2020 BMW x5 G05 Front brake pads and rotor removal (2019 2020 2021 2022)
2023 ж. 12 Нау.
12 758 Рет қаралды
This should be the same for 2019 2020 2021 2022 BMW X5. Install is just reverse of removal.
This should be the same for 2019 2020 2021 2022 BMW X5. Install is just reverse of removal.
Great job. You make it look easy. I guarantee I will make it look hard when I attempt it.
I’m a diva and only work on a lift these days, so your experience will differ. Good luck brother!
Thank you so much for posting this video. I just needed to make sure there wasn’t some crazy-special tool needed. - I’ll be checking in with your channel for any of my other maintenance.
I just want to say THANK YOU. You are the best. I just finished changing the rotors and pads on my 2019 X5. Thank you for explaining the tools. I purchased everything from Amazon. I used a Milwaukee impact. Just one FYI. The bottom bolt on one of my calipers seized. I was able to take off the top bolt. I took the break lines off the hook. I used a rubber mallet to beat the caliper and rotate down enough to squeeze out the rotor. Just a major FYI to anyone trying this
I am about to do his on my 2019 X5 40i - is there anyway you can share the link to what you bought on amazon? I don't need rotors
Can you send the link for the brake pads you bought?
Hey friend - I’m tackling this over the coming weekend. I read something about engaging the parking break before turning on the car. Is that right? Did you do anything like that?
@@husseinlakiss3883 I purchased everything from NAPA.
Thanks brother. Gonna do a brake job on the wife’s car soon
Exactly same Discs and pads on my 2018 BMW 530d Touring Xdrive. Thank you 👍🏻 just changed them, no issues what so ever
Doing this maintenance this Friday thank you man 😊
What’s some recommendations for good quality brakes and rotors to purchase
Can u do rear break too
What are the torque specs for the E16 caliper bolts?
Hey friend - I’m tackling this over the coming weekend. I read something about engaging the parking break before turning on the car. Is that right? Did you do anything like that? Also, where can I find instructions on clearing the pad sensor warning. Thanks again!
I had the vehicle on a lift, but you can use the parking brake (it only holds the rear brakes) to keep the car from rolling away. Then work on one side at a time up front. Good luck, no worries.
Thanks very much for sharing. please keep up the great work to share. Is it the same procedure to remove/replace rear brake pads and rotors on G05? or is it more different and more complicated?
What is that tool you used to push the piston called and where can I purchase it? Thanks.
Brake caliper piston spreader tool. I use one like this. EWK Brake Caliper Press Tool Piston Spreader Pad 360 Degree Swing Ratchet a.co/d/8e3aDyk Amazon has a bunch of different varieties.