Cool idea! Do not throw away broken drill machine!
2020 ж. 24 Қаң.
5 790 843 Рет қаралды
I installed a 12 volt blender motor on the broken drill machine.
It's not as strong and fast as it used to be, but it can be used in small jobs.
You could also use 12v battery instead of adapter.
MY INSTAGRAM: / king_of_homemade
Please leave like and subscribe.
Watch my other videos:
Angle Grinder Hack! Don't Throw Away the old Angle Grinder!
• Angle Grinder Hack! Do...
How to Make a Circular Saw Using old Angle Grinder!?
• How to Make a Circular...
Thanks for watching, leave a comment.
Uufvicgj bjh get the latest flash
What is the name of motor I want it can available on online tell me
Get a new brushless drill. Cheap enough and will do a better job than that old P O S
🙂🤩😚😇🤩😙
@@rijwankhan3417 à
Perfect for drilling butter.
Hahahaha
Best YT comment of the day.
Genius.!
Man. If you only knew how bad I needed this laugh when I read this. Thank you from the bottom of my heart.
The bearings sound rough, the whole event is not worth it. Drills of that quality are cheap enough, better to recycle and buy a new one!
great, i finally have a use for that drawer full of old blender motors i'm not using
Well done for making the most under powered drill on the market. Top job. For your next video let’s see your refurbished tool, drill a 13mm hole.
Haha it can barely drill pine with a 5mm
Think it may have been easier and better just to put new brushes in it!
Yes. My guess is that a good clean with contact cleaner and new brushes would have the motor run pretty much like new. The worn out bearings and absence of grease is a completely different story...
In this case the armature and/or field coil was probably burnt and useless. This is a good Mc Gyver if you are far a way from a store / stores are closed / urgent job and if you have a DC motor handy which can fit into the housing nicely.
That's what I would have done, and a new power cord.
you might not know if the rotor was ok or not, what if it is burned
But with this 775 motor drill machine, you can use it with just a 12v battery anywhere.
Perfecto algo así estaba buscando !!! Saludos desde MÉXICO 😁
I just learned how to spend a few hours turning up 120 volt drill into 120 volt drill😳
😆😆😆
You also learned, "how to" waste a few hours.
Serious? 🤔
Not only that, I believe you also watched someone turn something back into itself.
🤣🤣🤣🤣
I've got to be more careful when I pick a video to watch
Ohhh yess.....absolutly......AC and DC
Hmmm.... you mix AC and DC motors......thats no good.....put it in the recycle bin
😂
@@lennartekdahl8298 he’s not mixing it he is using 220v or 110v to 12v circuit so he’s not mixing the motor maybe you should know what happening before you comment
The deal breaker is connecting the small diameter motor shaft to the old gearbox by drilling the old output shaft. That's really skillful engineering! Not many people are up tot that! Interesting to watch anyway (with the sound turned down).
Darn...need a drill to fix a drill.
That's interesting...I cast this one to my ho. W theater system and rattles the windows!
@@JohnSmith-mw2hh Oh the irony.
I used my Catitar to play the strings. She was not amused😾
@@soylentgreen9492 Did she divorce you?
Can you use the gears to replace powerwheel gears as well.
Hello. Good job, but the circuit you are running the motor with, where did you get it from or how did you make it
Took a drill apart. Then put drill back together. Amazing!!
very good for making holes in butter
Hi , great job ! Just Wondering to know when Ac to dc , bridge and rectifier?
This guy is like a driving instructor who says "Keep Death off the roads, drive on the Sidewalk.. Nutter
magic motor! it is very good to see inside. you are really nice!
This perfectly demonstrates that just because you can do it, doesn't mean you should do it. I'd imagine after all the parts, the solder, the electrics and all the time and hassle of drilling bits out, cutting bits off, then all the worry that its going to electricute someone or blow up at some point, it may just have been easier to buy a new one.
You got that right!!!
Tht s it..!
Look very good. Well done !! Ques: What is (are) Specifications of the motor you used for this repair, Electrical & mechanical, model, size ?? THanks
Is the replscement motor as powerful as the original?
Next video: "How I adapted one of San Onofre's discarded nuclear reactors to drive my wife's washing machine"
LOL
😂
You can also run directly on rechargeable batteries. How much torque does it provide? You can also test it on bricks as well. If the old rotor is still good, you could have simply removed the stator and fit strong magnets on both sides of the rotor in the casing. It would save much work. Do cutting and no drilling to fit dc motor.
I should do that in one of my next projects. Thanks for watching 😊
You cant Test it in bricks since it has No Hammerdrill function
yo pensé en algo parecido . pero tengo una duda con que estas alimentando el motor 775 ?
Thank you for the Share. ...and so you can the next 10,000 holes drill . Good idea, ......... maybe on a drill stand for small narrow work with a clamp for workpieces. Greetings from Holland.
Great technique no doubt. We just need to realize that over engineered products can be simpler and cheaper if the required parts are replaced. Eg brushes. This drill is now imbalanced and can only be used for low torque jobs. Your engineering skills are 😊👍.
Yeah, i also noticed we can't use that for hard wood. But what if he welded the new motor to the old part?
Great Useful Idea
Good luck with it. Show us a video with you drilling through a 4x4
Nice idea but how you connected reverse forward switch please explain
775 moter make dc powerful screw driver👍
Nice job man 🙏
Cool you made a drill out of a drill!
Great background music 🤘 Metal is the ONLY way to go! Lol
Great vid! Shoulda just gon'ahead and fixed that power cord while you were at it. Hehe.
I'm going to keep telling myself this was a 15 year old kid making this video...so I don't feel like a real idiot for watching till the end
LOL
Yes, much better alignment!
Nice sir galing
Muito bom gostei 👏👏
It might feel like a waste of time to some, but skills some people have are always worth watching.learning something new is always worth watching.they probably said your wasting my time to Ben Franklin to.
Well fine, but I'd like to see people using tools and vice correctly.
Informative video. now see how motor connects to chuck - actually offset from one another.
Eq!
kzhead.infoHHZp8JeIAb0?feature=share
Bit ironic because you need a drill to do this lol
😂🤞
Thank you my friend you give me an idea to use again my defective drill thumbs up👍👍👍
Sir which motor we use? is it 12v dc motor
Loved it
What kind of motor used?
I like using the motor itself to make drill using dc source and throwing the broken drill 😀
no torque then.
I'm here for the Megadeth the drill was a bonus.
HaHaHA, me too.
I thought this video was going to be crap it didn't disappoint 👍
Maybe if I lived in Cuba, otherwise spend $12 dollars at Harbor freight and get a new drill
HF drill.... really ?! Lol.
lol thats exactly what I was thinking while watching this
Kenny Davis It's better than that abomination.
Thanks for this video...good for us who cant afford to buy new one.
My feelings exactly, I'm fortunate to have several high end tools, meaning too expensive, but knowing how to repair anything is priceless. I haven't always been able to just walk into a store and throw money at the cash register in order to always buy the best tool in stock, but had always bought the best I could with what money I had In My Pocket, which fortunately have lasted for fifty plus years. And now that I do have several of those upper-end tools I still tend to use my older corded tools just for old times sake.
The dc motor you replace is it 775?
those wire ties are sharp, especially the angle you cut them at - they will cut
😅🤣😅🤣😅🤣😅🤣😅🤣you killing ME Blessings brother 🙏
But you still need to bolt the body of the motor to the casing or it with proper torque will spin inside the casing . Use the mounting holes on the front facing it the motor housing.
NICE HEAD BANGING MUSIC!!!!!!!!!!!!!!!!!!!!!!!!!!!!! oh by the way nice job on the drill rehab!!!!!!!
Whats the name of that black thing that connecting the wires. Mines burn up. Could u tell me the name so i could get a new one
Nice idea
Don't throw away, repair it! Seems legit!
NICE ! MATCHSTICK !! HOLES !! THIS ! CONTRAPTION ! DOES !!
Really wonderful and useful information. Thanks for your efforts taken to share the video. From Jawaharlal Bharat INDIA 🙏
This. Is. Cool 😎. And the sound is perfect 👌 and the music 🎶 is perfect 👌😎
Where did you get the replacement motor
Lot of complaints but over 2 MILLION views, mission accomplished!
That drill seen better dayz 😂!
Nice project idea if doing it just for fun but not really practical.
I expect a work of art from a 'King' of Homemade. But now i really dissappointed. Thumbs up for effort 👍
Why throw your old car away when you can put a lawn mower engine in it.
😅😂😅😂😅😂
Bhai drill mashin ki chabi kase banaya
Hello,hope that you read It and give me an answer, I think many here want the answer, Where did you get the electronic circuit to convert ac to dc? Can you provide a diagram or a link to acquire it, I would be very grateful if you answer me, thanks
Legal Parabéns,Deus bem diga! SALVE sua coroa! Axé.
Hello ,what is the circuit 220 ac to 12 v dc, good proyect
220 Volt AC to 12 volt dc, 1 can get adapter of laptop or any other device
That probably won't work, the drill probably needs more current than a laptop adaptor can produce. Actually, was this even a 12V motor? Looks more like AC->DC conversion without step-down, i.e., 265VDC or some such.
Good job but u need more details on it and make it also safe for ac inputs..
Nice. How many watts consume now and if can do what do with Ac ?.
60 watts and first see what you are comment then ask
You missed out on greasing the bearings!
so, you took a broken drill and made a dangerous broken drill.
LOL
Or at best a useless one
Lol 😆 why is it dangerous
supid people will call fixing something dangerous
😂😂😂😂😂
Aunque el motor que usó de repuesto son los que usan los atornilladores a batería no puede tener la misma potencia debido al sistema de transmisión que poseen dichos atornilladores. Puedes perforar los agujeros que quieras en madera y usando una broca pequeña pero no puedes hacer siquiera un agujero en metal con esa misma broca con ese taladro refaccionado.
How about steel 1/4 in or thicker
So you took a broken drill and made a drill amazing
Bhai dc motor kaha milti he aur apke paas he kiya
thought he was gonna repurpose it into a mill, but quickly realized he was just killin the clutch... i was like , wtf are you doi.... then remembered you cant fix stupid!
This is exactly like my drill
Great 🤘👌👍
Good idea
What Tool does he use to use to connect wires
Very good idea
Great for drilling through plasticine
Husband. Look honey I fixed it! Wife. This is why we can't have nice things.
perfect for drilling jello.
Do you really think those zip ties are going to keep the new motor from spinning in the drill case when the drill bit has a lot of pressure on it, or it's stopped by a piece of metal you're selling through?
Kya baat he bro
Basically, you take out the big motor and put a smaller motor in. But was the big motor so impossible to repair?
Changing the brushes would have been my first move. Worn down to nearly nothing and not making full contact. If that fails, throw away. Not worth the time.
Excellent
I bet this guy can make a blender from another blender
I liked your video, congratulations, I’m written on your channel, I really like watching your videos, I have a exmilhadeira that burned could u make a video doing how to fix it ??
What is in side. Is that out side?
That's a nice project when you don't want to wash dishes but I can get those drills for $5 bucks on offer up 😹😹👍
So where did the replacement motor come from? Another working drill? Does it have more torque than original? Seems like too much effort for average results, unless you're just really attached to that drill.
Very good
Bro pls give link for the motor used in it
hello, could you say which engine was used? I'm looking to buy an engine to do the same thing on my drill machine, and maybe also on my jigsaw machine
It's called a motor, an electric motor.
@@Stewie-yp1vg I think he is being funny. He's not serious...
Good video bro. Love renewing things.
he did not renew it he replaced old for broken lol