Plans to my projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
My Sheet Metal Bender Video: • DIY Sheet Metal Bender...
Finally i build one! And the big surprise came when I got the tungsten dust out of the grinder :(
That was a lot after just a few needles of tungsten.
The angle can be adjusted to 30, 45 and 60 degrees.
At the moment I can only grind 2.4mm needles but could build a different die for a different needle diameter. And i can used on my corded or battery powered die grinder. makes it very handy :)
Etsy Shop:
www.etsy.com/de/shop/Madebyth...
I like your helping hands.
'😂'
They are so awesome !
Where do you find those?! They are awesome!
Genius! After watching this channel and Jody over at weldingtipsandtricks, I just ordered my first tig stick plasma unit. I have never welded in my 55 years on Earth. Ive been bitten by the bug hard!
Welcome to the addiction. :)
Awesome 💪 nice to hear
How do you NOT have a million people following you? Another insane build! Awesome!
The sight glass is a nice touch.
Thank you 😁
my tungsten grinder throws dust and bits right into my face. this is great
I think this is awesome. You can wear a mask but the dust goes everywhere. Then when you clean or blow stuff it stirs up that dust again, and no mask. Really a great design.
This man deserves a medal. Absolute clean job. Wow!
Thank you 😁
Looks like he has a shop full of it to me
He deserves more metals
Looks like a very professional product designed and made from CAD. All your videos show off your skills and intelligence 👍
Thank you for the nice words 😁
Very smart. I like that
This dude's skills are mind blowing 😳
Einfach super, von der Idee bis hin zur Umsetzung.
Dankeschön 😁
Simply elegant execution. Really love the practical use of the third hand and fist. I laugh every time the pop up. I try and I try, but I’ll never be as clever as you. 👍👍😎👍👍
Thank you 🙂 👍
I'm glad you have a helping hand.😆
It's hypnotising and fascinating to watch someone like you. A person who have somthing in mind, can plan every step to make, have the skill for every step to build and finally has one piece of art, that is outstanding. The only thing that is disturbing is in fact your quantity. The qualitiy is beyond but i need every friday such a vid for a good start in the weekend :-D
Thank for that nice words 😁 I would love to do more Videos but with a fulltime job it is really hard to find all the time.
Took me a moment for the hammer. And went to the top of the "need" list. NICE !
Awesome 💪
great project. Excellent aluminum craftsmanship. Seems to work great. Have a painted rock in my shop from a friend. Says "Build it yourself"
Very good build Dirk, achieves a consistent grind angle, provides a dedicated grinder wheel and collects the tungsten dust for safer disposal. Well done. Excellent video, very good workmanship.
Thank you 😁
You did a great job making that attachment. I was wonder how you would solve the problem off grinding in the same spot. But a simple washer was the answer. Simple but effective. Nice build!
Amazing.....to watch Tig.....the original 3d printer🙂
Thank you 😁 Oh yes it is 💪
the only thing I comment after watching a video on this channel ----- genius!
WOW! been a metalworker for 10 years, this is impressive !
The build, the art, the video recording^montage, ☆☆☆☆☆☆☆ 🎖. Its a pleasure to watch you create. In other diy i just skip to last part to see what is being built. Here i enjoy the trip. Thanks
Thank you 😃
The Metalist range of quality tools coming to your nearest hardware store . Great job as usual.
I thought tthat hammer head was epic, Until i saw that helping Hand. LOL. Nice build by the way
For me personally, a championship
Thank you 😁
Dude...you make this look so easy! I like watching your vids!
A perfect metalalist. The quality of work shows that 👍
Thank you 😁
Excellent. We featured this video in our homemade tools forum this week :)
A true craftsman! Nice job.
Отличная идея. Лайк. Не хватает Ручка с накаткой на винт регулировки угла заточки. И подсветку в камеру заточки. 😎👍🏻
Ну ладно бы кондуктор для заточки свёрел. Мало кто умеет свёрла точить правильно... Но кондуктор для заточки сварочного электрода.... замутил бы уже револьверный станок с ЧПУ. Вставил, программу написал и достал в конце готовое.
@@pachkachaia4633 ну , тогда уже: вставил моток проволоки и на выходе готовые , заточенные электроды в упаковке и с ценником😅😅
Fantastic what a great tool and it catches the dust 👍👨🏻🏭🇬🇧
Excellent! I do like that smooth finnish, good job dude
All your stuff is amazing. Great work
Thank you 😊
You are an artist. Thanks for sharing.
For an awesome welder you make a great machinist.👍
thank you 😁😅
I'd weld one up too, if only I had something to grind a tungsten. Seriously, super nice work dude.
Thank you 😁
This is the Best DIY Tungsten Grinder i‘ve ever Seen so far. Greetings from germany
Dankeschön 😁 Grüße zurück
This is excellent, like all your work. Very enjoyable to watch.
Thank you 🙂
Let me know when you start selling these, so I can save a ton of time and just buy the finished product! Excellent job, once again. Thank you for taking time to film and post this video.
Thank you 😁
@@TheMetalist you are welcome!
Gut gemacht, exzellente Arbeit, du hast nette Ideen und du reist mit uns auf dem Gebiet der Kunst. Ich warte auf ein neues Video, danke
Dankeschön 😊 Ja da wird noch einiges kommen 😁
only few can be an artists and a craftsman 👍👍👍👍👍👍👍
😁😁😁 Thank you 💪
In the end that looks so clean and so good it’s as if it’s casted , but no it’s even better and much stronger than a casted part. FLAWLESS. I love working with aluminum because it’s very shapable . With lots of elbow grease you can get nice parts like this if that’s the look you are going for ! Really well done dude !! Cheers from Canada eh
Das hast Du sehr schön gelöst! 😃🤙🏻
Dankeschön 😁👋
Gran trabajo. Es de las mejores herramientas para la punta del tungsteno.
This guy obviously has the skills that enable him to pay the bills
😁
Omg that was a sick build man!
Amazing mate.. just love this channel.. love the Human limb popping up here and there 😂🤣😂
I will probably never need one of these, but what a fascinating build. 👍 Would be an ideal project for a metal 3D printer.
Thank you 😁 Oh yes a metal 3d printer 😍
Interessante Technik ⚙ Habe ich selbst so noch nie gesehen 👏 Danke für die wertige arbeit 👍
Dankeschön 😁
Love the '' helping hand''.
☝😁
nice piece of equipment,makes it more safe!
Endlich staubfrei 👌🏻top!
This is excellent work. I'm always worried about breathing in tungsten dust. This is perfect.
thank you 😁
Love this build. The video was super entertaining!
thank you 😁 I like your channel 👍
Bloody genius! Nice done!
Thank you 🙂
Excellent idea and build quality, like it a lot 👍
Thank you 😁
You should add one more hole to make a blunt tip for thev60 deg . I personally use a diamond wheel for a bench grinder and a drill to turn the tungsten it gives me a near polished finish.
Super robota I naprawdę Super pomysł pozdrawiam twórcę tego filmiku 👍👍👍👍
Wow. Excellent craftsmanship
Thank you 😁
Creative and impressive build
BRAVO! It’s brilliant. Very cool!
Thank you 🙂
Amazing creation hats off
cordless drill and dedicated grinding wheel, that's all you need
You can get 150 grit diamond wheel for around 45dollars
You are boring. Of course it can be done the way you describe however it is way more fun the way The Metalist has gone.
Pff, i use an angle grinder with whatever wheel i'm using at the moment and turn the tungsten by hand. #prowelderskills :p
On some code work the tungsten angle is specified so it’s nice to have an easy and accurate way to replicate
@@gnarlock3927 Could you post the code you're referencing? I certainly haven't done it all but it would be something I'd like to be able to reference so I can research the intent. I started as a 56 coded (US Navy nuclear) welder in '93 and have worked in quite a few different roles, on probably a hundred different types of projects as a welder, and have never seen the tungsten angle specified in any weld procedure.
Fenomenalna robota!!!
Another awesome project!!!
Thank you 🙂
Well done as always 👌🏼
Thank you 😁
So good ! Exquisite execution !
Thank you 😁
Nice work really well executed. Maybe one point, one hole is missing on the split in order to avoid having Cracks.
You are awesome man, good work 🙌🏻
thank you 😁
Good skills, well done.
Love this and the table.. going to attempt both soon.. Will let you s all know.. fantastic work... would love to get chatting to the engineer...
Thank you 😁 soon i will do a lifestream
Geiles Handwerk, und natürlich immer im Einstaz, die selbstgemachten Werkzeuge....Ich glaube ich komme um eine Magnetborhrmaschine nicht drumherum...
Dankeschön 😁 Ja gibt mir aufjedenfall jedemenge Ideen das Werkzeug selbst zu bauen 😅
einfach genial mal wieder
Dankeschön 😁
great job !!
Very very good job 👍 👏
You are a genius 👌 Nice work 👍👍
Thank you 😁
Absolutely outstanding. Perfection.
Thank you 😁
Great job hats off to you sir! very inspiring
Thank you 😁
real artist
You: That's a genius .... I personally resemble you.
Dude your videos keep getting better and better. Excellent editing and craftsmanship as always. Truly a joy to watch. Keep it up!
You are a true sorcerer!
Amazing work as always, The only downfall with this style is when you dip and it doesn't fit thru the hole anymore :(
Thank you 🙂 Yes thats right🙄
What I usually do (and its way tooooo often), break off the fouled end and start fresh. Put the shit end of the electrode in the vice and snap it off.
The Metalist have you tried different grits? What grit did you use?
@@TheMetalist that tends to be the proper way too. Much quicker sharpening a fresh blank end rather than grinding away a blob
That was awesome! First video I’ve seen of yours. Loved the helper hands too. Only negative that jumped at me was that I reckon a thumb screw for the angle setter would make sense, I’m a big fan of not needing tools to adjust tools. You’ve gained a subbed though! 👍🏻
Thank you 😁 Yes you are 100% right i missed that
I like best: your 3rd hand. Very nice...!!!
Very nice job well done dude
Thank you 😃
綺麗に 作りますね！ 素晴らしいと思います！
Went to go make myself one of these and realized my electrode is dull. I’m in a loop
“There’s a hole is my bucket dear Liza dear Liza...”
Excellent. Thank you.
Cool 👍muß ich auch basteln. Was für Schleifscheibe wird benötigt? Kernbohrer sind die gut für VA?
Awesome. I need it!
Thank you 🙂
Very clever mate 👍
Thank you 😁
That's cool. Mad skills👍
Thank you 🙂
Hallo Dirk, super Video. Schleife meine Elekroden im Moment noch auf dem Schleifbock und was ich das dann so zusammenfege ist beachtlich. Wenn ich mal soweit bin, werde ich versuchen das Teil nachzubauen. Danke.
Ja die Gesundheit geht ja doch meistens vor. Optional könntest du den Staub vom schleifbock absaugen.
Wow amazing idea !
Thank you 🙂
nice job
Tip top arbeit, Hut ab.
Dankeschön 😁
I think I might have done the different angles on different sides and then marked them, rather than one adjustable slot with 3 positions, but in either case, great work!
VERY IMPRESSIVE!!
Muito bom! Ótima ideia
Great project friend. This principle would can be used to make a Drill Bit Grinder.
Thank you 😃 Also a nice option/idea
I like it.. Now if only those weld table plans of yours would come available... 👍😁
Thank you 😁 they are available!
@@TheMetalist Great!! Where may I find them?
@@PauliesProjects i put them in the Video descripion
Wenn Du noch eine Öffnung dran baust um die Nadel, mit dem Scott, zu polieren fande ich es nahezu perfekt! Hut ab!!
Er hat das scott als Staubsammler gebaut😉