We will test the strength of huge nuts with a hydraulic press, cold and hot up to 800 degrees
Пікірлер
Unfortunately I have missed the disclaimer and have done exactly this at home. Just by accident I have applied 600 tons of pressure to my metal. What shall I do now?
@franzweber7494 Жыл бұрын
I did the same thing...at my neighbors house so I wouldn't break any rules.
@bobhenry6159 Жыл бұрын
@@anonymous11011 For how long? 😁
@bobhenry6159 Жыл бұрын
Just stop faking
@pranavbagrecha3423 Жыл бұрын
@@pranavbagrecha3423 It's a fucking joke
@jackynetic Жыл бұрын
@@pranavbagrecha3423 hey, jokes just called. They want their existence back.
@Iogaming1 Жыл бұрын
"Don't repeat this at home" Me: Yeah I should keep that hydraulic press back in my pocket.
@mss5460 Жыл бұрын
Repeat it at someone else's home.😁
@tygrkhat4087 Жыл бұрын
Yea cuz it wont he at home
@mrmustache1 Жыл бұрын
Not to mention the means to heat metal to 800°C.
@lamenwatch1877 Жыл бұрын
មលលោ៩៨៨៨៩៩៩
@tangsan2725 Жыл бұрын
I don't even have the hammer
@poopsickle2411 Жыл бұрын
Only the Nokia 3310 could survive that
@ricksanchez5050 Жыл бұрын
Exactly 🥵🥵😂😂
@ameee__ee Жыл бұрын
Nail it bro💯
@loveislifeloveeveryone8341 Жыл бұрын
Those were good phones, nokia should resurect
@jesusmanzano451 Жыл бұрын
Do you watch this video with old ass nokia?
@yawifeinmedms9438 Жыл бұрын
@@yawifeinmedms9438 Sure the Nokia 3310 haved a secred OLED Screen wih Infinitive, collors, Resolution , brightness and 6g you must Only enter the right secred Code 😉
@ricksanchez5050 Жыл бұрын
5:48 That jump scare was better than the ones in horror games and movies 🎬
@yesivanthemadhatter555 Жыл бұрын
These videos are also educational. This is why heat resistant paint is so important for steel constructions.
@Aykan7 Жыл бұрын
Need to tell that to 9-11 conspiracy theorists. Steel doesn't have to come anywhere near melting to lose strength and fail.
@SaulOhio Жыл бұрын
400degF may be still good, but the "fun" starts above 450degC, where the recrystalization starts. Not F, but C. That is not the same. And at 800degC pretty much any construction steel becomes like butter. And common house fires (fueled by carpets, furniture,...) are able to go way above that. The purpose of the heat protection "paint" is to absorb the heat (by decomposing itself) for at least the time needed to evacuate people. But when all the burning things became soaked with kerosene and also burning two floors below, the extra heat make the coating to decompose way faster... Well, we are talking about quite a few mm thick layer by the way, so calling it a "paint" is a bit stretch, but so be it...
@annaplojharova1400 Жыл бұрын
These videos are so satisfying to watch. I love guessing how things will break
@Sammechu Жыл бұрын
same, i love seeing nuts get squished via hydraulic press
@lolzhunter Жыл бұрын
@@lolzhunter same bro
@KazimZad Жыл бұрын
@@lolzhunter that’s what she said
@lillie3029 Жыл бұрын
Anyways the sledge broke like Thor’s hammer mjolnir
@lillie3029 Жыл бұрын
Same i love gussing hoe many tons it takes to destroy the object
@TIMOTHYEET69420 Жыл бұрын
“I don’t get a real benefit” from watching this, besides entertainment and learning a thing or 2! But love these videos and almost stop doing anything to watch them 😂! Thankful for all the time, effort and money invested to bring these videos to us! 👍🏼
@emmanuelrodriguez1043 Жыл бұрын
Impressive how the sledgehammer able to withstand that much of pressure!
@TomburiohTalun Жыл бұрын
Interesting, but more detail would be useful, such as the alloy of the metal, the hardness or temper. This could also be stated as the grade, for bolts & nuts.
@TomCee53 Жыл бұрын
the thing about steels is once you heat it to above 400c, you've ruined any hardness or tempering properties it had beforehand, even if you allow it to cool back down to ambient room temperature. it will be roughly as soft and malleable as cold mild steel unless you can reharden and re temper it, which for something that big and thick, is really hard to do.
@ashiehakoto1490 Жыл бұрын
Were the Twin towers heated to above 400c during 911?
@biohazardcel Жыл бұрын
How you know this
@xyoungdipsetx Жыл бұрын
@@xyoungdipsetx smithing channels i guess
@trip_draw1492 Жыл бұрын
This is the key thing “9-11 truther’s” fail to grasp. It’s entirely possible to hit 450c in a contained fire. You don’t need to melt steel to ruin it’s structural properties, just get it to ~450c/850f. Even 400c would likely be sufficient.
@geoffstrickler Жыл бұрын
@@geoffstrickler how would the foundation get to 450 degrees if the fire extended to the top floors? And how did building 7 fall from the bottom up when nothing struck it?
@TheSuperBoyProject Жыл бұрын
Good you warned me to not repeat at home. I just wanted to pick my 500 ton hydraulic press out of the wardrobe to try it out. You saved my life ;)
@igortcgg Жыл бұрын
1:51 i like how the other iron bar seems so happy seing his friend sliced 2. Like "Yaayyy finally, plis do it again"
@allvid_ Жыл бұрын
So if anyone ever had any doubt about heat affecting steel, I guess now you know.
@7t2z28 Жыл бұрын
How well does the fire-resistant Steel + Molybdenum used in large buildings perform?
@zyxzevn Жыл бұрын
It's my first time seeing something not break under the hydrolic press after a steel sphere
@tatellopitso Жыл бұрын
"Don't try this at home" Yeah sure because I just happen to have an industrial press in my living room
@quantomic1106 Жыл бұрын
Wow! En serio por la forma curva de las tuercas pensé que no les pasaría nada
@miikemartinez1351 Жыл бұрын
your videos are great, you work hard
@Bekir816 Жыл бұрын
I really liked watching the red hot steel blocks get squished with less weight than the cool pieces!😊👍
@johnnation7135 күн бұрын
At 07:55 the color suddenly changes to black... interesting! And one can also see that metal at 800°C, the strength drops dramatically, not only for thrusting, but also bending and pulling forces. Remember something....?
@hcgreier6037 Жыл бұрын
so open air burned jet fuel which is about 1100C … might have had an affect on that something causing that what it supposedly could not and be responsible for the sudden drop in the continuity of ‘being alive’ of those people in there. i am fairly sure that the floors above that point were heavier than 500tonnes… and the weakened structure was able to go downstairs after a while… hmmm its a sad sad event :( may all rest in peace.
@mityaboy4639 Жыл бұрын
Guy: do not try this in home Me: *hey mom can i buy 500 ton hydraulic press?*
@bruh3728 Жыл бұрын
Mom: wth is that thing?
@lumianaspoi Жыл бұрын
😂😂😂❤
@the_turanАй бұрын
I was trying to follow the gauge but didn't get the readngs you gave. Is there some kind of constant or multiplier or other adjustment that has to be applied to the gauge to get the accurate reading?
@dncarac Жыл бұрын
The whole world shakes when something tough breaks with such force
@mushfiqurrahman25158 ай бұрын
I always get a strange feeling when it looks like it's about to break
@fabianmtk4471 Жыл бұрын
Want to hide myself
@prazvillrzao3037 Жыл бұрын
There must be a psychological reason why I like to watch hydraulic press videos
@ROBERTORRRR110 ай бұрын
resistance of things
@TheRoyalAceGamer9 ай бұрын
Seeing the ultimate demise of objects as they get slowly crushed to death, with no return of hope. What
@xenai.7 ай бұрын
repressed homosexuality
@odin13137 ай бұрын
Perhaps you're under tremendous pressure?
@johnsmith76767 ай бұрын
Человек любит разрушать - поэтому
@user-ul7rl9hu3n6 ай бұрын
Talk about ‘slow forged’ metal. It would be interesting to know what properties these have if turned into tools?
@MountainRaven1960 Жыл бұрын
I would really like to know how the strenght is teperature-dependend. Is there a difference if you heat it up to only 200 degrees ? I think this is a temperature which could happen to a hammer (seldom, but possible) if you work on forging steel.
@hinkepank1239 Жыл бұрын
If there wasn't, why would a blacksmith put his workpiece right into the middle of the hearth and even increase the temperature by pumping air into it?
@Nikioko Жыл бұрын
Alot of metals are strengthened by work hardening, which is essentially where sliding atoms (very simplified explination of dislocations) get stuck and restrict the movement of eachother and make it harder for the material to deform. Increase strength make it less ductile. When you increase temperature these dislocations can defuse and they basically aren't in eachothers way anymore. So effectively you can heat the metal and cool it again and you will get a similar effect. Another factor, significant but not as significant is that each atom has more energy in hotter temperatures which means less mechanical stress (force over area) is needed to be applied for it the dislocations to move and the material to deform
@tusharbhudia9421 Жыл бұрын
You're the first yt channel creator to break a sledgehammer I've seen so far. Congratulations. The released every from that was amazing. Well done. Subbed you too.
@tommygoins4949 Жыл бұрын
Great video, what if you heat the compressed steel to 800 degree again and apply the same 500T?
@nowar6697 Жыл бұрын
Thank you 🙏 i wonder 💭 I never Owen it! ⚒⚒. It is heavy too.great 👍video 🎥keep break-’em 😅
@mikesahle1193 Жыл бұрын
It would be interesting to take the same type of nuts and go to the opposite extreme. How much more brittle would they be after immersion in liquid nitrogen?
@adamclarke7394 Жыл бұрын
They would actually become stronger.
@TheRatLiker Жыл бұрын
@@TheRatLiker really? Whys that?
@truthhunterhawk3932 Жыл бұрын
As soon as the press started imparting energy into them they would rapidly heat up
@jedaaa Жыл бұрын
@@truthhunterhawk3932 essentially, rapid cooling creates stress within the metal's inner structure. This does make it brittle, but it also makes it very hard since the stresses prevent the grains inside from moving
@tristen9736 Жыл бұрын
@@TheRatLikerThey’d be harder. But weaker, it will instantly explode once it goes like a few millimetres compressed, heat makes things flexible, cold makes things hard but explosive
@Lifepassesbysomerly4 ай бұрын
Thanks for the farce!!
@74tgf Жыл бұрын
Steel retains less then 30% strength at those temps so this doesnt surprise me in the least.
@jimbillybob46310 Жыл бұрын
Every time I see these I get the music of the terminator being crushed run through my head.
@Muted152 Жыл бұрын
How do you keep your foundation from cracking or being damaged?
@LowKDPlayer6 күн бұрын
That hammer exhibited some very nice fine grain, nice steel.
@sheerluckholmes5468 Жыл бұрын
Are you able to get liquid nitrogen? I'm curious to see the strength of metals at extremely low temperatures.
@yelnatsch517 Жыл бұрын
That be cool
@xyoungdipsetx Жыл бұрын
@@xyoungdipsetx quite literally
@sttlok Жыл бұрын
At −195.8 °C (boiling point) the metal would exhibit extreme brittleness
@sheerluckholmes5468 Жыл бұрын
@@sheerluckholmes5468 exactly 😏
@yelnatsch517 Жыл бұрын
Muy satisfactorio y relajante
@josemariarodriguezmoreno4448 Жыл бұрын
Wow can’t believe how powerful that press is 🤯
@arlind530d Жыл бұрын
Nothing beats the almighty press 😎👊
@kingofthegod8983 Жыл бұрын
500 tons is alot thats like putting 30 trucks in one small area on whatever is under it
@TIMOTHYEET69420 Жыл бұрын
@@TIMOTHYEET69420thats even scarier cause its concentrated into one small area
@intruder9127 Жыл бұрын
@@kingofthegod8983 nokia 3310 🤣
@sarojmitu6668 Жыл бұрын
@@TIMOTHYEET69420more like 50-100 tanker trucks.
@HypeJutsu9 ай бұрын
It's amazing how something small can still creat such shock waves.
@kwisatzhaderach95917 ай бұрын
what shockwaves are you seeing? lol
@jeezdutz36432 ай бұрын
i always wondered why when something fails or get out of the press the support or the base is flying up
@mehdisol7094 Жыл бұрын
Everything, absolutely everything, is compressible. If the compressed thing is still in its springy region, its a spring. The base, workable and press pieces on the table all get compressed. When the victim fails, the springs, well, spring with absolutely massive amounts of energy.
@dougaltolan3017 Жыл бұрын
I love how the sparks flew out of the mallet.
@PlanetRockJesus Жыл бұрын
What were hydraulic presses supposed to do again?
@KAMIKAZE557 Жыл бұрын
Now I understand why you don't have any stress and you enjoy going to work
@scotthultin7769 Жыл бұрын
I had a thought that the sledgehammer before it broke was basically a Thors Hammer. No one on earth would have been able to move it.
@Wunba Жыл бұрын
wunba here?? wtf that was unexpected
@ShinerBeast5 ай бұрын
Yes❤❤❤❤❤❤🎉🎉🎉😂😂😂😅😅😢😢
@user-fd8tb9dx9e3 ай бұрын
What the actual frick, WUMBA HERE??!!
@Giveme100ksubsАй бұрын
The guy got a hydraulic press as a birthday gift. Since then he has been pressing anything he can pay his hands on.
@neumoi3324 Жыл бұрын
wow I was very surprised to see the impact of the hammer which was very fast 🤯
@gobanggaming9786 Жыл бұрын
J'ai le même thermomètre laser et 800°C est le maximum qu'il puisse mesurer... la pièce métallique doit faire bien plus de 800°C dans sa partie basse...
@Loran1972 Жыл бұрын
It amazes me how they pack 500 tonnes of pressure into such a small area
@patrickrico2467 Жыл бұрын
It's important to indicate the temperature of the experiments in general. Because, hardnesses may be different. Russia and UAE have different temperatures
@abdeljalilbouallegui3776 Жыл бұрын
Great work
@SC.243k Жыл бұрын
Congrats in advance on a million subscribers. Been a fan since day 1. So satisfying to watch.
@jacobgarcia7918 Жыл бұрын
Prove it
@Koshanitsu Жыл бұрын
@@Koshanitsu what he gonna prove it with 😂😂
@Vexxy197 Жыл бұрын
@@Vexxy197 a video
@Koshanitsu Жыл бұрын
If you said day 1 are you from 100 BC I know the answers probably no
@Pensilvania_good Жыл бұрын
@@Pensilvania_good 100 BC isn't day one.
@jacobgarcia7918 Жыл бұрын
Good experiment and be safe, also well done
@inbarasan55 Жыл бұрын
Thank you for the warning not to repeat it at home. But what do you think how many of the viewers have such a hydraulic press at home?
@MarkusDuesseldorf Жыл бұрын
any chance you could heat some igneous rocks and showthe fluid nature at different pressures?
@fuzzzeballs Жыл бұрын
This is THE PRESS, beautifull and enchanty power, few things coud resist that. Russian and american quality things, like this giant wrench. Congrats for the wonderfull work, dude!
@Michael-yt8gk Жыл бұрын
Tell me pleace what russia produce , wich quality things ??? Death and war???
@exeissysfreiheit8228 Жыл бұрын
It's interesting whatever you press gets damaged except for the press pads. Perhaps you should also try an egg painted in yellow and black.
@_Redu Жыл бұрын
What is this used for? Is it on big ship engines or bridges?
@janhansen5546 ай бұрын
from what material is this hydraulik press
@p.8410 Жыл бұрын
Muito satisfatório
@arrasca1422 Жыл бұрын
Hello again Chip! Wow those are some big nuts you have there. Not to be trifled with. In the cold press test I could almost hear the nut asking for a nice hard bolt to be wound in. It would probably only flex .2 mm with those threads. The nut would be hard enough not to spread around the theoretical bolt. We could see the paint on your press adaptor plate bubbling from the heat transfer. Was that enough to remove the hardness from it? The small kiln for sure was way over 800 c. Looked like twice that. Nice work, we miss the "Here we go!" Good luck.
@leonv1553 Жыл бұрын
"Big nuts" 💀
@ON-on2if9 ай бұрын
I was watching those factory videos where red hot blocks of steel are hammered into whatever shape. I commented on how long they stay red hot and apparently the hammering keeps the metal hot. Slightly off topic, I know.
@darylcheshire1618 Жыл бұрын
0:53 "Maxwell The Cat"
@ZandomLEFT Жыл бұрын
Из нагретой гайки, получилась прикольная пепельница.
@user-um9ix3dx7z Жыл бұрын
I wonder how presses are built so that they don’t break themselves.
@Heimdall1987 Жыл бұрын
they aren't. You need to repair them regularly, if you use them above certain pressures. Other than that, they are just build out of thick materials and use really strong cogs and transmissions to create the pressure.
@m.h.6470 Жыл бұрын
I like how he collected data thru each phase of the experiment
@mikeepps8346 Жыл бұрын
What type of metal is the press made from?
@cameronburch3532 Жыл бұрын
Its very dangerous.
@SaliouNiangwasega Жыл бұрын
These are Soo satisfying to watch
@poizn1 Жыл бұрын
Everybody gangsta till the object somehow becomes a black hole
@ThisMight-be2gm8 ай бұрын
The force of these objects are so incredible, I'm just glad nobody gets hurt. 👍😃👍
@skeletor7908 Жыл бұрын
Muy buen video ya me suscribi y le di like
@puesponteloi.j.o.d.e.l.a.b2243 Жыл бұрын
I´ll be doing it at my Friend´s Home, then.
@berndjanipka3382 Жыл бұрын
Who else shocked when the hammer broke? 😂😂😂
@user-kb3lc2fd3v Жыл бұрын
I got shocked when the hammer broke the press 🤣
@JaroksAsylum Жыл бұрын
Heating a rusted nut allows it to be turned, I think I know why. It will be good knowledge for me.
@user-qo7fh4ky8e Жыл бұрын
Пора делать пресс на 10 000 тонн.
@Voxdej Жыл бұрын
"Do not repeat at home". OK ,thank you for the advice. I won´t use my personal 500 ton hidraulic press for this purpose.
@Joao-be2gl Жыл бұрын
Thw music that starts at 6:00 reminds me of the old days of youtube, aka about 6-7 years ago that kind of music would be like on every animation channel
@Funtime_Lycanroc Жыл бұрын
That heated nut was awesome
@jasonhovey815 Жыл бұрын
He thought it was a normal hammer! And ended up pressing Thor's hammer! Rookie mistake!
@user-jg4ns7pn6c Жыл бұрын
!
@Vexxy197 Жыл бұрын
5:48 , damn that jumpscare doe .
@straider2009 Жыл бұрын
Love it!❤
@CRUSHitNOW Жыл бұрын
Such a great visualization of the issue with the "Jet fuel can't melt steel beams" claim.
@buck_X5 ай бұрын
that heated bolt is now Modern Art, bet you could sell it ;)
@69Jynx69 Жыл бұрын
Who will be having a hydraulic press in home😂
@gananaveenchannel1089 Жыл бұрын
What material is the press made of?
@rumifede Жыл бұрын
no joke these have some good jump scares
@bigstanky2037 Жыл бұрын
"Do not repeat at home" Damn i was about to pull my hydraulic press and my 800° material out of my pocket
@Kaitri Жыл бұрын
There’s no way that machine can apply 1,000,000 lbs of pressure
@isaactimms83 Жыл бұрын
Why?
@SoMuchFacepalm Жыл бұрын
Brittle fracture versus ductile failure. They make curves that map this...
@Flutistno34 күн бұрын
that's what I was waiting to see. I thought the steel would split.
@user-pd2gu6li2n Жыл бұрын
Jesus Christ is Lord, King and Our Savior!
@grantwall27227 ай бұрын
0:02 He must’ve stole the nuts, bolts and screws Putin’s nuclear weapons are made with, Koreas nuclear weapons, America’s word war tanks. This guy very likely has an anchor, a scimitar, a machine gun, military uniform in order to get all this stuff o_O And at 1:42 just from cracking that 1st thing, he easily made all the bugs possibly under his floors or within his walls wake up Colorado’s Military saw on their Richter scale a 1.0 lvl noise was just heard.
@StickFiguresMaster4 ай бұрын
Amen!🙏
@brainlessboi555Ай бұрын
L bozo
@jollyrogermateАй бұрын
The mallet exploding literally made me jump lmao
@Dylan-wo8os Жыл бұрын
Imagine using that molten metal to make a blade, you'd be a legend on the medieval ages
The one thing that will save us from a robot apocalypse
@mrmustache1 Жыл бұрын
Yes, whatever you do, do not heat huge nuts above 800 degrees at home. But if you do heat them by mistake, keep them away from your home 500 ton hydraulic press.
@Michael-iw3ek Жыл бұрын
2:40 was not expecting that result at all!
@joaosergiodearaujoneto415112 күн бұрын
Can you make hidraulic pressure vs hidraulic pressure?
Unfortunately I have missed the disclaimer and have done exactly this at home. Just by accident I have applied 600 tons of pressure to my metal. What shall I do now?
I did the same thing...at my neighbors house so I wouldn't break any rules.
@@anonymous11011 For how long? 😁
Just stop faking
@@pranavbagrecha3423 It's a fucking joke
@@pranavbagrecha3423 hey, jokes just called. They want their existence back.
"Don't repeat this at home" Me: Yeah I should keep that hydraulic press back in my pocket.
Repeat it at someone else's home.😁
Yea cuz it wont he at home
Not to mention the means to heat metal to 800°C.
មលលោ៩៨៨៨៩៩៩
I don't even have the hammer
Only the Nokia 3310 could survive that
Exactly 🥵🥵😂😂
Nail it bro💯
Those were good phones, nokia should resurect
Do you watch this video with old ass nokia?
@@yawifeinmedms9438 Sure the Nokia 3310 haved a secred OLED Screen wih Infinitive, collors, Resolution , brightness and 6g you must Only enter the right secred Code 😉
5:48 That jump scare was better than the ones in horror games and movies 🎬
These videos are also educational. This is why heat resistant paint is so important for steel constructions.
Need to tell that to 9-11 conspiracy theorists. Steel doesn't have to come anywhere near melting to lose strength and fail.
400degF may be still good, but the "fun" starts above 450degC, where the recrystalization starts. Not F, but C. That is not the same. And at 800degC pretty much any construction steel becomes like butter. And common house fires (fueled by carpets, furniture,...) are able to go way above that. The purpose of the heat protection "paint" is to absorb the heat (by decomposing itself) for at least the time needed to evacuate people. But when all the burning things became soaked with kerosene and also burning two floors below, the extra heat make the coating to decompose way faster... Well, we are talking about quite a few mm thick layer by the way, so calling it a "paint" is a bit stretch, but so be it...
These videos are so satisfying to watch. I love guessing how things will break
same, i love seeing nuts get squished via hydraulic press
@@lolzhunter same bro
@@lolzhunter that’s what she said
Anyways the sledge broke like Thor’s hammer mjolnir
Same i love gussing hoe many tons it takes to destroy the object
“I don’t get a real benefit” from watching this, besides entertainment and learning a thing or 2! But love these videos and almost stop doing anything to watch them 😂! Thankful for all the time, effort and money invested to bring these videos to us! 👍🏼
Impressive how the sledgehammer able to withstand that much of pressure!
Interesting, but more detail would be useful, such as the alloy of the metal, the hardness or temper. This could also be stated as the grade, for bolts & nuts.
the thing about steels is once you heat it to above 400c, you've ruined any hardness or tempering properties it had beforehand, even if you allow it to cool back down to ambient room temperature. it will be roughly as soft and malleable as cold mild steel unless you can reharden and re temper it, which for something that big and thick, is really hard to do.
Were the Twin towers heated to above 400c during 911?
How you know this
@@xyoungdipsetx smithing channels i guess
This is the key thing “9-11 truther’s” fail to grasp. It’s entirely possible to hit 450c in a contained fire. You don’t need to melt steel to ruin it’s structural properties, just get it to ~450c/850f. Even 400c would likely be sufficient.
@@geoffstrickler how would the foundation get to 450 degrees if the fire extended to the top floors? And how did building 7 fall from the bottom up when nothing struck it?
Good you warned me to not repeat at home. I just wanted to pick my 500 ton hydraulic press out of the wardrobe to try it out. You saved my life ;)
1:51 i like how the other iron bar seems so happy seing his friend sliced 2. Like "Yaayyy finally, plis do it again"
So if anyone ever had any doubt about heat affecting steel, I guess now you know.
How well does the fire-resistant Steel + Molybdenum used in large buildings perform?
It's my first time seeing something not break under the hydrolic press after a steel sphere
"Don't try this at home" Yeah sure because I just happen to have an industrial press in my living room
Wow! En serio por la forma curva de las tuercas pensé que no les pasaría nada
your videos are great, you work hard
I really liked watching the red hot steel blocks get squished with less weight than the cool pieces!😊👍
At 07:55 the color suddenly changes to black... interesting! And one can also see that metal at 800°C, the strength drops dramatically, not only for thrusting, but also bending and pulling forces. Remember something....?
so open air burned jet fuel which is about 1100C … might have had an affect on that something causing that what it supposedly could not and be responsible for the sudden drop in the continuity of ‘being alive’ of those people in there. i am fairly sure that the floors above that point were heavier than 500tonnes… and the weakened structure was able to go downstairs after a while… hmmm its a sad sad event :( may all rest in peace.
Guy: do not try this in home Me: *hey mom can i buy 500 ton hydraulic press?*
Mom: wth is that thing?
😂😂😂❤
I was trying to follow the gauge but didn't get the readngs you gave. Is there some kind of constant or multiplier or other adjustment that has to be applied to the gauge to get the accurate reading?
The whole world shakes when something tough breaks with such force
I always get a strange feeling when it looks like it's about to break
Want to hide myself
There must be a psychological reason why I like to watch hydraulic press videos
resistance of things
Seeing the ultimate demise of objects as they get slowly crushed to death, with no return of hope. What
repressed homosexuality
Perhaps you're under tremendous pressure?
Человек любит разрушать - поэтому
Talk about ‘slow forged’ metal. It would be interesting to know what properties these have if turned into tools?
I would really like to know how the strenght is teperature-dependend. Is there a difference if you heat it up to only 200 degrees ? I think this is a temperature which could happen to a hammer (seldom, but possible) if you work on forging steel.
If there wasn't, why would a blacksmith put his workpiece right into the middle of the hearth and even increase the temperature by pumping air into it?
Alot of metals are strengthened by work hardening, which is essentially where sliding atoms (very simplified explination of dislocations) get stuck and restrict the movement of eachother and make it harder for the material to deform. Increase strength make it less ductile. When you increase temperature these dislocations can defuse and they basically aren't in eachothers way anymore. So effectively you can heat the metal and cool it again and you will get a similar effect. Another factor, significant but not as significant is that each atom has more energy in hotter temperatures which means less mechanical stress (force over area) is needed to be applied for it the dislocations to move and the material to deform
You're the first yt channel creator to break a sledgehammer I've seen so far. Congratulations. The released every from that was amazing. Well done. Subbed you too.
Great video, what if you heat the compressed steel to 800 degree again and apply the same 500T?
Thank you 🙏 i wonder 💭 I never Owen it! ⚒⚒. It is heavy too.great 👍video 🎥keep break-’em 😅
It would be interesting to take the same type of nuts and go to the opposite extreme. How much more brittle would they be after immersion in liquid nitrogen?
They would actually become stronger.
@@TheRatLiker really? Whys that?
As soon as the press started imparting energy into them they would rapidly heat up
@@truthhunterhawk3932 essentially, rapid cooling creates stress within the metal's inner structure. This does make it brittle, but it also makes it very hard since the stresses prevent the grains inside from moving
@@TheRatLikerThey’d be harder. But weaker, it will instantly explode once it goes like a few millimetres compressed, heat makes things flexible, cold makes things hard but explosive
Thanks for the farce!!
Steel retains less then 30% strength at those temps so this doesnt surprise me in the least.
Every time I see these I get the music of the terminator being crushed run through my head.
How do you keep your foundation from cracking or being damaged?
That hammer exhibited some very nice fine grain, nice steel.
Are you able to get liquid nitrogen? I'm curious to see the strength of metals at extremely low temperatures.
That be cool
@@xyoungdipsetx quite literally
At −195.8 °C (boiling point) the metal would exhibit extreme brittleness
@@sheerluckholmes5468 exactly 😏
Muy satisfactorio y relajante
Wow can’t believe how powerful that press is 🤯
Nothing beats the almighty press 😎👊
500 tons is alot thats like putting 30 trucks in one small area on whatever is under it
@@TIMOTHYEET69420thats even scarier cause its concentrated into one small area
@@kingofthegod8983 nokia 3310 🤣
@@TIMOTHYEET69420more like 50-100 tanker trucks.
It's amazing how something small can still creat such shock waves.
what shockwaves are you seeing? lol
i always wondered why when something fails or get out of the press the support or the base is flying up
Everything, absolutely everything, is compressible. If the compressed thing is still in its springy region, its a spring. The base, workable and press pieces on the table all get compressed. When the victim fails, the springs, well, spring with absolutely massive amounts of energy.
I love how the sparks flew out of the mallet.
What were hydraulic presses supposed to do again?
Now I understand why you don't have any stress and you enjoy going to work
I had a thought that the sledgehammer before it broke was basically a Thors Hammer. No one on earth would have been able to move it.
wunba here?? wtf that was unexpected
Yes❤❤❤❤❤❤🎉🎉🎉😂😂😂😅😅😢😢
What the actual frick, WUMBA HERE??!!
The guy got a hydraulic press as a birthday gift. Since then he has been pressing anything he can pay his hands on.
wow I was very surprised to see the impact of the hammer which was very fast 🤯
J'ai le même thermomètre laser et 800°C est le maximum qu'il puisse mesurer... la pièce métallique doit faire bien plus de 800°C dans sa partie basse...
It amazes me how they pack 500 tonnes of pressure into such a small area
It's important to indicate the temperature of the experiments in general. Because, hardnesses may be different. Russia and UAE have different temperatures
Great work
Congrats in advance on a million subscribers. Been a fan since day 1. So satisfying to watch.
Prove it
@@Koshanitsu what he gonna prove it with 😂😂
@@Vexxy197 a video
If you said day 1 are you from 100 BC I know the answers probably no
@@Pensilvania_good 100 BC isn't day one.
Good experiment and be safe, also well done
Thank you for the warning not to repeat it at home. But what do you think how many of the viewers have such a hydraulic press at home?
any chance you could heat some igneous rocks and showthe fluid nature at different pressures?
This is THE PRESS, beautifull and enchanty power, few things coud resist that. Russian and american quality things, like this giant wrench. Congrats for the wonderfull work, dude!
Tell me pleace what russia produce , wich quality things ??? Death and war???
It's interesting whatever you press gets damaged except for the press pads. Perhaps you should also try an egg painted in yellow and black.
What is this used for? Is it on big ship engines or bridges?
from what material is this hydraulik press
Muito satisfatório
Hello again Chip! Wow those are some big nuts you have there. Not to be trifled with. In the cold press test I could almost hear the nut asking for a nice hard bolt to be wound in. It would probably only flex .2 mm with those threads. The nut would be hard enough not to spread around the theoretical bolt. We could see the paint on your press adaptor plate bubbling from the heat transfer. Was that enough to remove the hardness from it? The small kiln for sure was way over 800 c. Looked like twice that. Nice work, we miss the "Here we go!" Good luck.
"Big nuts" 💀
I was watching those factory videos where red hot blocks of steel are hammered into whatever shape. I commented on how long they stay red hot and apparently the hammering keeps the metal hot. Slightly off topic, I know.
0:53 "Maxwell The Cat"
Из нагретой гайки, получилась прикольная пепельница.
I wonder how presses are built so that they don’t break themselves.
they aren't. You need to repair them regularly, if you use them above certain pressures. Other than that, they are just build out of thick materials and use really strong cogs and transmissions to create the pressure.
I like how he collected data thru each phase of the experiment
What type of metal is the press made from?
Its very dangerous.
These are Soo satisfying to watch
Everybody gangsta till the object somehow becomes a black hole
The force of these objects are so incredible, I'm just glad nobody gets hurt. 👍😃👍
Muy buen video ya me suscribi y le di like
I´ll be doing it at my Friend´s Home, then.
Who else shocked when the hammer broke? 😂😂😂
I got shocked when the hammer broke the press 🤣
Heating a rusted nut allows it to be turned, I think I know why. It will be good knowledge for me.
Пора делать пресс на 10 000 тонн.
"Do not repeat at home". OK ,thank you for the advice. I won´t use my personal 500 ton hidraulic press for this purpose.
Thw music that starts at 6:00 reminds me of the old days of youtube, aka about 6-7 years ago that kind of music would be like on every animation channel
That heated nut was awesome
He thought it was a normal hammer! And ended up pressing Thor's hammer! Rookie mistake!
!
5:48 , damn that jumpscare doe .
Love it!❤
Such a great visualization of the issue with the "Jet fuel can't melt steel beams" claim.
that heated bolt is now Modern Art, bet you could sell it ;)
Who will be having a hydraulic press in home😂
What material is the press made of?
no joke these have some good jump scares
"Do not repeat at home" Damn i was about to pull my hydraulic press and my 800° material out of my pocket
There’s no way that machine can apply 1,000,000 lbs of pressure
Why?
Brittle fracture versus ductile failure. They make curves that map this...
that's what I was waiting to see. I thought the steel would split.
Jesus Christ is Lord, King and Our Savior!
0:02 He must’ve stole the nuts, bolts and screws Putin’s nuclear weapons are made with, Koreas nuclear weapons, America’s word war tanks. This guy very likely has an anchor, a scimitar, a machine gun, military uniform in order to get all this stuff o_O And at 1:42 just from cracking that 1st thing, he easily made all the bugs possibly under his floors or within his walls wake up Colorado’s Military saw on their Richter scale a 1.0 lvl noise was just heard.
Amen!🙏
L bozo
The mallet exploding literally made me jump lmao
Imagine using that molten metal to make a blade, you'd be a legend on the medieval ages
How strong the base of hydraulic...🤔
圧力をかける機械より、とんでもない圧力がかかる部位が800℃にさらされても平然と機能するのがすげーよな
The one thing that will save us from a robot apocalypse
Yes, whatever you do, do not heat huge nuts above 800 degrees at home. But if you do heat them by mistake, keep them away from your home 500 ton hydraulic press.
2:40 was not expecting that result at all!
Can you make hidraulic pressure vs hidraulic pressure?