KZhead
Автокөліктер мен көлік құралдары

How to upholster a car door trim in vinyl (Door panel insert)

Cechaflo
2024 ж. 11 Қаң.
35 566 Рет қаралды
Жүктеу

✅Get our courses at: www.cechaflo.com
-----------------------------
Usually modern plastic car door panels are just upholstered in the upper central trim where the armrest and handles are.
The old upholstery was done in automotive fabric. This time the customer requested automotive vinyl.
It was necessary to add an extra new padding for this piece. A 3/8" of an inch foam was useful.
As you can see it was not really an easy task due to the concave area. I tried to lay the vinyl in a gentle way stretching it where it was necessary to avoid a future unsticking.
I hope you find some tips shown in the video useful!
Cesar

Пікірлер

  • Great stuff. I did a few jobs in vinyl recently and the best advice for anyone is to take your time at it. Once you get it right it's satisfying

    @TheBlaert@TheBlaert29 күн бұрын

  • With what I learned from you, I upholstered my 1986 alliance convertible completely in black genuine leather. I used my grandmother's Singer 301 machine. I couldn't have paid an upholsterer to do a better job. keep up the quality content

    @naturalborn008@naturalborn008Ай бұрын

  • Otra trabajo que parece difícil pero tú lo haces posible de hacer, Gracias Cesar por poner tu experiencia y aprender tu arte

    @Monagas1953@Monagas19534 ай бұрын

  • Just lo que necesitaba aprender, thanks so much 🙏

    @Elieli3188@Elieli318814 күн бұрын

  • This video couldn't have come at a better time! I am doing this same job on my Volvo. Using scrap vinyl to keep certain areas from sticking is something I hadn't even considered. Very smart! Going to try my luck tomorrow. Your videos are awesome and super helpful! Thank you!!!

    @tylerclark9899@tylerclark98992 ай бұрын

  • Hola compañero,para limpiar la espuma ya sea de paneles o techos usa alcohol de limpieza la verdad es que funciona muy bien. Saludos desde España, estoy empezando en el mundo de la Tapiceria y tus técnicas me ayudan mucho a mejorar 😊

    @bricobmwstyle@bricobmwstyle4 ай бұрын

  • I just want to send my interior to him! ❤❤❤

    @motorcopT2@motorcopT24 ай бұрын

  • Beautiful job ❤ the heat make more sense to help the vinyl curve amazing! Always helpful 👍

    @grandmasgopnik9642@grandmasgopnik96424 ай бұрын

  • I was just told at a shop that vinyl can’t be applied to a curvy headliner. I know that I’ve seen it done before completed and you’ve just shown the process.

    @mrbigg7255@mrbigg72554 ай бұрын

  • Impressive and excellent teaching as always thank you good sir !

    @1979augistine@1979augistine4 ай бұрын

  • Beautiful work 🥰

    @hijack4661@hijack46613 ай бұрын

  • I learned so much from your Videos. Thank you.

    @retlawginreuaj4837@retlawginreuaj48373 ай бұрын

  • Very nice job :)

    @jacekrenkas@jacekrenkasАй бұрын

  • super travail, comme d'habitude 😍😍😀😀

    @totof381@totof3814 ай бұрын

  • Bardzo pomocny film i fajne wykonanie Pozdrawiam

    @wiesawszyca612@wiesawszyca6124 ай бұрын

  • Nice 😊

    @tracycolorado@tracycolorado4 ай бұрын

  • good

    @CarTailoring@CarTailoring4 ай бұрын

  • Una técnica muy buena para poder pegar el vinilo de poco en poco, sin problemas de que se pegue donde no debe antes de hora 👏👏👏👏

    @deltajohnny@deltajohnny4 ай бұрын

    • Si es de gran ayuda para poder fijar la franja central que es concava.

      @Cechaflo@Cechaflo4 ай бұрын

    • Sus manos son milagrosas! 😉😉

      @deltajohnny@deltajohnny4 ай бұрын

    • @@deltajohnny Mas bien es la técnica que las manos.

      @Cechaflo@Cechaflo4 ай бұрын

    • ​@@Cechaflo aunque en su caso, se une todo 😉😉

      @deltajohnny@deltajohnny4 ай бұрын

    • Yes, simple but so effective!

      @wrenchpony9735@wrenchpony97353 ай бұрын

  • beautiful work. i just don't know if i'd go to leather trim...

    @lordmmx1303@lordmmx13034 ай бұрын

  • Maestro excelente video!!! que tipo de grapadora es la que utilizas? que grapas son que no pasan el trabajo?

    @wilsonrivera7957@wilsonrivera79574 ай бұрын

    • Es una engrapadora marca Senco de "naríz corta" Las grapas que uso para este panel de puerta son de 4 mm de alto. Estas grapas también sirven para los asientos de motocicleta, para evitar que traspasen. Hay grapas mas bajitas de 3 mm son mucho mejor. Para otros trabajos. como asientos de sillas y muebles uso una grapa mas alta de 9 mm de alto.

      @Cechaflo@Cechaflo4 ай бұрын

  • Hola. Una pregunta ¿que herramienta usa para romper el termo sellado de plástico? Saludos.

    @Xantiac@XantiacАй бұрын

    • Es un simple sacabocado ajustado al chuck (ajusta brocas) del taladro. Al girar el scabocado su filo corta circularmente.

      @Cechaflo@CechafloАй бұрын

    • @@Cechaflo muchas gracias!! Saludos!!

      @Xantiac@XantiacАй бұрын

  • 👍

    @yurycz8933@yurycz89334 ай бұрын

  • Hello. Is there a link to the tool that was used to remove or drill out the plastic weld?

    @Kauffdrop@Kauffdrop2 ай бұрын

    • It is just a simple hollow punch tool fastened with a drill chuck. www.harborfreight.com/9-piece-hollow-punch-set-3838.html

      @Cechaflo@Cechaflo2 ай бұрын

    • ​@@Cechaflo thank you so much!

      @Kauffdrop@Kauffdrop2 ай бұрын

  • Enjoyed the video. What was the name of the drill bit you used to cut out the plastic rivets/tabs holding the two pieces together?

    @jdimeo1966@jdimeo19664 ай бұрын

    • It is not a drilling bit. It is just a punch the drill is turning it around to cut the melted plastic excess to let the plastic post free.

      @Cechaflo@Cechaflo4 ай бұрын

    • Thanks for the response.@@Cechaflo

      @jdimeo1966@jdimeo19664 ай бұрын

  • 👍👍👍👍👍👍

    @maksatmyrat1971@maksatmyrat19714 ай бұрын

  • Vous faites vraiment un travail magnifique ! Bravo I Où achetez-vous la mousse ? Merci.

    @kerozen7592@kerozen75922 ай бұрын

    • Upholstery foams are bought at the upholstery stores. www.albrightssupply.com/sew-foam/sew-foam-1-4-t-shirt-backed-pink-clobac4h

      @Cechaflo@Cechaflo2 ай бұрын

  • What trype and thickness is the white foam being used?

    @Kauffdrop@Kauffdrop3 ай бұрын

    • It is a bonded 1/4th of an inch upholstery foam

      @Cechaflo@Cechaflo3 ай бұрын

    • ​@@Cechaflo thank you

      @Kauffdrop@Kauffdrop2 ай бұрын

  • What is the gum name used to stick it ?

    @ugramkonda@ugramkonda4 күн бұрын

    • kzhead.info/sun/opaxlcmym3huhqs/bejne.htmlsi=0bqrRAQ8AhXfBzPC&t=29

      @Cechaflo@Cechaflo4 күн бұрын

  • What is that drill bit?

    @gypcee376@gypcee3764 ай бұрын

    • It is not a drilling bit. It is just a punch the drill is turning it around to cut the melted plastic excess to let the plastic post free.

      @Cechaflo@Cechaflo4 ай бұрын

  • How long does this last ?

    @NoSoyYo-TV@NoSoyYo-TV4 ай бұрын

    • It could be more than 6 years. The vinyl is for automotive purpose resistant to sun rays UV

      @Cechaflo@Cechaflo4 ай бұрын

  • What kind of glue does he use

    @gladyscruz1333@gladyscruz13333 ай бұрын

    • Abrushable glue:kzhead.info/sun/opaxlcmym3huhqs/bejne.html

      @Cechaflo@Cechaflo3 ай бұрын

  • Nn fai vedere come fissi inserto su pannello

    @massimoabbandonato2014@massimoabbandonato20142 ай бұрын

  • Seems like an awful lot of extra unnecessary steps

    @my95buick@my95buick4 ай бұрын

    • You never did it by yourself.

      @lauramutzi375@lauramutzi3754 ай бұрын

    • And you sound like someone who's never done it.

      @tjewett1967@tjewett19674 ай бұрын

  • Sir, I also have a car seat shop. Do you need any seat tailor master in India?

    @chandramamaurya3648@chandramamaurya36482 ай бұрын
KZhead