KZhead
Автокөліктер мен көлік құралдары

How to make a 1/6 scale Steyr RSO - step by step

builtbyWikander
2019 ж. 14 Сәу.
116 242 Рет қаралды
Жүктеу

Here we have the build video, showing my RC scratch built Steyr RSO from start to finish.
The Steyr RSO (Raupenschlepper Ost/caterpillar east) was a light tracked utility vehicle and prime mover, used by the german military during World War 2. It was based on a 1,5 ton truck from Steyr, hence the truck-like cab. The RSO was noisy and slow, but negotiated the mud, snow and the no-existing roads of the Soviet Union better then the half tracks and lorry's also used by the German army. It was powered by an air cooled V8-petrol engine and was intentionally used as a support vehicle and artillery tractor, but the RSO was also used as a platform for anti tank-guns as well as for anti aircraft-guns.
I find the rounded, almost sad look of the RSO very appealing and interesting, and I wanted to make a vehicle without a turret this time. This was a fun and pretty straight-forward build, with the cab as an obvious peak.
If you want to see it in action, check out my previous videos! Thank for watching!
Music från KZhead free audio library.

Пікірлер

  • This is an Example of Model Building and R/C combined... the result is what can only be described as an Art that is seldom appreciated, yet should be Admired more often... even by those of us that lack the same skills and capabilities. Thank you so much for sharing! Bruno Biava ⚓

    @brunobiava4833@brunobiava48333 жыл бұрын

    • Thank you so much for the kind words! 🙏

      @builtbyWikander@builtbyWikander3 жыл бұрын

    • 🙏... I am a Mariner in my heart and I sometimes volunteer aboard the LST 325 in Evansville, Indiana. She was built as a Weapon of War... but, aboard her I find Peace in the remembrance of all that have given their Lives in Conflict... and the Contributions of so many people on both sides of that Conflict that still allow us to live in a World so far removed from the Conflict that they endured. Your Modeling helps bring Honor and Awareness to the Souls lost in the Conflict of War... and move me towards Prayers for Greater Understanding so that their Sacrifice is remembered... and that We may learn how important it is to not allow Confrontations between Individuals become Conflicts among Groups resulting in Wars that only Cost the Lives of the Innocent People that are sent to Fight. May God Bless You for reminding me to both Pray and Give Thanks, Bruno ⚓

      @brunobiava4833@brunobiava48333 жыл бұрын

  • Congratulations - what a masterful build! It´s impressive to see how you´ve embraced new technology and techniques without losing sight of the value of more traditional model making skills and materials.

    @Del350K4@Del350K44 жыл бұрын

    • Thank you for those kind words! Glad you enjoyed it!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • oh man , these models are insanely cool

    @orsonincharge4879@orsonincharge4879Ай бұрын

    • Thank you! 🙏

      @builtbyWikander@builtbyWikanderАй бұрын

  • what you do is FANTASTIC!!!

    @MotoMUSEUM@MotoMUSEUM8 ай бұрын

    • Thabk you!

      @builtbyWikander@builtbyWikander8 ай бұрын

  • ¡Formidable trabajo! Sinceras felicitaciones, ud. es un maestro. Un saludo desde Argentina.

    @norbertocarena2394@norbertocarena239416 күн бұрын

    • Thanks a lot! 🙏

      @builtbyWikander@builtbyWikander16 күн бұрын

  • Wow!! A really amazingly well presented video of a superb build. Very well done!!

    @anthonyfoley3401@anthonyfoley34014 жыл бұрын

    • Thank you very much!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • The small details are outstanding

    @mouseaviator3672@mouseaviator36725 жыл бұрын

    • Thanks man! 🙏

      @builtbyWikander@builtbyWikander5 жыл бұрын

  • Amazing work

    @dirtyd2316@dirtyd23162 жыл бұрын

  • Wow, this is completely crazily great!

    @peterhsu987@peterhsu9874 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Amazing work! Those tiny working door handles are fantastic. Love the dirt wipe effect on the windshield too.

    @brianbindas6816@brianbindas6816 Жыл бұрын

    • Thanks a lot, and thanks for watching! I actually thought of doing the cab without working doors at first, but that would have been a bit dull. Glad I chose to have them working. 😊

      @builtbyWikander@builtbyWikander Жыл бұрын

    • @@builtbyWikander Thanks for sharing your talent with everyone. I'm happy I found your channel.👍

      @brianbindas6816@brianbindas6816 Жыл бұрын

  • Superb build! Thanks for sharing.

    @peterrobinson7187@peterrobinson71872 жыл бұрын

    • Thank you and thanks for watching!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • I just keep watching this over and over and over, trying to work my nerve up to try something like this- it si an INSANE LEVEL Of True Skill and Actual, OLD WORLD Craftsmanship. Well Done. PLEASE DO MORE !! YOU ARE AN INSPIRATION !!

    @steelblueflame@steelblueflame Жыл бұрын

    • Thanks a lot, that's very kind if you! More build videos will come!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Such a nice little vehicle. You did a great job with the cabin! Pleasure to watch.

    @AdamFilipCreations@AdamFilipCreations Жыл бұрын

    • Thank you! 🤗

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Very impressive build, well done 👍🏽

    @Fjordreje@Fjordreje4 жыл бұрын

    • Hey, thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Again whauw. Love the details

    @MrHjertebageren@MrHjertebageren4 жыл бұрын

  • Amazing work love the details like the working door handle it's beautiful

    @devas522@devas5222 жыл бұрын

    • Thanks a lot!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Que coisa mais linda! Eu adoro esse RSO! Parabéns pela iniciativa!

    @clebercampoy2049@clebercampoy2049 Жыл бұрын

    • Thank you and thanks so much for watching!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Brilliant work, congrats.

    @jaimefernandez6117@jaimefernandez61174 жыл бұрын

    • Thanks, man!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Brilliant work

    @stephenparkes626@stephenparkes626 Жыл бұрын

    • Thanks a lot!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Always wanted a 1/2 scale version of the RSO to tool around the back yard in! Great work!

    @michaelsnodgrass1808@michaelsnodgrass1808 Жыл бұрын

    • That sounds like a life goal! 😄

      @builtbyWikander@builtbyWikander Жыл бұрын

    • And thank you!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Just Brilliant, awesome build..

    @robbyhood2467@robbyhood24674 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • What a beautiful model

    @paulbateman3654@paulbateman36542 жыл бұрын

    • Thank you! 🙏 I'm very happy with it!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Great work and attention to detail.

    @davepriddy9263@davepriddy92633 ай бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander3 ай бұрын

  • klasse !!!!!!! super gebaut der Hammer 👍👍👍👍👍

    @baer1204@baer12043 жыл бұрын

  • Damn, that's out of this world.

    @maxrpm2215@maxrpm22152 жыл бұрын

  • Masterful.........sublime!!

    @TheDieselbutterfly@TheDieselbutterfly8 ай бұрын

    • Thank you! 🙏

      @builtbyWikander@builtbyWikander8 ай бұрын

  • Maaaaaaan! Amazing work, man! Amzing!

    @joaoaraujo8081@joaoaraujo80812 жыл бұрын

    • Thank you! 🙌

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Thanks for the video .Great job

    @user-wu7nl1iw6r@user-wu7nl1iw6r2 жыл бұрын

    • Thanks for watching! 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Muy buen trabajo!!! Me encanto al final el camion terminado... Genial!!!

    @falcondonnorjhonn1098@falcondonnorjhonn10982 жыл бұрын

    • Awesome, thank you!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • You are extremely talented.

    @philheath9854@philheath9854 Жыл бұрын

    • Thabks a lot! 🙏🙏🙏

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Your workmanship is outstanding that man , how I wish I possessed your skills . BRAVISSIMO MAESTRO 👌👏👌

    @airbornesoldier8104@airbornesoldier81042 жыл бұрын

    • Thank you very much! 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • That’s really nice

    @buzzsaw42productions63@buzzsaw42productions633 жыл бұрын

  • Wow impressive skills , both new and old .

    @tomatoes3@tomatoes32 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Wow, just WOW. I love the combination of new tech (3D printing) and old school workmanship with files, hammers and an anvil. Can I ask what material you are printing with for the structural parts such as wheels, sprockets, track parts, etc? The chain drive looks like bicycle chain, where do find the gears to run the motors to the drive sprockets? Thank you for sharing your work, I am looking forward to watching all of your videos!

    @frankdaniels2626@frankdaniels26263 жыл бұрын

    • Thank you! Yes, I quite like the mix of techniques - it's fun to not 3D-print everything and do some real modelling too. :) The chain is a bicycle chain and the sprockets are fixed gear or single-speed sprockets bought from bicycle internet stores. The plastic sprockets are jockey-wheels from a mountainbike gear shifter. Thank you for the kind words, and thanks for watching!

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • Thanks for the video!!! 😉

    @mouseaviator3672@mouseaviator36725 жыл бұрын

    • You're welcome! 😄

      @builtbyWikander@builtbyWikander5 жыл бұрын

  • incredible, top job.

    @ericvanquickelberghe8575@ericvanquickelberghe85752 жыл бұрын

    • Thanks a lot, man!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Nice Job. Great

    @bonsaj1983@bonsaj19832 жыл бұрын

    • Thanks a lot!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • как всегда идеально !!!! вот бы мне такие игрушки))))

    @user-ws3qh8ct4s@user-ws3qh8ct4s2 жыл бұрын

  • Fantastic!!

    @H-H69@H-H692 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Wunderful work Bro😃👍👍👍

    @Zaubersterndli@Zaubersterndli2 жыл бұрын

    • Thank you! 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • I want one of those 👍😍

    @eduardofajardo6168@eduardofajardo61683 жыл бұрын

  • Outstanding

    @TheSkullReviews@TheSkullReviews Жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • 素晴らしい出来栄えです！ good job!

    @yasuyukitakeda@yasuyukitakeda4 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Such a good video!

    @RobbOnTheRock@RobbOnTheRock3 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • Amazing

    @MrThewhip333@MrThewhip3332 жыл бұрын

    • Thanks! 🙌

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Bro acts like we have all the parts 😂I live it

    @scouttroopergaming@scouttroopergaming8 ай бұрын

  • Love from India 👍🏻🙏🏻❤🇮🇳👌🏻💐😊

    @theprofessor3472@theprofessor34722 жыл бұрын

  • Absolutely beautiful machine. Your workmanship is outstanding. I love making things but not nearly on your level.

    @markfehrenbach4204@markfehrenbach42043 жыл бұрын

    • Thank you so much! Must say, I love your little tire pump!

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • iNCREDIBLE!

    @altaextranezaenargentina1951@altaextranezaenargentina19512 жыл бұрын

    • Thanks!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Awesome!

    @korpikuus@korpikuus5 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander5 жыл бұрын

  • Uma obra de arte....👏👏👏👏👏

    @ManiadeRC@ManiadeRC4 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Stupendo veramente molto bello sei un maestro nel costruire 👍🤩

    @user-em6ov9ul6b@user-em6ov9ul6b4 ай бұрын

    • Thank you! 🙏🙏🙏

      @builtbyWikander@builtbyWikander4 ай бұрын

  • Magnifique !

    @alainjulien6570@alainjulien65702 жыл бұрын

    • Thanks!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • A masterpiece¡¡

    @kidacero@kidacero4 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • So the Wife taught you how to sew, eh!?! ;) Kudos on your werk - it helped me with my 1/35 Italeri projekt. Respekt

    @the_lost_navigator@the_lost_navigator2 жыл бұрын

    • I have sewn since I was 17. 😎 That's cool, man - nice to see it's not only large scale models that find my material useful!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Dang! You're good.

    @InoFughaul@InoFughaul2 жыл бұрын

    • Thank you! 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • 你是我的偶像，向你学习！EXCELLENT JOB!

    @dojianz7714@dojianz77144 жыл бұрын

    • I am making a 1/6 marder2。

      @dojianz7714@dojianz77144 жыл бұрын

    • Thanks!

      @builtbyWikander@builtbyWikander4 жыл бұрын

    • @@dojianz7714 Nice, thats a cool tank. Good luck!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Erik your RSO is fantastic! I like the use of wood for materials. I was skeptical of a wood cab, but you nailed it perfect. It looks great. Would you consider sell wheels and tracks? Super job, enjoyed your AMX as well, but RSO is a favorite of mine.

    @robertmorey4104@robertmorey41045 жыл бұрын

    • Hi, thank you! Yes, it's a quirky little machine. Haven't figured out a good strategi regarding selling anything yet, but we'll see. Thanks for watching!

      @builtbyWikander@builtbyWikander5 жыл бұрын

  • WOW P*E*R*F*E*C*T Modeling!!!! Wahnsinns Modell,da passt alles.......

    @panzermann@panzermann5 жыл бұрын

    • Danke! Thank you!

      @builtbyWikander@builtbyWikander5 жыл бұрын

  • wonderful skillS

    @dingdongk03@dingdongk033 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • удивительно гусеничный тягач в виде модели да ещё и в масштабе 1/6 практически невозможно встретить танки в любых количествах и масштабах, а тягачей практически нет

    @BenzinB70@BenzinB704 жыл бұрын

  • Tan solo quería comentarte que haces un buen trabajo y felicidades por lo vehículos 😊👍

    @jordisalvados6210@jordisalvados62102 жыл бұрын

    • That's very kind of you, thanks a lot! 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Nice work! i wish my hand just the same as you.respect from China.

    @alexchan898@alexchan8984 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Super !!!!

    @francelibre1365@francelibre13652 жыл бұрын

    • Thanks!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Awesome job looks so real 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵

    @carloshnunez@carloshnunez2 жыл бұрын

    • Thank you! 🙌 Yeah, this is probably my favourite model!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Excellent!!! Such wonderful attention to detail! (P.S. -- Invading squirrels and stray cats beware! 😜)

    @ironwolfF1@ironwolfF13 жыл бұрын

    • Haha, yeah, they better watch out! 😆

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • Amazing workmanship! ... One design flaw I'd like to see rectified, and that is the way the Tilt is held or affixed in the box. Did Steyr actually install it that way? I have owned a few 1:1 VW T1 and T2 Pickup Trucks, both Sinka's and DoKa's and know the use of the side gates is the handiest feature of all. I would like to see the Tilt affixed to the bed and the back of the cab of the Steyr so the Tilt could stay in place even if the gates are all flopped down. I have bought a stock Tilt frame and made my own and both attach to the bed and the back of the cab. This is a niggling comment and please don't take it as a criticism, because I am in awe of attention to detail in bringing this rather obscure beast to life. I wish I had half your talent. Keep up the great work!

    @dongarnier5890@dongarnier58902 жыл бұрын

    • Thanks man! Do you mean the pipe-structure that holds the rear canvas? I think I freebased a bit on that one, have to consolidate my books. ☺

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • I don't understand why you have so few subscriptions... I wish you many, many more ;)

    @CallMeArek@CallMeArek2 жыл бұрын

    • That's kind of you, thanks!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Hallo, i'm fascinated!! I try to build my own RSO 1:10 - i know how much work it is to plan so many details. the chain looks perfekt. you gave me an incentive to continue with my model. maybe they could post some pictures. thank you

    @franzramskogler1077@franzramskogler10772 жыл бұрын

    • Hi there and thank you! Awesome that you are building a RSO, it's such a cool vehicle. Best of luck, and check out builtbywikander on IG for more pics!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • wow super :)

    @TheKilgore666@TheKilgore666 Жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Magnifique

    @laurentoutan9922@laurentoutan99222 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Erik, love the work. Are the filed for the tracks an wheels available?

    @justinschlottman4473@justinschlottman44733 жыл бұрын

    • Thank you! Not planning on releasing any files at the moment.

      @builtbyWikander@builtbyWikander3 жыл бұрын

  • I'm watching this and thinking ok this is awesome but maybe i could 3d model some of those parts and print them. Then he sculpts the cab. Lol. Nice work.

    @JustAnotherBigby@JustAnotherBigby2 жыл бұрын

    • Haha, thanks. 😊 And yes, a lot of the stuff I build by hand is probably printable, but I really enjoy the old school part of the project. Thanks for watching!

      @builtbyWikander@builtbyWikander2 жыл бұрын

    • @@builtbyWikander You are clearly a craftsman!

      @JustAnotherBigby@JustAnotherBigby2 жыл бұрын

  • perfectly

    @MilitaryRCModels@MilitaryRCModels4 жыл бұрын

    • Thank you!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Very 😎 👍

    @dennydanrc7844@dennydanrc78442 жыл бұрын

    • 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Wahnsinn....!

    @michaelhermann9990@michaelhermann99902 жыл бұрын

  • Outstanding work 👌 I just got to ask .. Would you ever make another one to sell ?

    @tannerjones9687@tannerjones96872 жыл бұрын

    • Thank you! 🙏 Not sure, actually - they take a bit of time to make. 😊

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Love to get my hands on thedrawings and dimensions

    @stevedelacruz3749@stevedelacruz37492 жыл бұрын

    • Hi, I model all my 3D-parts from drawings and measurements I find on the internet. If I need to, I buy a 1/35 scale plastic model as well. I'm using FreeCad as CAD software.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Outstanding! Did you generate the files from which the running gear was printed yourself?

    @wboquist@wboquist4 жыл бұрын

    • Thank you! Yes, I made them in FreeCad, a free to use software. Perfect for drawing mechanical parts. Thanks for watching!

      @builtbyWikander@builtbyWikander4 жыл бұрын

  • Started my 1.35 scale Das werk Dragon kit I've gotnthe flaps on the front grill as kits weren't accurate enough loads wee extras love the RSO this is great work how are your tracks holding up? Still think another one or 2 links you Would take that tension off what is it on the real thing 70 per side?

    @AFV85@AFV852 жыл бұрын

    • Hey man, thanks for watching! The tracks are doing great, and need a bit of tension to stay on the sprockets during Sharp turns. I'm working on a set on new tracks that looks a bit more scale.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Just amazing !!! What the dimensions of the bicicle gears ? I'm working on a truck project

    @victormatheus587@victormatheus587 Жыл бұрын

    • Thank you! The gear on the drill is the small plastic gear from a rear derailleur and the drive shaft gears are 14 or 15 teeth singel speed-gears. You can basically use all kinds of gears to get the speed and gearing you like.

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Wow great build. Can I ask, where yo got your hinges for the bed please?

    @martinbaker7502@martinbaker75023 жыл бұрын

    • Thank you! I made the hinges in FreeCad and printed them out on my 3D-printer.

      @builtbyWikander@builtbyWikander3 жыл бұрын

    • @@builtbyWikander thanks . I am really jealous of the skills you have

      @martinbaker7502@martinbaker75023 жыл бұрын

  • 👏👏👏são Paulo, Brasil!

    @joseagnaldodesantanasantan2812@joseagnaldodesantanasantan28122 жыл бұрын

    • 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Very F’n cool, nice job, what would you charge someone to build one minus radio controls

    @49BigPoppa@49BigPoppa2 жыл бұрын

    • Hey man, thanks! I'm not building on request, since they take a lot of time to make, but thanks. 🙏

      @builtbyWikander@builtbyWikander2 жыл бұрын

    • @@builtbyWikander how hard would it be to 3D the cab and associated parts? Need a bigger printer I’m guessing

      @49BigPoppa@49BigPoppa2 жыл бұрын

    • @@49BigPoppa I have tried to make the cab in FreeCad, but it's not handling the curved shapes very well... I'm sure it's doable with the right software and a bigger printer.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • why do you use plywood vs MDF? I use MDF as it's easier to work with. But i'm guessing this holds up better to getting wet and such.. thanks for letting me know. Awesome build.. this is one of my fav of yours.

    @mestapho2011@mestapho20112 жыл бұрын

    • Hi! My experience is that plywood is very stiff and durable thanks to its multi layer construction. I'm sure you can build with MDF as well, but plywood seem to work well, since it has cross-wise fibres, compared to the MDF. However, it wasn't a deliberate choice more than some inspiration from Rctankcombat.com Those guys use plywood with great results. I must agree - it's my favourite model too!

      @builtbyWikander@builtbyWikander2 жыл бұрын

    • @@builtbyWikander Thanks for the link friend. I will definitely check it out. Hope to see more builds from you in the future. A Jad would be a pretty sweet build.

      @mestapho2011@mestapho20112 жыл бұрын

  • Do you make your cad files from a 1/35 kit or do you have access to the blueprints?

    @dge4560@dge45602 жыл бұрын

    • Hi! I make my own CAD-models in FreeCad. I sometimes buy a 1/35 scale plastic model to look at, but mostly I find suitable blueprints on the internet. That, and a lot of reference pics.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Hello, I was wondering where you got dimensions for the parts here. I've been planning on making a 1:1 replica for reenactments since they're so rare, but wasn't sure if the 1:35 model was close enough to properly get measurements from.

    @volkermordinc.8822@volkermordinc.88225 жыл бұрын

    • Hi! I struggled with the dimensions. It seemed that all blueprints found on the internet gave different measurements and official numbers did not match the blueprints. I also contacted Technik Museum Sinsheim in Germany to confirm the L/W/H (they replied: ~4200/1800/2200 mm. However, it differs from other public sources). I finally went with one drawing that seemed about right, compared to the Italeri 1/35 scale mode, but since this is a hand-made model, I am sure some of the parts are more or less accurate. It sounds like a very interesting project you are up to! There is a guy in Norway restoring a RSO, maybe he could provide you with more info. Good luck! facebook.com/groups/321790801362585/about/

      @builtbyWikander@builtbyWikander5 жыл бұрын

    • @@builtbyWikander Thanks, I'll look into it! I believe there is one in the states, I may try to get in contact with the owner for some measurements. For now, I may get the Italeri 1:35 and use it as a base and go from there. If I make any progress, I'll keep you posted.

      @volkermordinc.8822@volkermordinc.88225 жыл бұрын

    • @@volkermordinc.8822 👍 Please do, would love to know how it goes.

      @builtbyWikander@builtbyWikander5 жыл бұрын

    • @ Volkermord - You might want to check with this private collector in the US: facebook.com/thegraebecollection/

      @wboquist@wboquist4 жыл бұрын

  • what kind of putty do you use and then sand it?

    @rctechnology1223@rctechnology1223 Жыл бұрын

    • Plastic putty, the kind you repair cars with. I think this was Plastic Padding.

      @builtbyWikander@builtbyWikander Жыл бұрын

  • Were do you get your prints?

    @jasonhardy291@jasonhardy2912 жыл бұрын

    • Do you mean the 3D-printed parts? I have a 3D-printer (made a video of it recently). If you mean the blueprints, I find them online and scale them to he right size.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • why do you use drills, when brushed electric motors are readily available for cheap?

    @aidansrc2724@aidansrc27242 жыл бұрын

    • Because you get a motor, a battery and a planetary gearbox for next to nothing. Saves a lot of time.

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • That was awesome job would you ever build and sale one

    @AaronJohnson-ql7kw@AaronJohnson-ql7kw2 жыл бұрын

    • Thank you! Well, not sure, since they take quite some time to finish. 😊

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • You really only relise the size in video when your airbrushing it haha! From thinking 1.35 painting them then this next to the airbrush yeh she's a big un!

    @AFV85@AFV852 жыл бұрын

    • Yes, but still carry-able despite being a 1/6 scale! 😁

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • BRAVO !!!! GOOD JOB !!!!! :) 👍🏻 + SUB !!! 😏 Regards - Paul P.

    @PP.EKOTECH@PP.EKOTECH2 жыл бұрын

    • Awesome, thanks a lot! 🙌

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • hi do you sale the file to build the rso thank you so much

    @acerG2828@acerG28282 жыл бұрын

  • Now that's what I call a campervan

    @r.srailfilms2559@r.srailfilms25592 жыл бұрын

    • Haha, right? 😁

      @builtbyWikander@builtbyWikander2 жыл бұрын

  • Man its great its posible send or sale Stl' s ?? Or where find IT??

    @stefanmacko5415@stefanmacko54155 жыл бұрын

    • Hi, thanks for watching! I am currently looking into the possibility to sell the 3D-printed parts, i.e the track assembly.

      @builtbyWikander@builtbyWikander5 жыл бұрын

    • @@builtbyWikander ok where you from I from Eu better for my is sale stl or g code matter of course only for my custom use i hawe 3d printer too or alternative nr2 change stl i hawe 1:6 rims and tres radios hetzer trakcks whels al in stl better for comunication its Fb messenger try find my on fb Stefan Macko its my name thx

      @stefanmacko5415@stefanmacko54155 жыл бұрын

    • @@builtbyWikander That would be a great idea. I would be interested in some parts myself.

      @charlesbauer6075@charlesbauer60755 жыл бұрын

    • @@stefanmacko5415 Hi Stephan. i came across your video today of your RSO and I am very interested in making the version that mounted a PAK 40 for this: www.rctankcombat.com. Can you send me the STLs for the trax and wheels please? Hit me up on FB messenger. BTW that was awesome work! My name is Martin Helsing

      @martinhelsing8960@martinhelsing89604 жыл бұрын

  • please tell me whats the music playing in 14:30?

    @prpl_k9290@prpl_k9290 Жыл бұрын

    • Sorry, I recognize it but don't remember the name. It is from KZhead Free audio library, as all my music. Probably one from the "Inspiring" genre.

      @builtbyWikander@builtbyWikander Жыл бұрын

  • WHY DONT YOU 3Dprint MORE PARTS? LIKE THE BODY?

    @MotoMUSEUM@MotoMUSEUM8 ай бұрын

    • Because it takes a lot of time to print big parts and I enjoy working with my hands. 🙂

      @builtbyWikander@builtbyWikander8 ай бұрын

  • 👍🎶🎶

    @funnytv348@funnytv3482 жыл бұрын

  • RSO amored With pak40 would be cool....

    @etienneriek9507@etienneriek95072 ай бұрын

    • Totally!

      @builtbyWikander@builtbyWikander2 ай бұрын
KZhead