Wheel bearing: how to remove a jammed clip?

The hub bearing when replacing the often jammed, and remove it from the hub without damage seems impossible. So grab the people for grinders, chisels and drills, Sapareva precise surface hub, and falling again and again to replace the bearing.
This is not a normal situation, I assure you!
If bearing replacement is associated with jamming of the clips or the whole hub if the bearing has collapsed and does not want to release the hub - use bearing puller, which I show in this video! It will enable you to replace a wheel bearing for a couple of minutes, to keep intact the Seating surfaces, and will save you a lot of nerves.
The order of operation is very simple:
1. Assemble the puller under the bearing specific - I'm talking about the choice of the separator and the departure of the puller.
It all depends on which bearing you are going to change: for example the rear wheel bearing on the long axle will require a small cage and a big departure. And Vice versa - the wheel bearing is a serious jeep for a short hub, you need to remove a large separator.
2. Lubricate the threads of the puller and the wheel hub oil, if necessary, install the spacer to remove the bearing in one pass.
3. Rotating the Central screw of the puller remove the bearing from the hub. All!