HOW TO FORM A STEEL CONDUIT OFFSET BEND - Apprentice electrician essentials
An offset, or double set, conduit bend is used to enter electrical accessory knockouts, metal trunking or route conduit round obstacles.
======================
🕐 TIME STAMPS 🕕
======================
00:00 Double set in steel conduit
00:43 First bend 30 degrees
00:59 Setting the mark
01:08 30 degrees
01:23 Measure 50 mm
01:45 Magic mark
02:11 Mark against the former
02:49 Second bend
03:27 Under bent
04:00 Adding more bend
04:28 Touch more bending needed
05:17 Set to 50 mm
================================
🔦 More conduit videos from eFIXX
👉www.efixx.co.uk/metal-conduit
👉www.efixx.co.uk/how-to-bend-co...
👉www.efixx.co.uk/conduit-instal...
==AD=====================================
Series produced in association with
Metpro - Conduit and accessories
👉 hub.efixx.co.uk/metpro
Bend-it-now - Conduit Bender
👉 hub.efixx.co.uk/bend-it-now
=========================================
📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. 👉hub.efixx.co.uk/youtube-subscribe
========================================
⚡️ Take a deep dive into the latest electrical products, applications and technology
👉 hub.efixx.co.uk/essentials
=========================================
🚧 More resources for electrical apprentices and learners
👉 hub.efixx.co.uk/apprentice
=========================================
#efixx #conduit #electrical
Thanks for the conduit bending tips extremely helpful for helping me pass my am2s. Would be great if you guys could do some more videos on 20mm plastic conduit. I had to do a 90 into a double set
Great video series guys, thank you
This’ll help me with my AM2S thanks!
Beautiful instruction, best teacher !🔥🔥
If you just double rise for a 30 degree offset that will be the second mark and you can do it in one go and not have to take the pipe out of the machine. Eg. your 50mm rise would be 100mm between the marks.
Quedó estupendo el trabajo. Súper!!
Gracias Luis 👍🏼
I had do this with a 23mm drop and really stuggled, great video though could do it with a less drop so I can see how I need to do it please?
How are you guessing what 30 degrees is? I’m sitting my AM2 soon and have been told I can’t use an inclinometer. I won’t just be able to bend the pipe and know that I am looking at a bang on 30 degree angle which means the conduit isn’t going to meet with the box fixed on the wall.
If possible be nice to see how ppl tackle high offset bends within the middle of the tube having to use the bottom side of the former 👍🏽👍🏽👍🏽👍🏽🙂
Use a spirit level on your phone to get the same angle to get the parallel set accurate. They do work and the apps are free
It would be great to see an example where you have to go over 2x2 galv trunking, but not in a bubble. This method, but the American term, 4 point. 👍
I used to use a wooden block with an elongated hole at the end to do. conduit settings
Ash wood block 👍🏻
Block like a cricket bat with two holes one for 20mm and one for 25mm
We just bent it between our teeth.
@@markrainford1219 or definitely over the knee for 3/4 conduit,paying for it now though 😩
Hi is there a book on containment ?
What a double, double set called, (if so) so straight with two double set , at different distances, 50 and 90mm.
How else can you measure and mark if on site you haven’t a table to use!?
Think I need to go to the gym?!! What was that conduit made out of?? It looked too essy to bend.
👍👍👍
I'd say "give it a tappy, tap, tap".
Why exactly is changing the first bend so wrong? If say you’re bending a 3m length with just 150mm on the other side of the set it would be physically much easier to just adjust the smaller end
Because your set would change.
Because we know the first was the desired 30deg. Maybe you have to do two or more and you want them to match to look good.
When working on a building site you don’t always have tables So you either do it by eye or ode another bit of conduit on ground This pair would never last on site work
😂😂😂😂
Why Americans are so much better in bending conduits than british. Any chance you can explain the difference in the systems and can we use the american benders. As the british way is total pain with this heavy useless benders. British way is do the bend and hope and pray it looks good.
British conduit is thicker walled than american
You’d earn no money taking that long to do a double set,don’t cut it to short,do that after the set is complete,good for novices though 👍
Dunno i get paid the same no matter what i get done in an hour. Not many blokes work for themselves putting in steel conduit lad
What is wrong with people? This is an informative tutorial aimed at apprentices not a couple of blokes on site doing it on price. Have a day off fella 😴
@@sarge9920 He knows so much about it that he sits watching videos about it. Surprised he has the time, won't be earning any money sat here watching youtube.
Lad it's meant to be a tutorial, showing people through it step by step in detail. Of course it's going to take longer 😂 are you slow