How to Remove Fence Post in 3 Minutes!!! | How to Remove Concrete from the Ground.
Hi-Lift Jack: amzn.to/3XqPLan
Chain with Grab and Sling Hooks: amzn.to/42XIznh
Hi-Lift Jack Base: amzn.to/46KebQ1
Hatchet: amzn.to/44AVxJ1
Kids doing it on their own: • How To Remove A CONCRE...
In this video I show how to remove fence post in 3 Minutes. These same tools and methods can be used to remove concrete from the ground. Using a few simple tools this method can save time and money removing concrete fence posts from the ground. It is so easy my kids were able to remove fence posts.
0:00 - Fence Post Removal Intro
0:31 - Fence Post Puller Tools
1:40 - How to Remove Fence Post with Concrete
3:08 - How to Remove Concrete from the Ground
3:28 - Easy Fence Post Removal
3:50 - Other Helpful Tools for Fence Post Removal
4:12 - How to Remove Fence Post Outro
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
Hi-Lift Jack: amzn.to/3XqPLan Chain with Grab and Sling Hooks: amzn.to/42XIznh Hi-Lift Jack Base: amzn.to/46KebQ1 Hatchet: amzn.to/44AVxJ1
2x12's for the base if they are lying around. Cool VID sir!
I'm not one to comment on videos. My goodness this is a game changer I have 22 posts to remove. Thank you so much!
Glad it helped! Good luck with the removal!
I don't have a fence to remove, but man I enjoyed this video. Especially loved seeing the pride that your son showed in himself at the end. The "I can do this" attitude will serve him well his entire life.
Appreciate the comment! Thx for watching!
I've been digging these posts for years and used a heck of a lot of precious energy doing it! You sir deserve a medal!
Wow, thank you! I appreciate the comment and thx for watching!
Awesome. I am about to save myself roughly $8k thanks to this video. Great video!
I'm not saving anything, but I thought it was awesome too!
Farm jackal was my best friend for years. When car/truck bumpers were made of steel it was a handy rescue tool.
Your helper did a fantastic job!!!
I tried several other methods on KZhead and had no success. This worked exactly as shown. Thank you!!!!
Good Tip ! I have used a automotive floor jack before but your method looks alot easier. thanks for posting.
Awesome tips. This video really delivers! I removed 14 footings from my yard with shovels, 8' digging bar, sledge hammer, and you name it, lots of work. So when i saw this title i thought this is classic clickbait but turn out it is genius!
After trying to dig out a concrete base enough to get purchase on it to pull it out of the hole I realize there's got to be a better way. The next morning I found your video went Harbor Freight picked up a jack and finish the job quickly. I can't thank you enough for sharing your tips and tricks it really helped me.
after pulling four posts up from my clothes line, with a shovel, and having a high lift in the shed... I feel pretty dumb lol ! Great vid
I appreciate the comment! I am sure you will remember next time!
Things happen that way, but thanks for admitting that so the rest of us could get a laugh. But, how could you know? Having one right there though, that's gotta hurt. I could imagine the idea could be used to move quite a few heavy things. It would make a good stump puller if the tree wasn't too big, a rock mover, car parts, etc. Maybe they had a big one when the pyramids were built! I'm getting ready to paint my house. I'm sure I'll find a video with short-cuts after I'm done!
Thanks for this, it's simple and makes so much sense compared to other ways.
I appreciate the comment. Thx for watching!
Great video! It's so easy, a kid can do it....which is what I have to tell myself.
You earned yourself a subscriber. Thanks for the detailed explanation. The biggest tip here is to use the angle iron to keep the jack from tipping forward when jacking the post out.
Thanks for the sub! I appreciate the comment! Yeah the angle iron makes a big difference.
This video helped me and my son remove 4 deeply cemented posts from our side yard in about an hour. Appreciate the idea and links
Awesome! Thx for the great feedback!
I'm so glad I found this video before I got started on my little project. Great tips, thanks!!
Glad it was helpful! Thx for the comment!
I was wondering how I was going to pull these out. Great recommendations! Thank you! New subscriber!
Thanks for subbing! Good luck.
Great tip with the angle iron stabilizing bar
Man... You are my latest super hero! This method beats the heck outta diggin, pullin, and swearin! (mostly swearin)...Now, how do I get my wife to do it? It's her turn.
Heck yeah! Good luck convincing the wife!
You are right on, I’ve used this exact method hundreds of times and it works great
Excellent! Appreciate the comment!
I used this method yesterday to remove a post buried in nearly 3 feet of very heavy concrete. It worked just as you suggested. I'm grateful to you for the tips.
Nice work! Thx for the comment!
This is great information. I have to remove some old fence posts from the ground. Thanks for sharing!
Appreciate the comment. Thx for watching!
Excellent video and well explained. Thanks !
Glad it was helpful! Thx for the comment!
Thank you for your tips , they were very helpful
Glad it was helpful! Thx for the comment and thx for watching!
Appreciate the info. Someone hit my chain link post broke it off ground level. Now need to remove, replace, and hook the fence back to the post.
Good luck and thx for the comment!
One thing to remember is never allow yourself to be positioned above the jack bar when operating the jack. I’ve seen these things kick and that bar comes up in a big hurry. I see HenryT mentioned the tension on the chain but you also need to remain clear of the upward sweep of the bar itself in all operation.
That's a general principle of physics. If you are cutting with a knife, same idea. Cut AWAY from your body/hands. Make sure the arc of your blade or axe swing is never going to angle toward your body even from a deflection if you miss. Many a leg was probably cut or bruised by swinging an axe or hammer downward, missing the target and the arc of the swing continues past and oops. Shin bone is NOT a happy camper.
Fantastic video gonna be using this when I redo my new retaining wall thanks a lot.. 🏆💯
No problem 👍 I appreciate the comment!
Nice job. I have used a floor jack before but not 48 times. That jack you used is great for this task.
Yeah couldn't imagine trying that with a floor jack. It really was easy once you got in a rhythm. Would have been super easy with two able-bodied men, but I made due with my kids lol.
Nice spread you got there, friend. Beautiful property.
Thank you. Thx for watching!
My post were double the thickness and the concrete bases were far more substantail ( necessity4us due to high cross-winds ). Another issue I had is that as I had originally forgotten to bevel the concreate bases against the posts to allow rain/water to easily run off and not pool round the bases, which resulted in most of the posts being rotten part or all way througn at the base. This made using jacks very difficult/ineffective. So my strategy here was to grind/mill the wooden post remains out and leave the concrete bases in place and simply added new posts of the same size. It all turned out to be a nightmare of a job, that took forever, cost a wodge in cutting and milling bits, and left me with battered hands, arms and shoulders for weeks. The moral of the story is : Never forget to bevel/angle the concrete cement downwards away from the post base, so that water can run off and not sit and rot the posts in the first place. Wish I had watched this video before doing the job, as that would have saved me quite a bit of pain and time I would imagine.
Awesome I already got a hi lift jack I'll try that next time thanks for the information
Thanks for the comment and good luck.
Great video guys, that loop back under the chain is a great tip. I used your method to pull 2-inch steel pipes set in the ground with 2.5 ft of concrete up. Thanks
Good stuff! Appreciate the comment and thx for watching!
Awesome tip!! I loved it. Thank you!!
Appreciate the comment. Thx for watching!
Wonderful son and father, have many more nice memories!
Perfect! Thanks
Thanks for doing this. This is going to help tremendously.
Glad it was helpful! Appreciate the comment!
Thank you. I got some tight spots I can’t get to w the tractor. I’m a fan of leverage!
Glad to help! Thx for the comment!
Wat she said
Nice idea. I remember old farmers saying don’t use concrete to set fence posts that you can set them tighter packing the soil properly (they were right) but it is reality. I had my fence replaced that I built years ago myself without using any but the contractor concreted them this time. I don’t think I will be doing the next one though.
I made a 9ft tripod and secured a winch and pulley to it and just hit a button and watched my family look surprised 😂 worked like a charm
Sounds better but also way more expensive!
@@CarpeDiem601your right,..but I already have a winch that I made a bracket for, to attach it to anything (tree, tripod,my van hitch, etc.)
I made the same tripod with 3 ton winch...waiting to save 20 hours on my first tree trunk!
@@westvalley411 good luck ! I don't think 3 ton will be enough tho. if u use a pulley u can double the power to 6 ton, but trees and posts are two different animals, lol. wish u luck. also I was using a 5.5 ton with pulley to get 11 ton pulling force and it was almost not enough power on some. but pulsing the button every few seconds worked well.
@@southern_mericanhmm, good to know, thanks for advice.
Great video!. Wish they would teach this kind of stuff in school.
Appreciate the comment! Thx for watching!
Good video, and well done to your assistant.
Thanks 👍. Both boys definitely put in some work!
Nice work! All business, success!
Awesome! Thanks for sharing!
Dang Bro, THIS is a great idea! I love leverage. Myself and a family member both have to do this soon, will save a ton of time.
Appreciate the comment, and thx for watching!
finally a video which details which hooks to use and how to use them
Appreciate the comment. Thx for watching!
We used a very thick piece of rebar, which we put through a hole we drilled in the fence post, and then two automotive jacks on either side to lift the posts out. It worked, and saved us a lot of money, but your way is better. I'll have to remember that.
Amazing-a useful video on KZhead
Thanks, very well presented
Glad you enjoyed it! Thanks for the kind words and thx for watching!
Excellent video!
Thank you very much! I appreciate the comment!
Excellent presentation and good information. New subscriber. Thanks
Welcome aboard! I appreciate the comment and thx for subscribing!
Pulling the old posts was my one major hesitation about replacing my fence by myself. Thanks for this idea.
Glad to help. Good luck!
I've been looking for this solution for a long time
Thx for the comment and thx for watching!
thanks for the tip
I have a number of steel fence posts to move to new locations. I was planning to cut them off at the ground but I think using your technique I may be able to reuse them. Thanks!
Sounds great! Good luck and thx for comment!
Excellent video. I love this McGyvering type stuff
Glad you enjoyed it!
Great suggestions, I appreciate it.
Appreciate the comment. Thx for watching!
I need a kid like that. very handy
Usually takes some coaxing, but trying to raise them right. Appreciate the comment. Thx for watching!
Well done! I've seen it done with a 2x4 and a pump jack, but this looks nicer/easier.
Appreciate the comment and thx for watching!
Great.. I guess I could also remove my backyard swing set concrete post with this method. Thanks
You bet! Thx for watching and thx for the comment!
@thebumpchannel wondering if the high lift jack can be rented from Home Depot?
@@Ifeanyi736 not sure
Great video... Thanks!!!
This is a great idea, I wonder if this would work for pulling out small shrubs and trees too.
I am sure it would. That is next on my project list. We lost some boxwoods and burning bushes in a late freeze. Going to try it. Thx for the comment!
Yes it will I've used this same method pull small trees and medium size bushes (Lillac and forsythia)
Same here, it works on small trees and shrubs.
As a maintenance technician... you have my respect... and my subscription. Carry good sir.
Much appreciated! Thx for the comment and thx for subbing!
Brilliant idea!!
Thank you! Cheers! Appreciate the comment!
Fantastic video! Thanks much.
Glad you liked it! Thx for watching!
Keeper, sure this will come in handy.
Very good idea. Thank you!
Glad it was helpful!
Outstanding, Mike, UK 🇬🇧
Thank you very much.👌👌👌
In Wyoming, We also call these “come-a-long” jacks or shepherd’s jacks. Besides using them for pulling fence posts, they are also used to stretch barbed wire, pulling a wagon or a pickup out of a ditch, pulling a deadfall tree or a boulder out of the road, and any place where a rancher needs to pull an oversized load while out alone on the ranch or in the wild. When I was a kid, my dad always had a come-a-long attached to his old blue Jeep when we went camping or fishing in the high country. Survival gear in 4WD country.
Exactly why I kept a old bumper Jack that had been deemed totaled by insurance company. Sometimes I had the chain slip but hammering a nail into the wood helped the chain grip.
Thx for sharing! I appreciate the comment!
Great Idea, thanks for sharing. I been looking for a tool like that to help me level up the concrete on the side of the pool. The dirt has been washing away for years and it is uneven now. I was looking for something that could help me lift it up to fill in below the concrete.
Glad to help. Appreciate the comment, and thx for watching! Have a similar project with a sidewalk I need to tackle one day.
The angle iron brace....hmmmm, why didn't I think of that LOL. That's the game changing idea. Thank you!
It really is! I struggled at first trying to do it without it and then improvised with the angle iron. Made it SO MUCH easier! Appreciate the comment.
If you don’t have many to do a digger bar with a chisel end works really well, and if the post has rotted can be quicker and easier than digging round to place a chain. A digger bar is basically a long, heavy chunk of steel bar about 70” long that gives great leverage and concrete smashing power. One of my most useful garden tools for everything from extracting concrete to digging holes in stony ground for planting shrubs and trees.
I managed to bend my digging bar. Every time that I have used it since, I turn it to potentially bend it back, but no luck! :)
@@drippingwax What sort was it? Mine is a “Roughneck Digging Bar 1750mm (69")”. It weighs 17lb and I don’t think I could bend it even if I wanted to (maybe a very slight bend in the flat part at the end, but not enough to affect it).
@@Tailspin80 I don't recall and I moved across the state for grad school, but I drove it into the ground at a 45° angle with a sledge hammer and used it as an anchor to move my shed. I wonder if the ground was frozen that day. As hard as it is in Arizona, the bar tended to move more than the 8'×14' shed.
@@drippingwax Hmm..might not be quite what is designed for! What were you using to pull the shed?
@@Tailspin80What else was I supposed to use to anchor my hand winch? :)
A tip here for safety reasons. When just removing concrete it is very important that the chain is secured prior to lifting it with the jack. While under tension and if the chain slips, the kickback will have tremendous force and anyone unfortunate enough to be at the receiving end will have a lot of hurt.
Thx for the tip and thx for the comment!
I thought he said that in the video already.
I’m not convinced there is much stored energy to release if it slips. Using the brace against the jack was where I saw potential for slipping and an issue.
I almost cried when I saw the safety violations.
Thanks Dad...
Excellent video
Thank you very much! Thx for the comment!
Great vid, very helpful
Appreciate the comment. Thx for watching!
I’m in the northern midwest where at about 10” you are out of black dirt and into clay. I’m having an awful time with this. Post is broken at top of cement in shreads. With this method i have dug down 4 or so inches, wrapped the chain but the cement breaks. Next dug 6” or more & the jack comes off the stand or just slides towards or into the hole (if i let it) Any thoughts? Thinking because of the clay in my area my only option is to dig around the cement and break bits off until it is all out.
Need to wet it. Also support the jack with angle iron or something similar
thanks, I’ve been doing exactly that. not just wetting, I’ve been filling/soaking the hole multiple times throughout the day. Have been using a 4x4 post to brace the top of jack.
Same issue here. I just gave up and started digging. Either the cement splits at the top or the chain slips loose. Maybe spring would be a better time to do this, but doing it in September is a no go, no matter how much water you use. The clay acts as a suction.
@@kooken58 same just kept digging. Got a pry bar I think officially called a tamp bar and pried it out breaking chunks, digging around, prying up. Drilled into wood with bolts thru chain link and pried with jack, bar & shovel. An awful process
Thanks for sharing.
Appreciate the comment. Thx for watching!
Brilliant idea
Appreciate the comment. Thx for watching!
After Hurricane Ike, I had around 250 ft of cedar privacy fence blown down... Nearly all of the posts were snapped off at the level of the ground near the concrete... I used a pretty similar technique with my hi-lift jack to remove the remaining posts and concrete... Main difference is probably the way I attached the chain to the post -- I would loop it around the post a couple of times and then clip it back to the original lead of the chain so that when it was being pulled, it would tighten up on the post like a noose... I replaced it by welding a steel picket (aka "wrought iron style") fence... A lot less surface area for the wind to act upon, so it should survive the next hurricane... The clay soil we have around here is either rock hard during the dry spells or a gumbo that refuses to come off you shovel / post hole digger during the wet spells... Either way, it took a lot more than 3 minutes to do each post... Maybe 3 beers per post is more like it...
Sounds like a good time! Appreciate the comment. Thx for watching!
I used a farm jack back when to do a similar job w 48 fence posts. I used a little different technique. Whish I'd seen this video with all it's fine points before I statrted. Vinyl fence post are a dream.
Thanks for the video. I have all the tools, now I just need to have children.
Got mine trained pretty well. kzhead.info/sun/mpuAZrSusGpso6M/bejne.html Good luck with the children, lol!
Nice kids! Well done.
Thanks for watching and thx for the comment!
Wow, if the old jack works, I can get SO MUCH done that I never hoped to be able to do!!!
Job well done!
Appreciate the comment. Thx for watching!
Super helpful thanks
Glad it helped! Thx for the comment!
Another good way is to wrap the post with chain, have a solid tire and wheel assembly, stand the tire up like it would normally be on a truck, put the chain over the top of the tread, hook the chain to a truck or tractor. As you start the pull, the tire holds the load and pulls straight up. It also absorbs the weight and won’t tear up the ground.
then something snaps and you have a broken truck or worse.. ive seen the videos
@@tejeda7324 use the right equipment and you'll minimize the risk of this. Anything rated for less than 2 tons is foolish.
Good tip! Nice work!
Glad it was helpful! Thanks for watching!
Would a 17 foot chain work or is it more likely to slip?
Absolutely, just wrap more of it, or leave a section unwrapped.
Useful tool 👍
Will this method work on metal chain link fence poles too? What keeps the chain from sliding up the pole?
Just friction and tension. If chain is slipping you can loop it through around itself once or twice, but can get away without looping it at all sometimes.
Yes will work on those as well. I think 2 of mine where of that style from 2 fences ago. I was cleaning up fences spanning several decades, lol.
Thanks. I’ll give it a try. I like easy!
Bend the pole?
The boy is wearing CROCKS!!! Come on dad, get him a pair of steel toed boots for a job like this!
You'll have that on them big jobs 😂
Satisfying 🎉
Glad you think so! Appreciate the comment!
Very nice video, thanks!
Thank you too!
Good tip!
Glad it was helpful! Thx for watching!
very effective
Appreciate the comment!
Good vid…subbed!
Great video
Great idea.
Thanks! Appreciate the comment!