HOW TO WASH CAR INSIDE GARAGE DIY DETAILERS WASHBAY
2021 ж. 16 Ақп.
12 630 Рет қаралды
amzn.to/37oL484
THIS IS THIS TARP I USED IN THE VIDEO. 6.5FTX13FT. MY WALLS ARE PAINTED WITH FLAT SHERMIN WILLIAMS EXTERIOR GRADE PAINT BUT I DIDNT WANT TO RELY ON THE PAINT ONLY. FOR APPROXIMATELY $50 YOU CAN DO THE SAME THING. I USED SMALL THREAD HOOKS LIKE THESE TO HOLD TARPS UP. amzn.to/3bkd6TD
Nice shop.
6 inch concrete hole saw in the spot where the water pools the most then post hole dig until you can’t anymore and fill it with 3/4 round or crushed stone and boom got yourself a drain and quiet washing
I do this all the time in my garage. Except i just leave the garage door open a crack to let all the water run out and then i use a soft bristle brush to sweep any excess out. If you don't use a nozzle on the hose, you don't even need to put up the plastic. The nozzle spray is what gets the walls wet. If you just let the water run out of the hose for your rinse, the walls don't even get wet.
Same bro. Just control rinse it right out the garage. The. Leave a fan on and garage door open
Swisstrax flooring would help too.
I considered it already. The water accumulates in the front right corner of the garage, the slab settled slightly over time. I’d literally have to pull the tiles up ans vacuum out the water Everytime. Just going to live with it how it is.
Would have loved to see you actually washing
I just worry about getting the garage door motor wet