Saker Silicone 3 in1 Caulking Tool.

Thanks for the refresher on this caulking tool but this caulking job looks like a hot mess

Thank you for showing us how to set up the tools but the caulk application is a mess. 😋😝

Thank you so much!!! You gave excellent instructions. I am now able to do this easily. ⭐️

Thanks for your review. After seeing it, it does not seem it will serve purpose to remove caulk around my bathtub. Those tools all work great, when the installer did the job right and put a thick bead of silicone on top of a generous gap between two surfaces. If it was not done right, that is why you have to go back and fix it, and will find that all those caulk and grout tools that will work for a proper installation, will not work when up against a bad install. In my case, they left a very fine gap between tile and tub. The grout saw did not work, the gap was too small. Not able to really scrape out the cracked grout to clean it up. The silicone caulk was also a very thin/flat layer, in which renders that tool useless as shown at the end of the video. The silicone layer is flat and the tool needs enough of a caulk bead radius to pick up on. A good install should not have the gap between the bottom of tiles to the top of tub not filled with grout, only filler silicone or sand caulk. It's not the tool that is bad, it is the installer!

Thank you for demonstrating. I am trying to remove old caulk from a shower door. I took the shower door off, but the caulk underneath the track is at least 50 years old and not budging. Do you have any ideas I can use with the tool to get it off maybe?

Looked promising but that plastic scraping edge is going to get destroyed (dented) very quickly. And the metal scraping tool could scrape stone materials (granite, etc). I like the 5 different tooling/shaping heads but since they are either a soft or rubberized plastic I can see them wearing out over time. Not convinced. Decent video.

Thank you sir ❤

I would have like you to smooth a larger gap with one of the curved tips.

Thank you!

Rough as are you for real, and I've just ordered this 🙈

I take it that this thing wont remove old silicone from a plastic tub and surround .

U can just used a sponge and make it better

Such a waste to just wipe of the excess caulking on the tip of tool, could have used it on the other edges of the table that need caulking but seeing that calking beads at the end of tool allows you to use the excess if you over applied the caulk.

Watch the company one., Smart Saker. Trust me.

Silicon caulking tool lmao

Poly Dab works much better

someone bought this for me and i dont know who

You never showed us how to remove the old silicone with that tool and your demo was poor so I don't know if the tool or you are at fault here.

lol

This video is more likely to put people off buying this tool.

Sorry the whole point of a chalking tool is to make the job easy so why would you use painters tape? Not a very good video do one without the tape.

I definitely won't buy after watching this mess

These tools are all useless gimmicks.The primary reason to tool silicone is to improve adhesion. The secondary reason is aesthetics. These tips completely ignore the primary reason for tooling. They are all pathetic gimmicks that insure premature failure. All they do is scrape of the excess. TOTAL GARBAGE. I have been a professional caulker for over 45 years and this kind of crap is why homeowners are always having to replace sealant. All of the misinformation on sealants is totally disgusting. And causes homeowners untold amounts of dollars not even taking into account the hidden damage caused by leaks due to these ridiculous short cuts. You should be sued fir ndg

I hope you don’t make a living at this

Amateur hour with caulking

Looks terrible

What a mess!