KZhead

Brembo Brake Caliper Rebuild / Restoration, Big Brake kit Honda / Acura TL Type S TL-S 2x Speed

Automotive Revive
2019 ж. 12 Қыр.
2 342 193 Рет қаралды
Жүктеу

Contact me at: AutomotiveRevive@gmail.com
Here is a reupload of my Brembo brake caliper rebuild video, I cut a little out and sped the video up for the busy people.
Become a Patreon and help support the channel in growing! - / automotiverevive
Here are some of the items I used to do this.
Redline EZ50 Powder Coating Gun - amzn.to/34EoC8d
Oxalic Acid Rust Removal - amzn.to/2O6kTdL
Heat resistance tape - amzn.to/2LspTaK
Milwaukee Stubby Impact 3/8 - amzn.to/2ZTwLWx
Torque Wrench - amzn.to/32DeVVF
Milwaukee power ratchet (just as good as the snapon but better price) - amzn.to/34FwBBM
Skat Blast sand blasting gun.- amzn.to/2ZP9VQ7
Neiko Long shank torx bit 3/8 - amzn.to/2LS3MJA
Purple power - amzn.to/2ZXJBnM
Acetone - amzn.to/2Lx57qg
Kawasaki Green Powder Coat - amzn.to/2LtsPUo

Пікірлер

  • No talking, no advertisements, just straight to the point. Perfect

    @EnomesSkate@EnomesSkate4 жыл бұрын

  • This is just soooo satisfying to watch.

    @PureFunction@PureFunction4 жыл бұрын

  • Stuffing the pistons in with no lube is straight savage bruv😂😂 Great vid though, quite clear and concise. Thank you for the upload!

    @SebastianBlix@SebastianBlix4 жыл бұрын

    • lol they had some lube on them but yeah maybe needed a bit more, thanks for watching!

      @EasternNCSportbikes@EasternNCSportbikes4 жыл бұрын

    • Also compressed air works better for removing the pistons from the bore

      @TheShangralaaaa17@TheShangralaaaa174 жыл бұрын

    • @@TheShangralaaaa17 thats what he used.. the blowgun with the rubber tip..

      @dubango98@dubango984 жыл бұрын

    • @@dubango98just people trying to criticize he obviously didn’t want the piston to fly against the caliper.

      @couch123David@couch123David2 ай бұрын

  • Now that’s how you take apart and paint a caliper.. not like all these lame shops that leave it on and cover the rest of the car with plastic and paint everywhere til it looks ok.

    @grafxx5397@grafxx53974 жыл бұрын

  • this will be a big channel i can already see it. keep up the great work sir! this was very satisfying to watch!

    @SubOptimal_@SubOptimal_4 жыл бұрын

    • Thank you much!

      @EasternNCSportbikes@EasternNCSportbikes4 жыл бұрын

  • Very clean! Good job! I need to replace the bushings on mine and I wasn't sure I could do it, until I watched this, thank you!

    @BRZTrackDays@BRZTrackDays Жыл бұрын

  • 本当に職人技ですね！ キャリパーの解体からペイントが見れるなんて、車好きにはたまらんっす。

    @LAVE0603@LAVE06033 жыл бұрын

  • Thanks for showing us that. New project this weekend

    @watsonsynthetics@watsonsynthetics4 жыл бұрын

  • So satisfying to watch! Nice Job and excellent color choice 👌

    @treflippa2@treflippa24 жыл бұрын

  • Best video on KZhead for rebuilding and powder coating Brembos. Great job!

    @jostnyc@jostnyc3 жыл бұрын

  • This is the most satisfying vid I’ve seen on the tube in awhile. Good work. Flawless

    @tonythetiger4560@tonythetiger45604 жыл бұрын

  • You snapped on this project

    @luis708350@luis7083504 жыл бұрын

  • So happy you did this man. Rebuilding mine before they go on my s2k 🤙🏽

    @kushweedfaded@kushweedfaded3 жыл бұрын

  • Awesome job OP. Miss my 2005 TL 6spd 😞

    @Xx_Sterbern_xX@Xx_Sterbern_xX4 жыл бұрын

  • This was so neat, Loved the green!

    @shineracer369@shineracer3694 жыл бұрын

  • This has to be the best Brembo paint jobs for me. They look amazing 😮

    @odanyboy84@odanyboy846 ай бұрын

  • Fantastic rebuild ! Great video! I've been thinking of rebuilding the calipers on my TL-S myself

    @DhruvDrives@DhruvDrives4 жыл бұрын

  • It is a strange thing. I've done this with these calipers before from a Mitsi Evo 8, then bigger 8 piston calipers from a Lambo Gallardo. Yet when I watch this it still seems more satisfying to 'undertake'. I guess I aint doing the work just spending the 'time'. Love it!

    @gaijins30@gaijins303 жыл бұрын

  • Soothing fluidity

    @1231234abcab@1231234abcab4 жыл бұрын

  • Fantastic and therapeutic bro. 👍

    @Slayer-33@Slayer-334 жыл бұрын

  • Skills for days! I don't have the patience

    @getlikeus1247@getlikeus12474 жыл бұрын

  • This is some beautiful work

    @MwendaWahome@MwendaWahome4 жыл бұрын

  • This video just sold me on getting mine powder coated. I was going to just rattle can them but I'll spend the extra $ and get them done right

    @Rickultimate@RickultimateАй бұрын

  • The more consistent you are the more your channel can progress keep up the good work.

    @alithegreat7310@alithegreat73104 жыл бұрын

  • Looks amazing! Great job!!!

    @Neur0bit@Neur0bit4 жыл бұрын

  • Nice... need to do this for my 07 TL Type S

    @christopherrocha1043@christopherrocha10434 жыл бұрын

    • Same here broseph

      @Slayer-33@Slayer-334 жыл бұрын

  • This is some great work

    @FREE_WILL_DEFENDER@FREE_WILL_DEFENDER4 жыл бұрын

  • Beautiful work 👌🏻

    @DC5RParts@DC5RParts4 жыл бұрын

  • Good choice on the milwaukee stubby impact gun

    @Twan5.7@Twan5.74 жыл бұрын

    • It is the best, my goto tool for sure.

      @EasternNCSportbikes@EasternNCSportbikes4 жыл бұрын

  • Those turned out beautiful

    @lawrencecoore2021@lawrencecoore20212 жыл бұрын

  • So satisfying to watch bro!!! 😍

    @noesantillan975@noesantillan9754 жыл бұрын

  • Satisfying ASMR visual indeed💪😎 and in real time too like a true tech

    @IvanGarcia-ug7mf@IvanGarcia-ug7mf3 жыл бұрын

  • They came out nice 👍 , did the same thing to mines earlier this year but mines are metallic blue

    @alex10813@alex108134 жыл бұрын

  • Respect Atleast I’m not the only crazy person that takes off the caliper off the car ty so much

    @B_A_S_E_G_O_D_@B_A_S_E_G_O_D_9 ай бұрын

  • Own a 07 TL-S, which have these. Make sure you use Akebono pads instead of brembo pads. Brembo creates lots of brake dust and squeal a lot. Switched to Akebono and love them.

    @tee2171@tee21714 жыл бұрын

  • Woke up this morning and watched this very relaxing p.s I subscribed as well I'll be watching

    @williamfullman2639@williamfullman26394 жыл бұрын

  • Awasome!! Perfect work perfect art

    @ranger133@ranger1334 жыл бұрын

  • Might have to keep my eye out for these at junkyards. Seems like a cheaper way to get my hands on some brembo calipers.

    @FUNKOfilms@FUNKOfilms3 жыл бұрын

  • 🔥🔥🔥, just bought a set gonna try my best at refurbishing them

    @postup7944@postup7944 Жыл бұрын

  • Nice work

    @apiepamg6214@apiepamg62144 жыл бұрын

  • You are the F'n MAN!!! This was so therapeutic to watch.🤷🏽‍♂️ But who in the hell would dislike this video??! How much would this cost?

    @nonameisthename138@nonameisthename1384 жыл бұрын

    • Everyone who noticed that he used the pliers on the gliding surface of the pistons to pull them out. If he were to replace the pistons (which he now must do anyways), it's all fine. But the pistons looked quite good. Not sure how much it would cost, but you can save yourself some money by not ruining the pistons when pulling them out! (:

      @SchweinungHD@SchweinungHD4 жыл бұрын

    • @@SchweinungHD Yeah, but this looks to be a full rebuild after the spray. So I'm sure the pistons didn't matter at that point

      @nonameisthename138@nonameisthename1384 жыл бұрын

    • @@nonameisthename138 If so, than that's ok. Problem is a lot of people now want to rebuild and repaint their calipers, and some will use his method and reuse the pistons. Some of these will now have defective calipers and could kill themselves or others. Don't mess around with brakes if you don't know what you are doing is all I'm stating 👌

      @SchweinungHD@SchweinungHD4 жыл бұрын

    • @@SchweinungHD Oh I gotcha, and you're right too...be safe brother 🙏🙏

      @nonameisthename138@nonameisthename1384 жыл бұрын

    • @@nonameisthename138 Gotta watch out for one another. Brakes are essentials (y)

      @SchweinungHD@SchweinungHD4 жыл бұрын

  • Those are some beautifully engineered brake calipers. I might start looking for a brembo kit for my truck. 🤔?

    @jerrysedlacek6354@jerrysedlacek63544 жыл бұрын

  • Craftsmanship at its finest

    @classiql@classiql4 жыл бұрын

  • Really nice job!

    @albertaoglifer1132@albertaoglifer11324 жыл бұрын

  • Amazing work

    @allanl288@allanl2883 жыл бұрын

  • Lovely lime green...

    @remnantdesire@remnantdesire4 жыл бұрын

  • It would be nice if you post the torque specs used, plz. Ty! Awesome job btw. Also, how come you didn't clear over the decals?

    @danlosada898@danlosada8984 жыл бұрын

  • 3 people with rattle spray cans watched this video. They didn't like it.

    @Kurosaki990Ichigo@Kurosaki990Ichigo4 жыл бұрын

    • Kurosaki990Ichigo you are telling the truth. This is the best video I’ve seen on repainting brembos.

      @Birdhouseboi810@Birdhouseboi8104 жыл бұрын

    • This needs more likes lol

      @MannyGotit@MannyGotit4 жыл бұрын

  • Masterfully Done!!

    @kingschannel8105@kingschannel81054 жыл бұрын

  • 🏁💯THANK FOR THE VERY GOOD VIDEO LESSON💯🏁

    @lucaabbondanza6289@lucaabbondanza62893 жыл бұрын

  • That's clean I wish I could do this to mine or even switch it out these seem to be better then mine

    @bluntforce8749@bluntforce87493 жыл бұрын

  • Extremely clean and professional work, how long does it take to restore something like this?

    @drstallings_314@drstallings_3143 жыл бұрын

  • Great job!

    @kenbode8806@kenbode88064 жыл бұрын

  • this is awesome, thank you

    @Deemossi@Deemossi4 жыл бұрын

  • Nice joe man

    @everythinghondapro5548@everythinghondapro55484 жыл бұрын

  • Good work

    @mohammedismail4758@mohammedismail47584 жыл бұрын

  • beautiful

    @80schlabach80@80schlabach804 жыл бұрын

  • Congrulations !

    @wellingtonmachado8603@wellingtonmachado86034 жыл бұрын

  • SUPERB JOB!!!!

    @PARDS2@PARDS24 жыл бұрын

  • Beautiful color choice

    @BuiltForSpeed@BuiltForSpeed4 жыл бұрын

  • Nice color. I love it

    @riflebear1711@riflebear1711 Жыл бұрын

  • Nice job!

    @onilovni1234@onilovni12343 жыл бұрын

  • Nice job 👍🏻👍🏻👍🏻👍🏻💯

    @yasharbijani@yasharbijani4 жыл бұрын

  • Руки бы оторвать такому мастеру, который за рабочие поршни вытаскивает

    @gda9010@gda90103 жыл бұрын

  • Nice job! I would have done the bolts black.

    @j.d.7321@j.d.73214 жыл бұрын

  • Green, green everywhere

    @SpongeDude8@SpongeDude84 жыл бұрын

  • Great job 😉

    @gregorypereda4505@gregorypereda45053 жыл бұрын

  • i buy this for my integra 90 and work amazing ... plug and play instal

    @randallaguero5047@randallaguero50474 жыл бұрын

  • Great job very helpfull when doing yourself, Question wht is the torque spec for caliper 👀

    @davidsornoza@davidsornoza2 жыл бұрын

  • Good tools lol ,great video and the job well done ty

    @mauropasillas2054@mauropasillas20544 жыл бұрын

    • Thank you for watching!

      @EasternNCSportbikes@EasternNCSportbikes4 жыл бұрын

    • @@EasternNCSportbikes v Ko Ko

      @jada4477@jada44774 жыл бұрын

  • Wow It's amazing.😀

    @user-hv5qh3jt6o@user-hv5qh3jt6o4 жыл бұрын

  • That's great !

    @user-gq1sw5tc4g@user-gq1sw5tc4g4 жыл бұрын

  • Hey, great video! Can you please share with me your sandblasting cabinet setup, stuff like air pressure and media you use and also any modifications you have done? I have the same blasting cabinet and having troubles with getting it to work properly.

    @danielmatveyev3567@danielmatveyev35677 ай бұрын

  • What did you torque the large bolts to when reassembling? Also what seal kit did you go with? The video is awesome btw! Thanks.

    @adamc2136@adamc21362 жыл бұрын

  • I just bought a cl type-s 6spd😎.

    @jcarney910@jcarney9104 жыл бұрын

  • Just beautiful👍👍👍👍

    @tupapi6989@tupapi69894 жыл бұрын

    • Thank you much

      @EasternNCSportbikes@EasternNCSportbikes4 жыл бұрын

  • Pretty clean work!

    @remolacha46@remolacha464 жыл бұрын

  • Beautiful

    @atmjcdsmaddict7897@atmjcdsmaddict78974 жыл бұрын

  • Que obra de arte un 10 para mi gusto los tornillos en negro así parecen más reales

    @josefernandex5458@josefernandex54584 жыл бұрын

  • Need these on my tsx lol!

    @euroboysean@euroboysean4 жыл бұрын

  • Really good 👌

    @nenadradu6718@nenadradu67184 жыл бұрын

  • Need to put these on my rsx

    @Infamousx51@Infamousx514 жыл бұрын

  • Very nice!

    @edwardthayer9386@edwardthayer93864 жыл бұрын

  • Nice fuckkng video. Straight to it. Very self explanatory no need to yap off love videos like this

    @LuisLopez-tt6hi@LuisLopez-tt6hi2 жыл бұрын

  • How did you find the torque specs?

    @JoranDorifuto@JoranDorifuto4 жыл бұрын

  • Thanks you 🙏🏻😊

    @mustangpyps8988@mustangpyps89884 ай бұрын

  • Nice video 👍. Where did you find a seal kit with the small cross over seal? Centric? Acura doesn't offer the small seal. Also what did you torque the allen bolts to?

    @isaiahreign@isaiahreign4 жыл бұрын

  • I don't understand how anyone could possibly downvote this. AI-driven bots? All of your vids are top-shelf.

    @ChristianGustafson@ChristianGustafson3 жыл бұрын

  • Perfect.... No bs..

    @endercozy9578@endercozy95783 жыл бұрын

  • thoroughly enjoyed this video i dont even have a car :D

    @rolandoresurreccion8216@rolandoresurreccion82163 жыл бұрын

  • Very cool!

    @johnpike1552@johnpike15524 жыл бұрын

  • GREEN ! PARFAIT ✌

    @Xavier-63@Xavier-634 жыл бұрын

  • Are you going to make a video on how to install onto 92-00 spindles?

    @armandoponce8945@armandoponce89454 жыл бұрын

  • What was the torque spec?

    @SLOWF20CAP1@SLOWF20CAP14 жыл бұрын

  • Good job

    @pedrocamiz9397@pedrocamiz93973 жыл бұрын

  • Now if you can rebuild the rtc actuators on a RLX, let me know..lol

    @bun-n-cheese1290@bun-n-cheese12904 жыл бұрын

  • Awesome work! What did ft lbs did you use to torque the calipers halves? Thanks for the help!

    @jairochable6030@jairochable60304 жыл бұрын

  • Nice green..

    @hariadihariadi9377@hariadihariadi93773 жыл бұрын

  • I have learned alot

    @AshAirheart1995@AshAirheart1995 Жыл бұрын

  • Need details bud lmao I'm jealous

    @oscarballesterosguzman5345@oscarballesterosguzman53454 жыл бұрын
KZhead