DIFFICULT TRUCK FRAME REPAIR

2021 ж. 8 Шіл.
2 146 330 Рет қаралды

✅ After the accident, a truck was brought in for repairs. As a result of the accident, the truck's frame was badly damaged. This car was brought from Novosibirsk. This suggests that a good master, wherever he is, is always in demand, and people are ready to spend time and money in order to get exactly to the master they trust.
In this video, I will show you, as a specialist, with extensive experience, repairs and straightens a damaged frame on a cargo berth.
Below I will leave contacts for communication with specialists in various types of freight transport repair.
Thank you all for watching. Special thanks to the channel subscribers.

Time codes:
00:00 channel splash screen
00:37 Preparation
02:20 Repair of the left side member
06:08 Repair of the right side member
24:08 End result

I share with you useful contacts:
✅ Repair of trucks and semi-trailers: +7 (916) -842-99-55
SITE: inforkom-trucks.ru/

✅ Shop of tools and equipment for service stations:
+ 7- (985) -700-09-09, inforkom-tools.ru/

✅ Sale of used and new spare parts, truck dismantling:
+7 (925) -000-21-11 (there is whatsapp)
inforkom-abcp.ru/ - online spare parts store.

✅ Cargo tow truck 24/7
+ 7- (985) -729-97-29 tel., Whatsapp, viber

✅ Diagnostics and repair of truck fuel systems
BOSCH or DELPHI + 7- (906) -642-74-76
instagram.com/bosch_inforkom

✅ Fuel cards Inforkom for individual entrepreneurs and legal entities.
7 tariffs, 5000 gas stations and the ability to refuel at a discount of up to 6% without service charges.
Detailed information: inforkom.ru/

✅ SITE of the Channel: razborgruz.ru/

✅ instagram.com/razborgruz.ru - We are in INSTAGRAM

✅ instagram.com/motors_truck Repair and Diagnostics of engines - in instagram
KZhead channel - MOTORS TRUCK









TRUCKS REPAIR
pakistani truck
engine repair
heavy trucks
truck crashes
cargo berth
frame straightening

Пікірлер
  • Ремонт грузовиков и полуприцепов: +7(916)-842-99-55 Магазин инструментов и оборудования для СТО: +7-(985)-700-09-09 , inforkom-tools.ru/

    RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 ай бұрын
    • Gjfvgdyy

      Agus DemonAgus DemonКүн бұрын
    • w

      Nexhat ShalaNexhat Shala6 күн бұрын
    • z

      Sebastián AlmeidaSebastián Almeida11 күн бұрын
    • zzzxxxxzzzzzźź

      Sebastián AlmeidaSebastián Almeida11 күн бұрын
    • @Ron Ron 👍👍👍 Hi You !

      Fresh LifeFresh Life13 күн бұрын
  • Exelent job..

    patrik patrikpatrik patrik6 сағат бұрын
  • Man take it to those middle eastern guys they will have it done in a couple hours 🤣🤣

    Albert RAlbert RКүн бұрын
    • Main quality)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIRКүн бұрын
  • Так и что? Ты же закаляеш раму, на сколько её хватит потом?

    Евгений рихардЕвгений рихардКүн бұрын
    • Хватит надолго

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR23 сағат бұрын
  • Great skills but that frame will never have its original strength.

    Robert AccorsiniRobert AccorsiniКүн бұрын
    • thanks Of course, there are losses. But they are not critical

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIRКүн бұрын
  • Volvo track şase side onarıyormusun. Volvo videosu atarsan sevinirim.

    Rahmi GullerRahmi Guller2 күн бұрын
    • Selam. Nasıl Volvo alırız - kesinlikle kaldıracağız

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Guessing you can’t buy or had made a new frame. Great work

    William TombWilliam Tomb2 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • 대단하다.....

    김남훈김남훈2 күн бұрын
    • 감사 해요

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Huge respect ✊😎

    Tim LazenbyTim Lazenby2 күн бұрын
    • 👍🏽👍🏽👍🏽

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Специалист своего дела, респект.

    Vova GurinenkoVova Gurinenko2 күн бұрын
  • Buddy, hats off to you. The custom tools are just insane! You my sir are a real Engineer!

    Sandeep VenugopalSandeep Venugopal2 күн бұрын
    • thank you)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • 3000 лайков , и моё почтение. Глаз радуется!!!!

    Сергей ЗадояСергей Задоя2 күн бұрын
    • Спасибо

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Сделали канечно отлично. Но задаётся мне что жёсткость всё равно не та!!!

    С КС К3 күн бұрын
    • Спасибо. Есть конечно потери. Но не критичные.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Such a different approach compared ko Paskitani truck repairs where the chassis is dismantled and brought to a machine shop for pressing. Both fun videos to watch.

    Haj JalotjotHaj Jalotjot3 күн бұрын
    • They work with a torch and a sledgehammer) We have more professional equipment)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Amazing 👏 tools and techniques from a smart man . Let me ship my westen star to your shop from America... Biden sucks fucken pice of shit..Putain great straight up man. Trump Same 2024!!

    Omni SURPLUSOmni SURPLUS3 күн бұрын
  • Pakistaní truck seal aprovv

    Mecánica Paso a PasoMecánica Paso a Paso3 күн бұрын
    • It's Russia)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR3 күн бұрын
  • круто конечно, но после таких повреждений, сохранятся ли свойства металла рамы?

    bamalamabamalama3 күн бұрын
    • Так сейчас не бывает.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
    • Продадут, не бит не крашен🤗

      Алексей НаумовАлексей Наумов3 күн бұрын
  • Well done. Mind blowing setup

    Radioactive 183Radioactive 1833 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR3 күн бұрын
  • Wow an Wow! This man is a master artist!!! I bet he could run a sausage mill backwards and create pigs if he wanted! So much going on here , like were he would use heat and where he just did the work cold ( I didn't expect him to use heat on the crimped top frame like he did, I may have learned somthing)? It looks amazing but is it as strong after all that metal working? At first look it seemed like it would be more cost effective to just get new frame rails? I am sure when this guy get done with a day of work he is not thinking, " I should go to the gym and work out"? LOL. Nice Vajayo!!!

    Art StudioArt Studio3 күн бұрын
    • Thanks for the comment. When the frame is heated, its strength properties are lost. Therefore, we try to do everything without heating the metal. We warm in exceptional cases - for example, to remove folds. Of course, there is a loss of strength with any repair, but they are not large. New ones cannot be ordered - as the car's number is filled with vines on the frame.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Техничный спец, виртуозно даёт вторую жизнь детали. Шедевр.

    Dmitry ADmitry A4 күн бұрын
  • kzhead.info/tools/sjK2KaF_2cAiuyaeYioZLg.html

    Ali AlsalomAli Alsalom4 күн бұрын
  • TU É BOM CARA PARABÉNS PELA POSTAGEM CÉSAR JATOBÁ PE

    Cesar AndradeCesar Andrade4 күн бұрын
    • obrigado amigo

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • 👍👍👍👍

    silvenas pociussilvenas pocius4 күн бұрын
    • 👍

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • Ja pierdolę!

    ROMEKCOMADOMEKROMEKCOMADOMEK4 күн бұрын
  • İyi işçilik

    Rahmi GullerRahmi Guller5 күн бұрын
    • Teşekkürler

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
  • my concerns are heating and cooling the frame metal, will that process cause premature fatigue in those parts, I know many frames are stamped "Do Not Weld" pm them,

    Ron KilmerRon Kilmer5 күн бұрын
  • No es mejor cortar el daño y renplasarlo esmas rápido

    Pedro Luis Velasquez cortésPedro Luis Velasquez cortés5 күн бұрын
  • Ekip işi biliyor teşkilatı tertibatı da eksiksiz

    MuhatapMuhatap5 күн бұрын
  • Молодец, мастер - рихтовщик! Титанический труд! Пакистанцы бы отрезали поведённые части рамы и вварили новые.

    Motosill GarageMotosill Garage5 күн бұрын
  • mantab.. ternyata luar negeri juga ada bengkel.. saya kira langsung dibuang.. terus beli baru

    astohar demakastohar demak6 күн бұрын
    • Sekarang mereka mengendarai mobil ini - tidak masalah)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Very good 👍

    정성진정성진6 күн бұрын
    • 👍

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • wow proper guys that know how to work with metal :)

    goose gregsongoose gregson6 күн бұрын
    • ))))

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Svaka čast ali tko može to naplatiti

    Lanej miškovLanej miškov6 күн бұрын
  • Just buy a new frame

    Benjamin SolorzanoBenjamin Solorzano7 күн бұрын
  • I am not Russian but I do enjoy your channel.

    Howard BHoward B7 күн бұрын
    • Thank you. I try to make videos for viewers from all over the world)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • i'm not saying the man can't do this i'm saying it's not worth it will bend again very fast

    james brownjames brown7 күн бұрын
    • Well, the car has been driving for 2 months without problems) We have been repairing truck frames for 10 years - there have never been any problems)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • Artesanía en estado puro

    JoseJose7 күн бұрын
    • Gracias

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • fantastique redressage !! Bravo ...

    Robert SalanonRobert Salanon7 күн бұрын
    • Merci

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • 👍👍👍👍❤❤❤❤🇮🇩

    Adi AjaAdi Aja8 күн бұрын
    • 👍👍👍

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • ЛЕГЧЕ НА СВАЛКЕ КУПИТЬ РАМУ КАК ЛОМ

    Миша ТайгаМиша Тайга8 күн бұрын
    • Вин на нее кто нанесет?)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • Amazing equipment with zero hammer and so so veri little heating process...

    Iwan YuswinartoIwan Yuswinarto8 күн бұрын
    • Thanks. We try not to use frame heating. We warm only in exceptional cases

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • it is necessary to take the tension of the steel with the last heat treatment. that's what we do in turkey

    Hakan gürelHakan gürel8 күн бұрын
    • @RAZBORGRUZ - TRUCKS REPAIR No problem at 600 degrees Celsius. we heat by induction

      Hakan gürelHakan gürel6 күн бұрын
    • We try not to groan the frame. Since after warming up, it loses its strength. We warm up in exceptional cases.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • Well done. My dad used to do truck chassis straightening 50 years ago. Basic tools compared to modern day. He had two parallel railway tracks embedded into the concrete floor as the base. And tools made to suit the job at hand. Always amazing what can be achieved.

    Glenn PGlenn P8 күн бұрын
    • Thank you for your comment) Good luck)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR7 күн бұрын
  • Professionnals !

    Jaba LehutJaba Lehut8 күн бұрын
  • kzhead.info/tools/dTROf88LS8pAM4L9L49ciA.html

    Phân Bón Buta (Buta Fertilizer)Phân Bón Buta (Buta Fertilizer)8 күн бұрын
  • Grandioso TRABAJO

    RafaelRafael8 күн бұрын
    • Gracias

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Great video, number 1 job, I also learned from experience, thanks.👍🏽👍🏽👍🏽

    赵David赵David8 күн бұрын
    • Thank you. All the best

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • А нафига, проще на разборе купить, народ ебанутый, и сколько продержится эта 'рама '

    Андрей КоцоевАндрей Коцоев8 күн бұрын
    • Сколько рама стоит с вином? Продержится долго. 10 лет людям рамы ремонтируем. Проблем ни у кого не было

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Кой смысл такого ремонта, если при следующий аварии водитель станет донором?

    УголёкУголёк8 күн бұрын
  • Ok thanks

    УЗБЕК техноУЗБЕК техно8 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Good job

    kouider djeribiakouider djeribia9 күн бұрын
    • Thank you

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Стоит ли эту раму восстановит ? Разве сталь не теряет своства ?

    Ариф ДжабаровАриф Джабаров9 күн бұрын
  • Immediate subscription!

    Lee HaeltersLee Haelters9 күн бұрын
    • Thank you friend!

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Thankfully this would not be allowed in the UK

    Dukes TTDukes TT9 күн бұрын
    • This is done with you, hidden in private services)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Настоящий мастер

    Егор РагозинЕгор Рагозин9 күн бұрын
    • Согласен с вами

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Primeira vez que vejo esse tipo de trabalho .

    Kevin WillianKevin Willian9 күн бұрын
    • 👍

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Greetings from Indonesia...Ini sekaligus mengejutkan pikiran saya bagaimana itu bisa efektif dari segi biaya, dan betapa terampilnya dia success always for you

    zuli yn channelzuli yn channel9 күн бұрын
    • Ya, dia pekerja yang baik. halo dari Rusia

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • бля это жесть)))

    General CosmosaGeneral Cosmosa9 күн бұрын
  • I'll be back

    o8thmano8thman9 күн бұрын
  • title should bb ''Refuses to pay for the frame''

    arsan zarmaevarsan zarmaev9 күн бұрын
  • Швырнул, так по скотски инструмент! Про доль седла бы тебе этой стяжкой. В целом 👍

    СибирякСибиряк10 күн бұрын
  • Ребята молодцы, не слов...

    деревенские самоделки Мирсановдеревенские самоделки Мирсанов10 күн бұрын
    • Скажите в каком регионе вы работаете?

      деревенские самоделки Мирсановдеревенские самоделки Мирсанов6 күн бұрын
    • Благодарим

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Good work,thank you for sharing 😎

    Sheryl BeasleySheryl Beasley10 күн бұрын
    • And thank you for watching)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Такую сложную и тяжёлую работу, выполняют только люди в тельняшке!

    Кием по лбуКием по лбу10 күн бұрын
  • This man knows his business

    Fred HaymanFred Hayman10 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • That’s a beauty!

    subbuildersubbuilder10 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • 👍👍👍👍👍

    Jorge Marta GoesJorge Marta Goes10 күн бұрын
    • 👍👍

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Какая глупость раму не ремонтировать, а менять нужно!

    Алексей ГригорьевАлексей Григорьев10 күн бұрын
    • Сколько стоит поменять?)

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Only in Russia. Low wages and no road safety standards. Truck and 4x4 chassis are made with special alloys of steel and heating them to red hot alters their properties. I'm not too worried about it bending in a future accident but rather it cracking and then failing months or years later during normal operation

    James AllenJames Allen11 күн бұрын
    • Hi. Well, we have been repairing truck frames for 10 years. A very large number of them have been repaired. After repair, cars run without problems. There are frames - which cannot be repaired or it is pointless. And such a frame is repaired well.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Ellerine sağlık muhteşem oldu ustam

    Murat TokdemirMurat Tokdemir11 күн бұрын
    • teşekkürler arkadaşım

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Now that was one amazing job

    jerry smithjerry smith11 күн бұрын
    • thank you my friend

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • I wish I could work next to or with others, who actually knew what they were doing. Just shut their mouth and work.

    el googel goog11 күн бұрын
  • Amazing skills!!!

    Scott ThomasScott Thomas11 күн бұрын
    • thank you friend

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • He is really genius amazing work 👏

    Kamaljit SinghKamaljit Singh11 күн бұрын
    • thank you friend

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Impresionante sr es usted un MAESTRO

    Juan PerezJuan Perez11 күн бұрын
    • gracias amigo

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Good~!!!

    DJ LDJ L12 күн бұрын
    • Thank you. We are glad to try our best for you

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Muy biieeenn amigo te felicito desde ARGENTI A GRAN ABRAZO

    Flavio CorradiFlavio Corradi12 күн бұрын
    • Gracias. Saludos desde Rusia

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Мастер «небитых, некрашеных»

    Basmach AbrekovBasmach Abrekov12 күн бұрын
  • OMG This Guy is worth his weight in Gold, I have never in all my Life seen a Guy with so much dedidcation to His work and being an Ex Trucker myself I would feel as safe as houses driving a Vehicle repaired by Him, his knowlage is beyond reproach

    Adam HewlettAdam Hewlett12 күн бұрын
    • Thank you very much. Greetings from Russia. Best wishes to you

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • guy has serious skill, but i wouldnt want to drive this thing after such deformation.

    KeepKeep12 күн бұрын
  • American truck frames don’t have that many holes in the frame.that weakens the frame.but much skill

    Steve SullivanSteve Sullivan12 күн бұрын
    • Holes for lightening the frame

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Нет денег,надо выправлять.мужик конечно знаток своего дела.печалит еще и тот факт что инструмент, да наверно и станки импортные.

    Nikolay PervakNikolay Pervak13 күн бұрын
    • В данном случае стапель делал он сам.

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR2 күн бұрын
    • Ага щас. Он думаешь за спасибо будет делать

      Basmach AbrekovBasmach Abrekov12 күн бұрын
  • Once it’s pulled does it need to be annealed ?

    Just JasonJust Jason13 күн бұрын
    • There is no need

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • good

    สมบูรณ์ วินิจพิทยากุลสมบูรณ์ วินิจพิทยากุล13 күн бұрын
    • thanks

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Excelente trabajo...un artista!!!!

    Daniel EscalanteDaniel Escalante13 күн бұрын
    • gracias amigo

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • Brawo!!!!ani razu nie było młotka

    t72 t72t72 t7213 күн бұрын
    • Dzięki

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • I have to be honest I was like no way he will straighten that frame . Amazing work

    Ken PrevattKen Prevatt13 күн бұрын
    • thank you friend

      RAZBORGRUZ - TRUCKS REPAIRRAZBORGRUZ - TRUCKS REPAIR6 күн бұрын
  • I've worked with metal for decades in various capacities and I think straightening a bent object is about the most satisfying task there is. Impressive work shown here, I enjoyed it.

    Donald OehlDonald Oehl13 күн бұрын
  • Perfekt.

    Onkel TOnkel T14 күн бұрын
  • Tak myślałem że takie rzeczy tylko w Rosji.Brawo super robota i facet wie co jak ugryźć.

    Andrzej ZawislakAndrzej Zawislak14 күн бұрын
  • This guy is one incredible talented Man Obviously very experienced It is a pleasure to watch you work.. Much Respect !! Cheers 🍺🍻

    R horR hor14 күн бұрын
  • 谢谢分享💕

    wilson nguiwilson ngui14 күн бұрын
  • не проще было бы швелеры заменить? так и надьожние было б. индусы так делают.

    vs vsvs vs14 күн бұрын
  • Ancient skills and not one person following helping or learning the craft. Looks like he’ll take these secrets to the grave.

    D JD J14 күн бұрын
  • Amaizing work. 👍👍👍

    Ophir Memories & IllusionsOphir Memories & Illusions15 күн бұрын
  • Very impressive. That repair took skill, and patience, something that isn’t learned over night.

    Rob AllenRob Allen15 күн бұрын
  • Еще бы подсказали стоимость рамы и стоимость правки рамы.... и у всех вопросы сами б отвались...😁👍👍👍

    Федун ФедунковФедун Федунков15 күн бұрын
  • Lindo de ver. Parabéns ao profissional

    Fabio SantanaFabio Santana15 күн бұрын
  • Отличная работа!

    Игорь33RUS КиселевИгорь33RUS Киселев15 күн бұрын
  • É o tipo de serviço que requer muita paciência e pessoas detalhistas. O homem que trabalha nisso precisa ter boa saúde e disposição. Uma pergunta. Esse tipo de serviço é realizado para seguradoras, ou são os particulares?

    Eduardo VenturaEduardo Ventura15 күн бұрын
KZhead