Fast and the furious drift car mods- RC Cincy
2019 ж. 13 Жел.
187 925 Рет қаралды
A video showing you guys how to make your vehicle Rear wheel drive. By removing the front and back bumper gets rid of a little bit away and makes it look a lot better. The last wave removal will be the cover for the receiver and battery. Lowering the body mounts one whole lower will make it closer to the ground and look better. Please remember that this product is not waterproof I would not drive it through puddles or anything specially by removing the cover for the battery and receiver.
Bro I love how this is such a straight to point accurate review, deserves a like
thank you.
You can get the body to be lowered to the 4th hole by only putting 2 pins to hold the car . Like one on the rear right and one on the front left it still holds and I haven’t seen or heard any damage/rubbing on my rc car.
to anyone watching that was as confused as me trying to rwd swap it: theres another screw under the cover for the board right next to the first one. undo that and then itll slide out
Could u make a vid? I can't find the screw ur talikn about....
I know under the big black thing there’s a screw across the one he unscrewed your have to take the whole cover off and unscrew it and you can take it off!
palletjak jr There are four screws for the top cover by removing those four screws you’ll see two screws holding on the front end removing those two screws will allow you to pull the Front end off
Thx i was struggleing and was probably going to break it
@@rccincy I just broke it
Thank you for this vid! Me and my brother got one each trying to mess with rc drifting without spending crazy money and the rear wheel drive mod was perfect!
np 👍
What does the rear wheel drive mod really do? I’m a bit confused because I really don’t know the difference
@@xxvergeecoxx7801 So if we had proper traction which I plan on upgrading or modding the wheels the wheel wheel drive makes it easier to drift and more realistic and scale. It's fine drifting we're all wheel drive that's why the designer that way because the tires don't have that much traction we are working on a man and seeing what I can come up with but either way which ever way you prefer is fine
Amazing video, I had no clue you could modify them until this, immediately doing this to my RX-7
I have the rx-7 and I did the red swap. I really suggest this over awd but don’t do the traction thing with electrical tape until you can get it to have like a better battery. What happens is it just grips and you can’t slide it at all. One benefit of just keeping it stock but rwd is that you can use the “nitro button” as kinda a good way to initiate. Just thought I would say something.
Yeah still haven't figured out a good way to upgrade the tires. If they would've just gave us a better set a tires it would be a great rear wheel drive car all about the traction at this point until I figure out a mod it would be better to stay with all-wheel-drive
The nitro is kinda like a clutch kick
This convinced me even more to get one
Thx man!! This helped a lot. I was so stressed bc I didn’t know how to convert awd to rwd but when I saw ur video, my whole perspective changed!! Thanks again bro. Keep up these helpful tutorials!
Np.👍
That is a cool little rc car like the rechargable
What do you think about mine? kzhead.info/sun/nLGFZaunZ2p8oq8/bejne.html
Bought the Hyper Charger Nissan GTR. Wasnt too sure if i wanted to spend the cash for the fancy drift model. But from what i've seen, appears to be worth it. Will be getting one of these now! Also I subscribed.
thanks
I have a skyline r34 drift rc. I did not know you could mod. Awesome video.
Thanks 👍
“Awww you guys are cuddle buddy’s”
Great review you went through everything
thanks. 👍
I have the skyline, supra and rx7. I am going to make all of em rwd!!! Tysm for this video!!!!
your welcome. ✌️
It’s a pretty nice car, took off the wing and lower the body, then I remove the rear bumper and it looks alot better, thanks
Great video thx for the help, using this video helped me lower my R/C truck so now it’s a drift truck. You just earned your self a free sub👍
Thanks 👍
No problem my guy
This is dope I have the orange rx7 and i been trying to find some mods on KZhead of what wheels and little cool things I could do
keshon woods thanks
keshon woods try a stronger battery that fits so it will go faster
You’d have to take out the old one and make some room under the hood but BOU does it zoom
I used to have it but my steering motor burend so i returend it for this one but imma get it in the future
Nice i have both r34 and rxy i put in leds in R34
did anybody hear “you guys are cuddle fighting”?????😂😂
I know all my fellow dads are watching this excited and can’t wait to show your kids this... cause I know I am lol
Wilbert Meaway 😂
I’ve got the rx7 and I’m going to do these mods your the first good one I have found
thanks. ✌️
@@rccincy the rear wheel drive mod does not work I tried but that is the only one that I undid it just won’t accelerate or anything
@@rccincy but all the other mods work
Heck yeah! Thanks 🙏🏽
No problem 👍
Wow wee that's quite awesome brother man I bought one of those fur a lady friend same kind of rc drift car. Man I tell ya she loved it what a great gift. 🎁 I see your really handy with the tech's of the rc drift car specs.
Are you able to take the wheels off to change them
Ik im late but ur a legend for doing this AND having your nephew in it was nice. Subbed And liked.
Thanks that means a lot
@@rccincy anytime, keep up the great work
👍
You can also put small spacers from like your bike the brakes have it and put it on the wheels so the stick out a lil more and make sure u lights up the wheel
true
Just got my first rc cars for Christmas. They are hobby grade. My first real rc car was the drifter and I rode that baby through snow and all terrains. I made new rubber tires for it. Also can you do a review of the holyton 1:12 car from amazon? It’d be a good video.
Hey do the battery’s last long for playtime?
I only needed the nots out but to reward u I watched the vid subbed and liked
ty
Upgrade battery to lipo 2s , install brushless 370 motor with esc and remote set up and get bearings anywhere you can fit them ..replace tie rods and linkages with hobby grade hardware and if you want rear wheel drive only then if you install the driveshaft then do not forget the front drive gears and half shafts or the front tires will hinder the cars ability due to drag from the wheels still turning the front end drive components !
That's a lot of work you need to post a video Of everything working and I'll share it.
Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time witch was 50 miles away and my family traveled every two weeks on Saturdays . I earned my allowance and was given 15 minutes to go in the hobby shop and buy my part ...so I would plan it out carefully ....what made it so hard was there was no internet I only had knowledge of hobby grade rc cars because I watched my uncle run his tamiya mud blaster a few times and took mental notes of how it was built so hit and miss factor was a bitch but within a summer I was able to mod the tyco bandits and hammer along with nikko rc cars to be cable of amazing speed ,run times prolonged , handling and way stronger ....mechanical speed controllers and recievers over a circuit boards, 370 motors , steel ball bearings over white plastic bus bushings inserts , servos over whatever that magnetic sorry steering box ...ball joints and adjustable control rods over wire bent and stuck in a plastic hole and of course oil dampend shocks , back then hobby grade rc cars usually had 4 double AA batteries to power the servos and a 7.2volt battery pack for the motor... Because tyco did not run full power to the motor it was cut down I think by almost half and 9.6 v battery's were the power and god forbid getting the circuit board wet one drop of water and smoke show with malfunction nervouse twitch type thing when you turn it on ....not repair friendly unless you were the aashole that came up with the design .... So ide fix all that nonsense because I could not afford a nice new mud blaster and I love rc anything . It's the same now to .my current rc is an exceed 1/10 brushed rally short course monster truck ....was brushed that is ....it's 3s brushless motor and esc and some other mods ...it cost 149.00 rtr. And ran at 23 mph......now it's at 210 dollars and it's all pavement lowered and grabs 53 mph if it can keep it's footing ......it will burn the tires sideways at 35 mph and go into drift mode .... I'm learning how to handle it. .. so buy a cheap rc and mod the fuck out of it .....amazon cheap. ..lol.
Back in the days when people had to use pens and paper or landlines in the family kitchen to communicate I got tired of tyco rc cars being just one step behind hobby grade in the electrtonics and motor area ...so ide make trips to the hobby shop one upgrade at a time
Dope video I'm from cincy also,just got a new sub 513💯
Thanks I appreciate that. Got a love the 513
Mine has a second screw holding the front and rear sections together. To get at the drive shaft, I had to remove the middle cover (4 screws) over battery and PCB to reveal the second screw.
Is the battery or playtime a long time? I heard the play time is like 10 minutes?
@@Elyas700 it’s like 1 hour and a half for mine
@@cringeski4177 how the hell? Mines like 15 mins
Thanks soo much for commenting this. I had the same problem and it really helped me!!!
np. 👍
1st like bro , cool video
RC Drones And More thanks
When you convert it to rwd there’s a gear in the front that you have to screw out otherwise the front wheels won’t move at all
Where is the screw located
Where's the screw at ?
What screw???
@@rebeccathompson7230 towards the front of the car, unscrew every screw that holds the plastic cover that’s over the awd driveshaft, take the driveshaft out and put the cover back on, that should work😁
@@rebeccathompson7230 if it doesn’t let me know and I’ll take a look at mine
Thanks so much this helped a lot
np your welcome And thanks for stopping by
Tengo una pregunta para vos, compre el mismo auto ayer, noto que al acelerar después de unos segundos baja la velocidad automáticamente, vi en tu video que te sucede lo mismo. Sabes si se puede solucionar ese inconveniente?
You got a new sub and do you know any wheels that are good for this car I have the rx7 one
Unfortunately I went through several well mods and what they provide is the best for all wheel drive currently
If you’re just looking for speed can I leave the all wheel drive or do you think I should have rear wheel drive?
Honestly it's just a tires typically drift cars are only real wheel drive. This car just honestly sucks and that's it get you a redcat epx Or a different hobby grade car and be done with it.
Is the steering just full to the right or left or is it like the hobby grade rc cars with full control of the steering
it's all or nothing it it kind of sucks. A hobby grade drift car is about 150 bucks from Amazon I just featured it on the channel and will be doing tons of videos and mods on it
Would u be able to do a video on only the rwd converting please if u could get it back and do it pls
Learned somethin new today
I love when that happens
Very Cool 👍
ty.
nice you got a new sub
Thanks for the sub!
Hey mate just got a few questions, what mm wheels /rims should i get for this and also is there aby other bodys that fit this if so plz lmk
It's 1/12 scale body so I'm not sure what options you have when it comes to that but I'm working on a wheel mod I haven't found a set of wheels for it yet
@@rccincy have u found any wheels?
Love this vid I want to do some of these on my Mazda rx7 from jada toys it’s hans
Buddy think of a way to put regular tires on it, so it doesnt slide so much does each wheel have individual screws to change out tires completely
I’ll do another mom video soon. Thanks for stopping by
That was helpful thx
You're welcome!
hi, I purchased this car to modify it, I should change the receiver, servo, radio, battery and perhaps engine to make it become almost professional. do you think you can succeed? Thank you! 
Yo make a video of this?
Yes, of course, you can mod anything
Do you have any idea where you can get bigger tires and a body so you can switch the car around?
A 1/12 scale body is hard to find, And you might be able to find some hobby grade robbers that you can put on the rims that's about it if you're lucky
Quick question. What’s the difference with it being rwd? Does it make it faster?
The mortor just gives the back all the power
Nice
thanks
Is it possible to connect a different rc controller (preferably a portionable controller) to the fast and furious car you are showing in the video?
It's not only the controller but the board Has to be able to do proportional as well
@@rccincy ohhh ok thanks!
np. 👍
Très belle voiture de drift.
sorry I didn't understand what you were saying. but looks like The last word is drift and I do have a video for that on my channel. ✌️ kzhead.info/sun/atakfKyNfXptnXk/bejne.html
Awesome video 👍👍
ty
Which state do you live in I had to get mine for $50 at walmart over here on oahu
Ohio at 39.99 at target and Walmart
Also, what’s a good battery to put in here? I don’t know if a bigger battery will shorten motor life, but I can’t afford a hobby grade car. Or maybe, could you link a hobby grade car that’s decent that I could save up for?
It's a brush Motor regardless what battery are using it Only last so long because I just brushed not brushless. The good part is if you buy hobby grade battery and a hobby grade charger later when you upgrade your vehicle you can always use that battery long as you get a good connector that's common for cars. It's completely up to you if you're already on that car it wouldn't cost much to put the battery on it use it for it and then you can save up for 100 car and use the battery already have for it as well so completely up to you
@@rccincy awesome, thanks!
@@rccincy Also what’s a good voltage I should use? I don’t know much about hobby cars, but I’m interested
@@quarans08 i m using a 3s 2200 ma 30c Battery
GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glc_fabc_OghbGbK9JQMDB
Have you thought about using a heat gun and widening the fenders just a little instead of trimming ?
That’s a good idea. I ll have to try it . Thanks
Do you recommend any good drift RC cars?
It depends on your budget,,,,
@@rccincy what id i have a 70-100$ budget
I’ve been looking at some of the drift Rc’s now but I can’t figure out what I want (I want something like 60$ or under for a starter) and I don’t really know what kinda I want or what’s best, anyone got suggestions on what to look into?
I was looking to do a video on something around that price range maybe I'll look up a few products and get back with you
repent and have faith in Jesus alone He will save you
Hold up buddy wait buddy
Hey how do you camber it I've been trying to do it for a while and can't seem to find a vid ab it
you typically can do it on a hobby grade car not this one it's when you adjust the angle and tow it the way you need it
@@rccincy i was just about to say that
Hey i don’t know if this happens to u but when I tried to pull the rc apart to get the drive shaft it won’t come out it’s too hard so I don’t know what to do
555th subscriber!
thanks
@@rccincy no problem
Sooo Im confused here. Is the car 1:10 or 1:12? I was looking to change the shell since I recently just broke off a piece from the RX-7 lol
it's 1/12 scale 1/10 scale bodies are to big
I ordered Brian's car I got Hans rx7 so all I did was add 3.7volt battery pack to make it go faster
awesome
Thanks
I have the orange and black version of this and I wanted to ask could I replace this motor with an stronger and faster motor if so which motor do u recommend? Pls respond
Honestly I'd be hard to get the proper dimensions and then you got to figure out the three cell that it's running it's pretty powerful and you need the motor and I can handle it
You might melt plastic with a stronger motor which will cause the motor to shift and then the gears won't mesh right anymore, if at all. I put a 3s 50C 5000mah battery with a sidewinder 3 on stock motor and it worked for about 6 runs. If I wouldn't have ran it for an hour straight each run, it'd probably still be working
@@lucky7s94 Honestly I never change the motor or the ESC. All I did is make a connector and connect a 3S 2200 mA 30c battery and it works fine
Right, I was just letting the guy know if the plastic gets hot, it will warp
@@lucky7s94 Oh okay. 👍
I'm thinking about putting a brushless motor on it which would make it alot faster. Where would I find a small brushless motor like that?
Amazon.com banggood.com Local hobby shops and online hobby shops.
It'll be a little bit of work but it's definitely doable
Got it apart and thanks I'm going to stop up at hobby shop tomorrow. Def would be pretty badass! Connected 12t titan motor to it and it ran pretty fast especially when I hit turbo button. But it's way to big to fit in there.lol
what battery could you put in it that will be safe and more powerful?
3s 30c
I have the same one but its the orange and black r-x7 and im lookimg to put a new body on it so do you know what scale of the r-x7 is?
The car is 1/12 scale so there's basically nothing out there That I could find
@@rccincy ok tysm bro god bless.🙏
Hi, Help - I ordered the GT-R R34 model & received the BNR34 - do u know the differences, year made & which is better? Ty in advance or who I can call ty gift for nephew
So if it's the same size as the other one they're all the same exact vehicle underneath just different bodies long is the same size. It's just a shell so they perform really well for a toy
What size is this and loved the video can’t wait till my one comes
I would say 1/12 scale
So would you say that its better in rwd or awd?
Right now on awd and once i do a wheel mod probably preference
I have a question can you take the full wheels and tire I know you can take off the tire but what about the wheel can you?
Yeah it's just a Phillips screw
Thanks so much I have one and I wanted to change the wheel thanks I have a lot of ex cars thanks so much
@@Jakeyt-yf8qq np ✌️
Would it be possible to swap another 1/10 body onto the chassis?
Nope because it's not 1/10 scale. It's smaller like a 1/12
I am struggling to take the front of it off to take the front axle out, i took out the one screw but it’s not wanting to pull apart
There's more screws under the middle cover take that off and you will see the other screws holding front on.
I have the Supra one and it’s the same just different body, I tried taking off the front part to make it rear wheel and it would not come apart... any suggestions what to do?
go to my channel and i have a few videos on it and mods
Honestly I would leave it all wheel drive because the tires that I went through all that trouble to upgrade it's just good for track not drifting. The best thing to do is to remove the front and back bumper to make it look better. Lower it a little bit and then do the bigger battery mode. that's what I recommend look on my channel for the last video I did on this particular car and it will show you all the mods .
Is it ok if my car is on fire
No it's not you did something wrong
Don’t worry. It’s NOS 😂
There’s 2 screws in the front to remove the axle …. It’s hidden by the wires … it took me 30 mins to realize since you didn’t point that out
U can actually hook a 3s lipo battery to it and itll be fine. I've done that to mine and been using it for months with no problems. Can get 2 hrs of runtime
i ll have to try that . I ll let you guys know how it goes.
Hey can you help me with that? I’m new to rc cars and I don’t know how to change the battery
A lot funner lol.. more fun (j/k) nice video
😂 thanks.
hello bro, can i add lights in them, like is there a port in the reciver
no i did a video how to do lights for 6 bucks plus a hot glue gun. its on my channel.
After 9.6v battery witch will be the next hiRe battery Voltage..
You can upgarde youre battery storage i upgraded mine before mine can hold 1 battery now its holds 2 so make a vid of upgrading rc cars that inspires me thank you!
You're welcome thanks for stopping by and checking out the channel
@-Xb_A1A7ツ E-Flight 3s 2200 mA 30c
The battery i got is lipo 10s
can you do a tutorial to do a sterring control where if you pull a certain amount it only turns that much
You need a servo and fully proportional remote for that. Definitely hobby grade rc car.
im pretty late but the battery life is kind of garbage so I'm thinking of putting an 11.1v 35c 1100mAh battery in it, is it gonna go boom boom? I'm not that good with batteries
GOLDBAT 3S 11.1V 3000mAh 30C Lipo Battery with Dean-Style T Connector and XT60 Connector for RC Car Airplane Helicopter Boat Drone FPV and Quadcopter Remote Control Toys www.amazon.com/dp/B07LGZ3TVM/ref=cm_sw_r_cp_api_glt_fabc_BRZ9GWMVY2HKBMNJBQ8J?_encoding=UTF8&psc=1
do you want at least 2200 ma-3000ma and the one I put all my time and tested was only a 30 C
I’m having trouble getting the prices separated do you have any suggestions
remove all the screws on the top and front end.
Rc Cincy ok
Should I get this one or the tamiya tt-01 Subaru BRZ. Please answer quick I have to decide which one to get
Killer4Life210 I personally haven’t had one yet but I hear the steering servo Is twitchy And the shocks are not that good. Those things will be very easy to fix depends how much it is?
Rc Cincy it is $40 bucks
Rc Cincy can you make a video and how to do stuff like that
Killer4Life210 It’s either 30 or 40 it’s been a while since I bought one just shop around at different places.
Killer4Life210 I’ll end up getting a hobby grade car just like the one you’re looking at And I’ll do a video on changing servos and other mods like that
Ok how did you so easily take the front end off I can get it off I see it somewhat moving out but it just won’t fully come out
Watch the newest build series On my channel
What Battery do you think i can fit in their ?
3s 2000ma-4000ma 30c
How do you make the back wheels spin but no the front in the video
I just very carefully removed the four screws off the cover then I removed two more on the front slid it out careful not to pull the steering wires out and remove the driveshaft straight out. Make sure you have some better tires or you'll have traction issues
I saw this vid a while ago. My cars axle got crushed from being in storage, so I went to fix it. Tried to bend the axle back as best as I could, and since I had a new one on the way, I thought, “why not make it RWD?” Then I remembered where the driveshaft is thanks to this video, and it’s now RWD. Speed for me has dropped a bit, but that’s because of the surface I drove it on. Now that I’ve done this, does anyone know the size of these wheels or tires? I want to get rubber tires, and maybe mod them so they get on the car. Help, please!
if you buy cheap $10 hobby grade rubber wheels will actually fit on there but the problem is he won't be able to dress because I'll have too much crap it'll be more of a track car. Is it the plastic driveshaft or the metal one?
@@rccincy plastic
@@rccincy Ik I’m asking a lot of questions, but, what size tires should I get? Is 1/10 a size?
@@rccincy 4X RC Tires & Wheels Rims Sets Y Shaped Width:26mm 12mm Hex Drive Hub for 1/10 Scale On Road Touring Racing www.amazon.com/dp/B01MTSMNAZ/ref=cm_sw_r_cp_api_glc_fabc_UDgbGbSNP7AJ1 when I upgrade the battery, could I mod these on? Might be able to just screw them on
hey im having trouble making mine rwd I took out the screw and it wouldn’t come apart and now im at the point where ive put a knife and flat head into it to pry it apart and the side with the actual drive train won’t come apart any advice?
If anyone has the same problem take off the battery cover and it reveals a second screw you have to undo on the new models
4 screws for top cover and 2 for front end and 2 for back end to come a part
there s 2 per side
Hey is there a place where I can buy replacement parts for this car
no only if you get a used one
You guys are cuddle buddies😂😂😂
Referring to My dog yes
With the drive train thing for some reason the body can’t come apart. I don’t know why. I’m trying to make mine RWD. Is there a way you can help me out?
gregory vega I ll done a follow up on this video
Rc Cincy I figured it out. Thank you though. The problem now is that when I go to drive the RC car it’s turning left.
gregory vega how did u get it off mine isn’t coming apart either
gregory vega I need help opening it 😔
Is it possible to change the shell to a different one I was going to buy another shell but I wasn’t sure about it
Yes long as it’s a 1/10 scale body
Rc Cincy thank you so much I just ordered one and wanted to put a 240sx shell on it I wasn’t sure if I could but thank you!
Rc Cincy I subscribed
Does anyone know if you can add custom wheels to this? also i was planning on getting this for Christmas and i was going to do these mods and get extra wheels for it
I haven't found anything that fits right out of the package I might have to mod something to make it work
whats the highest voltage battery should i put in the car?
11.1v I have tested for over two years now with no issues
Lol his friend in the background
Where did you get the car at?
Exquizite Animations look at Walmart target or even amazon
i'd love to purchase one of the like.
Walmart.com or Amazon.com