KZhead
Тәжірибелік нұсқаулар және стиль

How to STRIP Copper WIRE | Top 3 DIY Stripping devices | INCREDIBILE

King of Copper
2023 ж. 6 Қаз.
620 861 Рет қаралды
Жүктеу

How to Strip any Copper Wires in just a Couple of Minutes | 4 New Lifehacks.
Machine for Stripping thin Stranded Wires | Do it and you'll get rich.
Extracting Copper from Wires to buy my Cat food😼
How to Clean copper Wires without Special Tools | 4 New Life Hacks.
How to Clean Copper Wires with a Wrench.
This is all you need to strip any wires. Top 4 Homemade Knives.
This video will make your Life Easier | Best Homemade Wire Stripper.
How to strip a lot of wires in a short time, The best knife
Best Knife for stripping wires | Make it in just 5 minutes.
Extracting copper from wires is much easier with this tool. 2 best ideas.
The best Tool for Stripping Copper stranded Wires, do it yourself.
_________________________________________
Universal Stripper for all types of wires | DIY
My 5 Best Inventions for Stripping Copper Wires.
Best Knife for stripping wires | Make it in just 5 minutes.
How to strip insulation from any copper wire in 5 minutes. The best method.
#copper #stripper #cable
Best Tool to Clean Copper Wires from Insulation.
In this video I will show you how to make devices for stripping copper wires and cables, this machine will help you easily remove insulation from any copper wire,
You can make this machine with your own hands, easily and simply from almost improvised means. This is the simplest cable stripper and you can easily clean large quantities of copper cables in a short time. This is the simplest machine for cleaning copper wires, even a child can make it.
__________________________________
How to make a copper wire stripper, how to make a machine, a cable stripping machine, a do-it-yourself machine, how to strip insulation from a cable, how to strip any copper wire, a cable stripper, how to easily split a cable, a stripping tool, manual cable stripping machine, copper, how to clean copper, how to burn copper wires, copper wires, copper cable,Copper, how to burn copper wires, copper wires, copper cable, how to strip insulation from a cable, how much you can Earn, non-ferrous scrap metal, handing over scrap metal, searching for Scrap metal, how much you can earn by handing over copper, how to strip a cable, how easy it is to cut a cable, copper, a lot copper, how much is a kilogram of copper, where to find copper, medi,

Пікірлер

  • Hello. I will be glad to see your comments here. You are best.❤

    @CopperKing@CopperKing6 ай бұрын

  • Lucky he didn't drill into his hand! 😮

    @user-rz8nu8ni5j@user-rz8nu8ni5j6 ай бұрын

    • No, no luck, it's called Experience.

      @CopperKing@CopperKing5 ай бұрын

    • Experience would call for a little more safety lol

      @spitfire260381@spitfire2603815 ай бұрын

    • I've done that.

      @billybbob18@billybbob185 ай бұрын

    • No, it's inexperience. You have not been working in a shop long enough to see the trauma of a man ruining his hands and then the lose his ability to work his trade by destroying his hands.​@CopperKing

      @jasonhathaway9746@jasonhathaway97464 ай бұрын

    • Gen z cries about everything it's pathetic

      @ChanceWilkinsTwin@ChanceWilkinsTwin17 күн бұрын

  • May i suggest that you use the money you get from copper salvage to buy a vise and some gloves.

    @scotgustafson3270@scotgustafson32703 ай бұрын

    • Made me wince but they look like young hands so he'll learn the hard way.

      @EelingStudios@EelingStudiosАй бұрын

  • Man you wanna talk about a “Hand Held Vise” 😱

    @CSltz@CSltz3 ай бұрын

  • So satisfying to watch. Saving up alot of cables myself from the sites i work on going to give it a year n see wat i end up with. And im a joiner and gonni make a wee device like this. Cheers for the ideas bro

    @user-lw7qi8dd9q@user-lw7qi8dd9q4 ай бұрын

  • Все видели как он хотел себе руку просверлить?

    @user-rv5ht7bl9h@user-rv5ht7bl9h4 ай бұрын

  • Not bad! Great thinking. The first tool you've created I had in mind to make it too but for coax cables..3 blades (fixed of course).

    @ajcobbs@ajcobbs3 ай бұрын

  • My friend, these cables that you show are for 110 volts, we have 220 volts here so they are more powerful, your outer coating is very soft, with us you can't cut them with such knives, you have to have a very strong machine, and sometimes they cut still not good, then don't forget if you find old cables that are dry and hard, you can only burn them

    @user-lk2cr4kb5l@user-lk2cr4kb5l6 күн бұрын

  • Thanks for sharing my friend Like 👍453

    @StampsCoinsValues@StampsCoinsValues6 ай бұрын

  • Great idea useful to all of us thanks

    @user-uu8xj6cf8w@user-uu8xj6cf8w5 ай бұрын

  • second one only good for single strand of copper wire?

    @joefalcon870@joefalcon8706 ай бұрын

  • Thanks for the tips 🤜🏼🤛🏼

    @almacli8360@almacli83603 ай бұрын

  • Excellent Idea.

    @user-gd7vd4mh5x@user-gd7vd4mh5x2 ай бұрын

  • Lol great video my friend. Finally someone willing to step outside the bounds of safety to show a great tool being made !! Some people may never take the chance of getting out of the house to collect the knowledge of using this wonderful tool !!

    @scrappingonthefly77@scrappingonthefly775 ай бұрын

  • Awesome wire strippers love them thank you

    @carlynnserrano2664@carlynnserrano26646 ай бұрын

    • Thank You may friend

      @CopperKing@CopperKing6 ай бұрын

  • Great tool when you in the the field and no vise thanks for sharing

    @bodybywill@bodybywillАй бұрын

  • Awesome! I'm making one!

    @conniedavis6274@conniedavis62743 ай бұрын

  • 0:45. What re you thinking ? You going hurt your hands lol. Good job

    @CooLDEaFY4204Me@CooLDEaFY4204MeКүн бұрын

  • Fios rígido é fácil, quero ver cabo flexível

    @carlosalbertolopes7745@carlosalbertolopes77453 ай бұрын

  • Super ❤

    @wszechmocnieuzdolniony@wszechmocnieuzdolniony6 ай бұрын

  • You really want your audience to visit ER :)

    @cemmas@cemmas6 ай бұрын

    • I don’t know what kind of EP this is, but I suspect it’s not very good. I don’t encourage anyone to repeat after me, I’m just showing the principles of operation of different tools, but everyone does the job as best they can, I don’t have enough tools to ensure the safety of my work

      @CopperKing@CopperKing5 ай бұрын

  • Love this!

    @MikeySmithJones@MikeySmithJonesАй бұрын

    • Thank You

      @CopperKing@CopperKingАй бұрын

  • اللہ تعالیٰ لمبی عمر دی اور اللہ تعالیٰ شفاہ عطا فرمائے آمین ثم آمین

    @MskhanLala-yx6gw@MskhanLala-yx6gw4 ай бұрын

  • Where do you get all the supplies to make everything in the video

    @abbyerice980@abbyerice98023 күн бұрын

  • Tuyệt vời

    @hungngovan7981@hungngovan79815 ай бұрын

  • Você é um perigoso a trabalhar dessa maneira com maquinas😮😮

    @josecorreia1715@josecorreia17153 ай бұрын

  • Why do you hate your hands?

    @357pegas@357pegasАй бұрын

    • 😂

      @janoschbudde4815@janoschbudde48155 күн бұрын

  • I went to the hospital and had to get sticker, great idea!!

    @7628739@76287392 ай бұрын

  • Prenda a madeira em uma morsa, execute o furo com segurança! Como se faz um furo segurando a madeira com a mão embaixo de apoio meu deus 😂😅

    @user-pk6jy1pp7j@user-pk6jy1pp7j6 ай бұрын

    • Ok meu amigo, ouvi você, obrigado pelo conselho, mas estou gravando um vídeo em casa e não tenho as ferramentas certas. Obrigado pela compreensão

      @CopperKing@CopperKing5 ай бұрын

    • ​@@CopperKingYiu don't need a vise, just put the workpiece down on a surface so your hand will not get drilled. A couple of C-clamps might have helped hold it in place. You are lucky you are not disabled for life.

      @OldGrayCzechWolf@OldGrayCzechWolfАй бұрын

  • Haw to order

    @gsr1776@gsr17762 ай бұрын

  • Tanta ingeniería para que al final pegue la cuchilla con silicona 😂

    @TavitoPeru@TavitoPeru2 ай бұрын

  • I'm not good in thekichen but I can process and cook up a impressive poundage pile on the mini grill then soap water sand swirly after its cooled and bam top dollar low efort short time gotta do it quickly latenight b4 the dew drops likevit never happened

    @user-qe4ni8wg7t@user-qe4ni8wg7t27 күн бұрын

  • DIY : How to make a hole in your hand. 0:42 and 1:05

    @papunblg1988@papunblg19882 ай бұрын

  • That is the exact way I'd make it !! r u from Kentucky ?! Lol i have cut myself both safe & like this so

    @jontwilliamz3850@jontwilliamz3850Ай бұрын

  • Такая работа дрелью опасна.

    @user-qg2lb7si2v@user-qg2lb7si2v4 ай бұрын

  • ❤

    @user-ik5kt8fz2u@user-ik5kt8fz2uАй бұрын

  • О технике безопасности слышали?

    @MINELAB600@MINELAB6006 ай бұрын

    • Что это такое 🤔

      @CopperKing@CopperKing6 ай бұрын

    • @@CopperKing мне тоже интересно что это такое

      @MINELAB600@MINELAB6006 ай бұрын

    • @@MINELAB600 первый раз слышу

      @CopperKing@CopperKing6 ай бұрын

    • @@CopperKing тоже не приходилось с этим сталкиваться

      @MINELAB600@MINELAB6006 ай бұрын

  • Solo el último puede funcionar previa reforma. Hay gente para todo .

    @claudiocerutti7517@claudiocerutti751728 күн бұрын

  • ❤❤❤

    @ahsajahan6072@ahsajahan60724 ай бұрын

  • Safety first 😮

    @davisonfaison9147@davisonfaison91475 ай бұрын

  • All these are fine but you can just take a bench grinder and pull the wire a across it quick easy and does any size, wire

    @spitfire260381@spitfire2603815 ай бұрын

  • prices koto,amar lagba

    @HMMonirulHuda@HMMonirulHuda5 ай бұрын

  • music is fire

    @tukeaevy@tukeaevy8 күн бұрын

  • Drilling a whole like that is violent I watched a guy do this n bit slipped n went right into his hand lost motion in 3 fingers , do not drill anything in ur hand this way, it's to easy to clamp it

    @tre9563@tre9563Ай бұрын

  • Очень классное видео , спасибо ,с меня лайк и подписка

    @FlowJudy@FlowJudy5 ай бұрын

    • Спасибо за просмотр и подписку

      @CopperKing@CopperKing5 ай бұрын

  • Первый способ норм но зачем?! Берёшь концелярский нож и нодфиль. Нож должен быть самым дешманским с широким пластиковым наконечником. Пропиливаешь канавку снизу под 45 градусов выдвигаешь лезвие чуть чуть ложишь на кабель и ведёшь, нож не съезжает и все. Затупился просто обломал лезвие и всё. Быстро и практично. А с этой приблудой что делать если затупится ? ( Сори случайно удалил сообщение и не прочитал ответ ()

    @asmkatankovich2341@asmkatankovich23415 ай бұрын

    • Спасибо за совет, я попробую обязательно, то что я делаю это только идея дальше можно улучшить как захочется, можно придумать как менять лезвия если затупится. Спасибо

      @CopperKing@CopperKing5 ай бұрын

  • Thanks for the ideas but in comments you make common mistake of thinking that not being injured previously makes you less likely to be injured in future. Only takes one mistaken slice to cause nerve damage that changes your life. Plus your workmanship would improve, a 6mm drill bit shouldn't make an 8mm hole. Now to carry on hunting ideas which will scale from flex to 10mm twin and earth and 3 phase stuff.

    @chrishughes3405@chrishughes3405Ай бұрын

  • For safety's sake use a vice not your hand to drill holes.

    @countryside8122@countryside81224 ай бұрын

  • Just watching to see when he drills his had 😂

    @jasongallagher6046@jasongallagher60464 ай бұрын

  • This has got to be one of the most unsafe person that I have ever seen.

    @jimbishop4260@jimbishop42605 ай бұрын

    • Yes my friend you are right I am 🙋‍♂️ Greetings from Moldova, be happy and don’t worry about me.

      @CopperKing@CopperKing5 ай бұрын

  • 👍👍👍👍👍👍👍

    @user-tm9fz8dv9m@user-tm9fz8dv9m4 ай бұрын

  • I just use a Stanley knives to stripp my wire hands and legs are cut off me with the blade slipping when am stripping wire in the car on my tea and lunch breaks 😂

    @michaellavery7374@michaellavery73745 ай бұрын

  • Dónde está la seguridad esa persona 😢

    @gustavosolorzano1120@gustavosolorzano11206 ай бұрын

  • Sorry, I just can't watch you holding the piece in your hand while drilling.

    @eaglebill3738@eaglebill3738Ай бұрын

    • My grandson with autism loves to watch videos like this but wouldn’t under the danger of drilling into wood whilst holding.

      @rhondahennessy76@rhondahennessy766 сағат бұрын

  • Manos suicifas

    @joseluisbravo4884@joseluisbravo48846 ай бұрын

  • Keith Urban fighter

    @Jerry-ho5xp@Jerry-ho5xp6 ай бұрын

  • Con la música......prrrrrtttt

    @mojarra1949@mojarra19494 ай бұрын

  • Nothing worse than a Copper Cut on the hands. Does this work for all gauge wires? Meaning the Hot , ground etc inside? Thanx

    @familydogg1234@familydogg12346 ай бұрын

    • 🤔

      @CopperKing@CopperKing5 ай бұрын

  • Как он себе руки не проткнул?!

    @MultiCoolage@MultiCoolageАй бұрын

  • Ek screw bimar dete to chal jata Jo karne Khoj rahe ho

    @shahnawazkhan1382@shahnawazkhan13825 ай бұрын

  • 😅👍

    @joamarharanha4644@joamarharanha46446 ай бұрын

  • Ok2ok

    @shajiks8749@shajiks87495 ай бұрын

  • Lol funny everyone is dead set on stripping cabels i just toss em all in a fire melt the plastic off in minutes from dozens if cables then toss wire in a barrel with nuts and washers to shine it back up when done 😊 no stripping no fuss no mess

    @spitfire260381@spitfire2603814 ай бұрын

    • Burnt wire is not sellable.

      @user-uh2tw8ym9n@user-uh2tw8ym9nАй бұрын

    • Shure it is you just need to shine it back up i put it in a metal drum with nuts and bolts and spin it with a 3/4 horse motor with belt and pully attached to piece of rebar that is centered threw lid and botton like a big rock polisher lol takes about 20 30min spray a little WD40 or even used motor oil in with it then blow it off with air compressor i can do two 5 gallon pails of one foot lenth pieces per run long as its Shiny and looks clean they take it they melt it down anyway lol

      @spitfire260381@spitfire260381Ай бұрын

  • 😂❤❤❤❤

    @ahsajahan6072@ahsajahan60724 ай бұрын

  • Dale gracias a DIOS que no te taladraste la mano

    @beta6274@beta62743 ай бұрын

  • No maneja las herramientas con seguridad. Pone en peligro su integridad personal.

    @JuanCarlos-ew4gz@JuanCarlos-ew4gz2 ай бұрын

  • I think you need t buy a vice. You know its going to happen

    @flatbit3090@flatbit30902 ай бұрын

  • А вот в твердой оплетке чем чистить

    @user-yg9ov5jj5j@user-yg9ov5jj5j6 ай бұрын

    • Ножом

      @CopperKing@CopperKing5 ай бұрын

  • Segurança = 0 ( zero )

    @joaquimmarcelinodasilva7963@joaquimmarcelinodasilva79635 ай бұрын

  • عذرا لصاحب الفيديو ..استخدام شفرة الكتر غير آمن فعلا والطريقة تأخذ وقتا طويلا ..قم بحرق الأسلاك ثم جمعها واضربها بخشبة مناسبة يعود لها اللون الأصفر مرة ثانية والأمر ينتهى فى دقائق مهما كانت الكمية

    @user-vq5cu2px4o@user-vq5cu2px4oКүн бұрын

  • Хочется попросить призидента страны чтобы он поставил перспективного молодого Санжара Бокаева Акимом кого нибудь города или области. Я думаю он дал бы мастер класс - каким надо быть Акимом в 21 веке. А в общем президент удовлетворил бы просьбу какой-то немалой части общества.

    @user-xg2nj2lh6k@user-xg2nj2lh6k28 күн бұрын

  • Оти батисвате кабело бе ора

    @user-ue7yv6zb4o@user-ue7yv6zb4o6 ай бұрын

  • He could have used a smaller hinge. 😅

    @edwinespinosa5600@edwinespinosa56004 ай бұрын

    • Or bigger wood blocks

      @scotgustafson3270@scotgustafson32703 ай бұрын

  • Fazer furo com a mão na reta ainda mais com uma broca em alta velocidade e ser muito inocente ou muito burro kkkkkk😅

    @user-pk6jy1pp7j@user-pk6jy1pp7j6 ай бұрын

    • Isso se chama experiência

      @CopperKing@CopperKing5 ай бұрын

    • Not it's not its called stupidity

      @abildgaardfam@abildgaardfam5 ай бұрын

  • safety first

    @shadowgebe7226@shadowgebe72263 ай бұрын

  • READ THE COMMENTS PEOPLE. BEFORE USING OR BUILDING THESE CRAPPY RIGS... READ THE COMMENTS, PEOPLE.

    @tommielee8@tommielee85 ай бұрын

  • Ñ

    @adolfovalero3868@adolfovalero38684 ай бұрын

  • the jungle music sounds horrific

    @klu753@klu7534 ай бұрын

    • Yawn 🥱 ok gramps

      @truefacts404@truefacts4042 ай бұрын

  • Brak możliwości regulacji ostrza 👎

    @pawelmacko3424@pawelmacko34242 ай бұрын

  • Please use a vice. I cringed watching every step.

    @epicsasquatch452@epicsasquatch452Ай бұрын

  • Also so Bohrt ihr bitte nicht! Immer eine feste Unterlage und nicht in die Hand.

    @FausteUndSo-zd4jb@FausteUndSo-zd4jbАй бұрын

    • Sonst sehr Nice..macht die sache entspannter :-)

      @FausteUndSo-zd4jb@FausteUndSo-zd4jbАй бұрын

  • Even this is some good project, I TOTALLY DO NOT WISH TO GIVE ANY POSITIVE FEEDBACK. 100% SAFETY IS COMPROMISED 😮😮😮😮. SHOULD NOT PUBLISH THID KIND OF SAFETY COMPROMISING VIDEOS IN PUBLIC MEDEA. People might get permanent disability due to this unsafe conduct. 😢😢😢😢😢

    @kumaraskh1215@kumaraskh12152 ай бұрын

  • No way should this insane disregard for basic tool safety be promoted in any public forum. Extreme negligence like this causes uncounted serious hand injuries every day.

    @Mr_Curious@Mr_Curious5 ай бұрын

    • 100%

      @user-qx6ew2ku8e@user-qx6ew2ku8e5 ай бұрын

    • you are weird

      @michelleduc3137@michelleduc31375 ай бұрын

    • The easiest way to strip a wire is a blade in a vise, but this guy obviously doesn't have a vice.

      @johndiss@johndiss5 ай бұрын

    • Well friend, this is just your opinion, and I am in no way offended by you. I just want to emphasize that I work with these tools every day, and I specifically shoot the video with my bare hands, without gloves, so that you can count my severed fingers and severed veins. Good luck to you.

      @CopperKing@CopperKing5 ай бұрын

    • @@CopperKing Having had the painful experience of drilling through a block of wood and into the palm of my hand many years ago, I learned my lesson then. Never use your hand as a backstop for anything sharp. That's all I'm saying.

      @Mr_Curious@Mr_Curious5 ай бұрын

  • 17 minutes wasted

    @LifesGoodAhmedAbdo@LifesGoodAhmedAbdo5 ай бұрын

  • time>money just buy the real thing

    @Michael-il5wd@Michael-il5wd16 күн бұрын

  • You're an accident waiting to happen!

    @goinbzurk@goinbzurk11 сағат бұрын

  • Ghetto design. It'll mangle your hands if you use it.

    @WilhelmFreidrich@WilhelmFreidrich4 ай бұрын

  • Bundefacut

    @aurelpopa1348@aurelpopa13486 ай бұрын

    • Mulțumesc mult prietene

      @CopperKing@CopperKing5 ай бұрын

  • Your a bench vice

    @Wesley-bc6zz@Wesley-bc6zz23 күн бұрын

  • This guy should NOT be doing a video where he is completely disregarding any type of safety protocol. You NEVER demonstrate to anyone to drill or cut or any of this without proper safety and certainly never held in your hand to do so.

    @tunnelspringsbullies@tunnelspringsbulliesАй бұрын

  • Reported for harmful or dangerous acts

    @highnoter1@highnoter1Ай бұрын
KZhead