету сечения трансформатора ...ю одна обмотка на сердечнике выдает всего лишь 8 вольт ... попробуйте намотать свои катушки по 500 витков проводом 0,8 или 1,0 они явно ставят свои а не от трансформатора ... у родных катушек сопротивление 2-3 ома ... это мало ... посмотрите внимательно ролик с Liberty 2 - там видно что катушки другие - перемотанные и провод тоньше чем у тех что на трансформаторе
Помести внутрь цилиндра немного ртути. Сделай изолированный контакт с одной стороны внутри цилиндра и второй контакт сам цилиндр. Подай напряжение на контакты и ты увидишь как всё заработает ;) Place some mercury inside the cylinder. Make an insulated contact on one side inside the cylinder and a second contact on the cylinder itself. Apply voltage to the contacts and you will see how everything works.
Thanks for all your effort. As I already mentioned in one of my last comments, the Liberty Engine Team commented already on their own videos (they only answer channel members that pay monthly) that the secret lies within the alloy bar and that they can't reveal the composition yet. Additionally they wrote that without the exact same alloy bar the Liberty Engine would not work. They either had a breaking new discovery with this material that sience can't explain or it is scam. When I watch the video I doubt that somebody would do all this just to deceive people. It would be a masterpiece of deepfake. On the other hand they really earn money with that.
I'm curious and I'll check it out
Scam 100%
OK. Lan Solo . Dar ce compozitie de aliaj secreta , au folosit la primul proiect ? Liberty E .1 . ? Acolo nu am vazut nici un aliaj secret . si totusi functioneaza . ( " Si totusi se misca ! " ) . Explica L.S . fenomenul ! Este real sau fals ? Multumesc !
OK. Lan Solo. But what secret alloy composition did they use for the first project? Liberty E .1. ? I didn't see any secret alloy there. and it still works. ("And yet it moves!"). Explain L.S. the phenomenon! Is it real or fake? Thank you !
@@eugenantofie9453 Dear Eugen, I found a video on Hidden Technology channel which is run by the same guys that run the Liberty Engine channel. There you can find a video where they say that the LE 1 had a hidden layer of the same alloy under the black tape.. It is all a scam I'm pretty sure now, please convince yourself, you need subtitles, it is in Spanish: kzhead.info/sun/h9yHgMuRaWdnqYU/bejne.htmlsi=5fr72-b9JNYjc7uu
try no rod adjust distance between mags
I believe the copper rod or tube is too resistant to the magnetic movement necessary for this circuit to obtain resonance. Check out this KZhead: Copper's Surprising Reaction to Strong Magnets. I remember an image from a patent of a circuit consisting of a ferrite rod with a primary and secondary coil on the rod with magnets at either end of the rod. Supposedly, pulsed DC into the primary compressed the magnetic field of one magnet and stretched the other magnets field causing a rebound effect inducing a greater current in the secondary. This circuit you’re trying to replicate appears to be working with this same principle except with resonance. The copper rod is resisting the resonance.
Hello, Silver, copper and aluminum all react to the effects of Lenz's law. Silver and copper are very close in their resistance to current flow, copper being only slightly more resistive. In this process of the rod being in resonance, what would it be resonant to and how would it be brought into resonance? What would be the effect of the resonance? I believe it is a "tuning" process and that copper could also be tuned to be resonant to something else in the device. I don't believe that the content only of the metal automatically causes the bar to be in resonance. The result of the resonance in the silver/aluminum alloy might be stronger than the result of the copper bar, but copper could still be brought into resonance. (My belief) Thank you!
iyi günler kolaY GELSİN BENDE YAPMAYI DÜŞÜNÜYORDUM SİZİN YAPTIĞINIZIDA İZLEDİM ÇALIŞMADI YANLIŞ BİRŞEYMİ YOPTIM DİYE SORMUŞTUNUZ BENİM GÖRDÜĞÜM KADARIYLA MİKRO DALGA TRAFOSUNU KAYNAK YERİNDEN AYIRMAMIŞSINIZ ONDAN OLABİLİRMİ? BİRDE MOTOR TRIFAZE MOTOR SİZİNKİ MONOFAZE KOLAY GELSİN
The bar is silver&aluminum
I hope you get some info so you can move forward 😌👍
Thank you.
Některé MOT jsou s tepelnou pojistkou a proto tam jsou 3 vývody,podle videa vidím jeden vývod cívky nepřipojen,některé MOT mají dva vývody a tam problém s připojením není. Asi bych sundal festony a proměřil jestli mají cívky MOT obvod. Na svorkovnici motoru bych vrátil zapojení z předchozího videa, ale ještě to překontroluju 👍
Hello, Thank you for noticing that. That would make a difference with everything I build using that type of coil. I already have the "festoon" off and am designing something new for all those coils I have. I've never heard the word festoon before, Thank you again. Please stay in touch.
faston - konektor spojka, fandím vaší práci a budu rád,když se dílo povede,ještě se ozvu ohledně motoru,až to celé zkontroluju@@ScottFogarty-iv9wt
Hello, Thank you very much.@@user-fz2rr9dt8z
The coils are connected right at this point and the two wires inside of the motor connect them to each other and what happens
Screaming at the top of my lungs, saying that ive cracked it and yet, im ignored. Perfect 🤦♂️, my lips are sealed.
Hello, Why would you not want to share it?
@ScottFogarty-iv9wt I do, but the problem is. The element is not silver. It's a silvery type of element, and there is only so much of it.
Gallium?@@McFlysGaming
@ScottFogarty-iv9wt no, but it's part of it. It took me 5 months to figure out the elements. I just need to figure out how much of each element to mix.
@@ScottFogarty-iv9wt look for rare military use elements. Non radioactive
You have mounred the components on wood. The original was mounted on a steel base.
Hello, Thank you.
Isn’t that how we learn?
Silver alluminum bar
The one video that allegedly madeit work used silver aluminum alloy bar
It is NOT current through the bar but is MAGNETIC FLUX caused by a DIFFERENCE in flux magnitude. A soft iron core of the SAME metal as the microwave transformer material. You are doing a great job. Don't be discouraged. You need non carbon steel. Edison found 10,000 way that a lightbulb WON'T work. The bar is only PART f the key. I am working on the 1908 patent of Clemente Figuera that also works on variable strenght of magnetic flux. I have been learning for over 10 years and the gaining of knowledge is logrithmic. The more you learn the FASTER you learn. I'm 76 yearof age and learning every day. I encourage you not to give up. I'm in Arkansas.
The permanent magnets are all N--S and the magnetic FLUX flows OUT of the N pole and goes in varying lines of flux back to go INTO the S pole. There is what is called a bloc wall in the center of the length of the magnet where there is NO magnetism. Start your set up with ONLY the permanent magnets facing each other N pole to N pole and the soft iron or silicon iron connector rod between them. Do NOT have the motor coils and housing covering the rod. Use a sheet of Plexiglas to set over the rod and put iron shavings on the Plexiglas near the center of the rod. Now pull the permanent magnets AWAY from either end and the magnetic flux should move AWAY from the end that still has the magnets attached. This experiment will tell you if you have the right material for the rod. When you put the magnets back on, the shavings should be pushed back to the center. Then remove the magnets from the OTHER end and the shavings should go opposite of before. This is the FLUX movement that the device has to have when the transformer electro magnets CANCEL the flux at one end but ADD to the flux at the OTHER end. You can do this by charging the coil at one end with a 12 volt battery with positive going in on one coil while having it negative on the other coil. The iron shavings should go all the way to the end away from the positive charge. Then reverse the leads and they move to the other end. Now you are ready to complete the device. NOW for the MAGIC. When the motor housing with the coils is placed over the rod between the transformers, the transformers should be hooked in series with the connections opposite just like the battery was connected. Now when the synchronous motor is connected and turned, the charge SHOULD activate the transformer coil on one end to push the flux and the other end to nullify the permanent magnet flux causing an electrical current to be formed in the motor windings that will now REVERSE the flow so the the ends switch and the FLUX moves to the opposite direction. The device should now be running with NO movement or noise except for the oscillating flux creating electrical current..
The electrical current will have VOLTAGE but no AMPS until a load is applied to the device. Then current will flow through the load doing work. The electrons moving through the wires will then RETURN to the Liberty Engine device in the opposite electron flow with no loss of electrons.
Scott, did you test run your motor before you took the rotor out to be certain the it was wired correctly? Then the only wires you need to remove is the supply wire from the wall socket and replace it with the pigtail row of sockets with the off-on switch. Then the two wires that go to the coils on the transformer cores are connected with positives to the outside poles and both negative wires in the center. If the device does not fire up when charged up with the synchronous motor then reverse the wire connections on ONE end at the transformer coil. The transformers should be charging up at the SAME TIME and the forces should be in the SAME direction. This nullifies the permanent magnet forces at one end and doubles the flux strength from the opposite end. That flux can now push all the way through the transformer core that is nullified and come BACK through the motor core and copper coils to the end of origin and continue this circuit for 1/120 of a second before reversing caused by the current that has JUST been created by that magnetic flux flow. The device is NOW self running. CONGRATULATIONS!!! YOU ARE A MAGICIAN!!
Neodymium magnet
Eles falaram que essa barra é feita de alumínio e prata, ela não é condutiva de energia.
SCOTT, there is a FULL SET of 10 books of Hawkins ELECTRICAL GUIDE for 99 dollars and 8 for shipping @ 6am 11/28 Hope you can get them. Gene
SCOTT, I'm going to take the time to document what I believe is the complete workings of the LIBERTY ENGINE. The first thing is the material for the center rod that connects the two transformer coils. This material should be a very soft annealed iron core that is smooth and round and one inch longer than the distance between the outside ends of the copper motor coils such that when installed inside the motor coils there is 1/2 inch clearance between the outside wings of each of the transformer cores. When everything is assembled, the transformer coils should be facing each other and double sided taped to deepest part of the center of the E transformer cores. The permanent magnets pairs should be tested for N and S and should be attached with their own magnetism ( NOT GLUED) to the far outside of the transformer cores with their N poles FACING so as to repel each other. This causes the magnetic flux fields of BOTH magnets to flow to the center of the length of the rod. These opposing flux fields then turn 90 degrees OUT of the center rod along the rod toward BOTH ends and back to the S end of BOTH pairs of permanent magnets and into those magnets. As long as the magnet pairs are attached, this flux flow will be active. NOW if ONE pair of magnets is REMOVED, the flux flow from the end with magnets attached will flow though the length of the rod and into the center leg of the E transformer coil and around and out of both of the wings and through the copper coil loops and through the iron core of the motor and continues through the copper coils again on the opposite end of the motor and into the wings of the transformer and BACK into the S pole of the magnets. THIS action has caused an electrical charge to flow in the copper wire in one direction as the first part of an AC current. The opposite flow in the the copper wire occurs when the magnet positions are reversed and that would COMPLETE the AC cycle. THIS is the effect that takes place when both electromagnet are charged in the SAME direction. One pair of permanent magnets are canceled by the flux of the electromagnet facing in opposition, as though they were REMOVED. Then the electromagnet at the opposite end ADDS to the flux of those permanent magnets such that a STRONG flux flow in the SAME manner as before and the flow through the copper coils is now sufficient to create a strong electrical current that is one part of the 120 v AC. When THIS current is generated, it causes the electromagnets to be charged in the opposite direction, causing the flux to flow in the opposite direction and the copper coils will be charged in the opposite direction such that the rest of the AC cycle is complete. THIS causes the electromagnets to reverse charge and the cycling continues. With the correct wiring to the motor coils, the output can go to the cord for lights, fan, etc. and the wires to the transformer coils are wired in parallel such that they charge 90 degrees lag to the AC current. Once the device is started with the small synchronous motor, it can ONLY BE STOPPED by removing one pair of permanent magnets. THE NUMBER of copper coils in the motor SHOULD be wired in such manner that the current necessary to RUN the motor will be the SAME current as the output.
Interesting, my comment was deleted. Why?
nemáš dobře zapojené trafa,jeden vývod vinutí máš nezapojený na obou trafech ,musíš propojit krajní s fastonem
Thank you.
Согласен с коллегой! Поскольку двигатель 3х фазный , включение МОТ-в началами на обмотки А и С, концы на обмотку В!
I do this building..but not work..i use a rod in steel..same like this..cannot out of power
Use camera treak
If you take a look at the Newman patent, it might take you in a totally different direction in your work. I looked at the liberty engine as well. As many of the videos on YT, it just doesn't make any sense other than to waste your time trying to make the bar out of unobtainium or whatever they want you to believe. The composition of the metal doesn't seem to be the deal they are making it out to be unless you want views and channel members.
Have you tried ferrite. its none magnetic? Cores are made from silicon-steel or ferrite for magnetic flux organization. That's why alum-silver makes no sense.
kamu bisa menggunakan listrik rumah untuk memulainya lalu lihat berapa teganggan yang berputar di sana
cívka MOT má 3 vývody a dva konce vinutí,jeden je na festonu a druhý na festonu není,musí se udělat klema mezi vývodem cívky a festonem,není tam obvod
Hello, I never noticed that! This is the way 120 volt MOT coils come right out of the microwave. Did the ones in the video also have to be modified? Thank you!
この装置簡単に駆動できます。
I stop to
I hope i haven't overloaded your brain with all this but there IS still a LOT to be shared to get this thing built. I wish there was a SAFE way to comunicate directly because THIS is going WW.
Hello Gene, I am learning lot but I feel like I am reinventing something. Maybe that's how it needs to be. I'm wondering if a finished replication of #3 will look or operate anything like the one presented in the video. Many of the comments are confusing and conflicting. It feels though like most people want to help. My main concern at this moment is whether to keep the asynchronous, single phase, 120 volt motor or reconfigure with an asynchronous, 3 phase, 230 volt and step it down somehow to operate 120 volt devices. I have both motors but I don't have the 230 volt transformer cores or coils. First things first? Thanks so much!
Scott, because we in the USA are not on 50 Hz with 230 v , which is the rest of the world, in a sense you are NOT building exactly what Liberty did and in that sense you are a Pioneer. The PRINCIPLE should be the same, but some details have to be discovered. One of the things that I have discovered since working on this with you is the squeezing effect of the magnetic flux at the end with the electromagnet opposing the permanent magnets. The electro magnetic MUST be the EXACT strength as the stacked permanent magnets to EXACTLY cancel the MOVEMENT of the flux. What THIS does is force ALL the magnetic flux field to separate and follow the path of least resistance which is OUT the 2 wings that are on the outside of the transformer core. That combined FLUX combines WITH the COMBINED FLUX from the OTHER end so that ALL THE FLUX from the four permanent magnets AND the flux from BOTH the electromagnets are COMBINED to flow THROUGH the copper coils and soft iron core holding them, to create a moving flux field through EVERY turn of copper wire on BOTH ends of the housing. Each end is in the opposite direction of the other regarding current flow. It is NOT the flux moving through the BAR, but it is the flux moving through the coils of copper that creates an electrical current. That current lags the flux movement by 90 degrees and THIS current REVERSES the electron flow through the coils of the electromagnets and reverses the flux flow so that the moving flux now flows into the copper coils from the opposite direction causing the current created to flow in the opposite direction finishing the sine wave of ONE Hz of 60 cycles per second. I HOPE I have explained this well enough for you to diagram it on your computer and share in a video. Hope this helps. Gene
Hi Gene, Great Explanation! So the bar organizes the magnetic flux from the windings (the more efficient the bar is the more magnetic flux available), creates a path both ways to the magnetically balanced cores, the magnets force the flux to the sides of the core (wings & least resistance), then into the coper coils where the coils generate the electrical current back to the motor windings and to the strip that awaits loads to be connected to it and then the balanced cycle repeats itself?.@@genebollinger1838
That is the way I understand it. I have one transformer core and 2 magnets and very low magnetinzing silicone steel core material that I got as samples that are from a company that MAKES the transformer cores. I also have a home built machine that can divide 12V DC into two separate streams where one is at full 12v and the other is at 1.5v and then where they are less and more-- then equal-- then more and less-- then 1.5v and the opposite end 12v DC. I can turn this cycling down to as little as 2 cycles per second. With a sheet of Plexiglas plastic and steel filings, I can actually SEE the flux PATTERN and MOVEMENT. This is what MOST people can't SEE but I CAN see. The 12 v DC is 1/10 the value of 120 v AC. The device has a variable speed DC motor so I can then speed it up to 60 Hz and see the final pattern. Where are you located? Is there a safe way we can communicate besides all this typing? I am in Arkansas. Just threw that in there for thought. What I am not certain of is how to perfectly balance the changing flux but if the magnets are identical and the transformer coils are also identical, and the coils in the motor windings are equal in N and S windings then it seems reasonable that both sides of the fluctuating pulses of flux should be equal and opposite. As for the small synchronous motor that starts the process, I noticed that when you tried to fire it up that the reading went to over 500 volts AC. You also said it will shock you. That indicates to me that the core is NOT carrying the magnetic flux as it should or the voltage would stay around 120v AC. There is too much resistance of flux flow through the rod. DID YOU get the information about the 2 books on ebay on magnetism and electricity??😢
Hi Gene, that was only 50 volts on the meter. Don't touch the connections to the synchronous motor. That's when I got the shock. If you're using DC how about Buck converters with split source then combine. Are you thinking DC with this #3, then rectification? We do need to find a better way to communicate
three things must be synchronized length of bar and speed of sound in this bar which depend on its material and the frequency of magnetic field
Hello, So resonant to each other? Is the frequency of the magnetic field the fundamental? If this is true, it seems like other materials could be adjusted to be in resonance. Thank you
yes but there is mor information like magnetostrictive of this material and other.....
Hello, I'm ready for more helpful information Thank you.@@ashrafatteya
That is too difficult to find aluminium silver bar
“THINK ABOUT ‘doping’. SILICON WAFERS are doped to enhance lattice structure for layered application. I LOOKED at AL-AG alloyed composition based on given properties. SPECIFIC GRAVITY of AL is greater than bar alloy. MG IS commonly used with AL & would decrease SG. A THIRD element contributes a desired property & it is one that decreases SG. CONSIDERING FARADAY’S early experiments, I think bar function is to advantageously alter typical, magnetic field. THINK ABOUT what field does without any bar & then about what it does with copper. NEW ALLOY must alter field significantly but how? IS POSSIBLE an alloy has a property that doesn’t allow magnetic ‘alignment’. IT’S RESPONSIVE to magnetic induction but when in a field, it never becomes statically aligned. SUCH A property could perpetuate field oscillation. IS POSSIBLE an element exhibits property & is quite valuable. AL & AG are used to add properties, obfuscate & to hide it. IF FIELD oscillation is problem, then you can add a coil around your CU bar & connect it to pulsed DC. YOU SHOULD see oscillation. I WOULD look at trying neodymium or FE as third element. IT’S NOT likely to be CU (that has ‘susceptance’ to magnetic field) but I think it must be an element that can become ‘magnetically aligned’, unless in a lattice structure with AG & AL. LIKE A silicon wafer, a lattice with ‘unstable susceptance’ might benefit from a consistent pattern of holes, that decrease SG. IT SHOULD almost become magnetically aligned. IT MIGHT be a property discovered in quantum research, whereby atoms at opposite end are strangely ‘pseudo-paired’. DESIRABLE MATERIAL would ‘reverberate’ magnetically; ringing.” 😐
you did not show to run it
I swear on my testicles its real, be persistent it'll come meditate on it!
You don't have to do that! 🤣 I believe it's true too. I'm hanging in there. We'll see.Thank you!
Saya sangat antusias dengan usaha anda,dan tetap menunggu hasil yang akan anda dapatkan. Dan sepertinya anda menerima beberapa saran dari beberapa orang yang memberikan komentar dan saran pada anda,saya melihat anda lebih memperpendek batang yang berada di tengah,dan mungkin anda sudah mengetahui beberapa perubahan yang terjadi,semoga anda berhasil !!!
Thank you!
Wlc bck brooo
Thanks
I TEXT YOU 2 TIME,BARR IS ARGALIUM=SILVER, GALIUM,ALUMINIUM ALIAGE.
May be he cannot read yohr comment...please write in arabic may be he can understand...😂😂😂
If it was real, KZhead wouldn't let you see it.
Nah
Io o osservato bene ogni dettaglio di questi ragazzo ma sto guardando anche il tu ma mi sembra che hai collegato i cavi sbagliato none come a fato il ragazzo e non posso dire se vero ne anche falso dovrei provare a costruire uno poi dovrei dire se falso
The roller must be pisoelectric. Electric charges are induced on this material, or more precisely on its surface. The motor must be 3 phase, more rotating magnetic fields.
you will not find any 120Volt in 3 phase it's only 1 phase . I will try that project with a 230volt 60hz 3 phase it's just miss me the micro onde transformers. I know that's be so frustrating to build that project when it's not working. I am sure that you will found the answer. Maybe they not tell all the true but i know for sure they not build theirs project for nothing !
Hello, Please keep me posted Good luck on your build!
Пожалуйста переведите на русский язык.
The small synchronous motor ONLY has to be turned for 1/120 th of a second to get the pulse needed to start the device. The bar has GOT to be the same material as the transformer cores. I DO think about this kind of devices ALL THE TIME. Three o'clock in the night is download time from the HOLY SPIRIT. Keep praying for understanding and wisdom. And read what I have sent you because IT is valid and true.
Hi Gene, Thank you so much for your information. It’s very enlightening! I have to study and understand it. In no way am I trying to be a smart ass or claim to know more than you (because I can tell that I don’t) I’m just trying to get additional clarification. Any claims here are based on my understandings. I’m about to go down a different rabbit hole so I have a few questions: I have to be able to draw this principle on paper (computer). That’s the way I learn and remember. * Knowing that 120 volts are needed, 3 phase or single phase? Or alternator windings? I also have a Cantoni Group #12155995 .75 HP, 3 phase, asynchronous motor similar to the one used for #2 motor/generator. I’ve been told that it won’t work for 120 volts. * The bar: A single material? Could it be made a larger diameter to reach the outer windings more? * What would be the ideal composition of the bar from center to outside? I can see how the bar could be manufactured based on my recent views. * It seems that a material that is able to be magnetized will have torque on it and will want to turn in a revolving magnetic field. Even silver, copper and aluminum will want to turn. (Lenz’s Law). (My understanding) * The voltage without amps is a tough one for me V = IR Voltage = Current x Resistance These are not the only questions I have. Thank you!
@@ScottFogarty-iv9wt Thank you for your response. I have a great deal ofactual build experience in fluctuating magnetic flux fields. A single phase motor is best for what you are building but should be a brushless asynchronous 120 v AC sometime called an induction motor. The voltage without current is exactly like the wall plug in your house. Put the leads of your voltmeter into the socket and it reads 12 volts AC. Yet there is NO current flowing until you PLUG something in that is drawing current and work is being done. The electrons are flowing from the positive wire through the work and back through the white wire and back to the wall socket. But those electrons go BACK to the TRANSFORMER on the pole outside but DOES NOT go back to the power station but returns BACK to the house again. The power station only sets the 60 Hz rate that the electrons move. These are the only two questions that I remember from your reply. I will go back writr down all your questions and answer ALL your questions AND ANY other ones you have to get this device to be successful. As soon as I saw this device about a week ago I knew how it works because of the hands on work I have been doing. I have made a home built machine with a variable speed motor that puts 12 v DC through a commutaror with 32 poles so that I can make current from 1.5 v DC up to 12 v DC and a second current 180 degrees opposed so I can watch the flux move at as slow as 2 cycles per second. I used a Plexiglas sheet with iron filings to watch the flux change. I will send you more info soon as I know how important it is for you. Here is to your success. Gene
There are a series of books copy righted in 1917 called HAWKINS ELECTRICAL GUIDE with 10 books that is in a question and answer format that is VERY easy to understand. There was a FULL set of 10 on ebay 5 days ago for about $160 plus shipping. WELL worth it for complete knowledge of what you are building. The rod through the device should be ALL the same material and according to Hawkins Guide is VERY SOFT annealed iron and I would also add that it needs to be thin laminations and round so there are NO sharp edges. Sharp edges cause flux leakage and eddy currents which are counter productive to flux flow. The bar diameter needs to be the same diameter as the HOLE in the permanent magnets. When the permanent magnets are by themselves, the flux comes OUT of North and goes around and back IN the South. Be certain that these magnets are CORRECTLY MARKED. N to N repulsion is about twice as strong as the S to S repulsion. Very important in this build. Place the two pairs of permanent magnets on the ends of the transformer cores. They SHOULD cause the transformer cores to repell each other. Set the transformer cores with the low voltage ( 110 v) coils in place. Use a 12v DC battery and leads to connect the terminals of the coils at both ends in parallel Positive and Negative to charge the coils. What has to be determined is that while the Left end coils ADD to the permanent magnets N pole and the other end the charged coil opposes the N pole of those magnets and completely cancels the N pole flux. Then when the current changes direction the exact opposite takes place and all the strong flux is on the other end. There is NO interaction between the outer copper coils and the center rod due to the AIR gap of nearly 2 inches. VIRTUALLY ALL of the flux stays within the center iron core and the OUTER core of the motor stator coils. It is THESE coils that charge with the moving magnetic field flux that is RETURNING back to THE STRONG charged end and is moving perpendicular to the copper wire that is on both ends of the motor housing. On page 124 of the Hawkins Guide it says that there is approximately 28 pounds of energy is converted to heat in making a double reversal of STRONG magnetization in one cubic foot of iron. Are you familiar with what is called a tank circuit? That is two circuits that are MATCHED is such a way that as one circuit is charging up the other is discharging down and then the induction of the first causes the second to charge up while the first discharges down. This is what we are creating. Most of the time there is an induction coil and capacitor in the circuit. This is using the energy stored in 2 separate but equal INDUCTION CIRCUITS.
Alternator windings may be a possibility in future builds but an alternator is a 3 phase circuit that has brushes and is rectified with heavy diodes to get a 12 v DC output. That becomes more complicated than a FIRST try. Once we understand EXACTLY how this works we will conquer 220 v AC in two opposing 110 v AC circuits 180 degrees out of phase with a ground between to give us a DEVICE able to run a house with NO POWER COMPANY.
THAT wall plug comment should have said 120 v AC not 12. Typing is a VERY difficult way to communicate!
ah man sorry i feel your frustration, but i`ll be honest with you, you are being too naive for all this... there is specific science behind that and first you have to understand the concepts before being involved as you would get frustrated, in general you are trying the one that is impossible, because the special alloy bar is not supposed to be conductive, you need to understand there are different properties of electricity at different frequencies it operates, what the bar does is something you need complicated setup to get otherwise, it makes it resonate in a way and the electromagnets amplify it, so the resonance wave passing through the coil generates movement of the electrons inside the wide.... If youd ask me try to build the 1version of liberty engine, it would be much easier to learn and get into it without much frustration as there is no special alloy its the old school way
There are already a lot of people who tried the first version without success on KZhead. I even tried it myself.
@@_LanSolo_ i tryed myself too and failed, but then i found a dude on utub from nigeria, he wanted 2500$ and i payed him, he explained me how to do the wiring, basically its important to phase shift one of the 3phases of the generator, this way with bridge rectifier connected to battery and then with again some wierd wiring powering a DC motor as prime mover with higher hz electricity and its cold, it doesnt get warm i put it to different generators, and i managed to get 220v.... i just now need to get a supercapacitor and a bigger battery, then i can loop it over on its own
@@_LanSolo_yes liberty engine 1 and 2 no one was able to replicate, and they say several lies in the path, first that was the shape of the magnet, later that was a secret alloy. Look like scam, smell as scam, is an ...
@@_LanSolo_ Because they are FAKE. I too wasted my precious time with their deceptive and Hidden "wire" Technology's.
Look at the frekvens 50,0 hz hov is it posible Ho ho time for Christmas
Electricity won’t produced without a constant movement between the coil and magnet. The guy with the masked face from other video is nothing but a deceiver who tried to get 5M views. Don’t waste your time, energy, and money on something that goes against physics.
Ha. It seems much easier to bring this thing to work... kzhead.info/sun/arp7mLNolpuirKs/bejne.html Sadly it's all fake I fear. I never get this Motor Version #1 und Version #3 runnig. Wasted only a HUGE amount of time.
😮 it's fake bud. I been building pulse motors for years. And it's very addicting. Search 4 ft 120 lb 320 magnet pulse motor. See you in the rabbit hole my friend. Lost my mom 7 years ago.🎉🎉
Hello, Thank you. Sorry to hear about your Mom. It's tough. I think I've come across a picture of that. I'll check it out. I followed Mike Kantz at Quantamagnetics for quite a few years. He did great work. He would have loved this stuff. I've built a few myself. You and I both know that over unity is real. Easily. But what is happening is a loss of confidence by the people who were beginning to open their minds to the possibilities after being told to that there is no such thing as perpetual motion or you can't break the rules of thermal dynamics. Those responses were programed into people's minds over the years while progress was being made by people who wanted to share it. These secrets are not good for progress. (I'm sure you already know this) Thanks again!
Scott, the over unity was explained to me by the example of a glass of water. You can't get more water out of the glass than what YOU put in. That is Lenz law. But if you put the glass at an angle under a running faucet, then you can get an unlimited amount of water. THAT is the Limitless LAW. The atmosphere has enough excess electrons in a coffee cup volume to boil all the oceans of the earth dry if it was harnessed correctly. WHEN we harness this dilemma, we will NEVER have a shortage of supply. EVERY electron that is taken FROM the EITHER goes BACK to the EITHER.
Gerçeklikle hiç alakası olmayan deney. Üç kuruş gelir elde edeceğim diye bu tür deneylerden vazgeç geçin.
This whole of taking a generator apart and reconfiguring it to try to do the same thing is the key to being fake. Why not just spin the damn thing with something reliable. My 3 attempts to explain was divided by a nights rest when it came to me! This is fake, but most of all unnecessary.
Tu critique sans avoir construit... franchement T nulle
I wish that I understood French, I would love to keep this conversation going in all languages. This is the best way to solve any problem, by having people look at this wonderful problem from different angles. Once we find the best way to absorb the flux field and direct it to where we want it to go without the turbulence that will turn the energy in to heat. We may need additional elements such as Iridium and Gallium so as to work more like a superconductor. But you then need to cool the core by adding a cooling chamber (drilled hole threw the core with fittings and pump liquid nitrogen to control it's temperature. Just thinking.@@philippebertel1779
Не мучился это не работает..... Фейк.
"If they respect you, respect them. If they disrespect you, still respect them. Don't allow the actions of others to decrease your good manners, because you represent yourself, not others". And I would add: (But don't trust them). Would you care to share any pictures of your work? Thank you.
@@ScottFogarty-iv9wt Dear Scott I appreciate your work but let me tell you one thing: The same guys from Liberty Engine Team are running another channel called hidden technology, there they upload 100% scam videos. Please convince yourself: kzhead.info/sun/od5rf8iJoHmPnmg/bejne.htmlsi=7JYTRGhCY3QKZjC6
Look up gerard morin hes onto a large part of this equation
Devi mettere in un crogiolo e fondere queste percentuali: il cilindro 65% Argento 10% Alluminio 10% Nichel 10% Cobalto 5% Silicio in questo modo funziona....La barra di rame non funziona.....io ho fatto la fusione e tornito il cilindro e funziona perfettamente!!!! 😉 Inoltre il collegamento superiore alla scatola è Sbagliato....😂😂😂😂😂
Look like a good recipe, someone else can confirm this?
Quanto ti è costato fare la barra?
@@ErmannoMaselli ho il crogiolo fatto da solo totale 80 euro
@@Lilin...Calabria If that work, you can produce and provide that bar for us in europe?, How much? replication by a third party is needed to ensure that you have the right mix.
Se funziona, possono produrre e fornirci quella barra in Europa, a quanto ammonta, e avete bisogno di una replica da parte di terzi per essere sicuri di avere la giusta miscela?
Its beeting ya up cause you dove into things n didnt learn enough of components first.....look at how you hook up a 3phase motor at home when u only have 2 phase available.....thats a huge huge huge aspect of understanding the difference if phases and youll need to learn differences in brushless dc motors reg dc motors and ac motors and bridge diaodes and capacitors
Absolutly you need a magic powder or a skilled wizzard. 😂 This will never ever work. Forget it... Or... You can go back to school, but do not sleep on physics lessons, then you will realize again that it will never work. 😂 Trying to ne positive? 😂 Come on... Scrap it... It will never work...