www.fridayparts.com/
for all the tools in this video
How to replace hydraulic cylinder seals
seal replacement
hydraulic
DIRT BOSS MERCH STORE NOW OPEN!
teespring.com/stores/dirt-boss
Easiest Hydraulic Cylinder seal Replacement video in the WORLD
Hello my name is Mike and I'm the owner operator at TC Masonry & Excavating also known as Dirt Boss please leave a comment and tell me what you think!
Replace Hydraulic Cylinder Seals Like A Pro With This Easy How-to!
TIP JAR ❤
DIRT BOSS creates KZhead videos on a Budget, Donations are appreciated!
www.paypal.com/paypalme/dirtb...
If you would like to email me:
mike@tcmalbany.com
My Equipment:
KOBELCO SK160-6E
KUBOTA SVL 90-2
KOMATSU PC35MR-5
KOMATSU WA270-8
KOMATSU D51 PX22
KOMATSU PC88 MR-8
JOHN DEERE 310G
BOMAG 172-2
BOMAG BW900-2
HYDREMA 912
MF 35
BIG TEX 7 TON
DYNAWELD 20 TON
KENWORTH T-800
GMC W4500
RAM 3500
RAM PROMASTER 3500
TRI- COUNTY EXCAVATING
*CLASS IN SESSION - WOW* Man CONTENT is great but your DETAILS bring it all beyond for ANYONE planning this operation *on ANY piece of equipment* with the same or like seal configuration. This is a *LIFE SAVER* video showing not only how to do it but ALL the intricacies along the way! Outstanding in-depth performance! BIG THANKS!
That was a great how to video. The right tools make any job easier.
It’s heartwarming to see our tools put to good use. Keep this machine runnin smooth and stay safe on the job. 🧰
Jesse Muller did replace the seals on his new excavator last video. Good diy explanation
Nice work. Can’t imagine what an equipment service would charge for this
Great videos man I love watching them I just started working for myself doing excavation and stuff you should do a video on your start up and success and lessons you learned and finding work and whatever else on working for yourself
Great how to vid Mike lotsa great info from experience there! Man that was work I need a coffee now in my DB mug of course lol!💪
Great video. You do a great job explaining the how to. Keep them coming!!
We recently rebuilt the lift cylinder on our JCB mini... thanks for the tips and i did leave a👍
The Dirt Doctor!!
Hey Mike, great video. One tip for next time…if you ever have something that was assembled with loctite (especially the red) just use some heat on it before trying to take it apart. It doesn’t take much time or heat from a torch to break the bond of the loctite, and then you can much more easily unscrew the component. Obviously this doesn’t magically make the huge amount of torque you have to apply to break it loose somehow disappear, but it does lessen the time you spend having the fight the loctite the entire way as you take it apart. Hope this helps, keep up the great work you do both in your business as well as in content creation.
Thanks
Great video from Dirt Boss!
That's awesome mike, good job, yeah I know those gland nuts can sometimes be a pain to get off bigger the machine bigger the torque value, thanks for sharing
That's a great video ! Thanks, Jody from Canada ! 🙂
Glad you enjoyed it!
Great video Mike, Thank you for sharing.
Thanks for the video. I gave up trying to do a 6" barrel for my blade lift cylinder because the gland nut was so tight. You can't really do it on the excavator, so I took it to a pro who struggled at first but finally got it done. He used the same pipe wrench and two guys to get it to move. Your suggestion to take pictures is the key to avoiding getting into trouble. A big vise and a steel table bolted to the floor come in handy if it can't be done on the machine. Thanks for mentioning Friday Parts. Finding a resource for the heavy-duty tools was a problem to find.
You have to heat that nut up.
Thank you for this video. I’ve got an old backhoe, and I’m facing this project on a few cylinders. Plus knowing where to get the proper tools is important too.
You're welcome and good luck!
Thanks I watched the whole thing
Thanks Pal
Great Video Boss, thanks for the tutorial!!
Great job!
Nice job
Awesome video, you should be a teacher!😊 Greetings from Norway!
Good job explaining the steps on the rebuild
Always Great Mike.....Thank You!!
Great job Mike!!! Glad to see you are doing the maintenance before the busy season hits and preventing it from happening during the time a big job is going on I think that’s great!!!! I worked for a contractor that waited until fluid was leaking all over and the men lost time because he’s trying to save money in the long run it cost more because of more damage being done than a repair in the first place that would have cost less!!!! See you in the next video!!!
Boss man… I’ve done that job wrong a couple of times… now I know where to look the next time I attempt it. Thanx bud!
Nice!! Honestly, I'm so glad you were doing that instead of me.
I’m about to have to do angle cylinders on my 650k this video will help a lot! Thank you
A great watch well explained 👍👋🇨🇦
Thanks
Great job Mike This video is one of my all time favorites. You kinda remind me of you being anal about how you’re so picky about how you do things Iam the same way. Again great job.
Great job Mike. Thanks for sharing.
If you get bored I have about three to do!😁😁
Very cool to see how a cylinder is rebuilt! Thx!!!
great job!
Thanks
You made that look easy I saw billstmaxx do that once and it looked like a really pain in the ass lol
Great video Mike. Thank you sir.
Glad to see a longer video
D-Boss!…thumbed you up…great hydraulic DIY…that means…Do It Yourself!…I’m no mechanic…but I play one on my equipment…because I can’t wait!…hears the tip of the day for ya and the masses…just about 99.6% of the time all you have to do once you disassemble everything is put your good eye on the packing seals and o-rings and eyeball the inner gland seals and if all looking decent, save yourself the a$&pain and just change the wiper seal and slap it back together and then pound a banquet brew!…usually that’s the problem if it’s weeping a little…is it the right way to do it…No!…but I’ve been cheating lately and I don’t have any more weeping!
I hear you I know guys that do that but if I'm going to take it apart I'm going to put it back together right!
@@DIRT-BOSS next time!…D-Boss!…it never ends!
Tri Ball hitch and a 12 Lb sledge!
Hahahaha U know it 💪
Awesome video DB, you are rocking it lately! Gotta do the stabilizer cylinders on my backhoe.
👌🏼🤘🏼👌🏼
Good job
Slangin that Fridayparts Chineseisum, not knocking your hustle at all but some guys might be confused when they receive cheap aftermarket parts from China, after seeing you support them.
I think it's obvious they come from overseas but that gland nut wrench is the real deal
@@DIRT-BOSS Yea that piston nut tool does look ok and the amount of adjustability is really it's highlight. I purchased a water pump and some other engine components and was pretty disappointed with quality and fitment. Just saying be careful of what's associated with your brand sometimes might not be worth it in the long run.
@@In2investing should always buy OEM especially for the seal kits….I’m not trusting no alibaba…kung fusesium…bombay trading parts!
How do you Get work for your business? I’m a small business who grades driveways and I’m fondNing it very hard to find people willing to pay.
Great video Mike. I need to replace seals on my dipper cylinder on Case 580SL. When I did the boom cylinder, i had to take somewhere to remove & replace piston nut. Isyour tool from FridayParts the 380mm (15"), 480mm (19") or 620mm (24 1/2") overall length? Thank you
Hang tight I'll check...15" ✅
15"
Thanks so much
9:17 where did you get that contraption to loosen up the nuts?? I need to buy one
Description
Great job!