few know how to accurately weld 0.7mm thin galvanized square pipe | welding trick
2023 ж. 29 Нау.
345 601 Рет қаралды
few know how to accurately weld 0.7mm thin galvanized square pipe | welding trick
few know how to accurately weld 0.7mm thin galvanized square pipe | welding trick
Try 1.6mm stick at 20Amp
you're probably right. That was my first thought.
The smallest I have available is 2mm so this was helpful for me
Thanks for sharing, another knowledge for me
very very very nice..im a beginner..this video helps me a lot
Gostei desse aprendizado.... é um pouco complicado soldar tubo de 2mm, mas com essas dicas fica melhor. Brazil
Muy claro el ejemplo de las cuatro técnicas
Quick touch and go. Give each burn a few seconds to cool. Build on the last deposition of electrode metal. I’m all in
Excellent
Know that sticking welding-rod and burn-through from more that 40 years ago! Solution? Might suggest a gasless-MIG would deal well with this thin material even in the hands of a relative beginner.
MIG welding is expensive and the gas is not available everywhere.
@@naumanahmadtariq8717He said gasless
I would like to but, buying a set of MIGs would cost me a lot of money.
I would like to but, buying a set of MIGs would cost me a lot of money. It's quite expensive here in the Philipines tho
Cheapest mig weldding is almost double the price of well known stick weld, and the gasles wire ain't readily available in most hardware stores, i really wan to buy it if those reasons not hold me back
Nice! Helpful, thanks!
thank you again, hopefully useful friend
ang laki nman nang sadakyan
Thank you for sharing
Thank you again friend, I hope it's useful
¿Eso fué con Polaridad Directa?
Çok açık layaci teşekkür
Very nice, thank you.
Can almost smell the zinc fumes in the video. How was the metal fume fever that night?
I saw a welder welding a bunch of galvanized without a respirator. He said it’s ok I’ll drink a lot of milk tonight. It binds the zinc. lol.
Tq, good sharing
lovely
Excellent work
큰도움이됩니다
Thank bro
Thanks again brother
Nice one
most hardware here do not sell 2mm..that is my problem
thats right very good
Best stick welding instructor on KZhead 👍helps me a lot with important tips and techniques
Good
Thank you friend
👍👍👍👍
Thanks
thanks again guys
Grind off the galvanise !!!!!
You nid to lowering the amp
Xem bước thứ 4 đúng nhưng tay nghề bạn còn hơi kém
Класс
Спасибо большое, профессионально показал. 👍🙏
Нижнее положение 40а хватит за глаза, точка ставится на следующей точке, можно и сплошным если выставить минимальный ток для электрода и вести быстрее а не жарить на всю. И второе на профиле стенка точно не 0.7.
Jangan buru2 bang ngasih tutorial😅 3:54
Forgot to make V groove before the start of weld.
Luar biasa bro
yes
❤❤❤
Tebal itu besinya bang
👍
NO, NO, N0. SMALLER ROD, LOWER AMPS.
Try 1.0mm stick at 10Amp 😂
Try 1.0mm stick at 10 amp❤
0.7= Fluxcore the best😅
Dangerous amateur stuff. Never weld galvanized steel without grinding off the zink plating properly. Poison.
Only someone who has never professionally welded galvanised house frames would make that statement.
Hahahaha😂😂😂😂😂
Auto Suscribe bang like tks sdh mampir di chanel sebelah. Keren
🤦♂️
큰도움이됩니다