KZhead
Тәжірибелік нұсқаулар және стиль

Soviet Chain Mortiser [Restoration] (Part 1 of 2)

Hand Tool Rescue
2018 ж. 16 Сәу.
1 315 157 Рет қаралды
Жүктеу

This tool restoration was on a Russian / USSR chain mortiser. I think it was made in 1973 by Electricgalvanic and has the model number IE-5601A. I do not know much else about this tool as most websites (which are in Russian) do not go into much detail. I believe the chain came in three different widths, and I have the 3/4" one. If you know more about this company or tool, please let us know in the comments.
The restoration itself was pretty straight forward as only a few pieces were missing. I decided to paint the tool as some of the photos of this tool online show it painted and the person I was restoring this for asked for it.
In this first part, I disassemble, clean, and paint the chain mortiser. In part two I reassemble, make new parts, and get it running. This thing is a beast!
I'd like to thank Evapo-Rust for sponsoring this video.
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue

Пікірлер

  • 1:56 The knob is actually a grease reservoir. It lubricates the bearing at the end of the bar. By turning the knob you squeeze grease out of the tube into the bearing.

    @Maloy7800@Maloy78005 жыл бұрын

  • This is the perfect Guy show. Tools, sped up for attention span, no drama, couple moments of humor and practically no talking.

    @ChrisBeardsley@ChrisBeardsley6 жыл бұрын

    • Thank you!

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • I appreciate those parts of these videos too. (PS - I am a woman)

      @accaliamurraymusic@accaliamurraymusic5 жыл бұрын

    • I couldn't agree more, honestly

      @SeiferTV@SeiferTV5 жыл бұрын

    • @@HandToolRescue hai? Broser! hai in Russia! you peace broser!

      @user-iw4gd9qf9s@user-iw4gd9qf9s4 жыл бұрын

    • Hey! I enjoy these videos too!

      @mm-jn1gz@mm-jn1gz4 жыл бұрын

  • Товарищ, верной дорогой идёшь в будущее! Партия не забудет тебя и твой труд!

    @Excvositorum@Excvositorum6 жыл бұрын

  • Ой, как приятно, что Вы взялись за раритетное изделие из СССР! Не зря говорили: советское - значит лучшее! Наши старые инструменты практически неубиваемые, сделаны с огромным запасом прочности. Хотя, дизайн не всегда на высоте, это правда. Зато работают, работают и работают! И посмотрите, внутри изделия - чисто, ни пыли, ни масла. С интересом жду продолжения! Успехов! Лайк!

    @MAKAR_3.14@MAKAR_3.14 Жыл бұрын

  • I've said it before, I'll say it again, HTR is an awesome channel showing how amazing results are not because of a billion dollar machine shop but because of very skilled hands. Eric also disassembles things like a normal human being. He doesn't act like hes performing miracles every time a screw is turned or a bolt removed. He beats and wrestles things apart 🤣

    @maggs131@maggs1312 жыл бұрын

    • Could not agree more. So much 'warmth' throughout these videos whereas a few restorers have become anal in their pointless attention to the enth degree. I feel like saying yes mate, we know you're brilliant and have expensive machinery but please, don't forget to love the thing you're restoring.

      @bayadere8308@bayadere8308 Жыл бұрын

  • Уже пол года просматриваю в сторону такого долбежника, а сейчас и инструкция по ремонту есть😃 Спасибо 👍👍👍привет с Кузбасса🐻

    @zaholoostie@zaholoostie3 жыл бұрын

    • My father has one that his father gave to him that I will someday cherish. Cheers!

      @a.azazagoth5413@a.azazagoth5413 Жыл бұрын

  • Comedic and informative, Hand Tool Rescue shows the methodically challenging process of turning trashed tools into well-oiled machines!

    @SourGummiWyrm69@SourGummiWyrm696 жыл бұрын

  • Представьте если он доберётся до реставрации бензопилы "Дружба")) Вот обматерится)

    @KofaYoh@KofaYoh6 жыл бұрын

    • Svidu Prost пила дружба наше все! Надо ему намекнуть

      @user-qk8ez4wf1n@user-qk8ez4wf1n6 жыл бұрын

    • Не не не! Мне нравится его контент и я не хочу терять адекватного ютубера)

      @KofaYoh@KofaYoh6 жыл бұрын

    • Да, уж! Вроде бы не сложное устройство, но одной серией не обойдётся!..

      @videograph2697@videograph26976 жыл бұрын

    • Главное ему наш москвич не показывать

      @TheDarkvindetta@TheDarkvindetta6 жыл бұрын

    • ему уже прислали "дружбу". можно в инстаграме посмотреть

      @JackDanielsnumberone@JackDanielsnumberone6 жыл бұрын

  • I like your videos so I thought I'd try to help a bit with this thing. It's a 3-phase 220V 50Hz instrument. The label says "Depth 160mm, 2800 RPM" (I suppose you guessed that). The code under the model index is the "special technical conditions" which is the technical standard for this particular tool. Interesting thing about this is that it's made for the voltage standard that doesn't exist anymore. USSR used to be either 1-phase 127V or 3-phase 220V, then it changed in the 50s-70s. The tool was manufactured by the "Electrovypriamitel" (good luck pronouncing that :-D) plant (hence the EV abbreviation on the label). The plant's name is translated as "electric rectifier". The plant is located in the city of Saransk. It still works, btw, but no idea what they make. This model was produced from at least 1969 till early 1980s. Hope it helps.

    @Maloy7800@Maloy78005 жыл бұрын

  • This vintage equipment so rugged I love it! And I love that you’re restoring them back to working order.

    @chrisandrus2735@chrisandrus27356 жыл бұрын

  • I'm an 82 to woman and I love your videos. Everything about them.

    @vernabink2865@vernabink28653 жыл бұрын

    • Thank you!

      @HandToolRescue@HandToolRescue3 жыл бұрын

  • What I like most on your videos is the fact, that you immediatley start with disassembling and working and not showing every little defective part, rust and so on over and over again like other guys. And of course the sandblasting with your head on the lid. Go on!!!

    @ritchie65@ritchie653 жыл бұрын

  • 3:25 Dude, that screwdriver! If it had a hex socket type deal, that thing would be unstoppable!

    @Kolajer@Kolajer6 жыл бұрын

    • Maybe I will remake those one day as well!

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Hand Tool Rescue That's what I'm talking about!

      @Kolajer@Kolajer6 жыл бұрын

    • I will have one!

      @mercuryus@mercuryus6 жыл бұрын

    • Is your Screwdriver an H.D. Smith & CO No 611 "Perfect Handle" Triple Lever Screwdriver. They were the original Makers in Connecticut of this style of Screwdriver. Here is a link from Progress is fine all about H.D.Smith and Co. progress-is-fine.blogspot.com/2012/12/the-perfect-handle-screwdriver.html and one from WK Fine Tools otools1.wkfinetools.com/mechanicT/HDSmithCo/tools/AdjustScrewDriv/AdjustScrewDriv-2-01.asp The Second page has W.S Thomsons Patent application dated Aug 8th, 1911 with a great drawing of the Screwdriver. I would think that if you were to bring back this line, tool rescuers would buy. I have seen you with other Perfect handles but the could be knockoffs or German made. I know what I am going to be hunting for this summer...

      @RossTFarnsworth@RossTFarnsworth6 жыл бұрын

    • Kolajer i try to google it...but you cant get it...its not available for sale..😑

      @wasimjaan3300@wasimjaan33006 жыл бұрын

  • The wire wheel bit cracked me up. This tool is really interesting. I can't wait for part 2!

    @JamesBowers@JamesBowers6 жыл бұрын

    • wait a minute, your comment was a day ago, but this upload just arrive on my subs 5 mins ago, how is it possible ?

      @OeMpaK@OeMpaK6 жыл бұрын

    • Sorcery.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Now I know what I've been doing wrong :-)

      @BarryIrwin@BarryIrwin6 жыл бұрын

    • the owem One of the benefits of being a Patron. 😀

      @Crewsy@Crewsy6 жыл бұрын

  • Literally more care and attention paid to this than ANY Soviet-era Russian machine produced for any purpose previously. Congrats...

    @PunXX0r@PunXX0r6 жыл бұрын

  • меня больше удивляет его необычайный набор инструмента, чем сам забойщик.

    @FoGzqx@FoGzqx5 жыл бұрын

  • Amazing work so far brother. I'll keep those sandblasting techniques in mind for my future usage.

    @skullandspade@skullandspade6 жыл бұрын

    • I don't like sand, it's course, and rough ,and irritating ,and it gets everywhere.

      @MorbidlyObeseChell@MorbidlyObeseChell5 жыл бұрын

  • Из России с приветом! Подписан на канал уже с пол года. Спасибо за видео)

    @zahar785@zahar7856 жыл бұрын

    • Спасибо за просмотр!

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Поддерживаю, молодец! Мне понравилось как он провода топором рубил, это очень по Русски!

      @lyubomirgarev1616@lyubomirgarev16166 жыл бұрын

    • Украина тоже смотрит )

      @user-tt8xb5ib2j@user-tt8xb5ib2j6 жыл бұрын

    • Смотрит, смотрит.

      @user-vj8nc2ic6s@user-vj8nc2ic6s6 жыл бұрын

    • Тоже из России, смотрю канал с удовольствием и ставлю лайки ещё до просмотра!

      @videograph2697@videograph26976 жыл бұрын

  • Никогда такой штуки не видел. Интересная вещь!

    @user-ui2md3oi3d@user-ui2md3oi3d6 жыл бұрын

  • I can’t believe you’re from Saskatchewan Canada because I’m from British Columbia Canada you’re my favourite KZhead channel can’t believe the things you restore and it is a part of history

    @HankHill4@HankHill46 жыл бұрын

  • I think that adjustment knob you arnt sure of is an oil well. From the bar and chain.

    @leightonboster3332@leightonboster33326 жыл бұрын

    • Makes sense now.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Agreed, an oil pot/grease pot for the bar roller.

      @jballew2239@jballew22396 жыл бұрын

    • Yup thats putting oil down to the rolly fun bit

      @MrRadioAct@MrRadioAct6 жыл бұрын

  • Your videos are some of the best restorations i have seen,you really take the time to work with each part.nothing left behind, great work.

    @MrToyota73@MrToyota734 жыл бұрын

  • The Motherland is proud of you by restoring this Glorious Piece of Soviet Machinery. ЗЛАВА ТОВАРИЩ!

    6 жыл бұрын

  • The axe instead of some cutters was *chefs kiss*

    @johnmagus6341@johnmagus63412 жыл бұрын

  • Love the color! What a great way to start the morning.

    @TheGoodoftheLand@TheGoodoftheLand6 жыл бұрын

    • Cool!

      @harkinspat12@harkinspat126 жыл бұрын

  • I would be very surprised if you took this saw apart without a hammer) With greetings from Russia

    @AhtoxaGnesus@AhtoxaGnesus6 жыл бұрын

    • That's what I like about Russians, they embrace their own stereotypes and have a good laugh about it.

      @Papperlapappmaul@Papperlapappmaul6 жыл бұрын

    • They have to embrace their stereotypes... The government requires it.

      @videosunrelated1883@videosunrelated18836 жыл бұрын

    • Well, well, well

      @hackdogx5256@hackdogx52566 жыл бұрын

    • Посмотрите внимательно, как автор обходится с устройствами сделанными в США!

      @videograph2697@videograph26976 жыл бұрын

    • надеюсь тут он не будет "играться деталями" и "пробовать нутеллу" под видом отработанной смазки

      @TheDarkvindetta@TheDarkvindetta6 жыл бұрын

  • It's always a pleasure to see you work, I'm waiting for the second part...

    @macduggi@macduggi6 жыл бұрын

  • Nothing short of absolutely amazing. Thank you!

    @genxfordguy1380@genxfordguy13805 жыл бұрын

  • 5:29, using an axe as a wirecutter.😀

    @NOWThatsRichy@NOWThatsRichy6 жыл бұрын

    • Why use cutters when you have a Viking Battle ax handy?

      @tomtruesdale6901@tomtruesdale69016 жыл бұрын

    • Hey it worked.

      @MrBobbin01@MrBobbin016 жыл бұрын

    • axe is a national russian tool (as russians says). it works with rasputin face as at 15-40)

      @turtlesteam7895@turtlesteam78956 жыл бұрын

  • What I found about this thing, was the following: The IE-5601A has an in-built squirrel-cage motor with cooling fan attached to the rotor shaft on one side and driving gear on the other. The gear moves the cutting chain which is pulled on the guide bar by the limit screw (the one, you're not sure about). The head with chain can be moved within directional columns that are installed on the base of the mortiser. If you press the lever the head goes down. It is lifted with springs automatically. This thing can mortise to maximum depth of 160 mm. The sizes of possible mortises are: 8х40х100; 12х60х160; 16х60х160; 20х60х160 mm. Overall sizes of the mortiser: 310х300х505 mm., the mass is 22 kg. They also say, that you can find these brand new on flea markets for 3-4k rubles (roughly 48 - 65 USD). Hope this might be useful and sorry for the possible translation errors.

    @mikescherbakoff1@mikescherbakoff16 жыл бұрын

    • Михаил Щербаков thanks for the information

      @charlieboyzname@charlieboyzname6 жыл бұрын

    • да, еще их было несколько модификаций: www.shoptool.ru/article/2.html И судя по вот этому объявлению: www.olx.ua/obyavlenie/dolbezhnyy-pazovalnyy-shiporeznyy-ie-5601-IDuc9Gg.html#802b7d00d3 как минимум моторы для этих станков производились вот тут (в 50е точно, судя по фотографиям из объявления) - www.vibrators.ru/ Думаю, что если обратиться в архив завода - можно найти более подробную информацию :)

      @a.krugliak@a.krugliak6 жыл бұрын

  • Man love watching your work. And super jelly of some of the tools you have on hand. Awesome watch, both parts, as always

    @zyxwvutsrqponmlkjihgfedcba0@zyxwvutsrqponmlkjihgfedcba06 жыл бұрын

  • this is well made for a late era soviet tool. i'm impressed.

    @theghostofthomasjenkins9643@theghostofthomasjenkins96433 жыл бұрын

  • Sharpening the wire wheel with a file, what a savage!

    @Theremoore@Theremoore6 жыл бұрын

    • I've often wondered how to do that. I learned something new today. I've also often wondered how many wires have flung off that wheel and are embedded in his shop coat

      @MrBruce-np9rj@MrBruce-np9rj6 жыл бұрын

    • might be a stupid question but what's with the paint can at 17:45

      @mat100ca@mat100ca5 жыл бұрын

  • "Comrade, we don't have any three-pole switches!" "Never mind, use two-pole, motor will stop!"

    @Ragnar8504@Ragnar85043 жыл бұрын

  • Yep, that screwdriver is just A-W-E-S-O-M-E! I'm looking forward to part 2!

    @rayjones3212@rayjones32126 жыл бұрын

  • This is my favorite one yet! Can't wait for part 2

    @Verthias@Verthias6 жыл бұрын

  • l like the color you painted it,

    @mustie1@mustie16 жыл бұрын

    • Thanks! Wood.Work.LIFE. on KZhead chose that colour, as it will be his.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • l have the drill in the attic , in the event l can ever find a carb kit, but if you find that you want it back sooner just let me know.

      @mustie1@mustie16 жыл бұрын

    • Nice work! But, i'm afraid, that our soviet industry didnt used any paint at all, becouse paint is a capitalist intrigues) (kidding). Glad to see something from Russia on your channel! Love it!

      @IvanumASS@IvanumASS6 жыл бұрын

    • Could have painted it communist red lol

      @maggs131@maggs1316 жыл бұрын

    • now it's a Makita lol

      @helojoe92@helojoe926 жыл бұрын

  • Great job as always Eric

    @enelgaragedemartincho@enelgaragedemartincho6 жыл бұрын

    • Thanks

      @eporter5071@eporter50712 жыл бұрын

  • Cracked me up when you head-butted the sandblaster window, and then even more when you looked at the camera with that look. Made my day. XD

    @DataDawg59369@DataDawg593695 жыл бұрын

  • As it’s sped up, when you put your head on to the sand blaster it looks like you just threw your face into it.... that made me chuckle, the face you pulled afterwards had me in stitches!! Great video! And that screwdriver thing looks so handy!

    @BubbaZanetti6666@BubbaZanetti66666 жыл бұрын

  • That wire cutter works well, too.

    @moehoward01@moehoward016 жыл бұрын

  • Эхх, синяя изолента, значит можно было и не разбирать!))

    @user-sx9nv3oh5r@user-sx9nv3oh5r6 жыл бұрын

    • наверное он не знает про силу изоленты . Американцы обычно используют армированную ленту серого цвета

      @TheDarkvindetta@TheDarkvindetta6 жыл бұрын

    • ник ники синяя изолентв лечит геморой что б ты знал

      @TinTaBraSS777@TinTaBraSS7775 жыл бұрын

    • Да че они понимают, такую вещь запаганил)

      @Shaitan1978@Shaitan19784 жыл бұрын

    • Там покруче заклинание было: алюминиевая проволока! 0:14 Да и заводской шильдик закрасил, за такое, этому "реставратору" руки оторвать...

      @RussianEngineer@RussianEngineer3 жыл бұрын

    • Он синей изолентой обмотал один из двух проводов, чтобы так отметить и потом при сборке не перепутать.

      @victorbrand8913@victorbrand89132 жыл бұрын

  • That opening song into the socket wrench sound transition was amazing xD

    @Chunbar@Chunbar6 жыл бұрын

  • I can not wait to see the finished product that thing should be a beast

    @jeremiahbuzzard9900@jeremiahbuzzard99006 жыл бұрын

  • ты молодец и с чувством юмора )✌

    @inoy_podhod@inoy_podhod6 жыл бұрын

  • I really liked how you chopped a wire with an axe at 5:27. Probably you have some Soviet relatives :-D Also if anyone cares, it is really amazing how geographically diverse this thing is: bearing at 10:19 is from 13-ГПЗ factory in Vinnitsa (Ukraine) and bearing at 14:25 is from 3-ГПЗ factory in Saratov (Russia). That's like 1300 km. or so...

    @onabikewithadrone@onabikewithadrone6 жыл бұрын

    • Thanks for the information!

      @HandToolRescue@HandToolRescue6 жыл бұрын

  • Вообще отлично! Спасибо за интересные видео. Очень рад, что смог отреставрировать такую раритетную вещь, как эту пилу времён СССР!

    @BgushBour@BgushBour6 жыл бұрын

  • That roller bearing at the tip was mind blowing - we're so used to standard ball bearings.

    @Pillowcase@Pillowcase2 жыл бұрын

  • Part 2 Soon Please

    @TheSasquatch33@TheSasquatch336 жыл бұрын

  • люди будут телепортироваться на другие планеты, жить в виртуальной реальности, загружать знания в мозг подобно компьютерным программам, - а эта хрень всё равно будет работать.

    @mrLumen2@mrLumen26 жыл бұрын

    • Не такая уж и хрень! Ей всего лишь 45!

      @videograph2697@videograph26976 жыл бұрын

    • ... на росийских заводах, ведь со времён совка нихуя не производили

      @9999Mihas@9999Mihas6 жыл бұрын

    • и при том что это делалось в латвии

      @9999Mihas@9999Mihas6 жыл бұрын

    • Yeah what he said.

      @MGZetta@MGZetta5 жыл бұрын

    • mrLumen2 так точно!

      @javierhernandez1390@javierhernandez13905 жыл бұрын

  • Хорошее видео ,за гимн СССР отдельное спасибо.

    @user-xx5mk4jg8x@user-xx5mk4jg8x2 жыл бұрын

  • Addictive video mate. Keep up the good stuff. Can't wait for part 2.

    @aniket.khade27@aniket.khade276 жыл бұрын

  • I live for your videos

    @beatsbydrew8930@beatsbydrew89306 жыл бұрын

  • 0:48 We call this type of repair (with piece of wire) "country welding".

    @andrewparamonoff@andrewparamonoff2 жыл бұрын

  • God bless you for all of the flat head screws you deal with.

    @brianewhiteguy@brianewhiteguy6 жыл бұрын

  • Hey I was just scrolling down on KZhead here and I found one of your videos and you make me smile and I love to see you restore these tools keep it up 👍

    @austinbob7291@austinbob72913 жыл бұрын

  • Советское - значит отличное! Потому что работали Инженеры, а не маркетологи. Поработает теперь эта пила ещё лет 40. Жду каждый раз с нетерпением новых проектов :) PS топор, лом и проволока для советской техники просто необходимы и порой мне кажется шли в комплекте.

    @Wildclove@Wildclove6 жыл бұрын

    • @@Ananas0902 Не спизжено, а куплено! Знайте своё прошлое и не выдумывайте херни!

      @baxxxxful@baxxxxful5 жыл бұрын

  • Dude... please tell me you're gonna say "previously on Hand Tool Rescue" on the next video...

    @anivale@anivale6 жыл бұрын

    • Oh, 100%.

      @HandToolRescue@HandToolRescue6 жыл бұрын

  • Hand Tool Rescue + AvE = greatest collab ever.

    @axelmilan4292@axelmilan42926 жыл бұрын

  • The wiring in this tool is so much nicer than previous american made tools you have restored. And it was grounded, Thats amazing.

    @SHOINOFF@SHOINOFF3 жыл бұрын

  • LOL, Stroganoff powered!

    @WilliamTMusil@WilliamTMusil6 жыл бұрын

  • Is that pipe that runs the length of it some sort of tube that allows you to oil that bearing?

    @TheOneAndOnlyTBash@TheOneAndOnlyTBash6 жыл бұрын

    • Possibly!

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • That was my thinking too, it's an oiler.

      @MukYJ@MukYJ6 жыл бұрын

    • It is definitely oiler. I have something like that on my tractor. You unscrew the big cap and fill it with grease. While you screw it back it pushes grease trough the small tube to the chain guiding roller bearing.

      @selmirikanovic@selmirikanovic6 жыл бұрын

    • I'm going to add my .02 and say the same thing, its got to be an oiler, I think that plastic cover unscrews. I was scanning the comments to see if anyone else picked up on that.

      @Fierofreak01@Fierofreak016 жыл бұрын

  • Thanks for the wire wheel sharpening lesson & I can never find my wire cutters so thanks for that idea too!

    @sirpainter1@sirpainter16 жыл бұрын

  • This channel makes me so happy. Thanks for what you do guy :)

    @hendrikkleyn8571@hendrikkleyn85715 жыл бұрын

  • In mother Russia we mortise with chainsaw

    @markchatman9583@markchatman95836 жыл бұрын

    • It's the most fun way to mortise.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • In Austria we do too ;)

      @L30ne@L30ne6 жыл бұрын

    • In Canada, we just say "sorry"

      @oobaka1967@oobaka19676 жыл бұрын

    • I think Mr Chekhov on USS Enterprise said that Russia inwented the Mortise.

      @Bill23799@Bill237996 жыл бұрын

    • With 3-phase grounded chainsaw made from STALINIUM

      @MaximilianBrandt@MaximilianBrandt6 жыл бұрын

  • 2:50 DON'T TRY THIS AT HOME, HE'S A TRAINED NINJA

    @rafzan@rafzan6 жыл бұрын

  • Great video! Made me LOL, several times! I never knew about sharpening wire wheels, now I'll have to sharpen all of mine...

    @TrojanHorse1959@TrojanHorse19596 жыл бұрын

  • Beautiful old machine, I would love to get my hands on one.

    @ponkkaa@ponkkaa6 жыл бұрын

  • I think the tool is single phase 220 - 240V - if it was 3 phase, the third leg would also have been switched...

    @alc818@alc8186 жыл бұрын

    • it`s actually 3-phase and 220V.

      @turtlesteam7895@turtlesteam78956 жыл бұрын

    • After looking at your video again, the ID plate certainly indicates that it is a 3 phase unit. I also found that it is not uncommon to find only 2 legs of three phase power being switched as the third leg is required to spin the motor. Having said this, it may be unsafe to do so depending on how well the motor winding is insulated from the frame. I do not believe the US NEC would allow this, but it is a Russian tool and they may well have approved of this practice. I would be careful to insure that the tool is not used in wet conditions or left plugged in when not in use.

      @alc818@alc8186 жыл бұрын

  • The Soviets made some pretty rugged gear.

    @scottmclennan6114@scottmclennan61146 жыл бұрын

    • Scott McLennan that casting mold was worn out AF tho

      @felixar90@felixar906 жыл бұрын

    • Scott McLennan almost all was 1:1 copy from Germany or USA made. Sad, but true

      @Deemon1@Deemon16 жыл бұрын

    • It seems to me that Soviet equipment and machinery tended to be ugly and clunky, the technology really old and obsolete in the West, the build quality ridiculously variable, ranging from "perfect" to "entire factory was badly hungover from weekend bender." But they were usually ridiculously simple and user serviceable, and insanely over-engineered, so once the user worked out the factory defects, it would last forever and withstand pretty much any abuse that was thrown at it. A lot of small workshops in Europe will buy this stuff because they can get it cheap and they can rely on it. Look at Lauri's big lathe (hydraulic press channel) It's an ancient Russian machine that he and his dad have modified with modern controls and such, but the thing is a tank. I guarantee that it needed substantial tweaking by the original owner back when it was new, however.

      @puckcat22679@puckcat226796 жыл бұрын

    • felixar90 yes there were cracks aplenty.

      @scottmclennan6114@scottmclennan61146 жыл бұрын

    • puckcat22679 yes that’s what I meant, over-engineered and pretty heavy duty.

      @scottmclennan6114@scottmclennan61146 жыл бұрын

  • Awesome work looking forward to part 2!

    @grandprismatic@grandprismatic6 жыл бұрын

  • Another great find. Looking forward to seeing part 2.

    @mtmchenry@mtmchenry6 жыл бұрын

    • Soon!

      @HandToolRescue@HandToolRescue6 жыл бұрын

  • In Soviet Russia, hand tool restores you.

    @Owiko7@Owiko76 жыл бұрын

  • 👌👌👌 sooo when are we going to start production of that screwdriver thing? Cuz I got to get one of those!!!

    @davidhelmuth7654@davidhelmuth76546 жыл бұрын

    • Haha, maybe one day.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • That is the most badass tool I've seen in a while.... fucking mint 👌

      @chrisgrubisa3819@chrisgrubisa38195 жыл бұрын

  • I always love you videos....they are interesting, very relaxing and satisfying to watch! cheers

    @Deliz1@Deliz16 жыл бұрын

  • Can't believe you painted this beautiful aluminum beast.

    @DasGrinch@DasGrinch4 жыл бұрын

  • Stereotypical Russian made. Big on toughness, infinitely repairable, low on tech. Or, as we used to say "Strong like ox, smart like streetcar".....lol......Was that part you were wondering about a tube to oil the nose sprocket bearing? Oh yeah....I love the desoldering tool.

    @JimDockrellWatertone@JimDockrellWatertone6 жыл бұрын

    • American technology of that time is also not particularly "technologically". At the same time in the Soviet line of woodworking machines were excellent options that will give odds to modern machines. Many Russians still have Soviet irons, stoves and other household appliances in their cabinets, which can help out in the event that the new fashion equipment does not work for more than a couple of months.

      @gsx743@gsx7436 жыл бұрын

    • i think two that it is a greaser for the nose-wheel, turn and grease system...?

      @metaalateliermetal@metaalateliermetal6 жыл бұрын

    • Is good, strong like bear!

      @bnadvornik@bnadvornik6 жыл бұрын

    • Скажи это нашим танкам.

      @user-mm5db4zk1i@user-mm5db4zk1i6 жыл бұрын

    • Михаил Бурмистров танки то тоже по такому же принципу, полудурок

      @VentelR@VentelR6 жыл бұрын

  • Dosvedonya (sorry the only Russian I know if from Bond movies...) That is going to be one amazing tool. I still wonder why they made it three phase? Maybe Russian electric motors aren't that good? I was thinking to myself the whole time "American components, Russian components, all made in Taiwan.) Super excited about this!

    @WoodWorkLIFE@WoodWorkLIFE6 жыл бұрын

    • Thinking about it now, it's essentially a brushless DC motor, which is basically a three-phase AC motor.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • that three-phase asynchronous motor with squirrel-cage rotor

      @jimsmith5148@jimsmith51486 жыл бұрын

    • It is partially correct that three-phase motor was implemented there because of poor quality of single-phase motors. But maker of motor isn't as important, Russian or US or UK or whatever else, this item was built for industrial use so brushed AC motors and even 1-phase async motors are really worse because these motors have limited-life spares like brushes or capacitors. And there were no problems to have 3-phases current on the factory. In USSR that really matters because of total deficit of consumables. I used to make brushes myself from the trolleybus' current collectors for some handtools with brushed motors and it was a real challenge. So I fully understand the reason why this motor was put there. It was the only way to provide long life of the appliance.

      @yurikounikov4308@yurikounikov43086 жыл бұрын

    • Thanks so much, it is awesome to get actual answers on the internet. That totally makes sense in a factory setting. I would've imagined these being more field tools and having dedicated machines for factories that weren't as portable, but it would totally make sense to have on of these in a factory. I wonder what it would have been used for?

      @WoodWorkLIFE@WoodWorkLIFE6 жыл бұрын

    • I suppose my English is just a bit better than your Russian ))) When I use words "factory" or "industrial" in concern of this tool I jusn mean "not for household". The use of this tool is obvious - to punch rectangle holes in the wood details, up to 160mm deep. You can watch this item running here: kzhead.info/sun/YJWuosytpIuMqX0/bejne.html

      @yurikounikov4308@yurikounikov43086 жыл бұрын

  • I love your videos! You always get really fascinating stuff to "rescue"

    @garfield1415@garfield14156 жыл бұрын

  • I wish everything was made this well. It seems very clean and tidy and easy to service!

    @domeatown@domeatown6 жыл бұрын

    • Definitely fun to take apart.

      @HandToolRescue@HandToolRescue6 жыл бұрын

  • СОЮЗ НЕРУШИМЫЙ РЕСПУБЛИК СВОБОДНЫХ!! Привет из России

    @Merik-1337@Merik-13376 жыл бұрын

    • Блин, оказывается я не один из Союза на этом канале!

      @videograph2697@videograph26976 жыл бұрын

    • не один )

      @SignumHero@SignumHero6 жыл бұрын

    • VideoGraph это круто

      @Merik-1337@Merik-13376 жыл бұрын

    • Алексей Степ 👌

      @Merik-1337@Merik-13376 жыл бұрын

    • Я ваш голожопый союз на хую вращал. Совкодрочеры должны повторить великий подвиг всея свк - стать историей, которую ни в коем случае нельзя повторять, будучи в здравом рассудке. И вообще, откуда у передающего прЕвЕд "из эСэСэСэР" буржуйский персональный компьютер и интернет? Пиздуйте паять клон "спека" на лампах... И аккуратней, чтобы сосед в НКВД не вломил, а то ещё сгноят по Сибирям за подрывную деятельность и шпионаж Пиздато в совке было, слов нет. Свободно так...

      @nesurasen5978@nesurasen59785 жыл бұрын

  • The soviet communist anthem killed me aha. Great vid man!

    @JohnT2001@JohnT20016 жыл бұрын

    • Summer/Fall this year.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Аппарат для установки замков

      @user-rr5ud4qy9n@user-rr5ud4qy9n2 жыл бұрын

  • So many parts alas not enough time. Looking forward to next video!!

    @glenpeacock8597@glenpeacock85976 жыл бұрын

  • jeezus you had fun on this one. so many derp clips like... that spray can you wire brushed. you have me chuckling!

    @TizonaAmanthia@TizonaAmanthia6 жыл бұрын

  • 0:53 Russian nano provolka☻

    @dinozauer@dinozauer6 жыл бұрын

    • проволОка

      @user-dx1yn7es8c@user-dx1yn7es8c5 жыл бұрын

    • сергей приходько проВОДКА

      @yarikkhotko4436@yarikkhotko44365 жыл бұрын

    • ПроВолодька

      @DelOk85@DelOk854 жыл бұрын

  • In Russia saw repair's it's self

    @terminatordill6797@terminatordill67976 жыл бұрын

    • Бред

      @DelOk85@DelOk854 жыл бұрын

  • Daymn!, that H.D. Smith screwdriver is a nice bit of kit!

    @mortoopz@mortoopz5 жыл бұрын

  • I love this! 5 minutes in and I'm like oh he needs to cut the wire. Then you bust out an axe and chop it. Perfection!

    @bradleyjohnson3056@bradleyjohnson30563 жыл бұрын

  • Лайк если слушал советский гимн стоя

    @JohnBrowntown@JohnBrowntown6 жыл бұрын

  • "I'm not sure what this does" don't worry,neither do the Russians

    @drivernephi2115@drivernephi21153 жыл бұрын

  • Awesome my brother I can't wait for the 2 part good job very nice later :)

    @TJSWOODWORKINGSHOP@TJSWOODWORKINGSHOP6 жыл бұрын

  • This is going to be fantastic when it's finished :) The colour you picked is great ॐ

    @TheWoodYogi@TheWoodYogi6 жыл бұрын

  • Made in Japan: 1kg Made in USA: 3,5 kg Made in German: 6,5 kg Made in Russia: 15,00 kg 🤣🤣🤣

    @rea50@rea505 жыл бұрын

    • не 15, а 22.

      @RussianEngineer@RussianEngineer3 жыл бұрын

    • I had to check that - you can still buy a brand-new Makita chain mortiser and it weighs 18 kg! A German Mafell weighs less than half at 8.7 kg!

      @Ragnar8504@Ragnar85043 жыл бұрын

  • Привет из России. В начале видео играет гимн СССР) Мы не коммунисты, вставь современный гимн на вторую часть этой рестоврации.

    @KofaYoh@KofaYoh6 жыл бұрын

    • That is exactly my plan! I want to play the modern one once the tool is fully restored, since it was originally made in the USSR.

      @HandToolRescue@HandToolRescue6 жыл бұрын

    • Ты меня успокоил товарищ. Пойду выпью водки и погуляю со своим домашним медведем рядом с ядерным реактором))) Желаю успехов в работе)

      @KofaYoh@KofaYoh6 жыл бұрын

    • Не забудь сыграть на балалайке)

      @dinozauer@dinozauer6 жыл бұрын

    • Вроде же самагонка ?)))

      @DaMIR163@DaMIR1636 жыл бұрын

    • рестОврации??? Неплохо было-бы патриоту хотя-бы Русский язык подучить)))

      @videograph2697@videograph26976 жыл бұрын

  • Great as always and Dope wire cutterz.... !!!

    @leeedmunds2539@leeedmunds25396 жыл бұрын

  • love those lil antique wrenches.

    @chetleonard169@chetleonard1696 жыл бұрын

  • 19:06 Табличка должна была быть снята, выпрямлена и после покраски детали посажена на клепки заново. Халтура!

    @azat5731@azat57314 жыл бұрын

  • This is not a Russian instrument. Correctly say the USSR.

    @13PAYOH@13PAYOH6 жыл бұрын

    • Dmitriy Vengerov Россия приемник СССР и всё что было произведено можно со смелостью относить к России и русским.

      @user-qk8ez4wf1n@user-qk8ez4wf1n6 жыл бұрын

    • Anything west of Germany is USSR/Russia until you hit Mongolia.

      @geineddie@geineddie6 жыл бұрын

    • Could still have been Russian built during the Soviet era.

      @Crewsy@Crewsy6 жыл бұрын

  • Previous owner was like "I dont give a shit about cleaning my tools". Good Job btw ! I like how it turns out !

    @AnthonyMalesys@AnthonyMalesys6 жыл бұрын

  • Ahh the old puller-drift and pry-chisel action 😎

    @makingthings277@makingthings2775 жыл бұрын
KZhead