KZhead

Master Mechanic Restores A High-capacity Air Compressor Forgotten Perennial // Full Restoration

Restorations Skills
2023 ж. 17 Қаз.
1 024 398 Рет қаралды
Жүктеу

► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
Master Mechanic Restores A High-capacity Air Compressor Forgotten Perennial // Full Restoration
► Subscribe to channel: bit.ly/43ijIvt
►Restoration: bit.ly/3WLFBAA
© Copyright by Restorations Skills
#RestorationsSkills #Restorations #Skills

Пікірлер

  • Air Compressor Tank should be check and inspected by authorised competent person to ensure that the fitness of the tank are in good working condition to prevent tank explodes if the machine is to be re-used again. Good job man.

    @Ismail6235@Ismail62354 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • How did you fix the rust in the air compressor cylinders?

    @richardbaumeister466@richardbaumeister4666 ай бұрын

    • I don't think he did,for a compressor this size it didn't build very much air pressure. I'd be interested to see how much pressure it will build and hold after running 5 minutes. As rusted as those cylinders were I'm pretty sure it's got blow by issues.

      @william6526@william65266 ай бұрын

    • Probably a good thing with those tanks the way they are.... BOOM@@william6526

      @richardbaumeister466@richardbaumeister4666 ай бұрын

    • I did not see any honing of the bores, not even any pre lubing

      @glennfryer1539@glennfryer15396 ай бұрын

  • Luar biasa lestorasinya berjalan dgn lancar ,top markotop

    @Fold5-xm1qu@Fold5-xm1qu16 күн бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills496716 күн бұрын

  • The rust is real but the vines are fake, no need to makeup, the guy is skilled. That's all that matters, won my like.

    @cicerolima7410@cicerolima74104 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49674 ай бұрын

    • @@restorationsskills4967 @ ,

      @JowelRanaRana-ge9vz@JowelRanaRana-ge9vz4 ай бұрын

  • I love watching your videos ,no drama just great videos of a person who has great skills working with minimal tools. Your videos are some of the best on any site I watch on utube. But the compressor for its size with 3 cylinders to compress air didn't build up much air pressure.

    @william6526@william65266 ай бұрын

    • No

      @aurelianomamani3676@aurelianomamani36764 ай бұрын

    • 😅

      @tarkoredmi1763@tarkoredmi176311 күн бұрын

    • ZiQkRi

      @tarkoredmi1763@tarkoredmi176311 күн бұрын

  • Brasil

    @marcusvinicius2022@marcusvinicius20226 ай бұрын

  • You need a sandblaster

    @PlaneManHehehe@PlaneManHehehe4 ай бұрын

  • the second part of this video was way over my head. I learned so SO much Thank a bunch Granny 92 USA.

    @joanlittle4235@joanlittle42356 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Con xe tải biển quê e luôn ❤ Xem kênh của các anh rất cuốn nhé. Ủng hộ các anh 👍🏻

    @NguyenQuang-kp5qw@NguyenQuang-kp5qw6 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • An old machine perfectly restored and working well! Congratulations ! It's great I'd like to see more videos like this !!

    @Panhhuachan25@Panhhuachan256 ай бұрын

    • Thank you very much. We will try to perfect more products.

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • ❤

      @carlosachicanoy7752@carlosachicanoy77526 ай бұрын

    • ❤❤😂😅

      @carlosachicanoy7752@carlosachicanoy77526 ай бұрын

    • This definitely NOT a perfect restoration!!!

      @haldie94@haldie946 ай бұрын

    • Restauração perfeita coisa nenhum. Muita porrada nos rolamentos novos, parafusos enferrujados e por aí vai

      @Desiludido79@Desiludido795 ай бұрын

  • I always enjoy your videos. This one from start to finish was very interesting. Thanks for sharing looking forward to your next project..

    @Shagnasty@Shagnasty6 ай бұрын

    • Thank you very much. Wishing you and your loved ones good health

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • @@restorationsskills4967thank you for saying that. I wish the same to you and your family.

      @Shagnasty@Shagnasty6 ай бұрын

  • Perfectly good way of hammering in new ball bearings.

    @Sigma33sailor@Sigma33sailor4 ай бұрын

    • Belo compressor já nao existe disse restaraudo e uma loucura!

      @user-zs2gi9qd8p@user-zs2gi9qd8p4 ай бұрын

  • Congratulations. Hope you release more products🎊🎊

    @Quyn279@Quyn2796 ай бұрын

  • Un saludo afectuoso,para los mejores mecánicos que hay en KZhead...desde CHILE Bendiciones

    @CARLOSCONTRERAS-or4ub@CARLOSCONTRERAS-or4ub3 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49673 ай бұрын

  • Hats off to you man.. that was a fantastic bit of work you done.. simply outstanding 👏 👌

    @Markmckwn@Markmckwn6 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • That is the prettiest boat anchor I have ever seen. Please remove oil and fuel befor useing.

    @daronsteele7976@daronsteele7976Ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills4967Ай бұрын

  • I have a question for you. What is the name of the spray you use on those persistent old rusty nuts and bolts that refuse to come loose? I've seen you use it in many other videos.

    @warrenlancaster9305@warrenlancaster93056 ай бұрын

    • That is Selleys RP7 anti-rust and lubricant spray bottle made in Australia

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • nice to see some primmer before top coat of paint

    @user-iv2uc8nf8y@user-iv2uc8nf8y6 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • The work was fantastic and your channel is great. The only caution with this compressor would be the pressure relief valves.

    @wazzazone@wazzazone6 ай бұрын

    • Thank you very much. Wishing you and your loved ones good health

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • That first part was awesome great work now the second part .

    @abelpadilla7789@abelpadilla77893 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49673 ай бұрын

  • Состояние цилиндров не мешало бы оценить с помощью микрометра, похоже компрессор имеет сниженную производительность. Спасибо за интересный ролик!

    @rollcatt@rollcatt4 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49674 ай бұрын

    • какой микрометр, вы чего? Они подшипники молотком забивают, куда им микрометр... Если бы я так работал, меня бы пристрелили давно...

      @Loadrunner67@Loadrunner674 ай бұрын

  • Compared to other restoration videos this guy is toward the top of that list. Yes I would have concern also about the relief valves.

    @d.l.simpkins-ht8vy@d.l.simpkins-ht8vy6 ай бұрын

  • never knock the tab washer over on fly wheel

    @user-iv2uc8nf8y@user-iv2uc8nf8y6 ай бұрын

  • Quando ele bateu nos rolamentos com o martelo doeu até meu coração kkk. Use uma chave soquete para fazer isso meu amigo, assim vc bate por igual nos rolamentos.

    @ewertonlimamacedo8310@ewertonlimamacedo83104 ай бұрын

    • Thank you very much my friend

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • I wish I could be a excellent mechanical engineer like this guys, so mesmerizing” and learning from watching it, amazing ❤😊

    @Nepukosweno@Nepukosweno4 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49674 ай бұрын

    • @@restorationsskills4967 surely I will 😊😇

      @Nepukosweno@Nepukosweno4 ай бұрын

  • Gostei pela restauração parabéns!!

    @luizblachineto7490@luizblachineto74903 ай бұрын

    • Thank you very much. Wishing you good health. Please follow and support us!

      @restorationsskills4967@restorationsskills49673 ай бұрын

  • Only on the last job he used the plyer the right way.

    @jankamp8177@jankamp81776 ай бұрын

  • Nice Job.

    @cecilcooper6210@cecilcooper62106 ай бұрын

    • Thank you very much. Wishing you and your loved ones good health

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • very nice videos !

    @HoucineAimrane@HoucineAimrane6 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Muito bom. Somente sugestões:: Não se bate diretamente em rolamentos. Brunir camisas dos cilindros motor e compressor... Usar óleo para montar as peças pistões e cilindros. E pra finalizar nas conexões flangeadas das tubulações de ar não se usa fita veda rosca, não tem nenhum efeito. Abraço

    @albatecnica3545@albatecnica35455 ай бұрын

    • Thank you very much. Wishing you and your loved ones good health

      @restorationsskills4967@restorationsskills49675 ай бұрын

    • 😊😊

      @user-rc9ks7up4p@user-rc9ks7up4p2 ай бұрын

  • Восстановить такой агрегат что бы накачать колёса. Простым насосом не пробовали?

    @Svarschic-ye8zn@Svarschic-ye8zn6 ай бұрын

    • it can be used for quite a few things. because its capacity is quite large. we just resurrected it

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Pls my machine consumes engine oil daily and it's still new but looses alot of oil on crunksharf breather

    @meshackkemboi9741@meshackkemboi97413 ай бұрын

  • did you flush the tanks out

    @user-iv2uc8nf8y@user-iv2uc8nf8y6 ай бұрын

  • E bom vê esses vídeos de restauração de de motores e de carros

    @user-ef9ww3vv9q@user-ef9ww3vv9q6 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Awesome job on the on welding those parts together

    @abelpadilla7789@abelpadilla77893 ай бұрын

  • Very good🎉

    @Tonydeep1222@Tonydeep12226 ай бұрын

  • You did a great job, the machine is beautiful, you are very talented. An old machine that has been restored to perfection and works great! Congratulations ! It's great. I want to see more videos like this!!

    @RestorationVideo@RestorationVideo6 ай бұрын

    • Thank you very much . Please always support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • за такой некачественный ремонт надо руки отрывать! подшипники заменили с помощью молотка😂, весь инструмент один молоток! нет сьемников, и остального инструмента. Поршень зарядили кольцами с помощью отвертки. Ужасный ремонт, некачественный. Цилиндр ржавый был при сборке. В общем просто почистили и покрасили. это не ремонт а просто переборка кое как😂😂😂. я такому мастеру не доверил бы даже детский велосипед!!!

      @user-cn6vv9xr4n@user-cn6vv9xr4n6 ай бұрын

  • Beautifull

    @eliasmendez511@eliasmendez5116 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Teflon tape not needed on a tapered joint.

    @cecilcooper6210@cecilcooper62106 ай бұрын

  • 13:26 Was this crack due to water freezing in it and expanding?

    @jimthesoundman8641@jimthesoundman86416 ай бұрын

    • Thank you very much for your comments. It had been neglected for quite a while and over time it had expanded

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Two thumbs up great job.

    @gregb76@gregb762 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • Very nicely done.

    @galas455@galas4556 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Excellent fix thanks

    @rayhewitt4688@rayhewitt46886 ай бұрын

  • Are you going to upgrade the better wheels and axles later

    @PlaneManHehehe@PlaneManHehehe4 ай бұрын

    • Yes. We will upgrade them so they work and move better

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • Nakarrara takachima😊

    @marcusvinicius2022@marcusvinicius20226 ай бұрын

  • Cylinder sleeves on well used air compressors(or ones sitting out in the weather for 25 years) are always the first to get worn(or rusted) and cause little air compression, maybe new rings on the pistons will hold for a few uses but not for long.Why not just get them bored out at a machine shop if you're going to all this trouble. I call this guy the paint mechanic,make it look pretty and it fixes any piece of junk!!

    @billfry5513@billfry55134 ай бұрын

    • Those poor bearings, that was painful to watch

      @tonto8029@tonto80294 ай бұрын

  • Using the old bearing to beat in the new one is a good way to go sometimes.

    @VenturiLife@VenturiLife4 ай бұрын

    • Thank you. That's a good idea too

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • GREAT ❤️ JOB MY FRIEND *****

    @bobbyjohnson4734@bobbyjohnson47342 ай бұрын

  • Good job ❤❤❤

    @user-wq9gm1gq9g@user-wq9gm1gq9g2 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

    • @@restorationsskills4967 👍👍👍🥰🥰

      @user-wq9gm1gq9g@user-wq9gm1gq9g2 ай бұрын

  • Parabens pelo bom trabalho!

    @reutilps@reutilps6 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Very good video, I really like it ❤❤❤

    @Woodworking.Channel471@Woodworking.Channel4716 ай бұрын

    • Thank you so much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Nimeipenda sana hii video ❤

    @yassinchuwa8824@yassinchuwa88242 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

    • Don't worry broo!! Pamoja💪💪

      @yassinchuwa8824@yassinchuwa88242 ай бұрын

  • Parabéns!!Seu trabalho é simplesmente maravilhoso.

    @joaolouvemjunior291@joaolouvemjunior2914 ай бұрын

    • Thank you very much my friend

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • what engine is that, thank you

    @johnhart1410@johnhart14104 ай бұрын

    • Diesel engines are used for many different types of machines

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • Inpresionante el soldador de metal untrabajo muy bueno 😊

    @erikvillalonjuarezjuarez3135@erikvillalonjuarezjuarez31352 ай бұрын

    • Thank you very much.

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • Classic job done

    @nanakofimensah5407@nanakofimensah54072 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • Para fazer uma reforma dessas tem que ter bom conhecimento de mecânica.

    @valtairantoniomenin1785@valtairantoniomenin17856 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Great clean up and reassemble job, but c’mon guys. That’s a full workshop compressor, surely you could have run some heavier hose and a one inch impact on a few huge rusted truck lug nuts to give it a workout?! It’s a little big to be using to fill up tires or soccer balls isn’t it? I’ll give you one 👍🏼 for the restoration, but you’d have to prove it’s worth for the other one😉

    @JDLarge@JDLarge6 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • YOU MEN AMAZING WORKERS *****

    @bobbyjohnson4734@bobbyjohnson47342 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • Estes vídeos são feitos em qual país?

    @Daryldixon2410@Daryldixon24104 ай бұрын

  • Ráp xì ron bình nước rồi.

    @hoaithanhnguyen4348@hoaithanhnguyen43484 ай бұрын

  • New ball bearing monted with hamer, good job!

    @emilburuiana3997@emilburuiana39976 ай бұрын

  • Just a suggestion get a dead blow hammer with a lead or copper head for pounding in the race ball bearings. Pipe of a similar size to the shaft is better than a driver. When you assemble the pistons you were putting in the gudgeon pins while the piston was contacting the steel bench. Take more care and you will get more respect.

    @timharris6835@timharris68356 ай бұрын

    • Thank you for your feedback so we can better improve future products. Wishing you and your loved ones good health!

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • I nearly cried watching those bearings smashed in like that.

      @tonto8029@tonto80294 ай бұрын

  • Why don't use paint stripper instead of wasting electricity??

    @karanaz2008@karanaz20086 ай бұрын

    • We will try to improve the product further.

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Inspite of the negative comments. I think .they did a great job! The parts they're hammering on are way tougher than you think.

    @stevenguthrie2835@stevenguthrie28355 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49675 ай бұрын

    • I qw w​@@restorationsskills4967

      @user-he7zf4tq9n@user-he7zf4tq9n4 ай бұрын

    • Pior que 5 moro,de lona é muito caro.

      @bomdiapatodosboanoite3137@bomdiapatodosboanoite31374 ай бұрын

  • Invest in a press so you don't have to beat up the bearings with a hammer.

    @user-pr4sd3ew3m@user-pr4sd3ew3m4 ай бұрын

    • We are also planning that. Thank you

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • once again great job i enjoy your work

    @leongwat1@leongwat16 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • When he is a master mechanic,the first thing he have to do is going to a real master Who know how to used his tools

    @jankamp8177@jankamp81776 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • What a pleasure ❤ too watch a skilled tradesmen work!😂

      @michaeladams3421@michaeladams34216 ай бұрын

  • Podrian haber cambiado el manometro...

    @Bloxicata@Bloxicata6 ай бұрын

    • Are not . We found it near the machine

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Wo😮 that’s amazing

    @poekya1399@poekya13996 ай бұрын

  • трясётся как меркель.🤣🤣

    @DEMON23027@DEMON230276 ай бұрын

  • Chlapy super práce.

    @200745VaclavDubsky@200745VaclavDubsky6 ай бұрын

    • Thank you very much

      @restorationsskills4967@restorationsskills49676 ай бұрын

  • Waduh parah bearing main gedor aja,ya rusak duluan 😁

    @herryhere6368@herryhere63686 ай бұрын

  • Good stuff but hammers and bearings is not a great mixture

    @guypigache2105@guypigache21054 ай бұрын

  • Mantap

    @marinomarbun7654@marinomarbun76545 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49675 ай бұрын

  • Esto es nada mas desarmarlo lavarlo pintarlo y volverlo a a armar cual restauracion

    @sirarthur4388@sirarthur43882 ай бұрын

  • He didn't wash the grinding paste off after grinding the valves. Big error. Also big huge error beating ball bearings in with a big steel hammer. Set the valves by pulling them open to see if gapped. No, that takes a feeler guage.

    @PaulHigginbothamSr@PaulHigginbothamSr3 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49673 ай бұрын

  • No es la manera de poner los rodamientos, como los puso no va durar mucho tiempo.

    @PedroRamirez-yw2gm@PedroRamirez-yw2gm4 ай бұрын

  • Saludos de Venezuela Edo Trujillo 🇻🇪👏👍 excelente trabajo exitos cada día más hermano tremendo trabajo lo del complesor de aire excelente exitos

    @joseparra2648@joseparra26482 ай бұрын

    • Thank you very much. Please follow and support us!

      @restorationsskills4967@restorationsskills49672 ай бұрын

    • I

      @romeoyasis3875@romeoyasis38752 ай бұрын

  • The guy needs to go a little more easier on the coffee before he starts welding.😂

    @lonnielengkeek7@lonnielengkeek75 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49675 ай бұрын

  • Master Chief mechanic 🎉

    @donnyomandam6557@donnyomandam65575 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49675 ай бұрын

  • 👍👍👍👏👏👏

    @cu3355@cu33554 ай бұрын

  • Подшипник забивает молотком,зато палец в шатун забивает чуть ли не киянкой😂

    @user-ty5cn3rt8x@user-ty5cn3rt8x4 ай бұрын

    • мне показалось или в конце видео компрессор заклинило ?

      @kot5846@kot58463 ай бұрын

  • 👍

    @user-rg6ef4ys7e@user-rg6ef4ys7e3 ай бұрын

  • So I haven't watched the video yet but I know it's gonna run, Because it's not made of plastic😮

    @lonnielengkeek7@lonnielengkeek75 ай бұрын

  • That is NOT the way you torque connecting rod bolts.

    @fourbyfourer@fourbyfourer2 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • It looks great, other than that I’d say it’s a fail. New reeds, reed plates, cylinders, and proper sized belts would help. Never paint or reuse pop off valves, no need to Teflon flare threads as they are not the sealing surface. Also I am curious as to the condition of the inside of the tanks, too much deterioration and they can explode. Also don’t paint the lubricated areas of the engine like inside the valve area. I wish I could get my hands on one of those engines, they look like they are built like a tank and simple enough to last a lifetime.

    @cm5838@cm58384 ай бұрын

    • It would be great if you were also a worker in our team

      @restorationsskills4967@restorationsskills49674 ай бұрын

    • @@restorationsskills4967 I rebuilt just about anything from vintage appliances to atv’s, I’ve done a few air compressors but it difficult because the tanks are usually compromised and replacements are far too expensive to justify. We’re talking large industrial 200-300 gallon tanks not sure what that is in liters but it’s big. I wish you had shown more like what did you do to the cylinders? Just a hone, replace, bore? What was your method of cleaning up the reeds? My country however has rather strict rules on industrial equipment, if I sell a bad tank and it explodes I can get into serious trouble, not sure how your country’s laws are. The safety valve alone being painted would be a failed inspection.

      @cm5838@cm58384 ай бұрын

  • Молотком по обойме может у них и принято, но это не хорошо. Кольца когда одевает царапает поршень, похоже культура ремонта им неизвестное понятие😊

    @RinatShaidullin@RinatShaidullin2 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49672 ай бұрын

  • @ 23:08 That was a sad way to install the bearings.

    @fourbyfourer@fourbyfourer2 ай бұрын

  • 凄いけど、ベアリングをあんな感じで叩いて大丈夫なのかな？

    @user-xl8dz7jz2x@user-xl8dz7jz2x4 ай бұрын

    • Thank you very much. it still works very well

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • 👍🙂🚜🚚

    @user-sw8xl2zy8l@user-sw8xl2zy8l6 ай бұрын

  • Belíssimo trabalho 👏🏼👏🏼👏🏼👏🏼🇧🇷

    @josericardonovais8768@josericardonovais87686 ай бұрын

    • Thank you very much . Please always follow and support us!

      @restorationsskills4967@restorationsskills49676 ай бұрын

    • serviço porco

      @brunofdslopes@brunofdslopes4 ай бұрын

  • ❤

    @tarkoredmi1763@tarkoredmi176311 күн бұрын

  • Son espertos en lo que les gusta

    @user-ge8ck5oe6q@user-ge8ck5oe6q3 ай бұрын

    • Thank you very much.

      @restorationsskills4967@restorationsskills49673 ай бұрын

  • Я смотрю, они там совсем незнакомы с таким понятием, как сбор металлолома!!!!

    @user-mu9sg5hh8x@user-mu9sg5hh8x4 ай бұрын

  • Should have used new E- blow off valves for safety.

    @jameskleatsch4069@jameskleatsch40694 ай бұрын

    • Thank you for your feedback so we can improve future products. Wishing you good health

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • việt nam à

    @dienvan1652@dienvan16524 ай бұрын

    • Thank you

      @restorationsskills4967@restorationsskills49674 ай бұрын

  • They must have a different kind of rust over there. Because I would of broke every bolt.😮

    @lonnielengkeek7@lonnielengkeek75 ай бұрын

  • зайдёт для тех кто нихрена не понимает !у всех практически резьбовых соединений от стояния на улице во влажной среде ( а это явно не дубаи )появляется ржавчина ! и кстати давление в топливных магистралях не держится вечно !да много чего !просто тупо потеря своего времени !

    @STARYI_MARAZMATIK@STARYI_MARAZMATIK4 ай бұрын

  • The sledge has a name. Planned Obsolescence

    @captain8810@captain88106 ай бұрын
KZhead