Megger DCM305E EARTH LEAKAGE CLAMP METER
0.001 mA resolution
Up to 100 A range for standard AC current measurements
TRMS reading
Low pass filter to aid stability of readings
Auto, data and peak hold
40 mm jaw
Analogue bargraph display for trending
The DCM305E is perfect for identifying and measuring the earth leakage current in a circuit where the RCD keeps tripping out unexpectedly. The measured result will quickly identify whether the earth leakage current present is excessive, causing the RCD to trip, or if the RCD itself is over sensitive or faulty.
Specially designed to check earth leakage currents, the DCM305E is an efficient and highly versatile instrument. It has six ranges 6 mA, 60 mA, 600 mA, 6 A, 60 A, 100 A with a minimum resolution of 0.001 mA on the 6 mA range. Its upper range also enables TRMS AC current measurements up to 100 A.
Additionally, this clampmeter vastly improves measurements on circuits with harmonics/electric noise on the cables using a low pass filter of 50/60 Hz.
Safety is of the utmost importance and with that in mind, the DCM305E exceeds the latest safety design standards IEC1010-2-32 and EMC requirements through a series of safety features that provide you with a safer working environment.
Other key functions include the “Data Hold” feature which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life.
IN THIS VIDEOThe Megger MFT1741+ Multifunction Tester is suitable for conducting full single- and three-phase insulation testing. As indicated above it is able to conduct single- and three-phase RCD testing between 10mA and 1A.
The Megger MFT1741+ Multifunction Tester’s NEW non-trip loop impedance testing technology also enables loop impedance testing of 10mA type AC and A RCDs. Additionally, NEW non-trip loop impedance technology prevents RCDs influencing the total loop impedance value and increases the speed of testing: non-trip loop impedance tests can be performed in eight seconds.
Furthermore, loop impedance tests are accompanied by a Confidence Meter, a NEW feature present on the Megger MFT1741+ Multifunction Tester. The meter will indicate the degree of confidence in the accuracy of the loop impedance measurement. This feature is useful as loop impedance values are particularly susceptible to changes in circuit noise. The Confidence Meter is designed to improve reliability; the digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise.
Another NEW function present on the Megger MFT1741+ Multifunction Tester is its ability to test electric vehicle charge point RCDs; it includes automatic test sequences and a 6mA DC test (requires OPTIONAL accessory) for this purpose.
Measurements are viewable via the Megger MFT1741+ Multifunction Tester’s large, clear backlit display with a digital/ analogue arc for indicating fluctuating readings and a dual digital readout that displays precise readings and test parameters in parallel. For instance, the dual digital readout will display the output voltage used for the insulation test as well as the resistance value in MΩ. It is also possible to save readings to the Megger MFT1741+ Multifunction Tester’s internal memory (capacity for 1000 measurements); these results can be downloaded via Bluetooth.
Accessing the required measurement function and range is easy using the Megger MFT1741+ Multifunction Tester’s colour coded function controls. In addition to improving the efficiency and ease of testing, these controls also reduce the possibility of selecting the incorrect function or range. This instrument does not include complicated and/or hidden measurement menus.
Furthermore, the Megger MFT1741+ Multifunction Tester features an ambidextrous design with dual TEST and LOCK buttons on either side of the unit, ensuring that it is easy to operate for both right- and left-handed users. Moreover, the Megger MFT1741+ Multifunction Tester offers an automatic test start, removing the need to press the TEST button altogether. This function is particularly useful when holding probes and/or when using the Megger MFT1741+ Multifunction Tester whilst on a ladder.
IN THIS VIDEO
Electrician Amazon store - www.amazon.co.uk/shop/willsel...
FOLLOW US ON SOCIAL CHANNELS:
INSTAGRAM: / willselectricalservices_
TWITTER: / electricalwills
FACEBOOK: / willselectricalservices
TIK TOK www.tiktok.com/@electriciantv...
WEBSITE - willselectricalservices.co.uk
Electrical Work Needed - Get a Free Quote - Info@willselectricalservices.co.uk
That megger miliamp tester is one of my favourite test instruments! Completely agree with ya!
I bought that megger tester for a particular fault finding job and it paid for itself after its first use.
Another cracking video Will and definitely worth a watch is the GSH video demonstrating a break out lead. Keep em coming mate 👌
I agree with a few of the comments that it would be nice if you slow just a little. No disrespect ment. I am a spark and always watch videos to improve myself and my knowledge but it was difficult to take in what you were explaining because it was to fast and jumbled. Appreciate the time you have taken to make this video though.
To be honest Terry it probably wasn’t one of my best videos on them but at the end of the day I’m electrician not a presenter so no offence taken whatsoever.I enjoy making the videos are away the problem I found when making this video was trying to talk to electricians and trying to disguise what I was saying. So anybody with less experience didn’t really cotton on to what I was saying I know this sounds bizarre but it makes sense if you watch my video of this weeks KZhead comments
@@ElectricianTV good on you mate for taking constructive criticism. Who knows we may see you on mainstream TV one day. This is the first I’ve watched of your videos but I’ve liked, subscribed and will be watching more
Will you’re 100% qualified to teach mate! You’ve taught me a thing or two 😉… keep up with the quality vids!
Thanks a lot mate
Class video William!! Class bitta kit!!
Another great vid. Would be good to see the megger in action though.
👍👍👍
Great tech tip, I'll buy the cheapy one 1st, and then probably buy the mega
Make sense mate 👍🐝⚡️
Hi . I do fault finding as my day to day job. I usually just use insulation resistance to fault find. Trying to see if buying one of the clamp meters would make it quicker and and make life easier
Without a shadow of a doubt. Game changer
It’s one of those tools you buy and wished you’d always owned
An insulation resistance tester injects DC into de energized wiring and so it misses leakage current of downstream devices and also capacitance leakage.
We weren't born with the knowledge. If we don't share information as a trade or skill we are doomed
Cheers mate thank you
👍👍👍 2 core flex and trailing socket for leakage testing??
I just have a extension lead socket strip on which i have opened up the flex cable and test line and neutral omitting cpc.
So if a piece of equipment is tripping the circuit due to alot of earth leakage whats the best thing to do? Put it on the other rcd side if it's dual rcd? It doesn't mean the equipments faulty does it?
If the fault is Global across the whole consumer unit then I would suggest you put them on an RCBO consumer unit and spread across the whole lot.If it’s all on one circuit Then I would look into it further if you see the link on the video for E5 it tells you the maximum Values you’re allowed per appliance.
@@ElectricianTV thanks alot matey
Looked at the Megger but seems damn pricey for what it is. Seemed like you could probably get an equivalent for a third of the price, but then I've not used any to know what the actual differences may be.
Reliable readings 👍👍👍 plus quality
I'm all for brand loyalty, but I got the ethos one around 18 months ago and it's been spot on.
Midfielder always love your video's but trailing lead with earth taken out ????? I think i know what you mean , but it needs more clarification . Not that I could present any better but Will some info seems a bit woolly/Vague. Keep making the Vids please.
I appreciate that I’ve basically had the same conversation with one of my friends on the phone and he said he said the same thing one of the problems is is that I don’t feel that comfortable giving too much away just in case a customer who has less experience tries to follow advice by disconnecting neutrals.If there’s anything in particular you would like me to cover I will bring it up on my Friday show will be answering peoples questions I’m more than happy to do it on that video as it would not have resemblance to this video
@@ElectricianTV efixx did a good video showing just what you said . Nice finger action with the clamp by the way
@@richf2921 The finger blaster 2000
@@ElectricianTV 👍👍💥 You deserve more subs Will , power to your channel
If your worried about teaching diyers then use terms only an electrician knows and don’t break it down in simple form so other electricians such as myself can learn off eachother rather than keeping things close to heart
Actually, why do you use the word 'actually' so much??
Because I actually really like the word mate, it’s just a hobby, it’s not scripted
Clearly you do. Ad nauseam!
I heard a load of baffle not explained clearly at all.
Thats a shame this video was for electricians
Can you please do this vid again... IN ENGLISH 😳
That’s a shame you didn’t enjoy it
This was in Queens English. I suggest you pay better attention next time.
Rubbish moving on his foots a lot not relax guy ❤🎉