Easy and cheap. You don't need special tools or equipment. You can use common tools like large screwdriver and a jack.
Пікірлер
Who needs a machine when you've got this old school expert. 👍
@neilthorpe39149 ай бұрын
Thanks 😊
@Mylittleworkshop9 ай бұрын
I did this on 4 chrome spoke steel wheels and it went fine then i tried on 1 of 4 alu wheels i came to 3:07 it went fine until then now the alu wheel is scratched and look ugly and the tire is still stuck on, in some cases this works fine and other times not.
@ReodorF123 күн бұрын
For those of you who don’t know, if you have a sensor, make sure you take the tire off the rim from the opposite side of the valve stem
@cadenweichold44004 ай бұрын
This was very helpful wish me luck on mine 😅
@henryhooker32827 ай бұрын
I wish you all the best luck 🙂 👍
@Mylittleworkshop7 ай бұрын
@@Mylittleworkshop I took one tire off. I hated every minute of it lmao!
@henryhooker32827 ай бұрын
Yea because that was a totally safe way to use a jack
@animeboy93Ай бұрын
😢
@baldwinavendano930Ай бұрын
What are those pry bars you used?
@Retna823 күн бұрын
One example: www.amazon.com/s?k=BGS+1527&ref=nb_sb_noss
@Mylittleworkshop22 күн бұрын
does the tire have to be balanced?
@giulianaroccisano944211 ай бұрын
Acctually I didnt need to do that. I thought i have too but I felt no imbalance in the tires.
@Mylittleworkshop11 ай бұрын
😅 amazing all that hard work now you still have to take it down the garage to be balanced . Besides all the damage you did to your alloy wheels . Probably still be charged about the same . Let alone the cost of the tools you didn’t need if someone else did it properly. The tyres probably cost the same if you took it to the shop.. they buy in bulk you’re not going to be happy with 500 tyres in your garden shed.
@user-pc6zj4rc7s3 ай бұрын
All of the tools here are pretty staple and worth having for any number of purposes. I'm a believer in backup and emergency methods but of course you're right otherwise.
Who needs a machine when you've got this old school expert. 👍
Thanks 😊
I did this on 4 chrome spoke steel wheels and it went fine then i tried on 1 of 4 alu wheels i came to 3:07 it went fine until then now the alu wheel is scratched and look ugly and the tire is still stuck on, in some cases this works fine and other times not.
For those of you who don’t know, if you have a sensor, make sure you take the tire off the rim from the opposite side of the valve stem
This was very helpful wish me luck on mine 😅
I wish you all the best luck 🙂 👍
@@Mylittleworkshop I took one tire off. I hated every minute of it lmao!
Yea because that was a totally safe way to use a jack
😢
What are those pry bars you used?
One example: www.amazon.com/s?k=BGS+1527&ref=nb_sb_noss
does the tire have to be balanced?
Acctually I didnt need to do that. I thought i have too but I felt no imbalance in the tires.
😅 amazing all that hard work now you still have to take it down the garage to be balanced . Besides all the damage you did to your alloy wheels . Probably still be charged about the same . Let alone the cost of the tools you didn’t need if someone else did it properly. The tyres probably cost the same if you took it to the shop.. they buy in bulk you’re not going to be happy with 500 tyres in your garden shed.
All of the tools here are pretty staple and worth having for any number of purposes. I'm a believer in backup and emergency methods but of course you're right otherwise.