A friend said it wouldn't work. Restoration of an old axe in the old style

Hi!!! In this video I tried to make an old axe, an axe in the old style. How did I manage to restore an old axe?
Hello everyone This time I want to remake an old axe into an axe, stylized in the old style with an ornament of the Maya people. After tinkering with it, I got a good converted axe with a beautiful traced pattern with an ornament in the form of an unknown animal, I also added the head of a mythical animal to the of the axe. How do you like my work?
I took an old axe, presumably from 1967, as the basis for my new axe, the axe was in poor condition, the cutting part was completely worn off, which I had to re-harden in the work. To this axe I decided to betray the form that I came up with myself. What did I do? Cut off unnecessary metal. Cleaned and sanded. He made the hardening of the axe by heating and lowering it into water. When the blank was prepared, I decided to put on it an image on the theme of the Maya civilization in the form of an ornament in a modern style. After electrochemical etching of the drawing, I blackened the metal by the blackening method. Also, when the old axe was completely ready, I decided to decorate the axe with paints. I was satisfied with the result of this work and I hope you also liked it.
I used the following tools and materials: pencil, ruler, awl, angle grinder, drill, grinder, orbital grinder, sandpaper, toothbrush, soda, solvent.
Dear friends, if you decide to repeat what you saw. Do Not Forget - observe Safety Precautions. Gloves, mask, glasses, etc. And also what you see is just a flight of creative imagination, not instructions on how to do it. Thank you for understanding!
TO SUPPORT THE AUTHOR: 🤝🤝🤝 if there is an opportunity to support me, I will be very grateful!!! Donat - www.donationalerts.com/r/miha... 🤝🤝🤝
With your support, you are helping this channel to develop!
Thank you...
00:00 Start - old axe
00:28 Removing rust from an axe with citric acid
01:05 New shape for the old axe
02:04 Shaping an axe with a tool
04:09 Hardening of an axe at home
05:59 Axe grinder
07:18 Drawing an ornament on an axe
09:27 Preparation of drawings on an axe with a steel needle for etching metal
10:05 Double etching of the pattern on the axe
12:30 Preparation of the axe for blackening of metal by the method of cold blackening
15:28 Polishing the axe
16:01 Decorative painting on metal
16:43 The finished result is the restoration of an old axe in the old style
18:03 The final screensaver with links to my other works
#oldaxerestoration #handmade #drawingonmetal #diyaxe #diy