KZhead

Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT

Fixotronic
2020 ж. 14 Қаң.
64 802 006 Рет қаралды
Жүктеу

Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT ?
NEW BRIGHT IDEA
----------------------------------------------------
• Amazing use of a Hamme...
AMAZING! Top 3 Bright Ideas!
• Top3 Don't Throw Away ...
• Video
• Do Not Throw away your...
• AMAZING! Top 2 Bright ...
• AMAZING! Top 3 Bright ...
Idea With a Drill !
-----------------------------
• Bright Idea With a Dri...
• A Ttricky Secret for a...
• Bright Idea With a Dri...
Idea of the Bicycle Hub!
-----------------------------
• Bright Idea With a Dri...
• Awesome Device of the ...
• Bright Idea from the O...
Idea With Angle Grinder!
-----------------------------
• Bright Idea With Angle...
• Bright Device of the A...
• Bright Idea with an Ol...
Top Ideas !
-----------------------------
• Bright Idea With PVC P... - Idea With Plastic Canister!
• AWESOME IDEA! HOW TO T... - TWIST ELECTRIC
• Bright Idea With a Dri... - Idea With a Saw!
• AMAZING Idea With an Ax ! - Idea With an Ax
Other Creative Ideas
-----------------------------
• AMAZING! Bright Idea f...
• Secret Use of a Drill ...
• Bright Idea With Drill...
• Bright Idea With an Ol...
• Brilliant Idea With An...
• A Brilliant Idea With ...
---------------------
Welcome to Fixotronic channel:
Our channel includes such videos
- Idea angle grinder
- Drill idea
- How to make
- Cordless drill ideas
- Grinder ideas
--------------------
Music:
Birch Run - Primal Drive by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/

Пікірлер

  • The fact that we all have absolutely no idea how we ended up watching this plus the intense jungle like drums makes this a lot better.

    @xxxspacy@xxxspacy4 жыл бұрын

    • Ahahahahaaaaa

      @2mb6rl@2mb6rl4 жыл бұрын

    • Jumanji.

      @craigfell6906@craigfell69064 жыл бұрын

    • Didn't realized that music was playing till you said something

      @eggz2369@eggz23694 жыл бұрын

    • These type of comments are bullshit.. Did someone click the for you to watch😏

      @__________________________---@__________________________---4 жыл бұрын

    • Right! I'm on my tenth joint now. No use for it but I thought it might be a perishable skill.

      @gunner678@gunner6784 жыл бұрын

  • Bunch of dudes worldwide laying in bed with no socks on just watching a random video of a pipe being welded. You’re one of them.

    @seansean3765@seansean37654 жыл бұрын

    • I have at 7am. It's 1.30am here and I don't know why tf am I watching this

      @SteakBawse@SteakBawse4 жыл бұрын

    • Ummm, actually sockless on the couch!

      @sweetjohnny8211@sweetjohnny82114 жыл бұрын

    • On my break at work

      @lokotroko1@lokotroko14 жыл бұрын

    • You got me :D

      @baweasel@baweasel4 жыл бұрын

    • Wife nearly caught me

      @sirmartinclarke@sirmartinclarke4 жыл бұрын

  • This music makes make feel like I should be doing a rain dance around him while he does this

    @trevordavison2182@trevordavison21823 жыл бұрын

    • Music free of copyright, that's the choice.

      @SevenLovedFrench@SevenLovedFrench3 жыл бұрын

    • 😂😂😂

      @umeshkumarsharma955@umeshkumarsharma9553 жыл бұрын

    • I did it, but it didn't rain :(

      @lore78@lore783 жыл бұрын

    • Lmao

      @Mantle777@Mantle7773 жыл бұрын

    • @@SevenLovedFrench didn't realise sawing sounds was copyrighted was totally unnecessary to add rain dance music to it.

      @PsyQoBoy@PsyQoBoy3 жыл бұрын

  • Your secret is safe with me. Me and the other 60 million people who saw this.

    @mvonsmallhausen3221@mvonsmallhausen32213 жыл бұрын

    • Of course.😂😂😂

      @senrukmuthunayake9961@senrukmuthunayake99613 жыл бұрын

    • Me and the rest of the 60 million agree with you . :))

      @gothips@gothips3 жыл бұрын

    • 😂

      @shadedstory@shadedstory3 жыл бұрын

    • You know what they say. 60,970,409 people can keep a secret if 60,970,408 of them are dead. So let's get started. Who's first?

      @CattleCluj@CattleCluj3 жыл бұрын

    • Here at 205 lokes

      @engineergaming4295@engineergaming42953 жыл бұрын

  • Native drum music is a must when doing this type of work

    @charlessawallich1870@charlessawallich18704 жыл бұрын

    • I thought I was watching "JUMANJI"

      @aussiefarmer8741@aussiefarmer87414 жыл бұрын

  • I've been asking my welder about this for years, but he refuses to talk about it

    @Tom-S1981@Tom-S19814 жыл бұрын

    • Golden Dawn Hierophant welders can’t talk. You should ask your weldor about it!!

      @ironwrx@ironwrx4 жыл бұрын

    • my personal welder won't shut up about it

      @Bix12@Bix124 жыл бұрын

    • @@ironwrx mine's programmable w/droid voice feature

      @Bix12@Bix124 жыл бұрын

    • 🤣🤣

      @sudheerchauhan7267@sudheerchauhan72674 жыл бұрын

    • "Why do I hear the *drum* music? "

      @nargarex2390@nargarex23904 жыл бұрын

  • Can't get over how your neighbour just kept drumming through all of that cutting work.

    @andhewonders@andhewonders3 жыл бұрын

    • This is the funniest thing i have ever read..

      @tiernan787@tiernan7873 жыл бұрын

    • :D and then he suddenly stops at ~4:40 and we are like: WAT?

      @giantgungames8739@giantgungames87393 жыл бұрын

  • I dunno, I never hear welders talk about anything. But hey, they must not.

    @kilroy987@kilroy9873 жыл бұрын

    • My friend who is a welder only talks shit and when he isn't he is pretending to be gay.

      @pam6585@pam65853 жыл бұрын

    • Lmao sounds about right

      @I3lazedOne@I3lazedOne3 жыл бұрын

    • I knew a welder once, and all he spoke about was fishing.

      @billgriffiths1685@billgriffiths16853 жыл бұрын

    • @@billgriffiths1685 Probable because it take too bloody long to do this join vs say a 45 cut?

      @damienkaletta7524@damienkaletta75243 жыл бұрын

    • @@billgriffiths1685 )))))))

      @bhaveshchaudhari3863@bhaveshchaudhari38633 жыл бұрын

  • "WHY DO WELDERS NOT SPEAK ABOUT IT ?" entire video - doesn't talk

    @jawshlitelife@jawshlitelife4 жыл бұрын

    • That's why they don't speak 😂

      @Inthenatureslap@Inthenatureslap4 жыл бұрын

    • Clickbait

      @dubtube6691@dubtube66914 жыл бұрын

    • @@dubtube6691 whatever but it's interesting to watch

      @Inthenatureslap@Inthenatureslap4 жыл бұрын

    • @@Inthenatureslaptrue

      @dubtube6691@dubtube66914 жыл бұрын

    • 🤣😂😂

      @tusharkhakha6182@tusharkhakha61824 жыл бұрын

  • I asked my uncle and he said "we have orders to complete ain't nobody got time for that" that's why welders don't speak about it 😂

    @guser436@guser4364 жыл бұрын

    • Yeah a 45 butt joint works just as well you would only use this if you wanted the rounded edge

      @anthonycope8637@anthonycope86374 жыл бұрын

    • I agree.. looks nice, but if your welding on the clock it's way quicker to weld at a 45 or 90 cut

      @GYPSY400@GYPSY4004 жыл бұрын

    • If you are a production welder, this kind of thing separates your products from the rest...

      @campbellpaul@campbellpaul4 жыл бұрын

    • @@campbellpaul nah, time and efficiency matter more. Unless you are some artist, this joint is not needed.

      @cjrouse9508@cjrouse95084 жыл бұрын

    • Plasma cutter would speed up the process a fair bit

      @guestuser3192@guestuser31924 жыл бұрын

  • Grinder and paint makes you the welder you ain't.

    @zachariahdaugherty2787@zachariahdaugherty27873 жыл бұрын

    • WRONG

      @ChargeNReact@ChargeNReact3 жыл бұрын

    • so true

      @wanderborn.@wanderborn.3 жыл бұрын

    • If you need a ginder to make your welding look good your a grinder not a welder..... Me I'm a bird shit. Because when someone sees me weld they go What the fuck is that

      @JackTalyorD@JackTalyorD3 жыл бұрын

    • .

      @krzkam7792@krzkam77923 жыл бұрын

    • Good welds don't have to be pretty, although that's a plus. My brother and dad were both good welders. I saw their work,and it put to the test. Their welds didn't look horrible, or messy, but they weren't pretty, either. I worked with them, and with another guy who made the most beautiful-looking clean welds that I've ever seen. They wouldn't hold $#!†. He made something for me, and one of the welds popped off when I tried to bend the piece a little to make an adjustment. Grinding the weld smooth is a good practice. The build up on the surface doesn't add any strength, anyways.

      @ArkansasPilgrim@ArkansasPilgrim3 жыл бұрын

  • a great idea that a lot of people in this world have to learn from you including me

    @5phutsangtao-iQ@5phutsangtao-iQ2 жыл бұрын

  • This Corona quarantine has me literally watching anything KZhead recommends.....

    @HisMajesty99@HisMajesty994 жыл бұрын

    • Lol.....

      @hunteraclm3597@hunteraclm35974 жыл бұрын

    • @@hunteraclm3597 Хаз

      @hrantmuxdusyan3274@hrantmuxdusyan32744 жыл бұрын

    • @@hrantmuxdusyan3274 não oque vc disse mas tem haver com a quarentena kkkkk

      @sergioricardo5093@sergioricardo50934 жыл бұрын

    • Sergio Ricardo bicho até BR tem aqui kkkkk

      @crise_estetica_brasileira@crise_estetica_brasileira4 жыл бұрын

    • Anything....?

      @allanroberts7129@allanroberts71294 жыл бұрын

  • me: why this KZhead : its recommend my brain : go for it watch it fast

    @venkyroman8505@venkyroman85054 жыл бұрын

    • AHHAAHAHH No one: Absolutely no one: KZhead: its recommend

      @JulianAAYoung@JulianAAYoung4 жыл бұрын

    • Lmaooo Me : 5am cant sleep why not get started

      @mattobrien2511@mattobrien25114 жыл бұрын

    • same

      @AC-rx6fr@AC-rx6fr4 жыл бұрын

    • Venky Roman 👀

      @CASH-TO-THE-MERE101@CASH-TO-THE-MERE1014 жыл бұрын

    • Venky Roman this!

      @keasone@keasone4 жыл бұрын

  • He must get paid by the hour.

    @hawk1093@hawk10933 жыл бұрын

    • I'm no welder but I wanted to laugh by the 1:33 mark.

      @nickds7@nickds73 жыл бұрын

    • Union jobs, lol

      @joshua.merrill@joshua.merrill3 жыл бұрын

    • That's how most jobs work.

      @DemnRaig80@DemnRaig803 жыл бұрын

    • If I weld something for even just 2 mins I get paid for a full hour perks of being a non union mobile welder

      @philgraves7814@philgraves78143 жыл бұрын

  • Love how to keep the small used blades around for small cuts like this. Most people throw them away. 😄

    @nickstar166@nickstar1663 жыл бұрын

  • Top 3 mysterious in the world 1: Egyptian pyramids 2: Area51 3: KZhead recommended (edited) Hey Thanks for 2k likes i never expect this

    @---....---USAMA---....---@---....---USAMA---....---4 жыл бұрын

    • 4: Peoples thinking they are originals writing same shit than everybody.

      @Hlodowig1989@Hlodowig19894 жыл бұрын

    • 5: Why do welders not speak about it

      @edgarfgomez@edgarfgomez4 жыл бұрын

    • @@edgarfgomez 6: Why did I click on this

      @1123pawel@1123pawel4 жыл бұрын

    • Hehehe...

      @daboy1621@daboy16214 жыл бұрын

    • LMAO so true x)

      @GuuJiYA-a.k.a-TheCrafty@GuuJiYA-a.k.a-TheCrafty4 жыл бұрын

  • I immediately called my welder friend and we indeed didn't speak about it.

    @mymistymountainhop@mymistymountainhop4 жыл бұрын

    • 😂😂😂😂

      @heavensentmarshall1481@heavensentmarshall14814 жыл бұрын

    • Lol.

      @steveklick@steveklick4 жыл бұрын

    • Did you instead talk about that filing!! Oh my! Forward only.

      @dr.dickie1418@dr.dickie14184 жыл бұрын

    • Lol

      @jed-henrywitkowski6470@jed-henrywitkowski64704 жыл бұрын

    • @@dr.dickie1418 lol

      @steveklick@steveklick4 жыл бұрын

  • I've seen a lot of people talking about "the craftsmanship" and how "it looks like it would be stronger" but if you want to talk about craftsmanship and strength we should talk about how he just stacked tacks on tacks without cleaning them in between. More than likely The metal did not get hot enough for the weld to stick properly and there Will be plenty of slag inclusions that will open up when that thing is under any form of stress.

    @the_db_gamer9970@the_db_gamer99703 жыл бұрын

    • I'm not sure that he cares about the craftsmanship as long as he gets the 60M views.

      @TheyForcedMyHandLE@TheyForcedMyHandLE3 жыл бұрын

    • If he was using 6010 which it looked like he was then he’s fine it will penetrate

      @juanfadez6489@juanfadez64893 жыл бұрын

    • That was my first thought when I saw that

      @trevordavison2182@trevordavison21823 жыл бұрын

    • The famous full-tac-weld for when you have no idea how to weld. As-seen-on-youtube.

      @alecksluciferis4188@alecksluciferis41882 жыл бұрын

  • Am I a welder? No. Do the various types of pipes fascinate me? No. Do I want to watch a 5 minute video of a guy cutting a pipe? Hell Yes. KZhead is inside of us.

    @abba136@abba1363 жыл бұрын

    • Yes, Watch a random 2 minute video recommended to you. enjot it. refresh KZhead and repeat!

      @puffco4202@puffco42023 жыл бұрын

    • @@puffco4202 couldn’t have said it better!

      @abba136@abba1363 жыл бұрын

    • I am welder 😵👌😁

      @ANMOL_DHIMAN.@ANMOL_DHIMAN.3 жыл бұрын

  • This was refreshing after viewing several KZheads about septic tanks. I'm still not sure how I got here but am glad I did. It just goes to show that at 80, I still have a lot to learn. Uniqueness is appealing and though there are faster ways to do a right angle, this has a certain appeal. Thanks!

    @tonietoney5917@tonietoney59174 жыл бұрын

    • copied from :- Cara bending besi hollow/kotak tanpa alat bending

      @constructionsecrets6048@constructionsecrets60483 жыл бұрын

    • @@constructionsecrets6048 that video is a hack job. This video is mastery at work. Huge difference in workmanship and clarity.

      @roho4373@roho43733 жыл бұрын

    • sorry, but i disagree. Look at the rest of the comments. I think i will weld the same corner. I will give credit to where it came from. I will tell you in my vid why welders dont talk about it.

      @constructionsecrets6048@constructionsecrets60483 жыл бұрын

    • У нас говорят: "Век живи, век учись!" (We say: "Live for a hundred years, study for a hundred years!" )

      @Unisoldat@Unisoldat3 жыл бұрын

    • Only idiots work that way, it's much longer than a 45 degree cut

      @TABIBI-OP@TABIBI-OP3 жыл бұрын

  • 🥁 The drums are a reminder that we are stuck in the KZhead algorithm. There’s no escaping this matrix.🥁

    @THETRUEKING12@THETRUEKING124 жыл бұрын

    • There is no spoon.... well, not unless you fancy welding one together yourself.

      @matrixredpill@matrixredpill4 жыл бұрын

    • I like Baby Yoda videos, Marathon running tips and video rants about why Man Utd are so poor: why this came up I have no idea.

      @elliotmason2911@elliotmason29114 жыл бұрын

    • Whoa bro

      @joemcg0241@joemcg02414 жыл бұрын

    • We got sucked into a KZhead Jumanji and cannot escape until the video is complete lol

      @SnakeEyesSOG@SnakeEyesSOG4 жыл бұрын

    • Best human comment

      @WaffleWaffles@WaffleWaffles4 жыл бұрын

  • Muito top Vale a pena conferir parabéns pelo lindo trabalho. 👏👏👏🇧🇷

    @marcosandrepereiradasilva2075@marcosandrepereiradasilva20752 жыл бұрын

  • 10 out of 10 for the technical work, 5 out of 10 for the welding.

    @BlueBaron3x7@BlueBaron3x73 жыл бұрын

  • My dad, who's a welder, saw me watching this and made me swear to never talk about this again. You're treading dangerous waters, friend.

    @redflags6583@redflags65834 жыл бұрын

    • Hahahahha the best comment so far

      @CPT543@CPT5434 жыл бұрын

    • Justin Umali really?

      @spaghettigod1794@spaghettigod17944 жыл бұрын

    • But... "WHY?!?!" LOL Seriously, though... is this really some weird secret or something? I mean, it's a cool mathematical trick and all, but any mathematician should be able to tell this "secret" and not need to know how to weld.

      @Jypsie415@Jypsie4154 жыл бұрын

    • 🤣🤣🤣🤣

      @gichbuoy@gichbuoy4 жыл бұрын

    • @@Jypsie415 Yes, all engineers and scientists that are not completely incompetent can do that maths, but thinking and calculation will take hours.

      @y.z.6517@y.z.65174 жыл бұрын

  • I *LOVE* when these videos pop up in my algorithmically populated list... because I *KNOW* the comments are going to be 🔥!!

    @benclarkson4205@benclarkson42054 жыл бұрын

  • A great video and exceptional great content. Well-described information and helpful. Thank you so much for sharing this. I will surely share this blog with my friends.

    @dennyjoseph5952@dennyjoseph59522 жыл бұрын

  • I have an irresistible urge to pierce my nose with a bone.

    @reubenj.cogburn8546@reubenj.cogburn85463 жыл бұрын

    • i would rather weld it to my nose

      @Adirtan@Adirtan3 жыл бұрын

    • I have the urge to drive a bamboo pipe through my lower lip.

      @mrbigbag@mrbigbag3 жыл бұрын

    • 😂😂😂

      @Knuddel00@Knuddel003 жыл бұрын

    • Sulik? Is that you? :-)

      @crazysarkon297@crazysarkon2973 жыл бұрын

    • Nobody cares.

      @davelangford2439@davelangford24393 жыл бұрын

  • You win again KZhead. I clicked on this and watched it.

    @MrSpeedyAce@MrSpeedyAce4 жыл бұрын

    • Watch it again, after read my comment.

      @melkiy582@melkiy5824 жыл бұрын

  • the reason welders don’t speak of it, is simply because this isn’t pipe. this is square tube, taken from the natives

    @christianteddy@christianteddy4 жыл бұрын

    • 🤣

      @leehunter1246@leehunter12464 жыл бұрын

    • Steven Hickman it’s square tube buddy

      @christianteddy@christianteddy4 жыл бұрын

    • Steven Hickman pipe: hollow cylinder. tube: any shape and size, hollowed.

      @christianteddy@christianteddy4 жыл бұрын

  • ingenious. Thank you for sharing. Profoundly creative true craft.

    @jonathankerner2094@jonathankerner20943 жыл бұрын

  • Magiczna! Greetings from PEREIRA, Colombia! Saludos a todos!

    @paulalexanderangaritajimen7768@paulalexanderangaritajimen77683 жыл бұрын

  • _"A grinder and paint makes him the welder he ain't"..._ but his geometry skills are on point.

    @bluefalconssuck5881@bluefalconssuck58814 жыл бұрын

    • Considering it is thin metal, and hes stick welding, very difficult to stick weld thin unless you use small diameter rods. Those welds dont look bad, plus you dont no the application. Maybe these were handrails, and those are pretty strong for that purpose.

      @ibidu1@ibidu14 жыл бұрын

    • But u didnt get the point of the video then.

      @trollslandan@trollslandan4 жыл бұрын

    • 1. I actually weld for a living. 2. I use this technique when called for. 3. The quote is in recognition of the nature of welding thin metal. 4. It's actually a COMPLIMENT to his skills. 5. Those that weld would recognize this. But please do go on... Reading comments from people whose experience in burning metal starts and ends with sticking knives in toasters & power outlets is funny as hell.

      @bluefalconssuck5881@bluefalconssuck58814 жыл бұрын

    • @@ibidu1He was stitch welding, Effective but not pretty hence the extra grinding.

      @july8xx@july8xx4 жыл бұрын

    • He did a fine job thanks 👍

      @craigm5601@craigm56014 жыл бұрын

  • Another secret nobody talks about : how KZhead recommendations work

    @abhishekshinde2411@abhishekshinde24114 жыл бұрын

    • Fucking right How for my KZhead searches are lego Star Wars the other half are cowboy gun videos wtf is secret welding

      @falloutpropguy@falloutpropguy4 жыл бұрын

    • Haha! That was literally one ove the worst welding jobs I've seen. Next time don't paint over it...you can actually see how bad it is through the paint.

      @patrtickcyr9075@patrtickcyr90754 жыл бұрын

    • @@falloutpropguy ikr 😂😂

      @abhishekshinde2411@abhishekshinde24114 жыл бұрын

    • Let's build a rocket.

      @199999nm@199999nm4 жыл бұрын

  • I can't explain how much I love everything in this video

    @kehehe9934@kehehe99343 жыл бұрын

  • They don't talk about it because like this video , silence is golden.

    @PsyQoBoy@PsyQoBoy3 жыл бұрын

  • Came for the secret, stayed for the comments!😂😂

    @omniversling@omniversling4 жыл бұрын

    • Indeed.

      @MrThenry1988@MrThenry19884 жыл бұрын

  • Im using headphones and thought someone was welding outside, sound goes crazy, great video.

    @Pepepollazo420@Pepepollazo4204 жыл бұрын

  • Thank you KZhead for showing we the people of USA and the world cool stuff! ALSO; this is when an engineer is a welder too :)

    @stewbeef3464@stewbeef34643 жыл бұрын

  • Sem palavras, você é fera 🏆 👏👏👏

    @joselourenco8540@joselourenco85403 жыл бұрын

  • Now that he violated the confidentiality agreement, he's been excommunicado.

    @haesung2148@haesung21484 жыл бұрын

    • I just resive the text massage

      @JesusCruz-my3ob@JesusCruz-my3ob4 жыл бұрын

    • Last seen in the saw section of his local Home Depot

      @pedrobury6275@pedrobury62754 жыл бұрын

    • Haha. Yeah. Sound like a true union board

      @ryanb1874@ryanb18744 жыл бұрын

    • John Weld

      @ihaveaplan.ijustneedmoney.9777@ihaveaplan.ijustneedmoney.97774 жыл бұрын

    • Tic toc Mr. Welder tic toc. ☠

      @Rick-Sanchez-C-137@Rick-Sanchez-C-1374 жыл бұрын

  • Why I'm I watching this, I'm an electrician.

    @702Blunt@702Blunt4 жыл бұрын

    • I’m be a Electrician too started my degree this year

      @tubbsspnkbnk3113@tubbsspnkbnk31134 жыл бұрын

    • I never write comments...but I had to on this one. I'm an electrician saying the exact same thing! However, I make a lot of brackets up for our equipment and I will be using this the next time I build a bracket.

      @philipashdown1958@philipashdown19584 жыл бұрын

    • Hehehe...

      @daboy1621@daboy16214 жыл бұрын

    • Right I build scaffolding this has nothing to do with my job but it’s nice to learn something new.

      @Gettinbentoffroad@Gettinbentoffroad4 жыл бұрын

    • Drummer here

      @JBmusicart@JBmusicart4 жыл бұрын

  • So amazing techniques to bent tubular , never been seen round sided work

    @bossrogerofficial2571@bossrogerofficial25713 жыл бұрын

  • Muito obrigado, gosto muito de serralheria, sou autônomo na área, vou usar muito essa técnica nos próximos serviços com metalon

    @nairtonlopes4800@nairtonlopes48005 ай бұрын

  • When your drawings are perfect but you turn out 1.5mm off: HAMMER TIME!

    @mr.rabbit5642@mr.rabbit56424 жыл бұрын

    • Hahahahahahaha

      @warrenthomas3168@warrenthomas31684 жыл бұрын

    • It's what my technical drawing and workshop professor used to call "centring" 😂

      @josipivankovic2170@josipivankovic21704 жыл бұрын

  • Lol... everyone is wondering how we got here watching a damn welding video in 2020. KZhead algorithm.

    @ThinkLascivious@ThinkLascivious4 жыл бұрын

  • Most impressive....although the drums. But smart. Very smart. Thx for sharing.

    @DontStopBrent@DontStopBrent3 жыл бұрын

  • With that welding it's no surprise that welders don't speak about it lol

    @brekbeatattack7038@brekbeatattack70383 жыл бұрын

    • Seriously!

      @robc4191@robc41913 жыл бұрын

    • This guy needs to stick with being the fit up man, seems good at it.

      @TnyHlr@TnyHlr3 жыл бұрын

    • Hardly even welded, just did spot tacks.

      @jamesguilliam4822@jamesguilliam48223 жыл бұрын

  • Por lo que se ve en 3:49 me suscribo, es una gran idea que al decir verdad... No tenía NPI de que sería tan sencilla la solución para dar un terminado excelente! Gracias

    @gcabor@gcabor4 жыл бұрын

    • Weno se supone que es un secreto, para q los demás no sepan hacerlo y solo recurran a ti :v, es q también soy cerrajero y nadie dice un método mejor a nadie para q sus ventas no reduzcan :v

      @megamanizeroxd7412@megamanizeroxd74124 жыл бұрын

    • @@megamanizeroxd7412 te gusta el pacman :v poke amo también

      @T.H.E.l.@T.H.E.l.4 жыл бұрын

    • En Colombia no lo hacemos por ahorrar material está caro XD

      @jallethhumbertoduartelugo9993@jallethhumbertoduartelugo99934 жыл бұрын

    • See how he does, tries very hard: kzhead.info/sun/fcxrpdF_qnePe5s/bejne.html

      @Janushek-ob3id@Janushek-ob3id2 жыл бұрын

  • YT recommendation: yes this jungle drum welding dude needs our ad money Me: ok

    @scream_follow1520@scream_follow15204 жыл бұрын

    • Hell yeah

      @shrithanosmaharaj8679@shrithanosmaharaj86794 жыл бұрын

    • YT: Me: using adblocker

      @tobytoxd@tobytoxd4 жыл бұрын

    • Yes 🤣🤣

      @pablootzoy9822@pablootzoy98224 жыл бұрын

    • Me: Using YT Vanced for Android. :P

      @EarthboundApocalypse@EarthboundApocalypse4 жыл бұрын

    • I'm premium user and this is worth it lmao I learned how to do something that I didn't even know that I wanted to know

      @amaury_permer@amaury_permer4 жыл бұрын

  • Qui ideia e vivendo E aprendendo Parabens

    @ribariba1452@ribariba14522 жыл бұрын

  • Side note- Im glad i bought a Wire welder, more often then not i see people with stick welders trying to get their arc to start, i didnt want that trouble, that, and im not a fan of having to buy packs of rods. A reel of 0.36 is all i need, they arent that expensive either. Another plus, i havent gotten my wire stuck to random metal like ive seen happen with stick welders. All in all, great video, and to anyone wanting a welder, definitely do your homework on what you want to be welding, your budget for a welder, and other variables. I will say my lil Lincoln Electric FC90 is a great starter wire welder. Lincoln Electric also has starter welding kits, comes with: Chipping hammer, paint marker, magnet capable of making 90 degree angles, gloves, fire resistant sleeves, and of course, a helmet! I highly recommend it because you can plug it into standard house power, no need for big ol plugs. Have a great day, and happy holidays!

    @bonelesswhiskey2865@bonelesswhiskey28652 жыл бұрын

  • Welders DO speak about this, you probably can't hear them over the drums.

    @peteszerszen7370@peteszerszen73704 жыл бұрын

    • 🤣😂

      @zanpekosak2383@zanpekosak23834 жыл бұрын

    • Allahu ekber Bismillahi Rahman i rahim

      @muhammedkarahanmalatya7atu168@muhammedkarahanmalatya7atu1684 жыл бұрын

    • Bombombombumbobombumbobobombumbom

      @sammorgan31@sammorgan314 жыл бұрын

    • You, sir, win the internet today.

      @gregiep@gregiep4 жыл бұрын

    • 😂😂😂😂😂👍

      @kshitiz5417@kshitiz54174 жыл бұрын

  • 30 years iv been doing welding and that's the first time iv seen that done ,excellent bit of work

    @briansilver6196@briansilver61964 жыл бұрын

    • Well, as long as you ignore the awful welding, it does look alright.

      @300fans@300fans4 жыл бұрын

    • Exactly what I was thinking crazy panda 😂 why not just run a nice stringer

      @makeitloose5315@makeitloose53154 жыл бұрын

  • Da fabbro complimenti se hai altri segreti fallì vedere sono bene accetti 😉👏👏

    @forgiaro@forgiaro3 жыл бұрын

  • Imagine putting in this much work just for a 90 degree angle...

    @kielovpyriel3752@kielovpyriel37523 жыл бұрын

    • To then just weld it shut...

      @sadville13@sadville133 жыл бұрын

    • And it ist even closed inside Look 3:34

      @donutstyle2908@donutstyle29083 жыл бұрын

    • @@donutstyle2908 Your a doughnut, its not closed their because it is not finished...

      @connorl7012@connorl70123 жыл бұрын

    • @@connorl7012 yea then why does the Video end withput Himmel cutting this one peace out

      @donutstyle2908@donutstyle29083 жыл бұрын

    • It could be useful for certain applications, where you want that nice rounded outside corner instead of a sharp one. But it's definitely more labor-intensive for someone using hand tools too.

      @tyree9055@tyree90553 жыл бұрын

  • Fact: You didn’t search for this

    @obi-wankenobi6307@obi-wankenobi63074 жыл бұрын

    • Fr

      @alyah727@alyah7274 жыл бұрын

    • How, exactly, can you prove I didnt?

      @TENNSUMITSUMA@TENNSUMITSUMA4 жыл бұрын

    • Fact: I don’t think any normal human can would search for it

      @mrlebanon6055@mrlebanon60554 жыл бұрын

    • Proven by the like button...

      @Mike-my7uf@Mike-my7uf4 жыл бұрын

    • I really didn't LMFAOOOO

      @sunwolf87@sunwolf874 жыл бұрын

  • I'll have to remember this the next time I want to spend a whole day putting a right angle in a piece of box section. 😀

    @deejarvisful@deejarvisful4 жыл бұрын

    • I fell asleep, woke up had breakfast, pulled my dick and came back to KZhead and He was spray painting up a funny looking join 😀

      @xbsickness@xbsickness4 жыл бұрын

    • I hope you get paid by the hour!

      @bondovwvw@bondovwvw4 жыл бұрын

    • @Dee Jarvis, no it only takes 4 minutes and 53 seconds.

      @Rubbernecker@Rubbernecker4 жыл бұрын

    • I was waiting for the answer to the question the whole time

      @gabrielpichardo1492@gabrielpichardo14924 жыл бұрын

    • The boss called, he loves your work but we only billed this job 1hr. You're fired.

      @debunkthejunk1@debunkthejunk14 жыл бұрын

  • Great work.. excellent technique..

    @wasifahmed123@wasifahmed1233 жыл бұрын

  • why because in 45 years as a professional welder i have never done this

    @tiny789@tiny7893 жыл бұрын

    • Because it takes about 45 years to do a joint like this, when it takes 45 seconds to just bend one with a tube bender.

      @joshua.merrill@joshua.merrill3 жыл бұрын

    • Because two 45s give you your 90. Weld and be done with it. Carpenters do it all the time!

      @email16v@email16v3 жыл бұрын

    • @@email16v In this example even one 45° cut would do the job. The video is still funny to watch.

      @TanigaDanae@TanigaDanae3 жыл бұрын

    • I've been welding for 69 years. This is the proper way to do it

      @ChargeNReact@ChargeNReact3 жыл бұрын

    • I think if we test, this joint must be stronger than the other ones. Just guessing.

      @markgonsalves@markgonsalves3 жыл бұрын

  • That's the music you play when you break the ancient welders' pact.

    @pratikppm@pratikppm4 жыл бұрын

    • 😁😁😁

      @frankcastle8349@frankcastle83494 жыл бұрын

    • He'll be hunted for the rest of his life. No place is safe, no one can be trusted. There are welders everywhere. Remember Jimmy Hoffa? Welded inside a 55 gallon drum filled only half way up with concrete and dumped in Hell's Gate. This fellow just stepped over the line.

      @danielfronc4304@danielfronc43044 жыл бұрын

    • @@danielfronc4304 Now he has lead himself to a life where he can't even breath without looking over his shoulder.

      @pratikppm@pratikppm4 жыл бұрын

  • 04.34..."Hey, the drums have stopped" "Yeah, it's quiet.....too quiet"

    @jontisdall6248@jontisdall62484 жыл бұрын

    • Oh no! Now comes bass solo.

      @phillipkarnehm7712@phillipkarnehm77124 жыл бұрын

    • 4:35

      @orocs4627@orocs46274 жыл бұрын

    • I'm thinking Jon is a Gilligan's Island fan. Am I right, little buddy?

      @1sm08@1sm084 жыл бұрын

    • @@1sm08 @1smo8, nope, heard of it never seen it. I was parodying the old time western/action movies where the heroes are surrounded by bad guys and there's a lull in the action.

      @jontisdall6248@jontisdall62484 жыл бұрын

    • @@jontisdall6248 I stand corrected.

      @1sm08@1sm084 жыл бұрын

  • Great idea! Thanks for sharing.

    @weldingbusinesssecrets@weldingbusinesssecrets2 жыл бұрын

  • Alan must be using this in Jumanji. Btw it's Beautiful. Never thought this was possible too. 👍

    @BigBang12007@BigBang120073 жыл бұрын

  • Damn those welders with their secrets. Always leaving us non-welders outside the loop.

    @Batmanananana@Batmanananana4 жыл бұрын

    • Best comment, hahaha

      @nostalgio697@nostalgio6974 жыл бұрын

    • The reason he's showing you is because no real welder would use Rhs that thin. And wouldn't really have a use for this in most day to day fabrication.

      @shaneprestidge8097@shaneprestidge80974 жыл бұрын

  • Played this with my soundsystem, started to rain.

    @orbeq@orbeq4 жыл бұрын

    • I laughed so hard

      @jonhenrywave9043@jonhenrywave90434 жыл бұрын

    • Lol

      @EliteOpticsLighting@EliteOpticsLighting4 жыл бұрын

    • LMAO🤣

      @theo.rivera@theo.rivera4 жыл бұрын

    • Ha ha ha 😂

      @englishearlgrey@englishearlgrey4 жыл бұрын

    • hahahahaha

      @ayktcylan@ayktcylan4 жыл бұрын

  • A great way to piss off the owner of the shop I work for and get fired for wasting time

    @someonehadtosayit2566@someonehadtosayit25663 жыл бұрын

    • id use a plasma to cut it faster then the grinder

      @auraswolf@auraswolf3 жыл бұрын

    • A tube bender would cost as much as it'd take to pay a welder to cut, bend, and weld a few of these joints, and with the time it'd save, it'd pay itself off after one job.

      @joshua.merrill@joshua.merrill3 жыл бұрын

    • @@joshua.merrill And you cant bend a tube with this small of a radius

      @kaptein1247@kaptein12473 жыл бұрын

    • @@joshua.merrill good luck with finding a die for square tube with that radius

      @StanleyKubick1@StanleyKubick13 жыл бұрын

    • @@kaptein1247 You can get close enough to make this joint not worth doing.

      @joshua.merrill@joshua.merrill3 жыл бұрын

  • Thanks for the lesson.

    @user-sz4ve6nb9y@user-sz4ve6nb9y3 жыл бұрын

  • Great video but I felt like A little man was going to jump out hit me with a blow dart halfway through it

    @joshm5156@joshm51563 жыл бұрын

    • A little man?

      @GraemeGunn@GraemeGunn3 жыл бұрын

    • @@GraemeGunn yea smol person

      @05tf@05tf3 жыл бұрын

    • Careful...that’s racist in 2021. Well, as long while racist is still trendy anyways....

      @marquisbois990@marquisbois9903 жыл бұрын

    • @@marquisbois990 being short isnt a race

      @05tf@05tf3 жыл бұрын

  • 2 days 11 millions views welders are furious their secret has been exposed

    @TBaroon@TBaroon4 жыл бұрын

    • Now 12169000! 😳

      @lucabevilacqua1001@lucabevilacqua10014 жыл бұрын

    • This had nothing to do with welding. Actually got dumber watching it

      @thegg5097@thegg50974 жыл бұрын

    • Stupid method, this is so time consuming and unproductive xD and what are the advantages of this? Nobody would know 🤷‍♀️

      @MaryDKidd@MaryDKidd4 жыл бұрын

    • @@MaryDKidd I guess if you were making an arm rest on a chair or bumper guard it would be worth the extra time.

      @jerrydelacruz5119@jerrydelacruz51194 жыл бұрын

    • 13,544,125 views • Jan 18, 2020 Still, glad there's a greater appreciation for craft rather than mean memes.

      @sobreaver@sobreaver4 жыл бұрын

  • Beautiful work, thanks

    @haashaas2508@haashaas25083 жыл бұрын

  • Thanks! clever tip

    @kevinleonard6609@kevinleonard66093 жыл бұрын

  • The music makes me feel like im slowly cooking in a giant pot why tribal elders play the bongos before they eat me.

    @chassa7266@chassa72663 жыл бұрын

    • It sounds like the Jimmy Castor Band playing the Big Bertha/Troglodyte Song.

      @looper9264@looper92643 жыл бұрын

    • Jumanji

      @davidem.4689@davidem.46893 жыл бұрын

    • lol 😂😂😂😂

      @vedantdangi9066@vedantdangi90663 жыл бұрын

    • 😂😂😂😂😂

      @jpjoubert7128@jpjoubert71283 жыл бұрын

    • I'm glad I wasn't the only one who thought the same.

      @jonboysgames1154@jonboysgames11543 жыл бұрын

  • coulda warned me when you were about to weld bro. almost lost my eyes without my mask on!

    @mojo8704@mojo87044 жыл бұрын

    • Mojo Seriously man, lol, we should’ve been wearing our PPE while watching him

      @chris17shooter@chris17shooter4 жыл бұрын

    • He got me with a grinder

      @TungstenCarbideTempe@TungstenCarbideTempe4 жыл бұрын

    • 😅

      @anthonycreed3023@anthonycreed30234 жыл бұрын

    • هههههه مخفففف دمككككك

      @mahmouddejavu9864@mahmouddejavu98644 жыл бұрын

    • @@chris17shooter yeah don't get arc eye agony from hell

      @nopretribrapture2318@nopretribrapture23184 жыл бұрын

  • Các bạn cơ khí có tay nghề cao. Mình rất ngưỡng mộ....

    @hatrannguyen6281@hatrannguyen62813 жыл бұрын

  • Tão bem explicado em pouco tempo,valeu!!!

    @sitiomoreno2706@sitiomoreno27063 жыл бұрын

  • Not sure why I’m watching this, I don’t even weld.

    @braydenmiller8021@braydenmiller80214 жыл бұрын

    • Not yet

      @Mrfoobaer@Mrfoobaer4 жыл бұрын

    • Well... that was not welding either! That was pure bird shit!

      @adrianaxelsen9254@adrianaxelsen92544 жыл бұрын

    • Same

      @fuse825@fuse8254 жыл бұрын

    • @@adrianaxelsen9254 jajaja for real

      @kingrodriguez5207@kingrodriguez52074 жыл бұрын

    • Next week Mr. Axel son will post a demonstration of his prowess welding thin tube without blowing a hole in it.

      @robertqueberg4612@robertqueberg46124 жыл бұрын

  • First rule of welding club; don’t talk about the secret profile pipe.

    @christianarman4555@christianarman45554 жыл бұрын

    • Honestly now everyone at work will be upset the secret is out😂

      @joannat.9097@joannat.90974 жыл бұрын

    • Popo will be upset

      @warcloudff@warcloudff4 жыл бұрын

    • What is the secret

      @jonnywhyte1848@jonnywhyte18484 жыл бұрын

    • The secret is it’s box section not pipe 👍

      @jasonmaxwell5824@jasonmaxwell58244 жыл бұрын

    • @@joannat.9097 🤣🤣🤣🤣

      @philortega6516@philortega65164 жыл бұрын

  • Muy bueno y necesario felicitaciones 👍👍👍😜😜

    @diegogonzalez3943@diegogonzalez39432 жыл бұрын

  • I've never welded before,but damn that looks smart in the thumbnail,seems useful,im gonna watch the video

    @johnsheppard5257@johnsheppard52573 жыл бұрын

  • I never searched for it. And you didn't too.

    @Abhinandan_Bang@Abhinandan_Bang4 жыл бұрын

    • Truth

      @slayer96da1st@slayer96da1st4 жыл бұрын

    • But for some reason it was satisfying to me and I watched it till the end lol

      @mercuryrreveal4871@mercuryrreveal48714 жыл бұрын

    • But it has 18 mln views

      @WantOxide@WantOxide4 жыл бұрын

    • True what is this here? Wow a guy who is working....

      @theoneandonly342@theoneandonly3424 жыл бұрын

  • I know why welders don't use this secret trick. Because it takes so damn long

    @David-ls4qp@David-ls4qp4 жыл бұрын

    • I was thinking the same thing! Is it really the trick that is the secret or is how long that method takes the secret?

      @blakeholder1017@blakeholder10174 жыл бұрын

    • I mean a torch or a plasma cutter would do it pretty quickly.

      @M7S4I5L8V2A@M7S4I5L8V2A4 жыл бұрын

    • Most people even if making a square end fit don’t even cap the open end tube.

      @michaelszczys8316@michaelszczys83164 жыл бұрын

    • If its a better job you shouldn't worry about how long it takes, I'll always pay a premium for better quality.

      @itsonlyacommentsnowflake3346@itsonlyacommentsnowflake33464 жыл бұрын

    • Long....? took 5 minutes?.... Probably less

      @AAA-vk9vp@AAA-vk9vp4 жыл бұрын

  • Simples, porém genial.

    @edsonruann@edsonruann3 жыл бұрын

  • Tremendo tremendo Gracias por compartirlo

    @moisesriveradiaz2174@moisesriveradiaz21743 жыл бұрын

  • Я знаю почему сварщики не говорят об этом: потому что сварщики такой херней не страдают)

    @user-qj7gy8ph5v@user-qj7gy8ph5v4 жыл бұрын

    • Что вы понимаете в гребаном перфекционизме))))

      @3518373@35183734 жыл бұрын

    • 100%

      @user-ey2tp3pm3c@user-ey2tp3pm3c4 жыл бұрын

    • Во-во

      @user-kb1ub4im4p@user-kb1ub4im4p4 жыл бұрын

    • Вот и я о том же написал!

      @849568@8495684 жыл бұрын

    • @@849568 а я жене сказал ))

      @user-gy4yi6kz8l@user-gy4yi6kz8l4 жыл бұрын

  • Welder found dead after natives discovered his secret..

    @TipOfAfrica0010@TipOfAfrica00104 жыл бұрын

    • Native tribe later found extinct due to inferior welding techniques

      @michaelm3691@michaelm36914 жыл бұрын

    • 460 likes 1 reply not including me

      @tommyegoldstein1741@tommyegoldstein17414 жыл бұрын

    • I feal like the reason why they dont do that technique is because it take like 30 time longuer then just cut 2 hss and weld it together and roll a plate to weld them

      @gabrielmercier794@gabrielmercier7944 жыл бұрын

    • Btw im a welder xd

      @gabrielmercier794@gabrielmercier7944 жыл бұрын

    • @@gabrielmercier794 ,👎

      @MsSchela@MsSchela4 жыл бұрын

  • I don't even know why this is in my reccomended. maybe it's because it heard the sounds of my automotive teacher welding a bolt 5 days ago.

    @joeslouie489@joeslouie4893 жыл бұрын

  • Parabéns, vc é muito fera!

    @joelhenriquespinto8590@joelhenriquespinto85902 жыл бұрын

  • I've trouble opening a soda can but suddenly I want to dedicate my whole life to metal working.

    @mp7091@mp70914 жыл бұрын

    • LOL!! I was like, yep I can do that this weekend.

      @SandyA7_LadyReaper@SandyA7_LadyReaper4 жыл бұрын

  • Die schönste "Runde Ecke" die ich gesehen habe. Hab ich allerdings schon in der Ausbildung vor 30 Jahren gemacht.

    @blacktemplar8346@blacktemplar83464 жыл бұрын

    • Und warum hast du nun "darüber geschwiegen?" ^^

      @Seitenwerk@Seitenwerk4 жыл бұрын

    • ?

      @x2malandy@x2malandy4 жыл бұрын

    • @@Seitenwerk Das ist wahrscheinlich so geheimes Schweißer Logen Ding. So Illuminati mäßig 😜

      @GoldenboY-DE@GoldenboY-DE4 жыл бұрын

  • Really, it's a simple idea, but it's amazing. You're amazing

    @user-ju5wr4fh9z@user-ju5wr4fh9z Жыл бұрын

  • 🇺🇲 I'm going to use this idea for my drill press stand. The radius will be a nice leg saver from a sharp 90° Thanks for posting this video. 👍

    @popples4973@popples4973 Жыл бұрын

  • This welder was kept anonymous to protect his identity because this is such a huge secret. He may even be in the welders witness protection program..

    @forrestcreek1598@forrestcreek15984 жыл бұрын

    • Isn't that why they all wear masks? Keep blabbing and he/she will weld you into a secret bent tube. Gotta stay gender neutral. You never know what troll will get hurt feelers.

      @PedramBastan@PedramBastan4 жыл бұрын

    • you already said too much... be carefull they are watching you

      @alexad7570@alexad75704 жыл бұрын

    • Alex Ad 🤭🤫😬. Uh oh, I broke the golden rule. Never trust no one!

      @forrestcreek1598@forrestcreek15984 жыл бұрын

    • Since publishing of this groundbreaking video, the welding illuminati placed a bounty on his head.

      @19bo84maryshore@19bo84maryshore4 жыл бұрын

    • @@PedramBastan Basically the idea of the Mandalorians on the TV show was based on the real life of welders. I've heard they were going to call the show The Welderlorian but it was considered too close to the truth and nixed by the inner cabal.

      @chaosmonkey7037@chaosmonkey70374 жыл бұрын

  • "a flapper and paint makes me the welder i ain't" fits nicely here

    @fredericduwe9920@fredericduwe99204 жыл бұрын

    • Lmao no kidding. I was cringing when he removed the slag.

      @TheExplosiveGuy@TheExplosiveGuy4 жыл бұрын

    • frederic duwe “if you’re not getting penetration with mig you need to see a doctor”

      @DapperD942@DapperD9424 жыл бұрын

    • The bigger the blob, the better the job.

      @mattjohns3394@mattjohns33944 жыл бұрын

    • You mean this weld has inclusions?!!

      @ryanm3749@ryanm37494 жыл бұрын

    • If you have to grind it your a grinder not a welder. It's ok I'm both, depends on the material and position.

      @pizzadude6615@pizzadude66154 жыл бұрын

  • Gute idee, danke! Wünsche einen schönen Tag...🤗😇

    @waraynonch.8972@waraynonch.89723 жыл бұрын

  • Goodwork I Really Expected to your Work process 👍👍👍

    @vickeykumaryadav4156@vickeykumaryadav41563 жыл бұрын

  • Music so intense I didn’t know I was also welding when this video ended.

    @rubenhernandez4394@rubenhernandez43944 жыл бұрын

    • Yess

      @yor1032@yor10324 жыл бұрын

  • Some like it, some don't But it always a good thing to share knowledge. Thank you for the video😃😃

    @hery8491@hery84914 жыл бұрын

    • @Hery Your profile pic goes well with the audio track to this video

      @glenn8773@glenn87734 жыл бұрын

    • Yes,thats right

      @nyitun2139@nyitun21394 жыл бұрын

  • Perfecto gracias por compartir👍👍

    @humbertolopez2954@humbertolopez29543 жыл бұрын

  • The welder lobbyists are extremely powerful, please take care. 🙏 Thanks for exposing one of the greatest secrets in human history.

    @simonwizard85@simonwizard853 жыл бұрын
KZhead