Lets be honest here. The amount of skill that it took to hold the camera, watch the welder, and hit the arc interrupt button at the same is phenomenal. ;)
@travisk5589 Жыл бұрын
I've seen it done by a team of welders in the old days. It's probably a lot cheaper this way.
@jeptoungrit9000 Жыл бұрын
Americans, do you know that the Ukrainian army commits war crimes? And your old Biden sends them weapons and you become an accomplice to their crimes
@Odessa-2maya-2014 Жыл бұрын
Such a weird comment?
@robmacdermott3975 Жыл бұрын
@@robmacdermott3975 You seem like a lot of fun to be around
@travisk5589 Жыл бұрын
@@robmacdermott3975 what a weird way to talk about your own comment
@HaydenMadeEm Жыл бұрын
It would be really interesting to see you actually perform all the measurements step-by-step, and setting up the line bore
@billyword7428 Жыл бұрын
Watch CEE Australia He goes into that. It is a different make line borer.
@jayreiter268 Жыл бұрын
@@ypaulbrown The fellow was asking about how the setup and dimension measurement was done, You are correct Kurtis and Karen have the time to show this in a shop environment. I was not being critical of Greg's work. It is understood one man field work is different. Regards, Jay
@jayreiter268 Жыл бұрын
@@jayreiter268 I had a hard time wording my comment , it was not meant to slam you, I am sorry about that.....and was actually a compliment to you for mentioning IC weld and Kurtis/Karen...and also letting the comment know the difference in recording styles.....I hope this makes sense, best regards, Paul
@ypaulbrown Жыл бұрын
@@ypaulbrown I understand.
@jayreiter268 Жыл бұрын
@@jayreiter268 thank you....Paul
@ypaulbrown Жыл бұрын
Never seen this channel. Never heard of this line of work. Didn’t even realize those joints on the equipment needed this kind of maintenance. Video just popped up in my recommended feed and I’ve been casually following along for about a half hour now.
@Mecharuva Жыл бұрын
That level of skill has a value that is almost unimaginable. You guys blow me away with what you do. My brother is a shop superintendent at large construction outfit up here in Washington state, watching him fabricate stuff is like watching a magician to someone like me.
@humblepie1017 Жыл бұрын
Americans, do you know that the Ukrainian army commits war crimes? And your old Biden sends them weapons and you become an accomplice to their crimes
@Odessa-2maya-2014 Жыл бұрын
less skill than it used to take
@shaynejenkins446 Жыл бұрын
Let’s not be hyperbolic. This skill Is not unimaginable. There are soooooo many things in this industry that makes This look like a Job you’d give the new guy. And
@jamesbizs11 ай бұрын
What would be the time cost difference to set the line bore setup up then gouge the tube off and then set the new tube up with the grease connection done right and then weld and then line bore?
@bayareaartist9995 ай бұрын
Man that line boring machine is sweet. Pretty impressive how it filled the egg shape on the bottom.
@stevensonmcneill1350 Жыл бұрын
thats insane. I used to be a commercial landscape foreman and would see you guys come out and work on busted excavators and backhoes etc. I never did get to see what was going on up close though.
@breakthecycle5238 Жыл бұрын
Профессионал с большой буквы и с золотыми руками!!!!
@sergbf7 ай бұрын
I work twelve-hour shifts TiG welding aircraft parts so I feel your pain on those long ass days! That Pie mode welding is pretty slick. I've been dying to attend a Fabtech Convention so I can keep up with all the new tech and processes. well done Sir!!
@mcpheonixx Жыл бұрын
I would love your job
@vulkunvision Жыл бұрын
That is the first time I have seen that sort of work from the welder in line boring. That "pie" mode is a really handy function, they rarely wear out evenly!
@jackdawg4579 Жыл бұрын
That turned out nice man, you have heavily invested into yourself and your craft and it shows on these type of repairs.👍
@chadlassiter6380 Жыл бұрын
Absolutely awesome, I’ve been welding on heavy mining machinery for almost 20yrs and weld those bores by hand and never knew a welder existed for that. (I’ve Probably been living under a rock) this is beautiful to watch. Thank you for your artistry.
@WeldMke Жыл бұрын
Hand welding those bores....Respect man!
@toast47624 Жыл бұрын
@@toast47624 Thanks. it’s a pain, i attached a broom stick to my whip and extended the trigger wires. Tough on the forearms.
@WeldMke Жыл бұрын
Unbelievable job well done
@donaldmendes184 Жыл бұрын
I'd like to see that.
@iguanapete3809 Жыл бұрын
Slick repair! Man your making your way up in the rankings of welding on KZhead! It's crazy how much people watch you just do your job! There's barley anybody out there uploading stuff like this so definately keep uploading!
@JTwelder. Жыл бұрын
I suppose you've seen Cutting Edge Engineering?
@ThePaulv12 Жыл бұрын
Not that I’m a welder, but I do aerial construction and I’ve always wondered if people would just watch me do my job lol
@josh1234857 Жыл бұрын
@@josh1234857 i would, ive never seen anyone do it i guess
@Your_nearest_toyota_dealer Жыл бұрын
@@Your_nearest_toyota_dealer well, time to get a go pro I guess lol
@josh1234857 Жыл бұрын
@@josh1234857 you can try to just use your phone at first if its fairly secure
@Your_nearest_toyota_dealer Жыл бұрын
WOW......DOUBLE WOW! Saw your Page mentioned on a post mentioning four other folks I follow on here - WOW. I can easily see how the post mentions you. Been a welder/fabricator for over 30 years and thoroughly enjoy watching the younger generation and following up with modern techniques to "GET 'ER DONE"!!!! Really like that facing fixture you have - sweet!!! Like having a lathe for something you can't stick in one! I hope you showed your customer this video so he can see for himself the excellent workmanship he's paying for.
@bill8by5 Жыл бұрын
I don't own or operate any heavy machinery so it is unlikely I will ever need to know this is even possible, but, I can say with certainty, I can appreciate the amount of skill this takes. This is an invaluable skill set.
@NainKaigo Жыл бұрын
This Cat was used to build the basement of your house or building. So you indirectly already used it.
@benoit-pierredemaine382410 ай бұрын
Had no idea that it was even possible to rebuild one of those. That man is a Master of his craft. Great FN JOB!!!
@MOONRAK3R2310 ай бұрын
I appreciate when you answer hypothetical questions as in how to line up bar near the beginning. Thanks
@Shifffyy9 ай бұрын
I like the safety conciseness at 40:06. I imagine that press is capable of some serious pressure.
@92Jdmsupra Жыл бұрын
That's what you call field engineering at its best!!!! Awesome work there! Can't wait for the next.
@augienajera642 Жыл бұрын
Amazing work, job, you are very skilled, your customers don't realize how good they have having you their!!
@ronaldbrosius748811 ай бұрын
Nice feature with the back and forth fill up, that bore looked like a railroad tunnel, I expected that you would have to bore it out to the biggest diameter and weld it back to spec, but the vally filling helped a lot! Thx for showing! 👍👍👍
@horstszibulski19 Жыл бұрын
I watch CEE AUS do this kind of work in a shop and i find it equally interesting seeing how this sort of work is done in the field.
@anonymouscoward7559 Жыл бұрын
That's almost the exact line bore I use @ work. It's in a shop so we use the BB5000. It took me a few hours to get to know the machine years ago and it's super cake doing anything nowadays. Nice work, thanks very much for sharing. I do a lot of small articulating dock crane work for the fishing industry. Those guys beat those cranes to death before they say 'Uh...we better fix that.'
@JustMike2791 Жыл бұрын
So they don't like preventative maintenance downtime? Let's put it off and have more downtime for longer later on. Short term foolish.
@gorillaau Жыл бұрын
Love that turnaround welding machine 🤩🧑🏭 Merci pour la vidéo 🇫🇷
@sucre9995Ай бұрын
Thank you for the explanations, I'm looking to get into line boring and trying to soak up every bit of knowledge possible. You make a great KZhead mentor.
@brent8922 Жыл бұрын
this work looks complicated enough but to be doing it in the field and not in a workshop is very impressive
@john9291 Жыл бұрын
Your work is top notch and very reasonably priced. Very impressive.
@bt9653 Жыл бұрын
How much was it?
@BRENT3143945 Жыл бұрын
We did use someone like you at my job saved us alot of money to repair some errors ,so hope besiness owners will see how very useful you guys are,keep doing what you do sir
@kyndred2008 Жыл бұрын
Your knowledge of the proper tools, such as the line borer, and skillset in using them properly in field conditions, and obtaining the precision to do such quality work is truly outstanding! You truly have my respect, and I want to express my sincere gratitude to you for making these videos! As a fairly new welder, out of welding school a year, I am learning so much from your expertise….thank you!
@woodartist202110 ай бұрын
I appreciate your excellent discussion and explanations of how and why you are doing what you are doing. The Climax rig is impressive. The only line boring I've done is engine block boring. This is a different caliber! Thanks very much and greetings from Germany.
@BruceBoschek Жыл бұрын
Impressive. It's like 3D printing with metal. Those shavings at 32:40 are a beautiful blue color.
@Telogor Жыл бұрын
It’s not like 3D printing with metal… it’s literally 3D printing with metal. It’s additive manufacturing. Stuff like this has been around as long if not longer than 3D printing. This is the daddy of modern 3D printing. Also, they have actual metal 3D printing in the same format that you’re imagining.
@jamesbizs11 ай бұрын
Your a very talented man you know your trade I'd give you at a boy's all day long from a old retired welder thanks for the videos
@peterparr45168 ай бұрын
Top tier skills. Way more therapeutic to watch than you'd think too. Thank you.
@consumerofstuff785410 ай бұрын
There is so much more to this than people realize. The weld build up you don't want to be excessive because of machining time. And its best that finish isn't between layer's so peeling of the weld doesn't happen. Great job!!
@exodustwelve2044 Жыл бұрын
I would have thought that you would have to treat the metal somehow if you did something like this. This is fine the way it is, no heat treating or anything like that???
@mitchweber7868 Жыл бұрын
@@mitchweber7868I don’t think you would need to per se. Since its a continuous weld surface on a single parent material. Plus there are bushings on top.
@jimyeats10 ай бұрын
Amazing work! Your equipment is spotless too, not easy to do out in the field.
@johnjamesterbeek Жыл бұрын
that wasn't a bor watching you boring the apatur... what a beautiful peace of equipment and very well done sir. 👍
@knightstemplar2437 Жыл бұрын
Excellent video! I never knew those type repair machines existed! Fascinating to watch, and a great outcome.
@jamestamu83 Жыл бұрын
13:00. that is cool how the machine uses cams to control the amount of weld distance in PIE cut... .I thought it might be controlled by computer.......great looking job Greg......
@ypaulbrown Жыл бұрын
This is a really good video that the guys that hate paying for repairs and should see why it cost so much to repair . lots cheaper to replace a bushing and pin then wait till is half way through a arm lol. Great work cheers from Australia.
@dougobrien2840 Жыл бұрын
They see the machine making a couple thousand a day and just don’t care.
@OFW Жыл бұрын
@@OFW Doesn't that mean it's losing a couple thousand a day just sitting there doing nothing as you're repairing it?
@BrokenLifeCycle Жыл бұрын
@@BrokenLifeCycle yes it does.
@OFW Жыл бұрын
Damn. This would pefectly combine my love of mechanics, machining and heavy equipment operation.....
@albertashford724511 ай бұрын
Don't know what you get an hr but your work an the precision you do is well worth it ! 👍👍
@victorjeffers1993 Жыл бұрын
That was certainly worn!, quite a difficult operation to maintain lubrication points. Impressive PI or PIE feature and weld interrupt. Great work and video, thanks for sharing. Regards John
@bostedtap8399 Жыл бұрын
I think I’d pack those bushings the day before in dry ice so they would shrink then just keep them in a cooler and bring them with you.
@sawboneiomc8809 Жыл бұрын
I agree we used to make the bushing an interference fit and shrink them in with liquid nitrogen. BUT you do have to get the limits and fits correct...
@chisdalton9652 Жыл бұрын
Cat bushings do not shrink even in nitrogen. It makes no sense but it's true
@Brandon-cz3ny Жыл бұрын
I like this style of boring system that you have. It looks light weight and very useful, un like the system that a person is using in Australia.Good job and video!
@user-zl3wl9rs6s6 ай бұрын
His system is a little faster to setup but my system is more versatile. Either way as long as the job gets done.
@OFW6 ай бұрын
That is some coooool chit right there, that welder going back n forth 🥽🥽🥽🥽👍👍👍👍
@planeiron241 Жыл бұрын
You have some very nice equipment brother. Must have worked hard to get those.
@johnc6343 Жыл бұрын
Excellent work. 👍 That looks brand new.
@EricDalton1910 Жыл бұрын
I don’t what you’re getting paid, but you should double it. Incredible amount of know how,logic and grit to do this work.
@filmchild78 Жыл бұрын
That's a really nice feature, perfect for that situation. Idk there's something kinda hypnotic about watching that torch going back and forth. The interrupt button is another handy feature, it's a pretty sweet setup. Climax.
@deepwinter77 Жыл бұрын
I've watched all of your videos and taken pointers into my own welding job, real amazing stuff you do man. Truck tour when?? 😅
@BowHunterMadness Жыл бұрын
Mint job,that line boring machine is some kit you got there,stay safe.
@roydawson4882 Жыл бұрын
Інформативне і дуже повчальне відео👍👍👍
@user-nj1lq4jl6r8 ай бұрын
Thanks for your videos! Learn a lot watching them.
@jaymarshall7632 Жыл бұрын
That is a very clever line welder, what with filling the "out of round" bottom of the hole and also being able to jump over the grease holes. The machine designers certainly thought about it. We are definitely an intelligent species. Great video.
@Designer22 Жыл бұрын
I started watching your videos a few days ago when one poped up as a suggestion. It was you welding an earth mover which had developed a serious fuel leak deep inside one of the machine's arms. You cut out several large plates just to get to the leak and despite all the flames you successfully welded the many cracks, splits and replacement panels to seal up the tank once and for all. Brilliant job and much skill involved. I was impressed by the shear volume of different situations and problems you dealt with on site and in your workshop. I watched a few videos and subscribed because you do a lot more than set a machine to do your welding for you. I've watched three videos on line boring and this one is by far the most not just interesting but skilful because I had only seen complete revolution welding, but in this one, the borer welded the bottom part first bringing it to a level where full revolution welding was possible. That matchine is bloody marvellous. Your apprentice must be in his element because I would be if I were in his shoes.
@boogiewoogiebubbleboy28779 ай бұрын
That smart welding fixture must have cost an absolute fortune...
@douro20 Жыл бұрын
It's amazing how all those layers of weld come up like fresh forged steel once machined!
@adrianpilbrow Жыл бұрын
looks like 3d print
@Toei-Rei Жыл бұрын
Steel is pretty unique as metals go, it’s metallurgy/strength doesn’t get messed up as badly by repeated weld passes as other metals, which helps make repairs like this viable.
@Jonathan_Doe_ Жыл бұрын
Always good to be busy! You hate the days when your getting interrupted all the time but that's when you know your making 🤑🤑🤑
@sparksmobilerepair4025 Жыл бұрын
Great arc shots in this one Greg!
@seantatham9960 Жыл бұрын
Really impressive work. Thanks for putting this content out.
@andrewl5065 Жыл бұрын
I’m impressed with the Climax machine, does a great job and looks like it has come as a kit. The big blue box visible in the background. Almost all the lineboring equipment I see here in Australia is 3ph or homemade single phase. I note yours is hydraulic, Greg , I’d like to know why you selected hydraulic as the rotational force. Did the Climax come with its own power pack or did you adapt something else suitable? Regardless, it is a very tidy piece of equipment and does a good job. You’re a hand man to have around!
@sonofadutchman9315 Жыл бұрын
The base Climax kit comes with a 120v electric motor. It’s okay, but the hydraulic has massive amounts of torque. Climax sells all the stuff to make it hydraulic.
@OFW Жыл бұрын
Moral of this story: Don't let holes get that sloppy.
@jimsvideos7201 Жыл бұрын
I have to say you do fantastic work, I have heard of line boring and did not know how special it is. I don't do your sort of welding ,I do mostly regular fab work , not on heavy equipment. On seeing your work I wish I had know of it sooner, great work your are a master welder.
@bruced1429 Жыл бұрын
Great channel! And fantastic work. The bill for this job should surely open the contractor's eyes to the savings of some timely.maintenance!
@chrisbryden8102 Жыл бұрын
Is the new metal that was added back by layering welds as strong as the original metal that was worn down from heavy use? Or will there be flaws in the new metal at a microscopic level that human eyes can't see unassisted that will result in this having to be done again sooner than it would on a new machine? I'm currently at my 3rd job related to metal fab, but I've only gotten to see welds related to sheet metal so I'd love to know the science behind this from anyone that knows!
@Fuzzy336 Жыл бұрын
The weld is the same as the parent material. I don’t care how good anyone is, welding up a bore like this there will be flaws and small imperfections in the weld. But that isn’t really a big deal because the bushing is taking the load and it’s spread evenly over the bore.
@OFW Жыл бұрын
@@OFW that makes sense! thank you for the explanation!
@Fuzzy336 Жыл бұрын
Speaking of being wet with 3 phase; a colleague of mine once briefly held that stuff during a work accident. Company sent him somewhere alone in the middle of the night like idiots. He was lucky to survive that and we couldn't believe that happened because he called me right after. My home was close to the shop we worked at and I almost laughed when I saw him. He was straight out of cartoons, his hair straight up, skin slightly burned here and there and the soles of his shoes were exploded, nearly gone. At that point I realized he was slightly delirious and understood why he was so calm on the phone. Luckily he ended up being alright. Remember boys, if ya don't know what it is, it's buzz!
@mistaowickkuh6249 Жыл бұрын
How many days in the hospital? Sounds like a big bang, rather than a buzz. Ears might have been ringing also.
@gorillaau Жыл бұрын
@@gorillaau it was the only person I've known to not only survive such a shock but also without any major damage. Something must have gone seriously right with his situation aside from being there at night, without rest, dancing with satan. I quit that shithole after a couple of weeks but as far as I know he was ok. Didn't know if he sued and how did it go, I hope he did and ended up shutting down that shop. They were closed after less than a year anyway. I wasn't surprised because the management was a bunch of shitheads
@mistaowickkuh6249 Жыл бұрын
@@mistaowickkuh6249 Probably everyone else in the trenches got out after you did. Walk out before you are carried out in a body bag.
@gorillaau Жыл бұрын
Great filming. That was a complex repair, well done.
@longcaster Жыл бұрын
Awesome work man. I’m a heavy mechanic and I really like watching this kind of work done. I try to stay out of the guys way that does this work for us when he is busy.
@everytoolashammer9427 Жыл бұрын
I can only imagine how much a specialized, high quality instrument/set like that bore lathe costs. I mean, I get it, sometimes for your trade you NEED to have certain equipment so the price isn't as big of a deal breaker as it is for any random dick like me, but damn. That is an impressive piece of specialized kit. I'm sure it pays for itself pretty quick so long as you can line up the work with it, even if its worth more than I make in a year. Beautiful work, thanks for recording this and sharing it with us boss.
@davidregal6831 Жыл бұрын
being that far gone would it be better just to replace the hole end? or is that a lot more work
@almoncrandall9066 Жыл бұрын
It’s a decent amount of work and the end piece is very expensive.
@OFW Жыл бұрын
@@OFW I kind of thought that, but thanks for answering my question
@almoncrandall9066 Жыл бұрын
Never seen these tools or this process before and it has to be the highlight of my week seeing your skills in action. Love learning and specialized tools in the hands of skilled workers and this hit all the nails on the head.
@momomunsta8887 Жыл бұрын
good morning from hurricane infested Orlando, Florida.....cheers, Paul
@ypaulbrown Жыл бұрын
awesome work! puts into perspective how much work could have been avoided with proper greasing and pre-work inspections lol!
@BIGBADBOY9112 Жыл бұрын
Hey mate, surely that line boring machine is worth every cent that it costs. Helped you turn a mushed up piece of machinery back to near new. Well done.
@petermarsh4993 Жыл бұрын
That was fascinating, great camera work and good explanations of what you're doing and why.
@garykristjanson4689 Жыл бұрын
Можно только позавидовать технологиям, инструменту и оснастке. Высший класс!!!
@user-zz4vd8yw8x Жыл бұрын
Great repair and work! It will be a happy customer! Video is well made as well!!
@PhotoArtBrussels Жыл бұрын
Love the sound of the sleeve going in. Boink!
@brianpearl7504 Жыл бұрын
the amount of skill, work and time that is neccessary to fix this, is insane
@TheKrogon Жыл бұрын
Amazing work! 💪🏼
@roberthawks7711 Жыл бұрын
I have a multimatic 220 and I love that welder. Absolutely amazing machine. Amazing work, Great Job!!
@Nonyabiz69 Жыл бұрын
Impressive work. Thanks for filming
@frfrpr Жыл бұрын
Master Craftsman at work. Beautiful!
@damonried1720 Жыл бұрын
You are using the technology available (which is practical) to its best advantage. Well done.
@chucktaylor4958 Жыл бұрын
Is it strange to be hypnotised by timelapses of machining? Pressing in those sleeves, wow !! So 20 * US$650 + parts; cheaper than a replacement no doubt.
@guyclk10 ай бұрын
Very nifty feature that pi partial weld!
@therealspixycat Жыл бұрын
Very cool and educational to see, I saw the job at hand and thought to myself ''Man how are you going to fix that?'' and I was not disappointed by the process.
@Saul1337Ftw Жыл бұрын
I love finding repair videos like this. I didn't even know this was a thing and it's very interesting!
@one_rich Жыл бұрын
When he was pressing in that bushing, in know the threads on that nut were screaming! Great video!
@squerlyq Жыл бұрын
Interesting to see how others do the same kind of repairs. I did one of these in pretty similar shape. Thankfully they had the dog bone pins pulled to do a true bar to bar setup. I always weld up stand offs to put the big bearings on to keep the chatter down and take bigger cuts. I always do all the welding by hand with bigger wire too. Took about a 20 hour shift to knock it out from skimming out old bearings with air arc fixing grease lines and build up faces.
@kkaunitz3700 Жыл бұрын
Big refit huh? That pie weld option is cool on your climax bore tool. Thanks
@micmike Жыл бұрын
Great Video sir love your truck 👍
@heavymachinery2843 Жыл бұрын
This is one of the greatest things I've ever witnessed. Super impressive!
@ourlifeinwyoming4654 Жыл бұрын
Amazing what a small amount of us humans can do, thank you for documenting your work it is much appreciated.
@Asomesauc Жыл бұрын
I do the same type of machine repair, but on MUCH smaller machinery. At 41:25 I was thinking, "man. I cant imagine pressing in a component so big that even a torch and hammer couldn't save me". But then Mr. Hammer showed up! and then Mr. Torch! Good to know the basics still apply to the big boy jobs. I guess that means the big machine repair guys also freeze components for interference fits, but it's probably a lot fancier than my upside-down cans of compressed air i bought at costco haha.
@rozero123459gnh Жыл бұрын
Whoever was doing that work is a real craftsman.
@ericsmcmahan11 ай бұрын
in the field. savage. i've only ever done things in well equipped shops but the lure of doing stuff in open air looks sick.
@skraminc Жыл бұрын
Hermoso equipo de trabajo. Saludos
@nelsoonmatos59809 ай бұрын
Absolutely amazing!! 👌🏼
@thegoodthebadandtheugly9920 Жыл бұрын
Хороший level оборудования и понимая процесса. Добро.
@DONSKO1 Жыл бұрын
These pops when the new sleeve moves in after tons of force were present are pure satisfaction
Lets be honest here. The amount of skill that it took to hold the camera, watch the welder, and hit the arc interrupt button at the same is phenomenal. ;)
I've seen it done by a team of welders in the old days. It's probably a lot cheaper this way.
Americans, do you know that the Ukrainian army commits war crimes? And your old Biden sends them weapons and you become an accomplice to their crimes
Such a weird comment?
@@robmacdermott3975 You seem like a lot of fun to be around
@@robmacdermott3975 what a weird way to talk about your own comment
It would be really interesting to see you actually perform all the measurements step-by-step, and setting up the line bore
Watch CEE Australia He goes into that. It is a different make line borer.
@@ypaulbrown The fellow was asking about how the setup and dimension measurement was done, You are correct Kurtis and Karen have the time to show this in a shop environment. I was not being critical of Greg's work. It is understood one man field work is different. Regards, Jay
@@jayreiter268 I had a hard time wording my comment , it was not meant to slam you, I am sorry about that.....and was actually a compliment to you for mentioning IC weld and Kurtis/Karen...and also letting the comment know the difference in recording styles.....I hope this makes sense, best regards, Paul
@@ypaulbrown I understand.
@@jayreiter268 thank you....Paul
Never seen this channel. Never heard of this line of work. Didn’t even realize those joints on the equipment needed this kind of maintenance. Video just popped up in my recommended feed and I’ve been casually following along for about a half hour now.
That level of skill has a value that is almost unimaginable. You guys blow me away with what you do. My brother is a shop superintendent at large construction outfit up here in Washington state, watching him fabricate stuff is like watching a magician to someone like me.
Americans, do you know that the Ukrainian army commits war crimes? And your old Biden sends them weapons and you become an accomplice to their crimes
less skill than it used to take
Let’s not be hyperbolic. This skill Is not unimaginable. There are soooooo many things in this industry that makes This look like a Job you’d give the new guy. And
What would be the time cost difference to set the line bore setup up then gouge the tube off and then set the new tube up with the grease connection done right and then weld and then line bore?
Man that line boring machine is sweet. Pretty impressive how it filled the egg shape on the bottom.
thats insane. I used to be a commercial landscape foreman and would see you guys come out and work on busted excavators and backhoes etc. I never did get to see what was going on up close though.
Профессионал с большой буквы и с золотыми руками!!!!
I work twelve-hour shifts TiG welding aircraft parts so I feel your pain on those long ass days! That Pie mode welding is pretty slick. I've been dying to attend a Fabtech Convention so I can keep up with all the new tech and processes. well done Sir!!
I would love your job
That is the first time I have seen that sort of work from the welder in line boring. That "pie" mode is a really handy function, they rarely wear out evenly!
That turned out nice man, you have heavily invested into yourself and your craft and it shows on these type of repairs.👍
Absolutely awesome, I’ve been welding on heavy mining machinery for almost 20yrs and weld those bores by hand and never knew a welder existed for that. (I’ve Probably been living under a rock) this is beautiful to watch. Thank you for your artistry.
Hand welding those bores....Respect man!
@@toast47624 Thanks. it’s a pain, i attached a broom stick to my whip and extended the trigger wires. Tough on the forearms.
Unbelievable job well done
I'd like to see that.
Slick repair! Man your making your way up in the rankings of welding on KZhead! It's crazy how much people watch you just do your job! There's barley anybody out there uploading stuff like this so definately keep uploading!
I suppose you've seen Cutting Edge Engineering?
Not that I’m a welder, but I do aerial construction and I’ve always wondered if people would just watch me do my job lol
@@josh1234857 i would, ive never seen anyone do it i guess
@@Your_nearest_toyota_dealer well, time to get a go pro I guess lol
@@josh1234857 you can try to just use your phone at first if its fairly secure
WOW......DOUBLE WOW! Saw your Page mentioned on a post mentioning four other folks I follow on here - WOW. I can easily see how the post mentions you. Been a welder/fabricator for over 30 years and thoroughly enjoy watching the younger generation and following up with modern techniques to "GET 'ER DONE"!!!! Really like that facing fixture you have - sweet!!! Like having a lathe for something you can't stick in one! I hope you showed your customer this video so he can see for himself the excellent workmanship he's paying for.
I don't own or operate any heavy machinery so it is unlikely I will ever need to know this is even possible, but, I can say with certainty, I can appreciate the amount of skill this takes. This is an invaluable skill set.
This Cat was used to build the basement of your house or building. So you indirectly already used it.
Had no idea that it was even possible to rebuild one of those. That man is a Master of his craft. Great FN JOB!!!
I appreciate when you answer hypothetical questions as in how to line up bar near the beginning. Thanks
I like the safety conciseness at 40:06. I imagine that press is capable of some serious pressure.
That's what you call field engineering at its best!!!! Awesome work there! Can't wait for the next.
Amazing work, job, you are very skilled, your customers don't realize how good they have having you their!!
Nice feature with the back and forth fill up, that bore looked like a railroad tunnel, I expected that you would have to bore it out to the biggest diameter and weld it back to spec, but the vally filling helped a lot! Thx for showing! 👍👍👍
I watch CEE AUS do this kind of work in a shop and i find it equally interesting seeing how this sort of work is done in the field.
That's almost the exact line bore I use @ work. It's in a shop so we use the BB5000. It took me a few hours to get to know the machine years ago and it's super cake doing anything nowadays. Nice work, thanks very much for sharing. I do a lot of small articulating dock crane work for the fishing industry. Those guys beat those cranes to death before they say 'Uh...we better fix that.'
So they don't like preventative maintenance downtime? Let's put it off and have more downtime for longer later on. Short term foolish.
Love that turnaround welding machine 🤩🧑🏭 Merci pour la vidéo 🇫🇷
Thank you for the explanations, I'm looking to get into line boring and trying to soak up every bit of knowledge possible. You make a great KZhead mentor.
this work looks complicated enough but to be doing it in the field and not in a workshop is very impressive
Your work is top notch and very reasonably priced. Very impressive.
How much was it?
We did use someone like you at my job saved us alot of money to repair some errors ,so hope besiness owners will see how very useful you guys are,keep doing what you do sir
Your knowledge of the proper tools, such as the line borer, and skillset in using them properly in field conditions, and obtaining the precision to do such quality work is truly outstanding! You truly have my respect, and I want to express my sincere gratitude to you for making these videos! As a fairly new welder, out of welding school a year, I am learning so much from your expertise….thank you!
I appreciate your excellent discussion and explanations of how and why you are doing what you are doing. The Climax rig is impressive. The only line boring I've done is engine block boring. This is a different caliber! Thanks very much and greetings from Germany.
Impressive. It's like 3D printing with metal. Those shavings at 32:40 are a beautiful blue color.
It’s not like 3D printing with metal… it’s literally 3D printing with metal. It’s additive manufacturing. Stuff like this has been around as long if not longer than 3D printing. This is the daddy of modern 3D printing. Also, they have actual metal 3D printing in the same format that you’re imagining.
Your a very talented man you know your trade I'd give you at a boy's all day long from a old retired welder thanks for the videos
Top tier skills. Way more therapeutic to watch than you'd think too. Thank you.
There is so much more to this than people realize. The weld build up you don't want to be excessive because of machining time. And its best that finish isn't between layer's so peeling of the weld doesn't happen. Great job!!
I would have thought that you would have to treat the metal somehow if you did something like this. This is fine the way it is, no heat treating or anything like that???
@@mitchweber7868I don’t think you would need to per se. Since its a continuous weld surface on a single parent material. Plus there are bushings on top.
Amazing work! Your equipment is spotless too, not easy to do out in the field.
that wasn't a bor watching you boring the apatur... what a beautiful peace of equipment and very well done sir. 👍
Excellent video! I never knew those type repair machines existed! Fascinating to watch, and a great outcome.
13:00. that is cool how the machine uses cams to control the amount of weld distance in PIE cut... .I thought it might be controlled by computer.......great looking job Greg......
This is a really good video that the guys that hate paying for repairs and should see why it cost so much to repair . lots cheaper to replace a bushing and pin then wait till is half way through a arm lol. Great work cheers from Australia.
They see the machine making a couple thousand a day and just don’t care.
@@OFW Doesn't that mean it's losing a couple thousand a day just sitting there doing nothing as you're repairing it?
@@BrokenLifeCycle yes it does.
Damn. This would pefectly combine my love of mechanics, machining and heavy equipment operation.....
Don't know what you get an hr but your work an the precision you do is well worth it ! 👍👍
That was certainly worn!, quite a difficult operation to maintain lubrication points. Impressive PI or PIE feature and weld interrupt. Great work and video, thanks for sharing. Regards John
I think I’d pack those bushings the day before in dry ice so they would shrink then just keep them in a cooler and bring them with you.
I agree we used to make the bushing an interference fit and shrink them in with liquid nitrogen. BUT you do have to get the limits and fits correct...
Cat bushings do not shrink even in nitrogen. It makes no sense but it's true
I like this style of boring system that you have. It looks light weight and very useful, un like the system that a person is using in Australia.Good job and video!
His system is a little faster to setup but my system is more versatile. Either way as long as the job gets done.
That is some coooool chit right there, that welder going back n forth 🥽🥽🥽🥽👍👍👍👍
You have some very nice equipment brother. Must have worked hard to get those.
Excellent work. 👍 That looks brand new.
I don’t what you’re getting paid, but you should double it. Incredible amount of know how,logic and grit to do this work.
That's a really nice feature, perfect for that situation. Idk there's something kinda hypnotic about watching that torch going back and forth. The interrupt button is another handy feature, it's a pretty sweet setup. Climax.
I've watched all of your videos and taken pointers into my own welding job, real amazing stuff you do man. Truck tour when?? 😅
Mint job,that line boring machine is some kit you got there,stay safe.
Інформативне і дуже повчальне відео👍👍👍
Thanks for your videos! Learn a lot watching them.
That is a very clever line welder, what with filling the "out of round" bottom of the hole and also being able to jump over the grease holes. The machine designers certainly thought about it. We are definitely an intelligent species. Great video.
I started watching your videos a few days ago when one poped up as a suggestion. It was you welding an earth mover which had developed a serious fuel leak deep inside one of the machine's arms. You cut out several large plates just to get to the leak and despite all the flames you successfully welded the many cracks, splits and replacement panels to seal up the tank once and for all. Brilliant job and much skill involved. I was impressed by the shear volume of different situations and problems you dealt with on site and in your workshop. I watched a few videos and subscribed because you do a lot more than set a machine to do your welding for you. I've watched three videos on line boring and this one is by far the most not just interesting but skilful because I had only seen complete revolution welding, but in this one, the borer welded the bottom part first bringing it to a level where full revolution welding was possible. That matchine is bloody marvellous. Your apprentice must be in his element because I would be if I were in his shoes.
That smart welding fixture must have cost an absolute fortune...
It's amazing how all those layers of weld come up like fresh forged steel once machined!
looks like 3d print
Steel is pretty unique as metals go, it’s metallurgy/strength doesn’t get messed up as badly by repeated weld passes as other metals, which helps make repairs like this viable.
Always good to be busy! You hate the days when your getting interrupted all the time but that's when you know your making 🤑🤑🤑
Great arc shots in this one Greg!
Really impressive work. Thanks for putting this content out.
I’m impressed with the Climax machine, does a great job and looks like it has come as a kit. The big blue box visible in the background. Almost all the lineboring equipment I see here in Australia is 3ph or homemade single phase. I note yours is hydraulic, Greg , I’d like to know why you selected hydraulic as the rotational force. Did the Climax come with its own power pack or did you adapt something else suitable? Regardless, it is a very tidy piece of equipment and does a good job. You’re a hand man to have around!
The base Climax kit comes with a 120v electric motor. It’s okay, but the hydraulic has massive amounts of torque. Climax sells all the stuff to make it hydraulic.
Moral of this story: Don't let holes get that sloppy.
I have to say you do fantastic work, I have heard of line boring and did not know how special it is. I don't do your sort of welding ,I do mostly regular fab work , not on heavy equipment. On seeing your work I wish I had know of it sooner, great work your are a master welder.
Great channel! And fantastic work. The bill for this job should surely open the contractor's eyes to the savings of some timely.maintenance!
Is the new metal that was added back by layering welds as strong as the original metal that was worn down from heavy use? Or will there be flaws in the new metal at a microscopic level that human eyes can't see unassisted that will result in this having to be done again sooner than it would on a new machine? I'm currently at my 3rd job related to metal fab, but I've only gotten to see welds related to sheet metal so I'd love to know the science behind this from anyone that knows!
The weld is the same as the parent material. I don’t care how good anyone is, welding up a bore like this there will be flaws and small imperfections in the weld. But that isn’t really a big deal because the bushing is taking the load and it’s spread evenly over the bore.
@@OFW that makes sense! thank you for the explanation!
Speaking of being wet with 3 phase; a colleague of mine once briefly held that stuff during a work accident. Company sent him somewhere alone in the middle of the night like idiots. He was lucky to survive that and we couldn't believe that happened because he called me right after. My home was close to the shop we worked at and I almost laughed when I saw him. He was straight out of cartoons, his hair straight up, skin slightly burned here and there and the soles of his shoes were exploded, nearly gone. At that point I realized he was slightly delirious and understood why he was so calm on the phone. Luckily he ended up being alright. Remember boys, if ya don't know what it is, it's buzz!
How many days in the hospital? Sounds like a big bang, rather than a buzz. Ears might have been ringing also.
@@gorillaau it was the only person I've known to not only survive such a shock but also without any major damage. Something must have gone seriously right with his situation aside from being there at night, without rest, dancing with satan. I quit that shithole after a couple of weeks but as far as I know he was ok. Didn't know if he sued and how did it go, I hope he did and ended up shutting down that shop. They were closed after less than a year anyway. I wasn't surprised because the management was a bunch of shitheads
@@mistaowickkuh6249 Probably everyone else in the trenches got out after you did. Walk out before you are carried out in a body bag.
Great filming. That was a complex repair, well done.
Awesome work man. I’m a heavy mechanic and I really like watching this kind of work done. I try to stay out of the guys way that does this work for us when he is busy.
I can only imagine how much a specialized, high quality instrument/set like that bore lathe costs. I mean, I get it, sometimes for your trade you NEED to have certain equipment so the price isn't as big of a deal breaker as it is for any random dick like me, but damn. That is an impressive piece of specialized kit. I'm sure it pays for itself pretty quick so long as you can line up the work with it, even if its worth more than I make in a year. Beautiful work, thanks for recording this and sharing it with us boss.
being that far gone would it be better just to replace the hole end? or is that a lot more work
It’s a decent amount of work and the end piece is very expensive.
@@OFW I kind of thought that, but thanks for answering my question
Never seen these tools or this process before and it has to be the highlight of my week seeing your skills in action. Love learning and specialized tools in the hands of skilled workers and this hit all the nails on the head.
good morning from hurricane infested Orlando, Florida.....cheers, Paul
awesome work! puts into perspective how much work could have been avoided with proper greasing and pre-work inspections lol!
Hey mate, surely that line boring machine is worth every cent that it costs. Helped you turn a mushed up piece of machinery back to near new. Well done.
That was fascinating, great camera work and good explanations of what you're doing and why.
Можно только позавидовать технологиям, инструменту и оснастке. Высший класс!!!
Great repair and work! It will be a happy customer! Video is well made as well!!
Love the sound of the sleeve going in. Boink!
the amount of skill, work and time that is neccessary to fix this, is insane
Amazing work! 💪🏼
I have a multimatic 220 and I love that welder. Absolutely amazing machine. Amazing work, Great Job!!
Impressive work. Thanks for filming
Master Craftsman at work. Beautiful!
You are using the technology available (which is practical) to its best advantage. Well done.
Is it strange to be hypnotised by timelapses of machining? Pressing in those sleeves, wow !! So 20 * US$650 + parts; cheaper than a replacement no doubt.
Very nifty feature that pi partial weld!
Very cool and educational to see, I saw the job at hand and thought to myself ''Man how are you going to fix that?'' and I was not disappointed by the process.
I love finding repair videos like this. I didn't even know this was a thing and it's very interesting!
When he was pressing in that bushing, in know the threads on that nut were screaming! Great video!
Interesting to see how others do the same kind of repairs. I did one of these in pretty similar shape. Thankfully they had the dog bone pins pulled to do a true bar to bar setup. I always weld up stand offs to put the big bearings on to keep the chatter down and take bigger cuts. I always do all the welding by hand with bigger wire too. Took about a 20 hour shift to knock it out from skimming out old bearings with air arc fixing grease lines and build up faces.
Big refit huh? That pie weld option is cool on your climax bore tool. Thanks
Great Video sir love your truck 👍
This is one of the greatest things I've ever witnessed. Super impressive!
Amazing what a small amount of us humans can do, thank you for documenting your work it is much appreciated.
I do the same type of machine repair, but on MUCH smaller machinery. At 41:25 I was thinking, "man. I cant imagine pressing in a component so big that even a torch and hammer couldn't save me". But then Mr. Hammer showed up! and then Mr. Torch! Good to know the basics still apply to the big boy jobs. I guess that means the big machine repair guys also freeze components for interference fits, but it's probably a lot fancier than my upside-down cans of compressed air i bought at costco haha.
Whoever was doing that work is a real craftsman.
in the field. savage. i've only ever done things in well equipped shops but the lure of doing stuff in open air looks sick.
Hermoso equipo de trabajo. Saludos
Absolutely amazing!! 👌🏼
Хороший level оборудования и понимая процесса. Добро.
These pops when the new sleeve moves in after tons of force were present are pure satisfaction
Pure anxiety lol.