SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version
SECRETS AND MANUFACTURING PLANS OF THE LIBERTY ENGINE 2.0. English version
LIBERTY ENGINE 2.0 NON-CUT PERFORMANCE TEST.
PLANS AND SECRETS OF THE LIBERTY ENGINE 2.0
The big energy companies have managed to ban our video, but we will continue to fight them and we will repost this video on KZhead as many times as necessary. Together we will make this world a better place.
Many subscribers have requested the plans with measurements of the "Liberty Engine". You have also asked us for the electrical diagram. Others ask us to say what is the exact composition of the special alloy with which we have made the rotor. And others have asked that we do more testing and take measurements of voltage, frequency and power. Well here you have the most anticipated video of the century. We hope you like it...
Please note that we cannot sell our prototypes, but we must warn you that we have detected several fraudulent companies that try to scam people by saying that they sell copies of our "Liberty Engine", but those copies do not work. BE VERY CAREFUL NOT TO BE SCAMED
- Spanish version of the video:
• Video
__________________
TURN ON SUBTITLES. THEY ARE TRANSLATED INTO SEVERAL LANGUAGES
INDEX:
00:00:00 Intro
00:33:00 Questions
00:38:00 FAQ 1: Can you provide us with the electrical diagram of the "Liberty Engine"?
00:52:00 FAQ 2: What are the technical specifications and power consumption of the "Liberty Engine"?
01:34:00 FAQ 3: Can you demonstrate a high power load test simultaneously?
19:06:00 FAQ 4: What are the transformer specifications?
19:35:00 FAQ 5: Can you show the mechanical blueprints of the "Liberty Engine?
20:01:00 FAQ 6: Can it generate 110 volts?
20:26:00 FAQ 7: What are the rotor dimensions?
20:51:00 FAQ 8: What are the magnet dimensions?
20:58:00 FAQ 9: What is the exact alloy of the rotor?
21:33:00 FAQ 10: How can we purchase a prototype?
22:28:00 FAQ 11: If they are patented. Don't they expire after 20 years?
23:24:00 Thanks
__________________
If you want to have access to see the complete video without cuts of this performance test of the "Liberty Engine", you must become a Member of the Channel. Only then can you enjoy this exclusive content:
- Spanish version: • PRUEBA DE RENDIMIENTO ...
- English version: • LIBERTY ENGINE 2.0 UNC...
- To become a member of the channel, click on the following link:
💥 / @hiddentechnology_
We want to thank all the members of our channel, but especially the Elite members:
- seduccion
- Diyson
- harpinKeith
THANK YOU!
__________________
Purchase links on "Amazon":
- Air heater 3000w 220v: amzn.to/3OHJbKb
- Energy Meters: amzn.to/3IG1njL
- Motor starter: amzn.to/3OExynf
- Driver Leds: amzn.to/435QSOK
- Digital multimeter: amzn.to/43nrW4Y
_________________
Warning: The use, copying, manipulation or transmission of this video or part of it without the consent of the author is strictly prohibited. This video is protected by copyright.
HOW WE RECORD OUR VIDEOS
- Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- COMAN tripod: amzn.to/45u6uNs
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
- Articulated arm: amzn.to/3opJSxc
- HDMI adapter for iPhone: amzn.to/45vCvVl
- Bresser pantograph F001483: amzn.to/3MUW16t
Join us!
💥 Telegram Private Channel: t.me/hiddenTechnology
💥 Facebook Channel: / hiddentechnologyyt
Business:
dakrazychannel@gmail.com
Electric generator
brushless generator
free energy
infinite energy
Based on my observation, the fundamental principles of the presented current generating machine, are based on my country's fellow man, Nikola Tesla invention, "Method of Obtaining Direct From Alternating Current" Patent No. 413.353 Patented October 22, 1889. In that patent, Nikola Tesla stated: " I am enabled to produce a self-exciting alternating dynamo ... Thank you for sharing this video with the revelation of its principles, and methodology of making it, it is inspirational and motivating, and pointing out how great the Nikola Tesla futuristic mind was for generations to share free!
Hi Can you help me to make this on whatsapp.
This sort of technology has been around and suppressed for so long! My hat is off to Liberty Engine to bring it into the light of the public now for low cost energy to the world so we may finally start directing our funds into other area's of technology instead of energy! where it should have been for so long! Thank You Liberty Engine Technology! I believe you have done this to where the world will finally receive it and accept it!
Greetings to everyone from Azerbaijan. I have made a generator from an asynchronous motor. Now I have an asynchronous motor. It is possible to make a generator with a condenser. I made an asynchronous motor. It is magnetic inside and infinite. That's why I believe in you. Greetings from Azerbaijan. If anyone does not believe, he can see that magnets produce electricity by turning any dc motor. This means that everyone is familiar with physics. People already wrote the laws of physics, man, he is right, when it comes to patents, the oil companies confiscated them. If such inventions come out, no one will use oil. It can be written in a way that is against the laws of physics, but that does not mean it cannot be done. Just because you failed does not mean that no one can succeed. Hidden Technology. I am proud of you. Good luck to you.❤
From the first time I started watching your tech, you always hide a vital part that could make it work. When I tried to produce it, it becomes garbage. If you want to help us get your tech for free as you claimed, please release the full video with your secrets to enable us benefit from your technology.
thank you for save our time and money.🙏
Thank You for save my time and money love from asia
If you're talking like this you're discourage others who want to try, if you're a competent electrical engineer you'll understand it's possible, there're lots of it on KZhead in deferent forms though they might not as perfect as this remember he said it took him seven good months to make it so everyone wants ready made food to consume, sooner or later you'll see we're all in the field searching
110v?
He a lier dont believe him a save money , in first video he made woth car alternator didint work it i made and it sgarbage
Please repeat this demonstration with all of the equipment mounted on a glass table in a clean environment. Please demonstrate clearly that there is no possibility of an external power source! I do not believe you could demonstrate it running without external power source 👍
It's recycling the energy. The rotor that he pulled has an output bigger than the other one. The one he built is around 4 times bigger. Maybe 4times the output. The weight of the aluminum alloy has an effect on the speed and momentum as a whole. It was Nicola Tesla who built the very first magnet generator.
I don't seem to be able to reach other ppl directly, when the KZhead channel has served its purpose...
Material Conductivity (Siemens/m) Aluminum (37,667,620.) Copper (59,772,863.) Silver (62,893,081.) Iron (10,298,661.) Copper and Silver have a conductivity slightly less than twice that of aluminum, allowing eddy currents to be established with correspondingly greater magnitude, resulting in an increased of torque. Stainless Steel has a conductivity approximately 40 times smaller than aluminum, and thus cannot carry any eddy current as well as aluminum, copper, and silver. Iron is there for an example but, I still don’t know the mixed to ratio. Update: 7/5/23 Aluminum Copper Beryllium Bismuth Cu,Be and Bi will be 1/16th (6%) of the total amount of the Rotor. So, 82% Au, 6%Cu, 6%Be, 6%Bi will give us with 100% in total. I also know the model of the motor he's using and its not the specs he put in the video😉. I believe he's using 3 different patents to create this Art Work and without a doubt, this machine works. Update by AI If cost is not an issue, and the silver content needs to be more than 75%, the composition of the alloy for the perpetual electricity generator rotor could be adjusted as follows: - Silver: 85%-95% - Aluminum: 2.5%-10% - Copper: 1%-4% - Zinc: 0.5%-2% - Nickel: 0.5%-2% - Magnesium: 0%-1% - Titanium: 0%-1% - Beryllium: 0%-0.5% This composition would have an even higher silver content, which would provide even greater electrical conductivity than the previous composition. However, it's important to note that increasing the silver content beyond a certain point can also reduce the mechanical strength of the alloy, so this should also be taken into consideration. Again, the exact composition will depend on the specific properties and performance required for the perpetual electricity generator rotor, but this provides a general idea of how the composition can be adjusted to increase the silver content.
But 7600gr 1037,3cm^2 82% Aluminium have more cm^2? I think; 62% Silver, 20% Alu, 6%Kupfer, 6%Beryllium, 6%Wismut The Magnets attaking the Iron with 18kg x4 =72kg. The Rotor musst the Iron the Magnet attaking reduzieren?
@@mikehaertschLenz's Law. I went with these metals because of a patent by Donald Lee Smith. This Liberty2.0 runs on radiant energy and it also need to be coated with Shellac to prevent energy lost through eddy current. It also follows another guy name Robert Adam from New Zealand. he's patent are lock by the military and will be confiscated by law if built. This device can also be improved by using Thane Heins Transformers. Re-cap, Smith pulls radiant energy from aether, Adam can pull 800% of radiant energy and Thane can multiply that with his transformers.
@@joelhurel6970 it’s not regular energy. It’s radiant energy, with radiant energy you can push 53amp at 12150watts on a 10gauge wire. Think of it like speakers, it frequency that is passing through those wires and not AC electricity.
@@McFlysGaming Hi, can you elaborate more on the patents you've mentioned? Where are the patents of Donald Lee Smith and Robert Adam? Where are you getting this information from? Thank you
@@tess007 change of plans I’ve found the original creator, Jean-Claude Cordier. There is two videos of him on you tube
You are amazing people, thank you very much for this valuable information. Well done on your efforts. We are fortunate to have you.
Thank u for showing the world a different way to live may God protect you and your love ones with fire water wind and earth God blessed
Engineer here...this is legit. Thank you for coming to my Ted talk.
bro wtf are you for real an engineer?
Over 40 years ago I designed and constructed a prototype machine similar to this. I was able to provide over 10 kw output using only 7.8 watts input once full stabilization was achieved. The incorporation of low density phlogiston as a laminar coolant along with phase reactive condensing fingulators was used to accelerate the necessary krindle -boost to the lagging field density. In addition, we used 12 monotonic charge encabulators to lengthen the toroidal force vectors which required continuous orthogonal axial tensor adjustment.
Imagine if you had a couple of these in an electric car, there wouldn't be a need for batteries, you just have a starter to start the 2 devices and some capacitors. No need to create pollution from battery production. No need to build powerplants to support the grid for charging. This is what the ev world needs.
If 12000W divided by 228 = 52.63A AC, there are some obvious questions. 1. 52.63A would require 4GA wire to handle the current, you are not using 4GA wire. 2. The outlet strips you are using to connect the heaters are designed for 15A each, not 25A.
3000watts is enough for house hold. but 12000W? its litterally overkill.
@@CarinoGamingStudio Hmmm... I'm using 46,000 watts in our house in Vancouver, Canada so I need more power! I will actually need a few MEGAWATTS but the company I consult to won't let me use one of their 10 Megawatt generators! SOme of us have BIG servers at home! V
@@StarGateSG7 i think your circuit breaker is higher than average family house.
@@CarinoGamingStudio Yup! We got 3-phase power at 480 Volts at 400 amps (or 192 Kilowatts). It's a tad excessive but nice to have. That said, even that is sometime NOT ENOUGH!
Eu aceito sua explicação, e compreendo sobre os meios de segurança e segrado. Mesmo assim, parabéns pelos projetos, e esperamos um dia ve-los funcionando em nossas residências, em empresas e até ajudando no desenvolvimento energético mundial.
Great video
What about endurance? Have you ran any endurance tests on this generator continuously for at least 24 hours to see how it performs and if there are any thermal issues with it running for long periods of time. How many hours do you think this generator can run for before failure powering a 12KW load like that? I would imagine the mean time before failure (MTBF) would be dependent on the motor specifications MTBF. If that is the case then 10,000 hours or more of continuous operation may be possible. In terms of energy output that would be 120,000 KWh if it ran for 10,000 hours continually powering a constant 12KW load. Very impressive demonstration.
Paylaşımlarınız için teşekkürler yeni videolarınızı bekliyor olacağım.
Good job..This is a laudable project. Can't wait to see it on display
Fantastic product. I have three questions. 1- Can I buy, and the price. ? 2- How is the output frequency and quality in armonics in relation of power consumption ? 3- how can I get one of 30 KVA ? Thanks for Your works.
tres apprécié merci.
Hidden technology thanks for sharing The information needs to get out there I wish I had the tools and the knowledge 2 order to build one
¡Saludos desde Ciudad Acarigua, Estado Portuguesa, Venezuela! 🫵😎😉🇻🇪😉😎🫵
can i use teflon for the rotor ?
I'd like to know the temperature of the transformer while you have the 13kW load!?
Thanks for the videos as I've watched them multiple times. Can you assist with the alloy rotor of how much aluminum : Silver?
Thank you universe
Why doesnt the RPM dip when you turned the heaters on? How do you prevent runaway?
1. Can you show a video where you measure the voltage on two MOT coils connected in parallel and what is that voltage, 2. On the diagram, you have drawn two coils for powering the motor which are connected in parallel and power the asynchronous induction motor, show the current that the motor draws when it is running. 3. You have drawn that the two coils for supplying the consumer are also connected in parallel. 4. Show us a voltmeter that shows the correct voltage on the MOT coils. 5. Show us with AC current clamps what current flows to the motor and what is the maximum current that flows through the two parallel windings to the 12kW consumers which are the heaters. 6. At a voltage of 220V AC, the current for 12kW is about 55 Amps, so it is not clear to me how you get a current of 55 Amps from two parallel coils that use magnetic induction. I hope you can explain my questions.
I know you guys are trying to make a miracle, can you make the exact parameters and dimensions and detail the materials needed to make the product? I'm trying to do the same thing as you guys and run on 220v power
Fabtastic !!!!!!!!!!!!!
Nice project perfectly good.
Hi! I'm so much impressed with your free energy module. Remain blessed as you dig even deeper to come out with the best for humanity. I have a question:- you say you have given special treatment to the alluminium alloy. What is that treatment? Can you explain the other materials or heat that you treated the aluminum alloy? Many thanks in advance for the response.
How warm will this get if used?
Would love to have one as we live in a caravan and powerd sites cost a fortune and the power bill too as will make traveling easy too thanks for showing us how it is done
Great idea that how much is cost?please
Thank you and I have a very important question. What is the continuous period that can be run while it is loaded, and does the temperature of the engine and the generating coils remain stable or normal, or does it heat up after certain hours and must be cooled or its frame is loosened or it works twenty-four hours continuously normally? Please answer and a thousand thanks
Why not use a three phase motor? Can the generated energy be used to run a three-phase motor? What is the ratio of aluminum to silver in the turntable and what type of permanent magnet is used?
❤❤❤❤❤
I'm confused. Where exactly does the pixie dust go to make it work. Also, my supply is running low, any idea where Tinkerbell is residing these days?
CAN YOU PROVIDE THE FIRST ROTOR WEIGHT AND DIMENSIONS?
If there are patents, approved patents are public. Please could you provide the patent codes and references to let people read them?
I love to see it! 😎 Great product and answers as well!
Try looking at 5.47. when he states NO POWER does the four gang extension have a spark at the switch,that is not possible without power.
👍..... Good for everything
Tolong perhatikan dengan saksama dimenit 15:03.. Dia melepaskan sumber listrik, sehingga membuat suara motor listrik tersebut berubah (kehilangan sumber energi).. Dimenit 15:05 dia memasukan kembali sumber listrik😢. Ini hanya sebuah trik😂😂😂
The cable supposedly supplying 12kw is at best 1.5mm copper which can hold 15 amps tops before it overheats, so i dont believe you are pulling 50-60 Amps /12KW@220V ac, not happening, it would burn up
it is not possible to multiply such power with such a small motor power at 220v because it has a weak torque even if it is at 380v, I have a pmg generator at home, the strongest magnets that are available in the latest types, which are made with the least possible resistance and the best power, the generator is 28kg, 20000w, but what does it have to make 2.5kw 380v to tighten it and for the next with every such performance resistance heat is generated
This unit produce 6kW per pair of coil. See the diagram.
👍👍👍👍👍 Chłopaki rozwalcie złodziej w wielkich koncernach Elektrycznych . ich Kłamstwa dobiegają końca. Rozpowszechnicie to urządzenie na cały świat powodzenia trzymam za waz kciuki . rozpocznie masową produkcie .!!
The "Argallium Alpha" Alloy is Simply Electroplated AlGa.... Silver plated, Aluminum-Gallium Alloy.... AlGa is brittle and weak, can be greatly strengthened through electroplating with silver.
Thanks ad so much.
Totally like this! As the man said, the majic comes from the rotor. Silver and aluminum alloy among other materials. My God. What is in that rotor? Very interesting.
It's made from Fairy dust and Unicorn farts.
ILUZJA 😊👍
it works
Du travail propre et minusieu.. Très professionnel!!!!!
merci beaucoup!!!🤗👍
Ini benar..hukum fisika dibuat untuk memonopoli manusia, yg ujung2 nya adalah uang..dengan perhitungan yg tepat sangat memungkinkan ini bisa terjadi..karena tanah saja bisa menyimpan listrik jika terkena air apalagi air hujan, memang di luar nalar..ttpi akan paham jika lebih detil memahami apa yg di jelaskan dalam AlQuran
good job ! Did you already made the 3 phase version ?
Hi Do you have any technology for sea water desalination with free energy or minimum cost? Appreciating your great work. Have a good day.
The 1-phase motor can be changed with a frequency converter. If I let it run at 30Hz, it will spin slower. If you spin it by hand, it is impossible to hit 50Hz. Explain how you achieve 50Hz. There is nothing in the scheme that would maintain 50Hz.
motor have 4 poles and generator have 4 poles... which means at around 1500rpm you will have 50Hz...but you are right something dont feel right here ???
@@IVANBELJIN the generator has 4 poles, where two coils are connected in series. But the motor is connected to only one of this series of coils. This means that the demand cannot be evenly distributed over 4 coils. Another socket is connected to a kind of series of coils. there, if you don't connect anything, the consumption is 0, and the first series of coils is the consumption of the entire motor. The fact that the motor has 4 poles does not mean that it has 4 coils. It definitely doesn't have 4 coils. It's the wrong comparison. It has several coils in the stator connected in series. From the number of coils in the stator, the RPM data at 50Hz is then developed. The number of coils determines the RPM at 50 Hz. That's why it's a synchronous motor. The more Hz you let it spin, the faster it spins.
Exelent machine very very good boy
Great Work how do we get hold of the drawings for the Liberty Engine Thank you
Very interesting but the only problem I see is that there is no ramp up on the engine when there is a load put on it. Turning on the the heaters or plugging in any device should cause the engine to ramp up to meet the extra power demand. It would make no sense for the system to remain at the same RPM no matter how many devices are plugged in since it would cause a runaway power increase that would burn everything out. Would you guys like to explain why the device only stays at one RPM?
Simple, it avoids Lenz's effect
Penso che il rotore e il motore sono solo un mezzo per prendere l'energia dall'ambiente di cui siamo pieni, Tesla lo ha fatto! con una antenna e un dispositivo prendeva energia dall'ambiente e faceva andare la sua macchina insieme al nipote se non ricordo male.
IF there was "No Eddie currents or magnetic breaking" Why does it then snap to a pole of a magnet? This indicates that there is drag - but maybe a reduced amount. The secret IS obviously behind the composition of that alloy the rotor is made of.
Great idea! But this DOES NOT illustrate a load of the potential of 20KW. I see four heater fans at 3KW being run. What I DO NOT EVER SEE is, for instance, a normal kitchen (cooker, washing machine, toaster, microwave, perhaps a clothes-drier, including lighting, AS A MINIMUM, being around 60Amps) being driven by one of these devices. Until I do see it I am going to say right here and now that this device, based on the cabling you have used, COULD NOT develop 20KW! 20KW represents at 230 Volts a current potential maximum of nearly 87 Amps - the cabling alone could not handle 87+Amps! It would fry!! The idea is great, BUT until I see REAL WORLD application of this device that can produce the stated load, this device is an exaggeration! I have no doubt that with mods to the cabling, the socket terminals (which are woefully inadequate), load and current protection, this device MIGHT produce sufficient to drive the kitchen devices as mentioned. There is a glaring lack of current data - Voltage and phase is all very well, but anyone SERIOUS would want to see the Current drawn by the electric heater fans to prove the 12 KW as expressed.
Sei cieco? a messo 4 lettori di assorbimento di carico uno per ogni riscaldatore e tutti assorbivano all'incirca 3 kilowatt l'uno. per la sezione dei cavi usati non reggerebbe ma l'esperimento e durato poco tempo non hanno avuto il tempo di scaldarsi o fondersi
superb guy....put a few of those in the shop...taxes paid.....i love it...
Micro wave coils are not easily gotten. Any data on the winding gauge/ohm specs? can solid steel be used for the iron coil core? - most transformers use stamped sheets as a laminate lock to hold the the coils securely with a shellack varnish. are yours epoxied in? What is the HP rating on the single phase motor? is it doubled for a 110v (USA) set up at the same wattage? Anything 3D printed versions - carbon fiber core? - I want or need the 10,000 watt + continuous to run a portable wire feed welder. I have a 20+ hp gas motor to currently run my generator head that runs the welder. I'd even like a 6000 watt setup for an RV hunting shack... Solar n batteries kinda suck there ... Got some N52's that are rated at 86 lbs pull. Small engine recoils n cups not a problem.. So maybe a 3 phase motor set up to be a trunk carried EV charger ? WOW! Lathe n mill not a problem.. Could build one and Video the results to ya bytlan is my user at yahoo.. If it really works this is outstanding..
As an electrical engineer myself I support the idea of this project. I am however concern how did you make sure that the voltage produced by the magnets to the motor is exactly what is required by the motor (220 V/ 228 V in your case)?(Impedance matching)..
Everything is perfectly calculated. It's not by chance
I would like to see your motor attached to a Tesla powerwall system. I would like to see if it charges the battery which of course would Power your home, charge your car... etc. It would be smart to have an electric start for the Liberty generator that would engage when the battery gets low.
Let me understand....you cannot produce that engine because his tecnology is protected but you can make a video explaining step by step how to assemble it?
Robert Murray Smith does a really great take down of the liberty engine. Basically: its not an energy creator only a converter.
Well yeah, that goes for basically everything! It's just we have abundant energy sources the powers that ought not be don't want us to use.
When you turned on the button on the extension cord at 05:46, it blinked because there was a charge of energy in the capacitor from previous launches until the moment the video was recorded. Right?
Is the motor adjusted or modified? from Thailand Thank.
Thank you for sharing your talents. This would be a wonderful combination with Tesla never have to stop and charge ever again. I would like to know if this would this be possible? And many more applications . I don't have a shop to build this, is this for sale?
I'm sorry, but we don't sell our prototypes. But we can share this video. In this way we will pressure energy companies to release this technology
Is the most important thing the motor that needs low leves of voltage/electricity to jump start?
Good luck man.
Bitte ein Langzeit (Endlos) Belastungstest in einem Livestream auf Twitch ! Grüße aus Germany
ja man das wäre nice, glaubst du das ding funktioniert ?
Hey chat! Listen to me. If this was true it would mean free energy for the whole world. No more nuclear power plants, no more solar or wind power, no more gas, coal or hydro power would be needed. Do you think the inventor of such a break trough would be making youtube videos about it?
Therefore, an alloy of aluminum and silver at a ratio of 45:55 will have a density of approximately 7grams per cubic centimeter (g/cm³). Total Volume: 1073.3cm3 Weight: 7.5kg
Hello sir. Can we use more magnet in the rotor section for power
Understanding that you cannot sell the product, do you offer the plans for sale?
Hello, the video editing is going very well, I see
GOLD that’s all i gotta say figure it out
@hiddentechnology would a copper, aluminum and silver rotor would work? (More copper beceause well i can't afford the silver) Does the density of the metal affect the eddy current and brake? Does the conductivity of silver makes a difference? And does the non-magnetism of the silver affect the field of the magnets?
Copper, nickel, zinc, aluminum. Silver is a code in the case. Research above combo
Kindly explain about the rotor made up of and what are the special treatment given to the rotor.
Mille BRAVO 👏👏👏
Greeting mr, with your permission, can you share detail the component for us to learn created the liberty engine. So your found can be the huge effects to the people. Thx a lot 🙏
Cool! It is revolution!
Cihazın yapımında kullandığınız metal ve diger parcaların tek tek özelliklerini yazarmısınız lütfen
Nice ✨🌟💫👍
how you feed your own (home) electricity from ?
magnetic field of the earth
How can I purchase one?
Az indukció értéke közelitően 1.5-----1.6T a mágnesek összeragasztásával, de elérheti az 1.7T is. N*B*l*v , N=menetszám, B=indukció T, l a vezető hosszúsága, v a sebesség. Frekvencia=p*n/60. p=pólusok száma, n=fordulatszám.
I got. A. Question would a bigger generator wild. Provide higher voltage energy or does it. Depend on. The. Numbers of magnets or coils ? the Second question can this device got a screen to see the out pout voltage and the rpm of the rotor ?
En el diagrama están dividida la conexión de las bobinas están dos por enchufes 🤗
why do the power strips light up, when you hit the switch. before the motor is even on?
Is this machine for Sale?
Do you sell this to people? Or the parts with instruction manual to assemble it?
Hello, the working frequency Hz of the power generator
50
I think you can also welding, wow, nice job 😁
Need one
The motor is emptied then a smaller motor is put inside with space for a battery, induction could also work for electricity. Thermodynamics are called laws of physics for a reason they are absolute.
Inside the "Membership", there you will find the answers to your questions. Those people made this video is a group of intellectuals and engineers that know how this principle works.
@@simplethings2410 I will never pay for science, especially papers that aren't even proper science. Fact is the claim of making energy from nothing is impossible no matter how advanced tech ever gets. Shame on you for such pathetic attempts at deception.
Lord Kelvin said, nothing can fly that is heavier than air.. That was the absolute science for dogmatic people of that time... You are the same today 😂
@derlon858 that's sub atomic scales, quantum physics are interesting, but most likely irrelevant.
@Gregi76 it isn't dogmatic, it is laws of physics with decades of scientific knowledge backing it with peer reviewing.
Fantastico