Restoration And Repair Of Old D24 ZS1115 Diesel Engine The Scrap Yard Restoration Tools
2023 ж. 28 Сәу.
951 832 Рет қаралды
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3mG3rQi
►Restorations Tools: bit.ly/3J5CVHS
© Copyright by Restorations Tools
I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement.
Great restoration job! That D24 ZS1115 engine went from scrap yard to star yard! 🌟
This guy did a pretty good job, he took a seized up engine and made it run. There were some things I would have done different but all in all good job@
The oil pickup tube needs to be positioned lower in the oil pan.
Awesome restoration! Just... maybe get a bigger socket for tapping in the bearings.
great video, torque wrench needed
Chào bạn nhiều lắm cũng chia sẻ với video này nhé 👍🙌👈
This is a good repair job, except the cleaning tools used were not shown. Wonderful.
A valiant effort but just another have-a-go chancer who could do with some mechanical mentoring. Yes it runs but the balancing shafts were not aligned correctly hence the vibrations. The way he handled the valves and bearings leaves a lot to be desired too.
So, the gears on the balance shafts, are not keyed, or marked?
@@davidhamm5626 if they were he didn't notice. I'm not convinced he knew what they were for - especially after witnessing him completely winding off the rocker adjuster locknuts. A bit of gear but no idea...
@@biomechanique6874 Okay, it has been a while since I have been in an engine, and never did a diesel.. ..
@@davidhamm5626some petrol/gasoline engines have balancing shafts too - v-twin motorcycles for an example.
I thought it was vibrating a bit more than usual.
Wow great restoration.
That is awesome how you restored that diesel engine to working order. It looks much better and it works like a charm as well. Excellent work.
😊+¹¹11
Semangat bos ku.
Aku suka Dongfeng 24 mantap.
GOOD. You are factory number one
На все руки от скуки😂.Вместо герметика надо было прокладки ставить,чтобы потом не капало.За трудолюбие конечно хвалю!а что это за белая субстанция,которую вы мололи?
41:59 the jumpscare diesel engine for "his" new life...🤣🤣 nice restoration.... 😁😁
👍 ok bos ku mantap.
The water leak, that showed when you started it, needs to be fixed. Maybe missed a gasket / seal of something?
some rust disolvant such as WD 40 or PB Blaster would be great for those rusty bolts and nuts. Still very good restoration. Thank you for posting.
Definitely an A for effort. Realistically I’m pretty sure it won’t last that long due to reusing critical components that strictly needed reconditioning. Well done though for making do and getting it running again 👍🏼
Great job and video. Thanks for sharing for sure
Bác nên làm cái máy bắn cát, chứ nhìn đánh cước xong nham nhở chối con mắt lắm
very nice job
The machine was full of rust and looked very dirty. But after it was restored... wow the results were truly extraordinary...
Good job on the repair. I have no idea what that cane like white things are or taste like.
good restore👍👍
A 10 star restoration in this video with many skills and an amazing masterpiece on this diesel from old to new working again😎😎😎♥️♥️♥️💙💙💙
Qqqq
冷却水最后好用纯净水这样不会产生水垢😂,这是中国的常州柴油机❤
Salam hadir bosqu
Excelent smart work ! 👍
Looks great, I’d have gone with an off white for the water and fuel tanks but that’s just me. I wish you would have shown the process of cleaning up the cylinder and whether you used new rings or not, but you made junk into a useful engine again. Really wish I could get my hands on one of those in my country
Mantap no sanguan leuwih ngeunah no enyooooy
Good jobs ❤
Bom trabalho amigos parabéns proficionalimo total, um abraço a todos
❤
@@user-lm9sf6le5n ไไป
Very nice restoration. It is incredible that you still can find parts for this old machine, like the head gasket. I am sure it would be impossible to find a head gasket for an old machine like this, where I live in Norway :). Excellent work, I am impressed
gaskets are easy to make
Gasket material can be bought and cut into whatever shape is needed.
Biarpun sudah lama di indonesia suku cadangnya masih mudah di cari.
Magnifico este hombre.
Nhớ làm kiềng nhớt
Me encanto tu trabajo.. Y tengo ganas de probar esos que prepararon y comieron.. Cómo se llama esa comida?
Great video! I recommend everyone to watch and enjoy the spectacle!!! Good luck, bro!!!👍👍👍
Another masterpiece! Such a pleasure to watch! Thank you 💕
Science. Đã tiệt chủng. WORLD 🇻🇳🇬🇧 ?
Nhóm kẻ đã tiêu diệt : LOÀI NGƯỜI. Chính nó : BẢNG IN : 500.000 vnđ 🇭🇲🇨🇦🇪🇺 and bảng in : SỔ ĐỎ : COMPANY. Vị trí : 🇻🇳. Asia ?
fantastic restoration another one back to life awesome job you guys are great thanks for shairing
Look fabulous as always. 👏👏
well done
Hay quá làm máy đúng bài
ពូកែធ្វើម៉ាសីុចាស់ទៅជាថ្មីបាន
Como sempre excelente video parabéns 👏👏👏👏
Olá, você sabe que tipo de alimento é esse que ele fez no final?
What is the food called?
I notice not a torque wrench in sight
cái bình nước bạn nên cho ốc lốc thì nó sẽ không han gỉ còn cái bánh đà sơn màu nhũ bạc thì giống kiểu hơn là sơn màu đỏ
great friend, follow along
PARABENS NOTA 1000
I see chrome sockets used ,there are black or dark colored sockets that are especially designed for impact use on HD impact tools . They are harder than normal chrome ones and are made harder and more robust than the others.
I am guessing that this motor is use out in the field for irrigation pumps
And for puffed rice 😊
شغل ممتاز
👏👏👏 Bom muito bom, manda metade desses biscoito pra cá, deixa de ser egoísta 🤣🤣🤣🤣🤣🤣🤣🤣
Ese equipo tenia todas sus piezas en buen estado, tenía poco uso, solo fue abandonado y las inclemencias del tiempo, lo maltrato. Pero en general buen trabajo.
so you had same winch in both places ,
Same electric hoist both ends of the collection. Bearings hammered in damaging balls and surface. No new piston rings ?. Good clean up though. Another video earning good money, well done lads.
😊😊😊😊
Ficou com vazamento!
Reusing bearings is a bad practice. They do a lot of work in making engines run as smoothly as possible, and loose their tolerance from all that hard work, and get sloppy. As dirty as that engine was inside, that engine needs new bearings to make it last longer.
What is this food, what is it made of, and how is it made
Pemasangan piston terbalik !!! 😂
Yang saya sayangkan pistonnya terbalik,
Cứu : LOÀI NGƯỜI = MONEY : WHO 🇻🇳 ?
Tengo una duda es verdad que tiene su punto en la parte que lleva la bomba de diesel . O lo des armo nomas sin problema
Ok indonesa❤
good
The engine will be kept for a few months and then they will dirty it and throw it on the road and as always the title will say "I found a diesel engine in a river and I restored it". Most of these restoration videos made in vietnam have this same type of script.
good job
Cangih full.
Tienes que arreglar esa fuga de agua, puede pasarse al motor y provocar problemas de desvielo
Seharusnya alat yg sudah seharusnya diganti ya gantilah. Seperti fiber governor. Dan pemasangan piston sepertinya terbalik. Itu masih ada yg bocor entah solar atau air. 😅
I suppose this engine was found in one of the pyramids, right? Or some Inca ruins maybe?
how does cooling system work
is this engine is China engine? Looking good! How old this?
I think you might find part difficult to get quick and to be fair given that it’s a single it’s not running fast or hard so stressing the whole thing is really difficult
NICE RESTORATION!
What are you making bro.???
❤ super❤
Like made corn or puffed rice, does anyone know the right one? The machine that turns rice into chips is more interesting than the restored one. Please give information about this machine.
:“。二0(?
Neste país só tem coisa deteriorada só vejo restauração de coisa que aqui não ficam abandonada por nada
nice
আছি আছি 🤚🤚🤚🇧🇩🇧🇩
❤❤❤❤ thx
What are they grinding at the end?
Most important question!
Is it bad to close the ball like that?
A cuanto lo calibras los balancines
Dong the anh huong bi
Tengo un mini dumper y su motor es similar
What are you making?
What was being made?
У меня в России есть такой двиготель не работает лет десять хотел бы сделать но боюсь не смогу найти не него запчасти в России
Это типа восстановление, что с двигателя вода вытекает
Did anyone notice that they used the exact same hoist to load and unload the engine? Did they roll the hoist from one location to the other? I don't mean the same type of hoist, but the exact same hoist. Stop the video at 1:10 and then again at 2:32. Look at the marks on the lower frame piece and at the bottom of the upright pole along with several other scuffs and marks. Maybe they only needed to move the engine a short distance. Just seems kind of odd.
From one end of the garden to the other ?
im thinkimg that hoist would be difficult to move loaded with that large lump of iron on those little wheels on dirt...
@@CATech1138 Yes, of course. But it makes me think this whole thing was faked.
สภาพหัวฉีดมันไม่ไหวแล้วเจ้านาย
Love it .
El pistón lo pusiste al revés
Excellent work, as ever what a pleasure to watch! Thank you very much.
¿Que es eso blanco?
Da para ver que voce intende da proficao e desinpenha um bom tra balho.parabens.
What was that engine leaking onto the ground? Water? Fuel? I wouldn't have stood within fifty yards/meters of that thing.
Both.
Water that was spilled on top while filling the coolant tank.