KZhead
Ғылым және технология

DIY Generator | How to make 250W generator

American Tech
2022 ж. 7 Мау.
165 702 Рет қаралды
Жүктеу

Bearing bit.ly/3fPmy42
amzn.to/3TtQaVI
Magnet amzn.to/3L3g9QJ
------------------------------------------------------------------------------------------------------------------
Contact us
Email: singoeurnsok@gmail.com
FB Page : bit.ly/3JUfksa​
Join us
/ americantech
Sponsor us
www.paypal.com/paypalme/Singo...
-----------------------------------------------------------------------------------------------------------------
How to make 250W generator
Related Videos
1.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
2 .V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
3 .Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
4 .How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
5. How to make Easy motor at home 2017
• How to make Easy motor...
6. How to make 3V Battery from coopper wire
• How to make 3V Battery...
7. How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
8. How to make an Electricity Generator from old HDD motor
• How to make an Electri...
9. Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
10. Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
11. How to make V2 water pump at home , new model of water pump 2017
• Video
12. How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
13. homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
14. ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
15. High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
16. Super motor , homemade easy motor 2017 , new idea to create motor
• Video
17. Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
18. Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
19. homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
20. Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video
21. Free energy, diode as solar cell, new idea to make solar cell 2017
• Free energy, diode as ...
22. How to make spot welding machine at home 2017
• How to make spot weldi...
23. Free energy , Transistor solar cell, how to make solar cell from transistor 2017
• Free energy , Transist...
24. Super DC motor, how to make DC motor very easy
• Video
25. Free energy, solar X4 diode , homemade solar cell from diode 2017
• Video
#Generator
#Dynamo
#Alternator
#DIY
#energy generator

Пікірлер

  • This is a wonderful example of the concept, and very well demonstrated. But you've undervalued the strength of your Neomags. That magnetic field is shooting out of both faces of your mags, more coils = more juice. Lengthen your shaft,and add pulleys, connecting it to your turbine. ( I'd try a vertically mounted shaft, its simple, and catches wind from any direction. ) Good job!! Keep up the effort. This could used very well as an educational tool for all sorts of folks. Help spread the word, Our ingenuity can solve many,many of our problems, and you're well on your way! MORE POWER TO THE PEOPLE!

    @howiewood@howiewood7 ай бұрын

  • Algo digno de compartir. excelente trabajo. felicidades

    @dariotellezh.3530@dariotellezh.3530 Жыл бұрын

  • I like this generator. Can you provide a parts list like the color you used to connect the 2 stators? It would have been nice if you had shown how the magnets are positioned in the stator for thoughts that don't know how to do it. In my case, I do know and would like to let everyone else know. Each magnet is placed alternating the poles. The first hole is North and the next is South then North and so on. One thing to keep in mind is that the poles on the other stator need to be aligned so that the south pole on one disc is alined with the north pole on the other disc. I hope this helps thoughts that were not sure how the magnets are placed.

    @BuildingFromScratch@BuildingFromScratch Жыл бұрын

  • You are brilliant scientist 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

    @expertknowledge5512@expertknowledge5512 Жыл бұрын

  • Excellent project 👍

    @electronic7979@electronic7979 Жыл бұрын

  • coil and magnets should be vice versa (u would have double efficient ;) so, a singel magnet rotor in the middle but 2 of stable coil plates at the out ;)

    @19hakan72@19hakan728 ай бұрын

  • Parabéns pelo seu projeto 👏

    @garagem100criatividade5@garagem100criatividade5 Жыл бұрын

  • Can you please tell me where you bought the bushings. Thank you

    @user-xq9ie4eb6m@user-xq9ie4eb6m8 ай бұрын

  • Awesome… very beautiful 👌 Fully watched 👍

    @SC.243k@SC.243k Жыл бұрын

  • Awesome work💙

    @InventR_@InventR_ Жыл бұрын

  • Good concept and execution the add in me kept fast forwarding to the good parts

    @Delta19G@Delta19G Жыл бұрын

  • This design does not exploit the full flux potential of the magnets by not providing flat mild steel return flux back plates. If that was done, the air gap flux linking the serpentine coil would be much greater and would produce substantially more power output. This modification would not introduce cogging torque.

    @anandawijesinghe6298@anandawijesinghe6298 Жыл бұрын

    • That's why all motors use a metallic case?

      @Ungido75@Ungido75 Жыл бұрын

  • Good thinking, you could add a second ring with magnets on the otherside reversed poles. Increasing amplitude output.

    @QUADBOYification@QUADBOYification Жыл бұрын

  • A second coil ring would double the output. And: air coils need much more speed, but acrylic glas will not withstand the fly wheel forces. However trying to drive a motor rated 250W without a load doesn't prove anything. Try to put a shunt resistor of say 0.01Ω in series. Then you should measure a voltage drop of around 2.5V @ 250W by using Ohm's law. I am pretty sure your system will produce not more than 0.7V or 70W. But I like your design. It looks so easy and clear.

    @FlexibleBladeTurbine@FlexibleBladeTurbine Жыл бұрын

    • what is cool though if it even works at all which i see no extra wires it doesnt take much power to run.

      @chehystpewpur4754@chehystpewpur47544 ай бұрын

    • @@chehystpewpur4754 I'm trying to assemble such a generator and it looks like my hands are not the same as a result, there is no result

      @stels322@stels3223 ай бұрын

    • @@stels322 odd response. but i get it. could just be a simple design flaw or oversight keeping your from working

      @chehystpewpur4754@chehystpewpur47543 ай бұрын

    • Are your magnets alternated?

      @user-ug5sb6qg1u@user-ug5sb6qg1u5 күн бұрын

  • This gives me an idea for building something similar But utilizing differential gear set

    @Noneyobusiness851@Noneyobusiness851 Жыл бұрын

  • COOOOL GOOD WORK SERVICE FIX 🌟🌟🌟🌟🌟💙🤗

    @victorapalkow8681@victorapalkow8681 Жыл бұрын

  • Thank you Maaan.....loooove that naked machine...!!!!

    @dinosaur0073@dinosaur0073 Жыл бұрын

  • We enjoy your works from Africa. Please tell us the poles of the magnet: It is likely that the magnets on the same sheet alternates between north pole and south pole and the magnet on opposite sides have different poles (That's, north pole to south pole and vice versa),

    @ikehsamuelifeanyi4925@ikehsamuelifeanyi4925 Жыл бұрын

  • Good looking work . Did you try bumping it up by running coil magnets coil magnets coil . 3X the output with the same energy used in the rotation.

    @oneeight9238@oneeight92389 ай бұрын

  • Frumos lucrat .intreb ce turatie are si daca opune razistenta si ce aperaj are

    @marianpanait7926@marianpanait7926 Жыл бұрын

  • Nice project..👍👍

    @dearteddy@dearteddy5 ай бұрын

  • I just watch your videos because you don't say lie like other making 27000 watts 😅. Can you please make some dynamo operating from few watts motor and output 5000 or 10000 watts.

    @nataliapalweski2072@nataliapalweski20722 ай бұрын

  • Особенно интересно тщательное 2 мин. закручивание винтиков.

    @simsimakov1457@simsimakov1457 Жыл бұрын

  • According to you, out of all generators which one is the best?

    @Afzalkhan-nb9rk@Afzalkhan-nb9rk Жыл бұрын

  • Great idea.A+ for effort ,C- for implementation, sorry, but you are only taking advantage of a small amount of the available force of those expensive neo-mags. The advantage of the axial flux field is that you have wasted half the available energy in the system. You need too wind up at least two(2) more sets of coils for the outer faces of the mags.. Make sure the offset angles compliment the intersection of the mag fields, in order to minimize "mag-lock", and to smooth out rotational resistance. Just an idea.. LITTLE MORE COPPER; LOTS MORE JUICE,.?.

    @howiewood@howiewood7 ай бұрын

  • ¿ Que cabezal láser utilizas ?

    @germana.victoriapizo559@germana.victoriapizo559 Жыл бұрын

  • How many volts is being used to generate this 22.5v ?

    @zusclhz@zusclhz Жыл бұрын

  • From the dynamo you get 1.3A 22V, the fact that the 12V 250W motor works does not mean that the dynamo has a power of 250W. The presented Dynamo/generator has approximately 20W. Show current consumption test.

    @bogdank.z@bogdank.z4 ай бұрын

  • Muito top

    @devandoB@devandoB13 күн бұрын

  • Check input RPM and output RPM with voltage

    @SpaceSoftSystem@SpaceSoftSystemАй бұрын

  • Hi there do you have the files for light burn so I can print on my laser?

    @markkevin7245@markkevin7245 Жыл бұрын

  • excilent.

    @mamunulhasanmamun8751@mamunulhasanmamun8751 Жыл бұрын

  • Impressive!!

    @jacekhubert100@jacekhubert1004 ай бұрын

  • As some sayed...in short,you can do it better to ghet more energy. Personal thought-The next step for such a generator is to make one worck in vacume(no air=no friction).

    @user-nn5xb2ub2l@user-nn5xb2ub2l3 ай бұрын

  • You should wind the coil vertically outside the magnets. Which should also be wound vertically. That way you will get more volts. Pretty much 10 times. Because the coil needs to have almost zero 45degree points. In your coil there is a lot. Do it again. As I said. And see.

    @earthlingthings@earthlingthings Жыл бұрын

  • Please make a video on axial flux motor

    @sandeepkhelna3488@sandeepkhelna3488 Жыл бұрын

  • Nice

    @parandhanchakma7551@parandhanchakma7551 Жыл бұрын

  • voltage means nothing. amp is important with a little bit of volts

    @jmevdruten@jmevdruten Жыл бұрын

  • Se puede hacer motores y generadores con imanes temporales que no se hacen con tierras raras

    @joseangelalonsoregidor@joseangelalonsoregidor Жыл бұрын

  • Can you make low rpm small gennerator

    @thaidev3153@thaidev3153 Жыл бұрын

  • Alat pemotongan canggih apa itu Mr tolong jawab

    @ggchannel2574@ggchannel2574 Жыл бұрын

  • is there a way to build a three phase variant to the mono coil? other than stacking 3 in parallel or resorting to the usual style of alternator which CAN be made to generate 3 phase?

    @bennyellis3512@bennyellis3512 Жыл бұрын

    • I have made a 3 phase axial flux generator with 3 stators and 32 3x1cm N52 magnets. there is plenty of vodeos on youtube but essentially just connect coil 1,4 - 2,5 and 3, 6 together. Use a rectiier and split the one connection to each rectifier.

      @wullie1320@wullie1320 Жыл бұрын

    • @@wullie1320but he has one serpentine coil. I too would like to understand how to add a couple more phases to this design, but your answer doesn’t make sense in the context.

      @dnmnsmith@dnmnsmith2 ай бұрын

  • every 90 or so seconds was a commercial advertisement making it an aggravating experience. great work on the trinket though.

    @avatarklh@avatarklh Жыл бұрын

  • like my design in 2017 with acrylic case

    @pejuangkeadilan9070@pejuangkeadilan9070 Жыл бұрын

  • Did we really need to watch him tighten every bolt while also listening to techno?

    @user-ug5sb6qg1u@user-ug5sb6qg1u5 күн бұрын

  • How can one get access to the 3d files ?

    @sensei_dm@sensei_dm Жыл бұрын

  • To create a 250W generator using DIY methods, you can consider the following options: 1. Using a lawn mower engine and an alternator: This involves using a lawn mower engine and connecting it to an alternator to charge a battery, which can then power an inverter to generate AC power. 2. Building a series magnetic generator system: This method involves connecting two identical permanent magnet DC generators together to double the generated voltage. This can be done by connecting their shafts together using a shaft coupler or a back-to-back drill chuck system with a pulley in between. 3. Building a miniature gasoline generator: This involves using a small four-stroke gasoline engine, such as a 36cc engine, to power a DC generator. The generator can be used to charge batteries or power appliances using an inverter. Please note that these are general suggestions based on the information provided. It is important to research and follow detailed instructions and safety precautions when working with generators and electrical systems.

    @user-ft3vx3ds6t@user-ft3vx3ds6t3 ай бұрын

  • هل يمكن تعليمي كيف تصنع المثقاب 12V

    @must14afaamjed@must14afaamjed Жыл бұрын

  • adam gözümün önünde bütün vidaları tek tek sıktı

    @bilgeboz6038@bilgeboz60388 ай бұрын

  • Only thing wrong with this video is the music! Sorry to say

    @kywildcats6302@kywildcats6302 Жыл бұрын

  • new concept input as before but change the design will get 2 times more output

    @somsakkulchanapakorn95@somsakkulchanapakorn9510 ай бұрын

  • how RPM each motor ??

    @thetrue1636@thetrue1636 Жыл бұрын

  • Next make BLDC Motor with this same generator. Just add 2 more coils in 120 degrees phase and then connect it to an ESC

    @aadhithvarathan5432@aadhithvarathan5432 Жыл бұрын

  • кто знает подскажите пожалуйста что за модель мультиметра? спасибо

    @El_comentate@El_comentate Жыл бұрын

  • How am i supposed to get drill rpm at daily life

    @vladimirlenin843@vladimirlenin843 Жыл бұрын

  • Jajajaja ese voltaje lo lo consigo yo con un motor de batidora de 220v DC y llegó a los 32 voltios con pocas revoluciones, ¿pero como lo mantengo a 250 rpm sin árbol de inercia?

    @agustinmiguelperezperez6464@agustinmiguelperezperez6464 Жыл бұрын

  • hi you are the prorpety have a cuestion for you to better your develop magnet from spain

    @ELOTROLADO2.0@ELOTROLADO2.0 Жыл бұрын

  • Can you put a small motor powered by a solar cells to spin the generator

    @angelguerrero2890@angelguerrero2890 Жыл бұрын

    • Yes

      @Rahulchowdhury-mo9rf@Rahulchowdhury-mo9rf10 ай бұрын

    • Why would you wish to do this? Think about it!

      @BasementEngineer@BasementEngineer6 ай бұрын

  • Copper design really work? It look not work. But i'll try.

    @programmerpladag4902@programmerpladag4902 Жыл бұрын

  • Vai ter para venda

    @ramiroalvesdemattos5312@ramiroalvesdemattos5312 Жыл бұрын

  • Sería mejor con una placa de imanes y una placa de bobinas a cada lado, tipo sandwich, produciría el doble de electricidad...

    @victormanuelcazarezhernand1940@victormanuelcazarezhernand194010 ай бұрын

  • Якщ крутити катушку і магніти в різні сторони. Буде 5о вольт.

    @user-tr9kd3ql5l@user-tr9kd3ql5l7 ай бұрын

  • I’m going to attach this to a wooden escapement mechanism and build a clockwork computer. I don’t know how long it’ll take, but I’ll let you know.

    @FriedPotatoNugget@FriedPotatoNugget Жыл бұрын

  • 250w to make 250w …?

    @ferencszabo3504@ferencszabo3504 Жыл бұрын

  • В моей стране похоже законы физики другие и мой подобный генератор не работает как хотелось

    @stels322@stels3223 ай бұрын

  • toi muon dac lam giong cai nay

    @Duy-AUDIO@Duy-AUDIO Жыл бұрын

  • Cuál es la gracia? Es un dínamo de bicicleta...

    @yeyin777@yeyin777 Жыл бұрын

  • Congratulations!! excelant generator. Do you can send me details of coil?

    @edsonferraz1@edsonferraz1 Жыл бұрын

    • Here is the link to the video where he made the coil kzhead.info/sun/dbtqpLRrfIt8fa8/bejne.html I just wish we could get a copy of the coil holder so I could 3D print it or have it cut in the plexiglass.

      @BuildingFromScratch@BuildingFromScratch Жыл бұрын

  • You build the full shitty generators from morning to night.

    @haraldlauchkorper7109@haraldlauchkorper7109 Жыл бұрын

  • Looking same design

    @ramupandey4674@ramupandey4674 Жыл бұрын

    • Yes

      @expertknowledge5512@expertknowledge5512 Жыл бұрын

  • Third 👍

    @MuhamadRidwan-pq6wk@MuhamadRidwan-pq6wk Жыл бұрын

  • I see that you never reply any comment or even emails

    @sensei_dm@sensei_dm Жыл бұрын

  • Yah wala saman banakar doge to kitne mein doge bhai

    @satpalmanhare95@satpalmanhare9510 ай бұрын

  • Very not good. Only one half of the magnetic induction is used. The other half is wasted.

    @linoross7493@linoross74933 ай бұрын

  • Befendi bana bir tane yapıp gönderebilirmisin Kaç dolarsa paranı ödeyim lütfen. Merci

    @gocluomer9583@gocluomer9583 Жыл бұрын

  • Engineer is not same with art Mr, that waste time

    @Mahesa_Pamungkas@Mahesa_Pamungkas Жыл бұрын

  • seems weak

    @shienkalitvinov@shienkalitvinov Жыл бұрын

  • You think I am an idiot?

    @mannybelo8410@mannybelo8410 Жыл бұрын

  • Very noisy very inefficient 🤣🤣🤣

    @davey2k12@davey2k12 Жыл бұрын
KZhead