@@arnasrinkevicius6075 7 Years ?!?..holy crap. I'll bet it was all worth it, when it was all done. I subscribe by the way.
@MOE135762 жыл бұрын
I like your product
@creativechannelpurna99793 ай бұрын
Muito top
@JOHNDOBRAPP Жыл бұрын
Any chance you could go into detail on your reverse off of the output shaft? That looks like a very slick way of doing it. Much appreciated.
@GrimmReaperRacing2 жыл бұрын
Hi, the sprockets nut has a ~100mm gear welded on. The starters plate is fixed in 3 points, takes two engine mount poits and one to the rear drive cartridge. Find me on facebook, will make you some photos.
@arnasrinkevicius60752 жыл бұрын
FULL ON COOOOOLLLL!!!!
@briant5396 Жыл бұрын
Классно! 5+
@Viktor-is6ot Жыл бұрын
What do these run?
@zachwilson7061 Жыл бұрын
Nice work, I usually want a motorbike design due to how one sits. When driving extreme the fear of spinal injury or damage from the sitting position is my concern.
@delventhiels4564 Жыл бұрын
Or drive within your skillset and within the limits of the vehicle , if you want engineering to keep you safe its probably time to consider whether you should or shouldn't driving . Its pretty specific injury so I don't know if you attempting to appear intelligent , because nobody in thier right mind would get in a vehicle and push the envelope of its handling without first exploring what it can and can't do , you wouldn't push the extremes like that , you only push the limits of anything once you have become familiar with said vehicle although I'd say that's universal law that applies to life in general . You would be fool and complacent otherwise surely ? .it's how experienced skilled drivers get killed they believe that thier skillset will over come any equipment limitation in the moment believing that the reason they are still alive is because they are great and when great drivers and risk takers number is up .when it can be avoided .
@ThomasDoubting5 Жыл бұрын
@@ThomasDoubting5 you are inexperienced and fd in the head! Most injuries go oops!, and some style of happening. A dirt bike has over ten inches of suspension and is designed for bumps and jumps. Routine jarring of the spine will add up!!!!! Regardless of the amount of suspension. There’s statistics over this and a body can only take so much. Regardless of experience oops and the unpredictable is always there. Even driving down the highway in a normal car rules against you in statistics and happenings. Now fun is fun until it changes. There’s endless crash data to say it’s unavoidable. Either way think what you want, I prefer dirt bikes.
@delventhiels4564 Жыл бұрын
Is it possibel to build it to the R model? Because the R model is narrower about 20 cm (182 cm), what would give that Car more useabilitiy on different Tracks and trails.
@all_out_of_bubble_gum Жыл бұрын
Don't know the exact dimensions of the R model, but I think the wishbones are the same.
@arnasrinkevicius6075 Жыл бұрын
How much total $$$ and how much work did you do yourself
@88SpeedJunkie2 жыл бұрын
Hi, I built it from Edge plans, made 99% by my self
@arnasrinkevicius60752 жыл бұрын
nice
@creativechannelpurna99793 ай бұрын
Beautiful. They're just unnaturally wide.
@slipperyslope3912 Жыл бұрын
Thank you! Yes, close to two meters on compressed suspension!
@arnasrinkevicius6075 Жыл бұрын
Nice 👍🤗🇱🇻
@ivoozollapins5264 Жыл бұрын
Is this MK2 ? Did you already use more reliable parts, to prevent flying off wheels ?
@all_out_of_bubble_gum Жыл бұрын
It is MK1 with all of the upgrades of mk2, the hubs are still two peace but the bolts that use to shear changed to different type.
@arnasrinkevicius6075 Жыл бұрын
@@arnasrinkevicius6075 Would by it If there could be a street approvel in Germany. Great Work
@all_out_of_bubble_gum Жыл бұрын
@@all_out_of_bubble_gum I know few barracudas made street legal in Germany, the paper work costs about 1.5k and this buggy has all the wiring and switches, you just need to hook up the turn signals and lights ;)
@arnasrinkevicius6075 Жыл бұрын
@@arnasrinkevicius6075 yes that WAS rigt. The approvel is called LOF in Germany and until Last year was NO Problem. But since 2022 laws has changed and it is totaly Impossible NOW to get those Kind of vehicle legal here. Maybe in Poland still. Trying approve it in Poland and use in Germany with polish plates. But that is a Grey Zone and Bit illegal. If this was 2021 I would buy it from you without doubts
@all_out_of_bubble_gum Жыл бұрын
@@all_out_of_bubble_gum UK is still a kit cars paradise :) There is a company in Lithuania that helps to register it in UK for 1000Eur. All of the home made cars in LT was registered this way. They change plates to LT plates after that. If you would be interested, we can continue the discussion privately.
@arnasrinkevicius6075 Жыл бұрын
Sick I wouldn’t change a thing…..
@smokeandmirrors482 Жыл бұрын
🌿
@dibujosmal_6937 Жыл бұрын
Hello, what is the top Speed of the Buggy?
@lukaslp3965 Жыл бұрын
I have never reached the limit, but as far as I remember the calculations with the current setup was 170+ km/h @ 10.5k rpm. It has the slowest gearing as you can get: 13t front and 60t back.
@arnasrinkevicius6075 Жыл бұрын
This is the one featured on the product page. Something I’ve been wanting for more than 10 years. The website says sold out and special order only. I only hope I haven’t missed the opportunity.
@headfirst6227 Жыл бұрын
Hi, yes it is, and it is for sale!
@arnasrinkevicius6075 Жыл бұрын
@@arnasrinkevicius6075 can you post the details? Hours used or miles driven, what engine it has, how much you want for it, etc…. Fresh pictures of it too please .
@headfirst6227 Жыл бұрын
@@headfirst6227 Contact me on facefook (by name)
@arnasrinkevicius6075 Жыл бұрын
@@arnasrinkevicius6075 how about start with posting a price tag here? That way I can know if I want to pursue it.
@headfirst6227 Жыл бұрын
@@headfirst6227 Here is the link to the add suchen.mobile.de/fahrzeuge/details.html?id=325540694 The price is 16,5k euro.
@arnasrinkevicius6075 Жыл бұрын
How much was the total build price?
@Carti_Boi Жыл бұрын
It is hard to calculate but it is for sale for 16.500 euro
@arnasrinkevicius6075 Жыл бұрын
Many?
@fifaworkout76532 жыл бұрын
The exhaust should be lowered man its going to over heat the suspension
@yousafyousaf-ib9qn Жыл бұрын
Don't know what gets hotter shocks or the silencer :) but no problem there, both shocks are same temperature and plus shock goes away as suspension compress.
Beautiful!
I love EDGE buggys i have their Hypersprint.
Nice buggy 😊
One of the nicest barracudas I've seen.
Thanks! It took just 7 years to build :D
@@arnasrinkevicius6075 7 Years ?!?..holy crap. I'll bet it was all worth it, when it was all done. I subscribe by the way.
I like your product
Muito top
Any chance you could go into detail on your reverse off of the output shaft? That looks like a very slick way of doing it. Much appreciated.
Hi, the sprockets nut has a ~100mm gear welded on. The starters plate is fixed in 3 points, takes two engine mount poits and one to the rear drive cartridge. Find me on facebook, will make you some photos.
FULL ON COOOOOLLLL!!!!
Классно! 5+
What do these run?
Nice work, I usually want a motorbike design due to how one sits. When driving extreme the fear of spinal injury or damage from the sitting position is my concern.
Or drive within your skillset and within the limits of the vehicle , if you want engineering to keep you safe its probably time to consider whether you should or shouldn't driving . Its pretty specific injury so I don't know if you attempting to appear intelligent , because nobody in thier right mind would get in a vehicle and push the envelope of its handling without first exploring what it can and can't do , you wouldn't push the extremes like that , you only push the limits of anything once you have become familiar with said vehicle although I'd say that's universal law that applies to life in general . You would be fool and complacent otherwise surely ? .it's how experienced skilled drivers get killed they believe that thier skillset will over come any equipment limitation in the moment believing that the reason they are still alive is because they are great and when great drivers and risk takers number is up .when it can be avoided .
@@ThomasDoubting5 you are inexperienced and fd in the head! Most injuries go oops!, and some style of happening. A dirt bike has over ten inches of suspension and is designed for bumps and jumps. Routine jarring of the spine will add up!!!!! Regardless of the amount of suspension. There’s statistics over this and a body can only take so much. Regardless of experience oops and the unpredictable is always there. Even driving down the highway in a normal car rules against you in statistics and happenings. Now fun is fun until it changes. There’s endless crash data to say it’s unavoidable. Either way think what you want, I prefer dirt bikes.
Is it possibel to build it to the R model? Because the R model is narrower about 20 cm (182 cm), what would give that Car more useabilitiy on different Tracks and trails.
Don't know the exact dimensions of the R model, but I think the wishbones are the same.
How much total $$$ and how much work did you do yourself
Hi, I built it from Edge plans, made 99% by my self
nice
Beautiful. They're just unnaturally wide.
Thank you! Yes, close to two meters on compressed suspension!
Nice 👍🤗🇱🇻
Is this MK2 ? Did you already use more reliable parts, to prevent flying off wheels ?
It is MK1 with all of the upgrades of mk2, the hubs are still two peace but the bolts that use to shear changed to different type.
@@arnasrinkevicius6075 Would by it If there could be a street approvel in Germany. Great Work
@@all_out_of_bubble_gum I know few barracudas made street legal in Germany, the paper work costs about 1.5k and this buggy has all the wiring and switches, you just need to hook up the turn signals and lights ;)
@@arnasrinkevicius6075 yes that WAS rigt. The approvel is called LOF in Germany and until Last year was NO Problem. But since 2022 laws has changed and it is totaly Impossible NOW to get those Kind of vehicle legal here. Maybe in Poland still. Trying approve it in Poland and use in Germany with polish plates. But that is a Grey Zone and Bit illegal. If this was 2021 I would buy it from you without doubts
@@all_out_of_bubble_gum UK is still a kit cars paradise :) There is a company in Lithuania that helps to register it in UK for 1000Eur. All of the home made cars in LT was registered this way. They change plates to LT plates after that. If you would be interested, we can continue the discussion privately.
Sick I wouldn’t change a thing…..
🌿
Hello, what is the top Speed of the Buggy?
I have never reached the limit, but as far as I remember the calculations with the current setup was 170+ km/h @ 10.5k rpm. It has the slowest gearing as you can get: 13t front and 60t back.
This is the one featured on the product page. Something I’ve been wanting for more than 10 years. The website says sold out and special order only. I only hope I haven’t missed the opportunity.
Hi, yes it is, and it is for sale!
@@arnasrinkevicius6075 can you post the details? Hours used or miles driven, what engine it has, how much you want for it, etc…. Fresh pictures of it too please .
@@headfirst6227 Contact me on facefook (by name)
@@arnasrinkevicius6075 how about start with posting a price tag here? That way I can know if I want to pursue it.
@@headfirst6227 Here is the link to the add suchen.mobile.de/fahrzeuge/details.html?id=325540694 The price is 16,5k euro.
How much was the total build price?
It is hard to calculate but it is for sale for 16.500 euro
Many?
The exhaust should be lowered man its going to over heat the suspension
Don't know what gets hotter shocks or the silencer :) but no problem there, both shocks are same temperature and plus shock goes away as suspension compress.
Nice
Thank you!