KZhead
Тәжірибелік нұсқаулар және стиль

The Manufacturing Process of Industrial Valves. 62 Years Old Cast Valve Factory in Korea

Factory Monster
2023 ж. 25 Қаң.
1 842 905 Рет қаралды
Жүктеу

The Manufacturing Process of Industrial Valves. 62 Years Old Cast Valve Factory in Korea
This video does not contain any paid promotion
📌Product in Video: bit.ly/3DiKF7g (SAMYANG VALVE), bit.ly/3XRB2V6 (SAMYANG VALVE KZhead)
📌Contact: factorymonster2021@gmail.com
📌Copyrightⓒ 2021. Factory Monster. All Rights Reserved

Пікірлер

  • ※This video does NOT include any paid promotion※ ※ 위 영상은 유료광고를 포함하지 않습니다 ※ 📦 제품문의(Product Inquiries): bit.ly/3DiKF7g (삼양발브), bit.ly/3XRB2V6 (삼양발브 유튜브) 🎬 촬영문의(Filming Inquiries):​ ​​factorymonster2021@gmail.com -I film for the company who are proud of showing how their products are made. -팩토리몬은 제품에 자신있는 소상공인 분들과 중소기업을 대상으로 무료촬영을 진행합니다. Copyrightⓒ 2021. Factory Monster. All Rights Reserved.

    @Factory_Monster@Factory_Monster Жыл бұрын

    • ho g

      @rinkyrana856@rinkyrana856 Жыл бұрын

    • 이거 자막이 왜케 웃기죠ㅋㅋㅋ 진지하게 보는분이 없어서 몰랐네요

      @tubeYou-ir8nu@tubeYou-ir8nu Жыл бұрын

    • Yo7

      @shkelqimmebelli6584@shkelqimmebelli6584 Жыл бұрын

    • Get an insert drill. You waste too much time center drilling all of those flange holes.

      @JD-hh9io@JD-hh9io Жыл бұрын

    • there is a scammer replying to our comments

      @jasonstalder5208@jasonstalder5208 Жыл бұрын

  • From USA - Thank you so much for these videos. Too many channels just jump all over and the process is unclear. In 4 years this is the VERY BEST casting detail ever! The sand, core, insert, and especially the hand painting and detailed cleaning of imperfections and the sealant application are very very useful and effective for really learning the details to create such high quality casting. I am hoping to purchase a foundry very soon, and I always felt that it was possible to create much better finishes. I am sure there are other videos out there, but this is the best one I have seen, especially the details of hand cleaning, brushing so carefully the sand, and then firing it before pouring. Even loading the scrap and seeing the different materials they melt. Of course the HBM milling and assembling the valves with the brass seals and diaphragm, you covered SO much without skipping the important parts, and I really appreciate the captions too. There are so many Chinese videos that skip or rush, and most Japanese ones are about very old hand crafted pieces, which is fine, but the combination of efficiency, quality, and the energy of Korean Industry has always filled me with inspiration. Again, thank you so much for this! Maybe you can come visit some day and share and collaborate on processes here. Thank You!! Joe

    @joediverfl@joediverfl Жыл бұрын

    • I share this sentiment as well, sometimes(most times) I just want to watch the process in full, with reasonable detail, without the fluff and the jumping around. Unfortunately, it's rare so this channel is a great find. Good luck with your foundry!

      @maryckbuilds@maryckbuilds Жыл бұрын

    • Sex

      @47err96@47err96 Жыл бұрын

    • Samyang valve

      @user-zt8zx1sm2t@user-zt8zx1sm2t Жыл бұрын

    • 오바하지마라 조다이버 2023년 기준 너무 구식 설비다

      @user-wf1hs9pt6j@user-wf1hs9pt6j11 ай бұрын

    • I plan to start a valve making factory in africa,angola.

      @junaidanwar999@junaidanwar9996 ай бұрын

  • 영상으로 보니 너무 반갑네요... 저희 아버님께서 30년 넘게 근무하던 곳인데.. 저도 몇번 가본곳이고

    @byulthree@byulthree Жыл бұрын

    • 느그앱이 노가다꾼이었구나ㅋㅋ

      @user-ug9wj7xf4l@user-ug9wj7xf4l Жыл бұрын

    • @@user-ug9wj7xf4l 쿠쥬 플리즈 까져줄레?

      @sihyunkim8960@sihyunkim8960 Жыл бұрын

    • ​@@user-ug9wj7xf4l 니 뇌가 그만한 가치가 있겠냐 싶다만..구독자가 4천명이 넘는데 안봐도 일베소굴일 듯

      @qualityoflife6654@qualityoflife6654 Жыл бұрын

    • @@user-ug9wj7xf4l 너는 부모님이 가정교육을 똑바로 안시킨듯...

      @user-ij5zb3wu7l@user-ij5zb3wu7l10 ай бұрын

    • ​@@user-ug9wj7xf4l 개인성 놈 엄마 아버지가 불쌍타

      @user-js5kx7ep8t@user-js5kx7ep8t2 ай бұрын

  • I love these videos. You don't use any music or frantic cuts, you just let the factory do the talking and use the subtitles as optional narration. I love how you explain the process and really hope you keep making these.

    @Sir_Uncle_Ned@Sir_Uncle_Ned Жыл бұрын

  • I saw samyang valves here in Philippines. We use in steam piping systems. Thanks for sharing. ❤

    @neiltaneo7308@neiltaneo73085 ай бұрын

  • 냉동장이 일했었던 사람으로서 정말 감명깊게 봤습니다 감사합니다

    @AlejandroKwak-ie5qs@AlejandroKwak-ie5qs5 ай бұрын

  • Thanks for sharing this video. It needs lot of hard work to make a valve. Next time I wont complain for price. 😊

    @calsandy4u@calsandy4u7 ай бұрын

  • We used to complain about the prices of these things. But now that I've seen the entire process and seeing all those old mechanics at work makes me feel much better about the pricing. Thanks for making this!

    @jooch_exe@jooch_exe Жыл бұрын

  • "Our buddies in the north would rather make big missiles than big valves" Quote of the week. Very informative video. Thanks!

    @leosarrade8995@leosarrade89959 ай бұрын

  • Excellent video again. The top part of a mold is called the cope. And the lower part is the drag.

    @jlinkels@jlinkels Жыл бұрын

    • Thanks for watching and sharing what you know!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Thanks for another great "how it's made"! About coolant. It's usually water emulsion (mix of water and water soluble oil in correct proportions). And with cast iron it's used not just to cool tools and workpiece down, but to wash away cast iron dust that's generated in huge quantities. Because otherwise cast iron dust is a great abrasive and will start getting everywhere in the CNC machine, the ways, the bearings, etc, and to prevent that, the coolant is a must when working with cast iron.

    @phillevchenko1156@phillevchenko1156 Жыл бұрын

    • What a great knowledge you’ve got! Thanks for sharing!

      @Factory_Monster@Factory_Monster Жыл бұрын

    • somewhere in there they said it was cast steel. different material...or that may have been in error. At 11:38 it appears to be coming off in chips, not granules like cast iron does.

      @AffordBindEquipment@AffordBindEquipment Жыл бұрын

    • @@AffordBindEquipment I mean, it might be cast steel, but cast iron also generates quite a bit of larger chips when drilling with a good feed rate. There was a lot of powder on surfacing operation before drilling, at least it seemed like that.

      @phillevchenko1156@phillevchenko1156 Жыл бұрын

    • @@AffordBindEquipment they definitely melted scrap steeland added something to make it stronger for different valve to the one shown being machined.

      @rosewhite---@rosewhite--- Жыл бұрын

    • Cast iron dust isn't that bad. Coolant mix is a chemical mix. Not always used depends on the operation. This does look like steel though

      @williamofhler5613@williamofhler5613 Жыл бұрын

  • I liked the entire process of manufacturing the valves, as safely as possible, obeying the rules, which resulted in a beautiful product. Congratulations to the entire team of workers.🙂👍🇧🇷

    @marcelocruz12@marcelocruz12 Жыл бұрын

  • '엄청난 압력을 버티는 산업용 밸브가 만들어지는 과정. 62년 역사의 한국 주조 밸브 공장' 와 대단합니다. 한국에 이렇게 훌륭한 공장이 있다는 걸 영상 보고 알았습니다. 우리 한국에도 100년 기업이 나오겠군요. 삼양 밸브 파이팅입니다. '팩토리몬' 님 덕분에 자랑스러운 기업의 밸브 만드는 과정 보고서 무척이나 큰 자부심이 생기네요. 감사합니다. 주말 행복하게 보내세요. 💕

    @dongkeunkwak@dongkeunkwak Жыл бұрын

  • Спасибо работникам завода и автору канала за съёмки.

    @user-db9vq6iy6i@user-db9vq6iy6i Жыл бұрын

  • 자막도 센스있게 잘넣으셔서 재밌게 봤습니다. 공정이 세세하게 잘나와서 유익하네요😊

    @luxion80@luxion80 Жыл бұрын

    • 재미있게 봐주셔서 감사합니다!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 힘들일을 하시느라 너무 고생많네요..감사합니다!!

    @ssss-ou4bn@ssss-ou4bn Жыл бұрын

  • I appreciate this. I just had to have one of the backflow valves in my buildings fire sprinkler system replaced. It was a custom part as no more of the original existed. Knowing what goes in to simply the production humbles me. All this takes place after the design takes place. This is production scale. The fact our one-off was done in three months from designs is amazing. This was insightful.

    @carguybikeguy@carguybikeguy Жыл бұрын

  • Некоторые моменты обработки металла не показали. Хотелось бы посмотреть как обрабатывают внутреннюю полость.

    @groum3806@groum3806 Жыл бұрын

    • Это было бы самое вкусное в этом видео 😉 Реально, не могу найти, в сети, внутренней обработки таких вещей...

      @vintiknsr@vintiknsr Жыл бұрын

    • Может быть это ноу-хау? Автору пошли навстречу, замедлили обработку фланца без охлаждайки, рискуя фрезой некопеечной.

      @maksdn@maksdn Жыл бұрын

  • Saudações do Brasil SP. Trabalhei 20 anos na indústria de válvulas HITER/CROSBY/TAYCO FLOW CONTROL, Petrobras e Usinas de açúcar e álcool sao os principais clientes destes produtos. Parabéns ❤

    @cjmq6307@cjmq630713 күн бұрын

  • Thank you so much for excellent videos with no annoying background music.

    @Brandon_SoMD@Brandon_SoMD Жыл бұрын

    • Thanks for watching!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Thanks! I'm familiar with samyang optics for my Canon camera lenses! I didn't know they made valves! Thanks for another winner, great subtitles as always ❤️

    @ADF_Cable@ADF_Cable Жыл бұрын

    • Thanks for watching!

      @Factory_Monster@Factory_Monster Жыл бұрын

    • In KOrea Samyang is same as Smith in America!

      @rosewhite---@rosewhite--- Жыл бұрын

    • They don’t ;)

      @stupidhead9117@stupidhead9117 Жыл бұрын

  • 주조도 멋있지만 초대형기계로 정밀 가공하는거도 멋지네요

    @qudcjf1213@qudcjf1213 Жыл бұрын

    • 그쵸그쵸

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 자동화 설비부터 재료까지 진짜 인간의 기술력에 감탄하게 됩니다.

    @TaGed7891@TaGed78918 ай бұрын

  • That was phenomenal ! Never seen such casting !

    @nikroth@nikroth Жыл бұрын

    • Thanks for watching ;)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 연마할때 변형안나도록 물이 아니라 압연유를 뿌리는거겠죠.... 그리고 볼트너트 조일때 살짝 쪼여놓고 토크랜치로 전부 일정하게 조이는지 궁금했는데 그건 안나왔네요.

    @user-if1xp1fs5f@user-if1xp1fs5f Жыл бұрын

  • Very cool! Getting the pattern made is a whole other part that it doesn't show (after valve design of course). I used to design patterns for this type of casting beginning with the 3d model (sometimes 2d drawings). It was actually very rewarding work designing the pattern and coreboxes. You have to consider how many you can fit on one pattern, account for shrinkage, use software to see how it will solidify when cooling, add coreprint for the core to sit in, apply the rigging and risers, add macbhine stock, and add draft so that the pattern will pull from the sand. Then the pattern is CNC machined out of a polyurethane material called Renshape. After machining, the patternmakers can apply the antishifts, sand down any machining lines, fill any holes that it was screwed to the wood for machining, and a lot more. After painting and sending to the foundry, we would get them back and machine them as you see here. Careful consideration can be needed to rig correctly during machining. I miss this work!

    @ryanjavier9509@ryanjavier9509 Жыл бұрын

  • The valve you showed being assembled was actually a pressure regulator. Steps down the pressure, to prevent damage to lower-pressure components (you normally have one in your house, keeps your sinks from dripping)

    @patrickvolk7031@patrickvolk7031 Жыл бұрын

    • Not that size though xD

      @niklas.seyfarth@niklas.seyfarth8 ай бұрын

  • i really love your videos. sound, brilliant cinematography and shot composition. phenomenally good.

    @tristanbergh8655@tristanbergh8655 Жыл бұрын

    • Composition? How so? Or did you say that just so you can use the word?

      @stupidhead9117@stupidhead9117 Жыл бұрын

  • From Iraq Greetings to the Korean industry

    @wadhjj6921@wadhjj69217 ай бұрын

  • Awesome explanations...which made the video much more interesting and educational. An example of how to do this type of video. Excellent!

    @HyperSpaceProphet@HyperSpaceProphet Жыл бұрын

  • Truly fascinating, Every frame of this video. Didn't realize I wanted to know how these are made, until I saw your video.

    @outstanding1448@outstanding1448 Жыл бұрын

    • Glad You enjoyed my video!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 다큐로 알고 왔는데 자막 킹받네 너무 좋잖아 ㅎ 그리고 맨날 인도것만 보다가 이거보나까 체계적입니다 ㅋ

    @heavy2119@heavy2119 Жыл бұрын

    • 좋게 봐주셔서 감사합니다 :)

      @Factory_Monster@Factory_Monster Жыл бұрын

    • @@Factory_Monster 댓글이 달릴줄 몰랏습니다 그리고 여기서 일하고 계시는 모든분들은 과거에서부터 현재까지 대한민국 경재를 살리신 분들입니다 존경합니다 영상 이쁘게 잘 찍어주셔서 감사합니다

      @heavy2119@heavy2119 Жыл бұрын

  • 같은 밸브 업체에서 일하다 보니. 감회가 새롭네요. 도장이 분체도장이 아니어서. 조금 놀랐습니다.

    @kimyoung133@kimyoung133 Жыл бұрын

  • Nice job!!!. Congratulations!!! From El Salvador, C.A.

    @MauricioalbertoPinedacas-zu7bk@MauricioalbertoPinedacas-zu7bk8 ай бұрын

  • 많은 영감과 선한 자극을 얻어가는 영상들 입니다 감사합니다

    @atdawnsunset@atdawnsunset Жыл бұрын

    • 좋게 봐주셔서 감사합니다 :)

      @Factory_Monster@Factory_Monster Жыл бұрын

    • 좋게 봐주셔서 감사합니다 :)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Really great job, this result coming from the long term experience 62 years.. Staff is excellent. Keeping the job quality at same level since long time ago.. Many thanks and respects. Aladdin,, Iraq

    @alazubaidi6263@alazubaidi6263 Жыл бұрын

  • 아파트 설비공사업체 공무로 근무했었는데, 삼양제품 가격이랑 신뢰성이 정말 좋다고 생각합니다. 6년째 근무하면서 불량제품도 한번 못봤고요. 현장옮겨도 특별한 사정이 없는 한 삼양밸브만 쓸 생각입니다.

    @sooo923@sooo923 Жыл бұрын

  • Serviço perfeito.

    @CarlosSilva-vh1sg@CarlosSilva-vh1sg Жыл бұрын

  • Спасибо за смешные титры (Не повторять дома , без воды) 🤣👍👌

    @jcb805@jcb805 Жыл бұрын

    • Кстати, в Северной Корее, думаю, производство таких задвижек тоже вполне освоили))

      @npistudent@npistudent Жыл бұрын

    • Не стесняйтесь покупать гигантский для вашего дома🤣😂

      @Pubvoice@Pubvoice Жыл бұрын

    • @@Pubvoice Я бы с удовольствием , НО не для дома , а для "врезки" в нефтепровод , хотя думаю мне не обязательно гигантский 🤣🤗🤣

      @jcb805@jcb805 Жыл бұрын

  • I didn't know that valves and pipes are bumpy because they use sand molds. Very interesting!

    @PatrickZysk@PatrickZysk Жыл бұрын

  • the paint shop has what we simply call a "water wall" but is not legal in my country any more, its so you don't have to continuously change filter mediums. we used to have a vehicle spray booth with water instead of filters as it catches all dust and overspray. disposing of the water became very expensive and was shortly after banned nation wide

    @jasonstalder5208@jasonstalder5208 Жыл бұрын

  • Dont worry no torque wrenches were hurt in the making of this video. My favorite line "we"ll skip those test time is gold". Thanks for making making the video to help remind me of risk of buying from China.

    @fric8489@fric84896 ай бұрын

  • Great video as usual keep it up mate!! Love the work

    @poodlecow6525@poodlecow6525 Жыл бұрын

    • Thank you so much for watching my videos as always ")

      @Factory_Monster@Factory_Monster Жыл бұрын

  • This was awesome to watch - Thank You for sharing!

    @mlb6d9@mlb6d9 Жыл бұрын

    • Glad you enjoyed it!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 유익하네요 벨브가 만들어지는 과정을 쉽게 이해할수 있네요

    @hantagoja@hantagoja Жыл бұрын

  • 정말 많은 도움이 되는 컨텐츠네요~ 감사합니다.

    @user-rl8jx2oe6u@user-rl8jx2oe6u Жыл бұрын

    • 좋게 봐주셔서 감사합니다 :)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Finally a very informative (and funny as well) video about casting! Thank you so much

    @precesco@precesco Жыл бұрын

    • Glad it was helpful!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 삼양밸브는 만드는 우리나라 기술자들 스킬에 놀라서 찾아봤는데 한개에 200만원은 할 줄 알았는데 3~40 이라서 가격보고 한번 더 놀랐네. 진짜 이런 중요부품 사업장에 정부지원 많이 해줘야 하는데

    @corppor285@corppor285 Жыл бұрын

    • 저게 200이면 해외업체들이랑 가격경쟁력에서 상대가 안됩니다. 그리고 200이 누구집 개이름인가요? 최저임금으로 한달은 일해도 못버는 돈인데.

      @mokwabyLim@mokwabyLim Жыл бұрын

    • @@mokwabyLim 누가 200만원이 개이름이라고 했는지 아시는분? 이정도로 힘들고 수준 높은 기술이라서 200만원 값어치가 되야 한다고 그냥 말한거지 그리고 누가 중국산 싼지 모름? 쳐맞기 전까진 모른다지만 니 말투를 들어보니 200 못받는것도 이해가 간다. 키보드 워리워짓 하지말고 감사하면서 살자. 현으로 만나고 싶으면 서울 강남으로 와서 댓글 남겨주고.

      @corppor285@corppor285 Жыл бұрын

    • @@corppor285 ㄹㅇ 동감 ㅎㅎㅎㅎ

      @yejen1@yejen1 Жыл бұрын

    • @@yejen1 감사합니다.

      @corppor285@corppor285 Жыл бұрын

    • @@corppor285 그니까 저거 하나에 200할 정도면 누가 최저임금받고 한달일히냐. 저기가서 저거 하나만들면 되는데. 물가가 얼마나 씹창 나야 저게 200을 하냔 말인데. 이해를 못하고 왜 갑자기 급발진해서 비하를 쳐하지? 말 참 ㅈ가치 하네. 뭐 강남으로 와서 댓글을 남겨?ㅋㅋㅋㅋ. 현피운운하는거보니 수준 알만 하다

      @mokwabyLim@mokwabyLim Жыл бұрын

  • Amazing skills I'm so impressed with the magic sand and liquid they have they could make literally any kind of valve they want infinity sand is amazing 💫✝️✨

    @scottyelder8351@scottyelder8351 Жыл бұрын

  • Necesito la válvula grande para el grifo del baño. Quiero diez. 😂😂😂😂😂Muy bueno video. Muy interesante. Muchas gracias. Enhorabuena

    @joserobles9164@joserobles916410 ай бұрын

  • Wow we go through tons of these every month in my water treatment plant fabrication and installation company, didn't realise they were so time consuming to manufacture

    @liamobrien9451@liamobrien9451 Жыл бұрын

    • as in, you install tons of them? or tons of them break?

      @vice.nor.virtue@vice.nor.virtue Жыл бұрын

  • Great work ethics and tradition. Keep up the good work!

    @finchleyturner497@finchleyturner497 Жыл бұрын

  • its a nice video. we use small valves in our concrete block making machines too. I wondered how they are built.

    @concreteblockmakingmachine@concreteblockmakingmachine Жыл бұрын

  • Awesome as always

    @Klangtrieb@Klangtrieb Жыл бұрын

    • Thanks again!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Thank you for such a detailed process video!

    @NightwolfWitcher@NightwolfWitcher Жыл бұрын

  • Fantastic way to make valves. Very instructive video.

    @Nyck461@Nyck461 Жыл бұрын

  • Thanks very much for making video. Fitted lots of them sort of valves over the years and never seen them made. Thanks from Ireland

    @martinfanagan8374@martinfanagan8374 Жыл бұрын

  • Excellent video....hope you can show all the test at another video...keep making video like this

    @yoyoyaya823@yoyoyaya823 Жыл бұрын

    • Thanks for your comment :)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • The work of my....i am Vietnamese...buy my this is work in Japan...from 2008 years to 2011 years...i love it ...

    @donlbaytrump5864@donlbaytrump58644 ай бұрын

    • I also work in this process..

      @shankarchoudhary7735@shankarchoudhary77352 күн бұрын

    • In India

      @shankarchoudhary7735@shankarchoudhary77352 күн бұрын

  • Very interesting. Thanks for the informative captions and Thanks for sharing.

    @cohall46@cohall46 Жыл бұрын

    • Thanks for watching!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • I absolutely love the subtitles, as always.

    @chakrafusion@chakrafusion Жыл бұрын

    • I'm glad!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • You asked what kinda of system that is to wash away the dust generated during painting. It is what is called a downdraft dust extraction system in that the air is drawn downwards and I believe too it uses water to lessen any airborne particulates! Nice video!

    @robertmason8341@robertmason83419 ай бұрын

  • 14:00 이때 아예 통채로 물속에 담궈서 확인하지 않은 이유가 뭔가요?

    @JHoonSeo@JHoonSeo Жыл бұрын

    • 압 넣은 상태로 물 속에 담구기가 힘들어서? 옆에 압 넣어주는 기계까지 같이 잠겨야 되니까 그런걸까

      @JHoonSeo@JHoonSeo Жыл бұрын

    • 통째로 담궈서 확인하면 시간도 오래걸리고 설비도 매우 비싸질거고 물속 압력이 있기때문에 오히려 정확하지 않습니다.

      @user-yq5qu8ut4v@user-yq5qu8ut4v Жыл бұрын

  • I noticed on assembly of that brass inner part they used loctite 262 red👍👍👍👍👍, loctite keeps the world from coming apart 👍👍

    @MrMopar413@MrMopar413 Жыл бұрын

  • Another very interesting video. Thank you for taking the time to make and upload :0)

    @dejavu7031@dejavu7031 Жыл бұрын

    • Glad you enjoyed it!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • The captions are the best of any video I’ve seen! Great work

    @trevorreeves3553@trevorreeves3553 Жыл бұрын

  • Anda benar² hebat super power kerja berat.. salut sama anda.. lanjutkan..

    @KIDSTINTIN@KIDSTINTIN Жыл бұрын

  • 14:56, 15:13 - looks like a relief bypass (or whatever they call it in English) - AFAIK before you are to close the valve completely, you open the valve on the bypass in order to reduce the force on the main valve - and once you close the main one, you close the small one on the bypass. At least that was what they told us back then in secondary school ("high school "in US).

    @MrKotBonifacy@MrKotBonifacy Жыл бұрын

    • Yes, when there is unequal pressure on the downstream side it can cause uneven pressure on the valve making it hard to open\close and causing wear. The smaller valve is easier to open so you can equalize the pressure on both sides

      @bryanhemi4122@bryanhemi4122 Жыл бұрын

  • There are no words but there are captions. The captions are hilarious.

    @calmthesoul834@calmthesoul834 Жыл бұрын

    • You don't optimize the taste of your steel melt? How dare you 😂

      @bavarianmonkey8326@bavarianmonkey83263 ай бұрын

  • São peças de alta qualidade está de parabéns essa fábrica

    @rosimilsonfelixdossantos6981@rosimilsonfelixdossantos6981 Жыл бұрын

  • Jawa Tengah, Indonesia on.... Succes for "monster... "

    @mbahcarrier1629@mbahcarrier16295 ай бұрын

  • 멋진 영상이네요. 고생하시는분들 존경스럽습니다.

    @lxxxivy5@lxxxivy5 Жыл бұрын

  • Gray ones are used for heated applications.. like steam and gases or something. I'm not much sure of the same. However beautifully explained. Nice video

    @nbaua3454@nbaua3454 Жыл бұрын

    • Thanks for your comment!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • magnifique, je me suis vraiment apprécié votre travail, bon courage

    @hammatarek8703@hammatarek87035 ай бұрын

  • Ахуительно! Смотрел на одном дыхании. По памяти скажу, что большой это угловой клапан, а маленький - это шиберная задвижка, вроде. Мембрана меня спутала.

    @user-zr9sd1on1h@user-zr9sd1on1h6 ай бұрын

  • Oh, i understand why do you explaining which exactly Korea you're from ) I am from Ukraine and in conversations with locals during last business trip i had to explain why it is not the same as russia. Thank you for video, your subs are still cool :3

    @ua_serhii@ua_serhii Жыл бұрын

    • Thanks!

      @Factory_Monster@Factory_Monster Жыл бұрын

    • Another excellent FM video! Go Ukraine (and South Korea!)🏴‍☠

      @fredinit@fredinit Жыл бұрын

  • Красиво работают !!!

    @sergejusvasiljevas6943@sergejusvasiljevas6943 Жыл бұрын

  • the subtitles get me all the time "the buddies in the north would make giant missiles instead of giant valves " hahaha

    @FeelXable@FeelXable Жыл бұрын

  • Love your videos and your captions!

    @SlamDuncan888@SlamDuncan888 Жыл бұрын

    • Glad you enjoyed my caption :)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Beautiful work

    @sashamirzayans8465@sashamirzayans8465 Жыл бұрын

    • Beautiful comment :)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • Nice work. I spent many years making valves of cast iron, steel, stainless steel for all sorts of oil, gas, pipelines... the last valve I worked on was for a refinery and had to work at 700 pounds pressure.

    @rosewhite---@rosewhite--- Жыл бұрын

    • What Is the brown coating painting over pattern,. Thanks for your answer

      @oscorp641@oscorp641 Жыл бұрын

    • @@oscorp641 Just a thick ordinary paint to fill and smooth the pattern so it can be removed easily. In UK they tend to use a red paint like red oxide. Patterns have to be lightweight enough to be lifted easily so they are made of lightweight pine or similar softwood. But that wood has a very open grain that could cause the pattern sand to penetrate and stick to damage the sand when the pattern is removed.

      @rosewhite---@rosewhite--- Жыл бұрын

    • I want to know basics of valves manufacturing and its test details , Can you please help me

      @shilparani8299@shilparani82997 ай бұрын

    • @@shilparani8299 Lots of KZheads about machining valves and pressure testing them. So many kinds of valves so it's hard to be specific. Wedge gate, ball, flap etc etc. Small ones are made on cnc machines, bigger ones may be made on a vertical turret lathe or horizontal borer.

      @rosewhite---@rosewhite---7 ай бұрын

  • Industrial valves are made like this. It looks amazing, difficult, dangerous, and amazing. look good and go

    @KOKO-BOY@KOKO-BOY Жыл бұрын

  • I was wondering what was that special sand made from? I want to know, how that guy can lift that mold without breaking it.

    @anubis4356@anubis4356 Жыл бұрын

  • Thanks!

    @airbus7808@airbus7808 Жыл бұрын

    • Welcome!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • You should’ve shot your video at Masoneilan, in the US. Outstanding valves, been manufacturing them for decades. As far as the actuators that open/close these valves, REXA makes some of the best.

    @jeffgee6319@jeffgee6319 Жыл бұрын

    • He should go all the way to Burgerland because you’re aware of another company that makes valves?

      @stupidhead9117@stupidhead9117 Жыл бұрын

    • It doesn’t get any better than that using the same process. The only improvement That exists would be to do some of the castings using Kukas and whatnot to add some details, which they do in Germany for engine blocks

      @xl000@xl000 Жыл бұрын

  • Love the humor in these videos :)

    @simonpedersen4432@simonpedersen4432 Жыл бұрын

    • Glad you like them:)

      @Factory_Monster@Factory_Monster Жыл бұрын

  • 붕어빵 젤맛있는부분 ㅋㅋㅋㅋ편집자님 덕분에 재밌게 봤어요

    @user-cc1tg7jn7v@user-cc1tg7jn7v8 ай бұрын

  • 5:42 reminds me of the end of Terminator 2...🤣🤣 Great video, thanks for sharing!!

    @generaldisarray@generaldisarray Жыл бұрын

  • 밸브류는 가스켓 스파이럴 공정없이 나가나요..? 가스켓부분 도장도 되서 나가는거 같은데 ㄷㄷ

    @ChicName@ChicName Жыл бұрын

  • According to the sign at 16:07, grey may be for steam. Love the commentary in the captions.

    @turbo2ltr@turbo2ltr Жыл бұрын

  • Very good informative Video with no Music, thankfully. 👍👍👍

    @johnpartridge7623@johnpartridge762311 ай бұрын

  • Boa noite e show de tecnologia;parabéns a todos deste grupo e empresa e show...

    @augustooliveira3961@augustooliveira3961 Жыл бұрын

  • The gray color would be compressed gasses with color stripes added at installation to indicate the type of gas, there should also be yellow for hazardous chemicals.

    @azarellediaz4892@azarellediaz4892 Жыл бұрын

    • Thanks for sharing!

      @Factory_Monster@Factory_Monster Жыл бұрын

    • @@Factory_Monster I worked for ten years re-certifying and installing industrial valves of all types.

      @azarellediaz4892@azarellediaz4892 Жыл бұрын

  • Thia was so satisfying, especially that coating, chef kiss

    @SteveVi0lence@SteveVi0lence11 ай бұрын

  • ㅋㅋ 초월번역 맛있네요. 잘보고갑니당

    @sewoongpark6224@sewoongpark62249 ай бұрын

    • 감사합니다 😋

      @Factory_Monster@Factory_Monster9 ай бұрын

  • 삼양이 벨브도 만드는구나 ㄷㄷ 전기쟁이라서 감속기모터에 삼양메이커를 많이봐서 몰랐네용

    @Returns_B@Returns_B Жыл бұрын

  • 09:32 A Very Cool dust collecting system!

    @LordDustinDeWynd@LordDustinDeWynd Жыл бұрын

  • Very good video. Thanks!

    @stevem.8491@stevem.8491 Жыл бұрын

    • Very good comment :) Thanks for watching!

      @Factory_Monster@Factory_Monster Жыл бұрын

  • I loved the “buddies in North” comment! Made me laugh.

    @kaptainkaos1202@kaptainkaos1202 Жыл бұрын

  • Très intéressant. Merci !

    @levanle653@levanle653 Жыл бұрын
KZhead