KZhead
Тәжірибелік нұсқаулар және стиль

2 tips. For dealing with large gaps of stick welding square tube.

Weld D
2022 ж. 28 Сәу.
1 241 313 Рет қаралды
Жүктеу

2 tips. For dealing with large gaps of stick welding square tube.
new tricks learn welding easily.
stick welding square tubing
This video is how to weld metal thin square tube using stick weld, this video is made for beginner welders, how to weld for beginners
Hopefully inspiring and hopefully useful
Don't forget to subscribe!!
#howtoweldforbeginners #welding #welder #beginnerswelder #weldingsquaretube #weldingmachine
Tag :
stick welding tips and tricks
stick welding techniques
stick welding for beginners
stick welding 7018
stick welding stainless steel
stick welding thin metal
stick welding art
stick welding ac
stick welding amp settings
stick welding angle iron
stick welding asmr
stick welding aluminum boat
welding with a stick welder
stick welding a trailer
how to use a stick welding machine
how to set a stick welding machine
stick welding a gate
stick welding basics
stick welding body panels
stick welding basics for beginners
stick welding beginners
stick welding big gaps
stick welding brass
stick welding cast iron
stick welding compilation
stick welding cast iron with nickel rod
stick welding explained
stick welding expanded metal
stick welding example
stick welding equipment
stick welding fails
stick welding for beginners 6011
stick welding fabrication
stick welding flat plate
stick welding for beginners 6013
stick welding how to
stick welding hacks
stick welding how to strike an arc
stick welding harbor freight
stick welding helmet
stick welding machine
stick welding rods
stick welding rods explained
stick welding rusty metal
stick welding running a bead
stick welding sheet metal
stick welding square tubing
stick welding tips and tricks 7018
stick welding thick metal
stick welding tips and tricks 6010
stick welding with 7018
stick welding with 6011
stick welding weld.com
stick welding with 6010
stick welding with 6013
stick welding 1/8 steel
stick welding 1/8 square tubing
stick welding 2mm
stick welding 2mm steel
stick welding 6013
stick welding 6010 tips
stick welding 6011 settings
stick welding 6010 vertical
stick welding 6013 settings
stick welding 6013 vertical
stick welding 7018 1/8
stick welding 7018 uphill
stick welding 7018 padding beads
stick welding 7018 1/8 vertical
stick welding 7014
how to weld for beginners
how to weld for the first time
how to weld for dummies
how to weld for cheap
how to weld for beginners whistlindiesel
how to weld for beginners youtube
how to tig weld for beginners
how to weld arc for beginners
how to weld aluminum tig settings
how to weld with a stick welder for beginners
how to forge weld in a gas forge
how to stick weld for beginners
how to arc weld for beginners
how to weld cast iron with stick
how to weld car body parts
how to weld catalytic converter
how to weld downhill stick
how to weld downhill mig
how to weld dog cage
how to weld dual shield
how to weld different metals
how to weld disc brake mounts
how to weld door hinge
how to weld exhaust for beginners
how to weld exhaust pipe with stick welder
how to weld fuel tank
how to weld good
how to weld gold at home
how to weld gasless mig
how to weld gate hinges
how to weld gas tank
how to weld good beads
how to weld gas pipe
how to weld hinges on metal gate
harbor freight welder
how to weld horseshoes together
how to weld hdpe plastic
how to weld holes shut
how to weld hardened steel
how to weld hinges
how to weld hole
how to weld metal for beginners in tamil
how to weld metal for beginners in hindi
how to weld go kart frame
how to weld like a pro
how to weld lead
how to weld led strip
how to weld lithium batteries
how to weld lincoln electric
how to weld loops on fly line
how to weld leaf springs
how to weld laptop hinges
how to weld metal for beginners
how to weld metal for beginners mig
how to weld metal for beginners stick
how to weld exhaust pipe
how to weld stainless steel
how to weld cast iron
how to weld plastic
how to weld copper
how to weld with a wire feed welder
how to weld mig
how to weld better with stick
welding thin stainless steel
welding things
welding thin stainless steel with stick
welding thin stainless steel with mig
welding things to sell
welding things together
welding thin metals
welding thin stainless steel tig
stick welding square tubing
stick welding square tube steel
stick welding 1/8 square tubing
stick welding with lincoln square wave 200
welding thin cast iron
welding thin copper
welding rod for thin metal
arc welding for thin metal
welding thin pipe
welding thin plate
tig welding thin stainless pipe
welding thin wall tubing
how to weld cast iron with mig
how to weld cast iron with stick
how to weld exhaust manifold
e weld plasma
how to weld flux core
how to weld for the first time
how to weld fence
how to weld for dummies
beginners welder kit
beginner welder machine
beginner welder projects
beginner welder setup
best beginner welder
beginner tig welder
beginner mig welder
beginner stick welder
beginner welder
beginner welder tips
best beginner tig welder

Пікірлер

  • The best way to deal with large gaps is to fire your fitter.

    @darreneisner5162@darreneisner5162 Жыл бұрын

    • That's true

      @tulangdiyotvlogger6442@tulangdiyotvlogger64426 ай бұрын

    • Is that what they did to you

      @milekh6681@milekh66816 ай бұрын

    • So, it took you a year to come up with that zinger? You must be a fitter.🤣@@milekh6681

      @darreneisner5162@darreneisner51626 ай бұрын

    • Fire him? But I am him!

      @jonlewis5063@jonlewis50635 ай бұрын

    • 😂😂😂😂

      @user-sy6cq3un4f@user-sy6cq3un4f3 ай бұрын

  • You can weld large gaps by using les heat and welding in a u shape. Also "Tip 2" could be done continuously and also using a "U" shape going from one side to the other with a pause at the top of each side of the U. Amps need to be set correctly. Weld is stronger without the stop start welding.

    @madpete6438@madpete6438 Жыл бұрын

    • The U shape is what my supervisor told me in the Navy long ago. Thanks.

      @josephgriffin2388@josephgriffin2388 Жыл бұрын

    • ​@@josephgriffin2388you and @madpete can probably appreciate this. He's a practitioner of "Morse Code" welding. Listen to all those dots and dashes

      @cjsmith157@cjsmith1575 ай бұрын

    • That's the way I do it

      @GraniteRidge@GraniteRidge3 ай бұрын

  • A picture is worth a thousand words. Thank you.

    @mrmyorky5634@mrmyorky563422 күн бұрын

  • You are such a creative welder 👍

    @TV-io1cb@TV-io1cb9 ай бұрын

  • Muy buen video. La musiquita de la primera parte, insoportable.

    @martinmendoza9474@martinmendoza9474 Жыл бұрын

  • Thanks for the tutorial

    @ratgasgarage@ratgasgarage Жыл бұрын

  • New subscriber from Manipur 👍

    @Gyn_Lhungdim@Gyn_Lhungdim Жыл бұрын

  • For straight line gaps the second solution is the best approach but not all gaps are in a straight line so the first approach is very appropriate.

    @irishguy200007@irishguy200007 Жыл бұрын

  • Excelente gracias

    @yorvenitsolano3453@yorvenitsolano3453 Жыл бұрын

  • Master welders 👍

    @tukanglaslahat@tukanglaslahat Жыл бұрын

  • God willing, you have tricks to deal with iron problems and solve them. You will make me crazy with your high skill

    @user-wj3ci4bp6w@user-wj3ci4bp6w11 ай бұрын

  • TIPS 2 .. MUY BIEN

    @vidapayewelder@vidapayewelder Жыл бұрын

  • Parabéns Boas dicas

    @cezarromeucastilho4799@cezarromeucastilho4799 Жыл бұрын

  • tk kemas lagi cara menganyam guys.. betul sudah caranya .. anyaman tk kemass 🥰🥰

    @rasiljaafar1981@rasiljaafar1981 Жыл бұрын

  • It's amazing to learn how to weld

    @user-nm1bd6co4u@user-nm1bd6co4u8 ай бұрын

    • 🙏🙏👨‍🏭

      @weld_d@weld_d8 ай бұрын

  • Mantap kak bisa berbagi ilmunya nih kak

    @epenbawellechannel@epenbawellechannel Жыл бұрын

  • Greetings, thank you for your training and good solutions. In this case, the welding seam between 2 workpieces is too open, your first solution is correct, and this defect should be fixed by edging, because in the industry, In such cases, the welder is not allowed to use rebar or wire, etc., even if the welder has a lot of skill, and because after welding, all kinds of defects will appear in our weld, or the wire or belt may have a metal that is not the same as the piece. Work and electrode

    @ashkansherafatifard9167@ashkansherafatifard9167 Жыл бұрын

  • Mantap kak bisa dibagi ilmunya nih

    @epenbawellechannel@epenbawellechannel Жыл бұрын

  • Подобным методом такой зазор варится за один проход, причём без отрыва.

    @user-wf9ms9hj3q@user-wf9ms9hj3q Жыл бұрын

    • При чем тут и дефектов дохерища(поры, не сплавления и т.д.)

      @user-dm2yr4ie2v@user-dm2yr4ie2v Жыл бұрын

  • Ok trims atas tutorial nya.... 👍🙏

    @gunturrama5331@gunturrama5331 Жыл бұрын

  • You are more than amazing ❤

    @user-wj3ci4bp6w@user-wj3ci4bp6w11 ай бұрын

  • ดูแล้วดูอีก ดูแล้วดูอีก ขอบคุณครับ

    @user-lz7fx6by7o@user-lz7fx6by7o Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • Sangat bermanfaat buat saya yg baru belajar.

    @bangjiunsandartriharyadi@bangjiunsandartriharyadi Жыл бұрын

  • Al momento en que escribo mi opinión ya leí las críticas de los expertos y ésta manera de soldar yo la usaré cuando la Unión no esté sujeta a grandes cargas y esfuerzos , gracias por el vídeo ya que tiene un gran aporte y utilidad.

    @joeray088@joeray088 Жыл бұрын

  • Good job my friend.., 👏👍

    @WeldingActivity@WeldingActivity6 ай бұрын

  • First, I've been a welder for 30+ years and this gets me riled up., Step one, work on your fabrication skills. Step two, learn how to weld. Not a single weld on this video has any structural integrity. You can't just throw down a series of tacs and expect the "weld" to hold. Nowhere near enough heat to properly penetrate the base metal. This is just a click bait video. Now, let's hear the keyboard welders knock my assessment.

    @Mudracer41@Mudracer41 Жыл бұрын

    • I agree. Watching the stick welding using a tig welding technique and seeing all the bubbling porosity in that weld was wrong. Don’t use this technique!

      @mannymayer9250@mannymayer9250 Жыл бұрын

    • OK ....Knock knock....But your spot on !!! I would have filled that with on pass....But I'm a JIW Ironworker so criticizing wouldn't be fair, these guy's a learning. And that's a small gap to begin with. Measure twice cut once....They need to work on fit up

      @dingo397@dingo397 Жыл бұрын

    • Grow up sometimes this is what you have to do as long as it isn’t gasoline pipe or something like that it’s ok

      @coffeemaninsanity8596@coffeemaninsanity8596 Жыл бұрын

    • @@coffeemaninsanity8596 Really? This is ok? I'm afraid it's not ok. What if some bonehead, like for instance, you, watches this and copies what this guy did on, say, a trailer or hitch assembly or anything at all that has any kind of force applied to it? Shit flies apart at 65 mph and people get hurt or killed. Grow up? Son, I'm way grown and retiring in 13 months. I want to make it to enjoy my retirement, not be killed because some moron got a bunch of clicks on his youtube video and another moron followed his moronic advice.

      @Mudracer41@Mudracer41 Жыл бұрын

    • reducing criticism is much better to learn than your weld techniques bro🙃

      @spinach6650@spinach6650 Жыл бұрын

  • keep going bro believe in your capabilities and ability😉👌

    @spinach6650@spinach6650 Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • Good job man

    @anikmondal9388@anikmondal9388 Жыл бұрын

  • What is the second rod you're holding? Sorry I've just started learning..

    @dsaurabh13@dsaurabh132 ай бұрын

  • Ты просто гений!!! Неужели никто раньше об этом не догадался???

    @user-hp3yy4tu2q@user-hp3yy4tu2q Жыл бұрын

    • Они начинающие думают, что самые умные!))

      @Andrydok@Andrydok Жыл бұрын

    • У меня так же получается после второго стакана водяры на тощак .

      @borisboris7856@borisboris7856 Жыл бұрын

    • @@Andrydok Я бы даже сказал "Развивающиеся" :)))

      @user-hp3yy4tu2q@user-hp3yy4tu2q Жыл бұрын

  • Soy aficionado, sin ninguna experiencia y me parecen muy buenos consejos. gracias

    @arquitecturayconservacion560@arquitecturayconservacion5609 ай бұрын

    • Привет всем. Да я тоже сам до шол как можно сварить широкий зазор🙃🙂😉👋👍

      @user-sy6cq3un4f@user-sy6cq3un4f5 ай бұрын

  • La técnica de usar la varilla de relleno al soldar es muy eficiente yo siempre la uso

    @misaelperales4631@misaelperales4631 Жыл бұрын

  • Esa varilla es otro electrodo??

    @josearevalo5162@josearevalo51628 ай бұрын

  • ขอบคุณครับอาจารย์

    @user-ur5lu3pz3o@user-ur5lu3pz3o2 жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d2 жыл бұрын

  • thankyou for showing me im not the only one that half asses things, but i wouldnt call these tips

    @44slattery3@44slattery3 Жыл бұрын

  • wow , beautful work .

    @odilonmoreira9613@odilonmoreira9613 Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • thank you for inspiring me.. i also have the same channel

    @Darmawanseptyo@Darmawanseptyo Жыл бұрын

  • Good job brother! Sucessos!

    @hugocosta4635@hugocosta46355 ай бұрын

  • What a idea ❤❤❤

    @naresh9298@naresh9298 Жыл бұрын

  • 당신은 진심 고수입니다.. Good!

    @youngil808@youngil8087 ай бұрын

  • ❤😮 امنورين الغوالي بل التوفيق انشالله

    @user-ws9ym6ge6n@user-ws9ym6ge6n Жыл бұрын

  • Tip 2 good

    @rajuvanamadi7936@rajuvanamadi7936 Жыл бұрын

  • Mình ĐK kênh KZhead cho bạn rồi

    @Sonthasoctrang@Sonthasoctrang2 ай бұрын

  • Wow!!!!!!

    @sutatsinohydro-itd.jv.6876@sutatsinohydro-itd.jv.6876 Жыл бұрын

  • สอบถามครับ ลวดที่ใช้เติม นี่ใช่ตัวเดียวกับลวดเชื่อมรึเปล่าครับ

    @smgcc5014@smgcc50142 жыл бұрын

    • ใช่ครับ

      @weld_d@weld_d2 жыл бұрын

  • Dlatego najlepszymi spawaczami są Ci co szyją na maszynie do szycia,pzdr

    @67piotrek@67piotrek Жыл бұрын

  • Should’ve videoed through a dark lense

    @coffeemaninsanity8596@coffeemaninsanity8596 Жыл бұрын

  • Woooow Amazing

    @jujurituhebat7575@jujurituhebat7575 Жыл бұрын

  • Это можно и без присадки сделать

    @blindegerd6915@blindegerd6915 Жыл бұрын

  • Maybe give some video tips on proper fabrication instead of welding "tips"? But for real, us amateur garage welders use the "fill the gap" technique regularly, and it makes us feel like we are good welders.

    @garys5175@garys5175 Жыл бұрын

  • Насмотрелся на сварку перед сном)

    @user-zx3jk9eg6t@user-zx3jk9eg6t Жыл бұрын

  • Молодец, если, только так можно. Какая полярность? Владимир

    @vladimirpechniak8614@vladimirpechniak86149 ай бұрын

  • 헐 대박 감사합니다.🙏🙏

    @cloudasmr0.0@cloudasmr0.0 Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • สุดยอดมากครับ

    @billeezal@billeezal2 жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d2 жыл бұрын

  • Una pregunta! Mirando la luz de soldar por video puede afectar la vista? Tengo esa duda ase mucho.

    @Diego-nn8kg@Diego-nn8kg Жыл бұрын

    • Decrease the brightness in your device for safety.

      @shrutidecorofficial1873@shrutidecorofficial1873 Жыл бұрын

    • xd POR ESO VEO LA pc cON CASCO DE SOLDAR :V

      @darkstatmat4891@darkstatmat4891 Жыл бұрын

  • boss sa step two ano yon parehas rod?

    @rondeltindugan3725@rondeltindugan3725 Жыл бұрын

  • fcครับอาจารย์

    @Fanta9@Fanta92 жыл бұрын

    • 🙏🙏🙏😂😂

      @weld_d@weld_d2 жыл бұрын

  • Я бы попробовал добавочный электрод класть по диагонали. Как буду варить попробую.

    @user-ld6mf3nh9i@user-ld6mf3nh9i Жыл бұрын

  • It calls buttering, we need more WPS to do this method, when we met in thick material we also need to clean and make it like smooth.

    @kskchannelkerjasambilkeluy3749@kskchannelkerjasambilkeluy3749 Жыл бұрын

  • Gotta love that Mexican heliarc 😂😂

    @alanartola2250@alanartola22507 ай бұрын

  • Nice Music mon. Real nice

    @ccarl7833@ccarl7833 Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • A qué amperaje está soldado para poder aprender gracias soy de Ibagué Tolima Colombia

    @humbertoenciso1055@humbertoenciso1055 Жыл бұрын

    • ึ75-80 amp.

      @weld_d@weld_d Жыл бұрын

    • Сварочный ток зависит от напряжения в сети и от рабочего напряжения самого сварочного аппарата - 220 v или 380 v.

      @user-wf9ms9hj3q@user-wf9ms9hj3q Жыл бұрын

  • А потолочный с лестницы сделаешь так?

    @user-sl5vc6du7u@user-sl5vc6du7u Жыл бұрын

  • The steel looks like it comes from the Titanic 🤗

    @deondavids4945@deondavids4945 Жыл бұрын

  • Idol paano mag welding sa malalim na gap sana po mabigyan nyo ng video salamat po

    @rolandlagatjr.5313@rolandlagatjr.5313 Жыл бұрын

  • new subscriber

    @kuyaraulchannel7741@kuyaraulchannel7741 Жыл бұрын

    • ❤️❤️👍👍

      @weld_d@weld_d Жыл бұрын

  • ขอบคุณครับ

    @user-on4kk4hs3h@user-on4kk4hs3h Жыл бұрын

    • 🙏🙏🙏

      @weld_d@weld_d Жыл бұрын

  • Молодец.Враво.

    @user-jv1ss6el9v@user-jv1ss6el9v Жыл бұрын

  • Pakai holo 0.7 bisa bro....

    @laodetea6577@laodetea6577 Жыл бұрын

  • Хрошо, когда без слов!

    @williamspostoronnim9845@williamspostoronnim9845 Жыл бұрын

  • Isso que ele usa para completar a fenda é um outro eletrodo ?

    @danpereira841@danpereira841 Жыл бұрын

    • sim tem que retirar o revestimento

      @joaoscovino222@joaoscovino222 Жыл бұрын

  • That’s exactly what I do, add steel when the gap is to big.

    @mikejung3908@mikejung3908Ай бұрын

  • I have to go slice some potatoes now. I have to relieve the redness and scratchiness in my eyes from the 5+ minutes of arc flash that I endured

    @xsqd5e7en30@xsqd5e7en30 Жыл бұрын

  • bạn ơi hướng dẫn hàn sao mà mài liền không thiếu ok.

    @BaPhai.@BaPhai. Жыл бұрын

  • Layar ke dua ga perlu di tig lgi, karena gap udh kecil tinggal mainkan umpan dan tarikan kawat las yg sesuai aja.

    @ahmadzulhamdan8681@ahmadzulhamdan8681 Жыл бұрын

  • Hay quá

    @recycleanduse2864@recycleanduse2864 Жыл бұрын

  • Mantap

    @BANG-KUN689@BANG-KUN689 Жыл бұрын

  • good !

    @hobbyholic_LoveLive@hobbyholic_LoveLive4 ай бұрын

  • Its not enough heat, try to burn the welding rod in complete not by small dots.

    @miklosparduc582@miklosparduc582 Жыл бұрын

    • Most of the time they just do the small dots to bridge the gap, then after they do a hot pass to burn it all in but your right just doing the dots alone isn’t enough

      @blakekai1136@blakekai11369 ай бұрын

  • Где его учили варить?

    @user-ub2wv7qc9d@user-ub2wv7qc9d Жыл бұрын

  • You know. Watching it on KZhead looks very easy! But if you should try it yourself it won’t be this easy

    @Manuqtix.Manuqtix@Manuqtix.Manuqtix6 ай бұрын

  • THESE HOW TO WELD VIDEOS WOULD BE FAR BETTER WITH A CAMERA DARKEMED LENSE.

    @jiwbink@jiwbink Жыл бұрын

  • Swadee. I'm new to welding. Krob kun mark

    @pnp8849@pnp88499 ай бұрын

  • nice

    @bengkelaro3380@bengkelaro3380 Жыл бұрын

  • Очень интересно, что наши комментарии с сарказмом, мол можно подумать, можно подумать) А комментарии на английском языке сплошь спасибо, ух ты, как круто)). Че так, может иносы смотрят чтоб учиться, а наши чтоб обсирать.....

    @maxsid4147@maxsid4147 Жыл бұрын

  • Mohon ijin bagi ling sopwer oles bias nya gan

    @BANG-KUN689@BANG-KUN689 Жыл бұрын

  • Mantabbbb..👍👍👍

    @Sujiatmoko@Sujiatmoko Жыл бұрын

  • Hay otra solucion más censilla dejar de tomar y MEDIR BIEN

    @eugeniosalas9350@eugeniosalas9350 Жыл бұрын

  • this must be a back yard wanna be welder and was never taught the science of welding

    @budgetratrodbuildbymike550@budgetratrodbuildbymike5506 ай бұрын

  • Убрать зазоры, подогнать болгаркой и не мучаться

    @guitarsevenstring@guitarsevenstring9 ай бұрын

  • А можно вопрос а что это за паласка

    @user-rl1tn6pf1i@user-rl1tn6pf1i Жыл бұрын

  • Штангенциркуль держат наоборот.

    @user-jw8ig5yp5e@user-jw8ig5yp5e Жыл бұрын

  • Tip 3 Buy a MIG.

    @eckyx9019@eckyx9019 Жыл бұрын

  • Обмазку с присадка нужно убрать

    @user-tx4fd5bn8j@user-tx4fd5bn8j Жыл бұрын

  • Двумя електродами?

    @maidazzz6598@maidazzz6598 Жыл бұрын

  • ❤okey

    @alirezanazary-kq4td@alirezanazary-kq4td29 күн бұрын

  • A real welder would either bridge it or keep your heat on the thick side and wash it over to the thin. Most importantly someone should learn to cut square or read a tape and avoid this altogether

    @cefkungfupipewelder1568@cefkungfupipewelder1568 Жыл бұрын

    • Luckily for me I'm not one of those so I can use this technique 🥀

      @mauiztic@mauiztic Жыл бұрын

    • Judging by the uniform gap all the way across, and depending on the actual use for that box section, I'd have cut a piece of 5mm thick plate and slid it straight in giving it a lot more structure, reducing the chance of slag inclusion/ porosity in those welds, but then that's all down to skill level and what the work piece is being used for. But also fully agree with your method

      @sbr1160@sbr1160 Жыл бұрын

    • It's a solid technique if your unable /do not have the skills etc or materials in hand to dial down to material thickness. That tube looks relatively thin in contrast to the rod. Same thing as doubling rods in TIG or going higher feedrate/lower voltage for mig. Or a spot timer fill. An ingenuitive mind makes it work, and it looks solid

      @davidwilliams4250@davidwilliams4250 Жыл бұрын

    • @@davidwilliams4250 it is a solid technique if lacking experience. Not saying it won’t work, but will definitely not be as strong.

      @cefkungfupipewelder1568@cefkungfupipewelder1568 Жыл бұрын

    • I agree on the bridging

      @downhilldaddy5282@downhilldaddy5282 Жыл бұрын

  • Мог бы просто точечным заварить, набрасываешь миталл, потом просто обеваешь шлак и все

    @user-pz5mt8ie2c@user-pz5mt8ie2c Жыл бұрын

  • Yo coloco un clavo o las colillas de los electrodos y sobre ellos soldo

    @helegjulianriveramurillo1307@helegjulianriveramurillo1307 Жыл бұрын

    • bueno

      @weld_d@weld_d Жыл бұрын

  • Soy Osmar, y me gustó mucho los videos, pero cómo saber que tipo de electrodos debemos utilizar para cada caso. Desde ya muchas gracias y q DIOS los bendiga.

    @osmarquieu9609@osmarquieu9609 Жыл бұрын
KZhead