Trailer Restoration - Repair and Restoration of my old Trailer
Trailer Restoration - Repair and Restoration of my old Trailer
If you want more of these videos and support our project, then you can become my Patreon: / mwig
It is no secret that any housewifely man should have at least one trailer or a scamp. I had such a trailer, vintage trailer, but his condition made me want the best.
My friends and neighbors constantly borrowed it from me and returned it with scratches and not in the best condition.
I wanted to buy a new trailer, but after seeing the prices, I quickly changed my mind. I decided to give a second chance and a second life to my old trailer, so my camper trailer rebuild project was started.
In this video, I will share with you my little trailer recovery project.
The restoration of the trailer was very interesting and the result exceeded my expectations.
Of course, I will be very happy to read your comments and listen to your opinion.
Don't forget to like and share the video.
And if you have not had time to subscribe to the channel, I advise you to do it immediately)))
respectfully MWIG
Trailer Restoration - Repair and Restoration of my old Trailer
Ваша, машен йа хьаьжни хьо?)
Изаа1 йирам йархьун цу цаа1 проблем ёцш 😂☝️
Х1инц ас кеч йеш видео чохь машен сан цхьа х1ум йеш ву со.
@@meanwhileinthegarage АЛЛАХУ АЬТО БОЙЛ, Брат ☝️☝️☝️
Амин, вай массер бойл са ваш.
No talking, no music, just the way a resto video should be. Subbed.
Wow! I've done a few trailer refurbs, but that was the most complete, thorough and professional job I've ever seen! Well done, superb workmanship. It's a shame you didn't go for LED lights, but that's a small observation. Great video! :)
I think trailers are great fun to restore. I bought an old home-built one, threw away the wooden box body (rotten) and used the axle and draw-bar to create my own with a welded steel frame (black) aluminium sides and back (yellow) for visibility, LED lights for reliability. Then I bought a motorcycle which couldn’t fit in the trailer, so cut the trailer body in half and put in another mid-section to make it longer. A project is never finished! I really enjoy all your stuff, thank you for good videos.Les in UK 🇬🇧
Цахьа БОРЗ ю и АЛЛАХУ АЬТО БОЙЛ ХЬА БРАТ ☝️☝️☝️
Амин, вай массер бойл са ваш.
Годный прицепчик получился.Отходы- в доходы.
Superb restoration and something totally different from what I’ve seen on other channels. A very enjoyable video, thank you.
Yes !!! You make my OCD (perfectionism) feel so much better... And you re-cycled / re-used other wood and materials. Very nice. Thanks for sharing...
Thanx buddy.
Уважение умной голове и умелым рукам👍
Талант! Покрасил и фанеру заменил. Гениально!
А чё ещё ты хотел? Чтоб он к телеге турбину приделал? Это же просто ресторация и только. Может быть даже заказ клиента.
One of the most underrated and best channels on KZhead. Great job!
Thnx mate.
Right On! I am in the process of restoring a trailer myself. I Really enjoyed looking at this process! Thanks!
Thanx mate.
@@meanwhileinthegarage 🏣🏣
Wonderful job you have done you now have the best looking trailer in the neighbor hood.
I 've got one of these trailers, it's an "ERDE". My sister in-law gave it to me for free!, but I had to buy two new tyres, as the old ones were damaged and old.Good resto my friend.
Thanx buddy.
Belgian quality work. Excellent.
Echt mooi dat je van zoiets ouds gewoon weer wat moois kan maken!
you made it look so good, I don't think it should be used to transport stuff! Awesome work dude. Also, I appreciate the fact that you don't do retakes of when things fall, we know that stuff will fall and you should not pretend it didn't just so you would make a perfect video.
Nice restoration, I should have used betonplex for bottom and side panels. Also use a breaker cable for hook up.
It is an unbraked trailer, required to have a safety cable or chain, not a break-away cable like overrun-braked trailers do.
I have zero doubt -- I would absolutely want you on my team for the Zombie Apocalypse.
It's also my hobby to restore something. And im enjoying watching you working. Also when things doesnt right i also whistle like you. 😅 good job brother. God bless
Thanks Bro.
Wow, the trailer turned out very nice!! Good color, repurposed wood, great job!
That was a great restoration of a nice trailer. The one thing I would have done differently is used LED taillights instead of incandescent. They are more reliable and last longer.
Helluva lot more expensive aswell.
@@GBOB68 I don’t think so. I used all LEDs on my home made trailer. Any way the biggest advantage is their reliability. Very often you see trailers here in UK with only half their lights working (or less). My LED units have been flawless for a number of years. Les in UK
@@leslieaustin151 I didn't mean you shouldn't do it. I've got LED's retro fitted on my own trailer. Hence the statement I made above. I personally wouldn't use incandescent bulbs on a trailer as the vibrations tend to kill them pretty quickly, which I've realised through experience.
@@GBOB68 OK.
Hi Meanwhile, super job on the trailer, looks just like new. Now you can get some REALLY BIG tools to restore. Stay safe and keep up the good work. 👍
Thnx mate.
Wow-nice job 👍🏼 I resto-d my utility trailer yrs ago and when mounting the fenders l loaded the trailer heavy then mounted the fenders -so l knew the tires would never bottom out into the fender wells
I just got my first trailer, little 4x8, it’s pretty beat up. I really enjoyed your video, it inspired me to re-deck and re-paint this thing!
Nice work great job I like the way the trailer looks now
J'adore les réstaurations continue comme ça tu gère
Ассаламу 1алейкум валах вацах Нохчо вукь хьо на 100% уверен что ты Чеченец)) ма ша Аллах хаз болх бу ахь бираг Аллах этто бойл хьа!
Ву Дал мукълахь. Амин, вай массер Бойл Аллах1 аьттов.
Well now, It turned out better than the last one.. Treated boards is the way to go, Nice job.
Отличная работа!!!
Love it, great job. The new ride height is much better!
Всегда приятно смотреть, когда человек что-то сам ремонтирует.
You are an artist go ahead👍👍👍
I love it! (if you hide your car licence plate - hide it allways :D) If I was you I add LED lamps to the trailer.
Thnx mate.
Why would you hide the plate, it’s on public display all the time?
@@joelmartin2549 Jus for fun :-))
@@joelmartin2549 I dont know why this youtuber hide it. Im not hide my license number If i upload my video with my car....
Qlimax Bass people can find out who he is and visit him unwanted? There is privacy u know
Wonderful work. Thanks for great video. Congratulations. Mitar
Technisches Wissen und hervorragendes Können pur 👍👍👍
Ассаламу 1алайкум! Ч1ох хаъ хьун и хумш👍😄
хороший голландский прицеп, у моего дяди такой же. уже лет 20 пользуется
Насчёт происхождения незнаю , но прицеп хороший. Пользуюсь уже 10 лет. Он и тогда он был старенький.
A lot of fun but hard work went into your excellent new improved Trailer , well done 👍
After just looking at your video, i went to the back of my shop i had one just like yours, over 25 yrs old.. Took it all apart and replaced the O-Rings works just great, only thing it weights about 80 Lbs,use to pick it up with one hand now i need a chain fall to help me lift it up.
Wow. good luck mate.
GENAU SO,reparieren anstatt verschrotten. Das ist nachhaltig.
Better than when it was new! Great job my friend!
Thanx my friend.
Дала аьтто бойла хьан.
Амин. Вай массер бойл.
Leuk dat je ook uit België komt!
Danku.
Great job
Дала т1аьхье беркате йойла! Дик болх бар.
Амин, Дал си дойл хьа са ваш.
👍👍👍 Красивая работа 👍👍👍
The splendor of your world brings it all that is beautiful
Nice restoration
nice work, same job i need to do after summer, i was thinking of putting aluminum plates in mine ( traanplaat ) in stead of wood . will be more expencive but wood i have in there now only lasted 2 years !
Tnx mate and good luck with your project.
Congratulations! You have done a really good job!
Thanx buddy.
If you can’t make something old look new again, you’re not a builder or fabricator… Great job on the trailer redo trailer!👍🏾👍🏾👍🏾🏆
Waauuu süperr 😱👏👏👏👌👌👍👍👍😘👌👌👏👏🌹🌹
Better than new!
Un grand bravo à toi mon ami ! Tu gères vraiment en bricolage 😊
Dam-those duo torgue style axles are worth more than the trailer in my country. And youre using a stick welder-top marks.cant beat a stick for a deep weld
Hi Where do you live?
@@mannym5692 New Zealand. Checkout trojan trailer parts(trailcom). Be seated first
Дала атто бойла. Отлично получилось. 👍👍👍👍👍
Great job in restoring it yes its a shame when others borrow things and you have to put it right well done
Все отлично,все под рукой.Молодец!
荷物を運ぶ時、最高に便利だよね。私も欲しいです。 It's the most convenient when carrying luggage. I want it.
Super job, behalve voor de kleur, hammerite zwart of hamerslag blauw jongen! Deze kan weer jaren mee
I salute you sir well done, thank you
Стильно, модно, винтажно) Не хватает мелочей
Хорошая работа!
Ficou show de bola. Vou reformar a minha.
The reclaimed wood is a nice touch!
Ма ша Аллах1 !!! Молодец. Приятно смотреть на хорошую работу. Отличный контент, ничего лишнего. Дала аьтто бойла хьа воша. Не обращай внимания на дизлайки- это делают конченные мудаки у которых больные, завистливые сердца! Желаю успехов и развития твоему контенту и конечно же каналу. 👍👍👍
Амин. Дал аьттов вай массер бойл са ваш.
I automatically hit the like button without even watching the video first. 😁 Love this channel. Great content. Continue the good work! 👍
Thnx mate )))
Ah, I know you.
Well done mate.👍
Thanx mate.
Turned out nice. Abit overworked for a utility vehicle but looks good! I did similar job to my 1969 trailer, but it had more frame rust and needed brake job and such. Will replace the wooden bed next year. Will do for now.
Thank you Buddy. Good luck in your project.
Ah ça fait plaisir de tomber sur un youtubeur belge qui partage son savoir faire ;) Et qui plus est, de très bon niveau ! Continue comme ça :)
🙋🏼♂️Muito Bom parabéns irmão 🙌🏻👍🏻🇧🇷
عاشت ايدك على عمل جميل ❤❤❤🥀🥀🥀
Great vid no rubbish music or frills really great ,, thanks for sharing ,, Mick UK
Your welcome.
Great job. I took mine apart to rebuild and apart it has stayed 😩 You've motivated me to return to it. What were the extra metal pieces you added early on?
Mooi gemaakt kerel.. serieus gereedschap heb je...! Groeten uit Holland.
Bedankt buur :-) Groetjes uit België
@@meanwhileinthegarage ha veel plezier en werkze nu met kar
elegant , easy , simple ...Well Done
thx Mohamed
Awesome transformation
Круто! Молодчина!
Super nice restoration, great job. Thanks for sharing your video with us.
Pintar sekali ya saudaraku ini.. saya suka melihat ini saudaraku..👍👍👍👍
Another great job. Thks for showing the project !!
I love seeing people rebuild instead of buy new
Super gut geworden
Great job. Reminds me of doing the same type of job on my home built trailer over the years since it was built in 1981. The new couplings we get here have a notice on them not to use the top holes for mounting just the side bolt holes. I think you should add side bolts as well and maybe make a D handle that uses the top bolts. Makes it easier to move around and you can also use it for a tie down. Nice job on bringing the trailer up enough so it tows level, makes the combination of trailer and vehicle look like someone cares. Also like the no music/talking format:) Thanks jb
Thanx for advice mate.
Very nice job. Have in mind that, by regulation, a trailer in Europe must have red reflective triangles on the back side and a safety steel cable or chain connecting the trailer and the trailer coupling on the car, as a safety measure.
My friend, thanks for the tip. In the meantime I have done everything to make my trailer fully compliant with legislation and regulations. Now he is completely ok. BTW there will soon be a video with my new project. Greetings
Meanwhile in the Garage do you have the id Plack on it I suggest to use your ID number my fellow belgian
Très beau travail.... félicitations !
I might get a job restoring a trailer like that with my everlast welder. I hope to get the job.
Did you get the job?
Fine repair and upgrade.
You have de knowledge to make a beautiful technical college for young people. Congratulations.
Hi bro 👋👋👋very good restoration 👍👍👍👍
thnx Bro
Don't forget to add a safety cable! It's the law!
I AM THE LAW! kzhead.info/sun/qtqDmb2qiZWchKc/bejne.html
Wow!! That looks really good!! You worked very hard on it, good job!
Ficou tip de mais mano. Parabéns.
Interesting axel. The hitch’s here I’ve seen use 4, 1/2” bolts. That doesn’t look very strong. I’m surprised it’s not attached through the sides.
I don’t know why I watched it, but it's damn interesting 😂
Лёха, А просто видос залипалово, вот и завис )))
@@meanwhileinthegarage можно больше таких видосов где ты какие либо прицепы приводишь в НОВОЕ состояние? Залипать 24/7 буду)) , и еще, я не знал что ты русский знаешь))
Прицеп у меня один, и состояние у него пока отличное)) Вот например сегодня залил видос в котором показываю как обновляю ручной пресс. kzhead.info/sun/jMajhZSgqXhse4U/bejne.html
@@meanwhileinthegarage посмотрю попозже) но лайк и подписку оформил))
Goe gedaan, die betonplex trekt op niks, mijne is al terug kapot. Ik ga volgende keer ook in hout doen 👍👍
Ja, dat is waar. Veel succes jonge.
many thanks to the master for his work!!!Класс!!!
Хороший у вас магазин запчастей. Прицеп хороший получился.
Да, спасибо друг.
من مخير
Gourin گشك ً.
Génial. Bonne continuation frère
WOW, such a interesting! Your rims are 13 inches, 4*98? Then its from Lada 1600! Earlier - fiat 125! Nice!
I don't know about size buddy. May be.