'Built Fast': nothing exaggerated :) It looks great. Can't wait to try it on the field!
@akaFrits1Ай бұрын
I really appreciate all your hard work. You’re a talented airframe designer for sure. But, you know what I appreciate more? Listening to the joy in your voice when you’re talking about and flying your fun creations! Your joy is contagious! 👊
@markmiranda5644Ай бұрын
Thanks! Nothing better than having a design fly well.
@hotlapkyleАй бұрын
Naturally Done Awesome
@ememeableАй бұрын
👍💪✌
@rjung_chАй бұрын
That looks like fun software. Too bad it's rental-ware.
@tenlittleindiansАй бұрын
How good an artist are you especially with an air brush ? I think that's all that is missing right now colors
@ememeableАй бұрын
Love the design and building I use fusion 360 and you've inspired me to give something a go. Looking forward to seeing how you design the inside. I have an old 64mm edf foamie that needs the gear taken out. What easy print fun 64mm have you done...?
@samgibson9153Ай бұрын
Dude this cartoon Viggen! I’ve been flying the 50mm for a few days and it’s the most fun I’ve had. I’m currently scaling it up to 64
@hotlapkyleАй бұрын
I think the set up I have is 4s not that should be OK.... Dying to see how you do the inside lay out etc. What's your site that you will, load the 64mm Viggen to....
@samgibson9153Ай бұрын
Hello. Thanks for sharing. Do you mind letting us know what is the airfoil profile you are using for the wings?. And do you always use 3 degrees wash out. Thanks
@awsstvawsstv28098 күн бұрын
Sorry I can’t share my custom airfoils. I use different washout every plane. I also change the washout depending on the airfoil type and shape
@hotlapkyle8 күн бұрын
Great design! How did you come up with the airfoil you use? Did you use a program like OpenVSP or use airfoil tools?
@SDesigns2023Ай бұрын
I custom make all my airfoils 😁
@hotlapkyleАй бұрын
@@hotlapkyle So more about feeling and just what looks and feels right? Keeping it simple! Nice! I've studied a lot about different airfoils and airfoil design using xflr5, airfoil tools etc. Looks like a great airfoil for the job!
@SDesigns2023Ай бұрын
@@SDesigns2023 thanks! I’d love to learn to use the airfoil simulation tools online. It would help!
@hotlapkyleАй бұрын
How do you make sure everything is centered and measured right?
@Aerospace_Engineering_NoobАй бұрын
I do everything with the mirror function. I only build one side then mirror. If I can’t use the mirror I use axis planes
@hotlapkyleАй бұрын
Are you making a new model?
@aidenkahn4338Ай бұрын
Fatty Viggen
@hotlapkyleАй бұрын
What is this design software , , how about some classics , f4 Fantom or harrier
@vrosi1963Ай бұрын
it is shapr3d
@ollutv3415Ай бұрын
I’ll eventually get to all of them
@hotlapkyleАй бұрын
@@ollutv3415 Ok thanks , i am only familiar with blender 2.8 .i will have a look ,my friend Mark @3d aeroworks he uses blender 2.79 .b for the 30 plus designs he has completed i am ,working on a 1400mm DH98 prototype he designed on rc groups currently, i like that shapr3d shows a measurement of how big the part is you are designing , will have to try it
'Built Fast': nothing exaggerated :) It looks great. Can't wait to try it on the field!
I really appreciate all your hard work. You’re a talented airframe designer for sure. But, you know what I appreciate more? Listening to the joy in your voice when you’re talking about and flying your fun creations! Your joy is contagious! 👊
Thanks! Nothing better than having a design fly well.
Naturally Done Awesome
👍💪✌
That looks like fun software. Too bad it's rental-ware.
How good an artist are you especially with an air brush ? I think that's all that is missing right now colors
Love the design and building I use fusion 360 and you've inspired me to give something a go. Looking forward to seeing how you design the inside. I have an old 64mm edf foamie that needs the gear taken out. What easy print fun 64mm have you done...?
Dude this cartoon Viggen! I’ve been flying the 50mm for a few days and it’s the most fun I’ve had. I’m currently scaling it up to 64
I think the set up I have is 4s not that should be OK.... Dying to see how you do the inside lay out etc. What's your site that you will, load the 64mm Viggen to....
Hello. Thanks for sharing. Do you mind letting us know what is the airfoil profile you are using for the wings?. And do you always use 3 degrees wash out. Thanks
Sorry I can’t share my custom airfoils. I use different washout every plane. I also change the washout depending on the airfoil type and shape
Great design! How did you come up with the airfoil you use? Did you use a program like OpenVSP or use airfoil tools?
I custom make all my airfoils 😁
@@hotlapkyle So more about feeling and just what looks and feels right? Keeping it simple! Nice! I've studied a lot about different airfoils and airfoil design using xflr5, airfoil tools etc. Looks like a great airfoil for the job!
@@SDesigns2023 thanks! I’d love to learn to use the airfoil simulation tools online. It would help!
How do you make sure everything is centered and measured right?
I do everything with the mirror function. I only build one side then mirror. If I can’t use the mirror I use axis planes
Are you making a new model?
Fatty Viggen
What is this design software , , how about some classics , f4 Fantom or harrier
it is shapr3d
I’ll eventually get to all of them
@@ollutv3415 Ok thanks , i am only familiar with blender 2.8 .i will have a look ,my friend Mark @3d aeroworks he uses blender 2.79 .b for the 30 plus designs he has completed i am ,working on a 1400mm DH98 prototype he designed on rc groups currently, i like that shapr3d shows a measurement of how big the part is you are designing , will have to try it
Or is this a fatty version
Fatty cartoon version