KZhead

How to easily remove tile adhesive from walls 98% don't know this

mac plastering
2023 ж. 11 Ақп.
82 427 Рет қаралды
Жүктеу

How I remove grout / tile adhesive the easy way quick fast still might be a little hard work but not as hard as scrapping on the dry hard tile adhesive this way was learned from hard work and sore hands arms and shoulders. As promised how I remove tile adhesive the easiest way I know so simple but took me a hard lesson to learn now I share it with you the water wets the tile adhesive soaking in and making it softer and less dusty when scrapped of using a sharp paint scraper some what a stiff one to. Doing it this way will cause less damage to the wall below making it easy to paint plaster if re tile again . yes it can be tiled or plastered over but not as easy and will take more plaster and adhesive to achieve a great result this way will save that harder work and give you that blank canvas you want... again this might not work on all wall tile adhesive as some are very water prof but worth a shot even if so and i wish you luck on your job be you a pro or DIYer #remove #adhesive #DIY this job is in a kitchen but could be a bathroom or any where that had tiles, How to easily remove tile adhesive from walls 98% don't know this
Spear and Jackson bucket trowel that is still going strong for me after many years = amzn.to/2pcpReS
Refina trowel pack and holder = amzn.to/33PbCvi
All amazon links are affiliated links will cost no extra to buy from but we might get a %
tools links direct
www.refina.co.uk/
Find us and like us here
/ macplasterin. .
Tweet us here
/ macplastering
/ macplasteringservices
our amazon store affiliate www.amazon.co.uk/shop/macplas...

Пікірлер

  • Going to give this ago in the morning thanks for the video 👍

    @davidmaguire8161@davidmaguire81617 күн бұрын

    • Best of luck with it buddy hope it saves you time

      @macplastering@macplastering7 күн бұрын

  • Thanks for the tip mate. Took me an hour and a half instead of most of the day!!👍

    @stevemendham342@stevemendham342 Жыл бұрын

    • Ye it is a time saver for sure still hard work but a lot easier glad it helped mate =)

      @macplastering@macplastering Жыл бұрын

  • Hey man, the audio in this video is a great improvement! Thanks for the tips! Much appreciated.

    @s2003katalin@s2003katalin Жыл бұрын

    • Thanks buddy :):) yea hard to make it better at times but hopefully worth it for the ones watching :)

      @macplastering@macplastering Жыл бұрын

    • my mic broke recently took me ages to figure it out thought it was me hitting a button on the camera but seems the mic must have a lose wire in it as it works sometimes or for a few seconds on each recording haha making editing hard

      @macplastering@macplastering2 ай бұрын

  • Omg thank you so much need walls ready for plasterer Tuesday coming got 3 clear days the old tiles I think they used a can per tile wetting it with warm water bit of liqued in and bingo. If you was here I would give you a big hug need to crack on thank you so much you are a *🤗

    @janefarquharson9394@janefarquharson9394Ай бұрын

    • So glad this has helped you my friend do share if possible might help a few more. Thanks again Jane and best of luck

      @macplastering@macplasteringАй бұрын

  • I brought a big heavy duty scraper to do mine. It didn’t touch it. See your video thought no way on my adhesive but I’ll try it. All done in an hour and a half, finish is almost good enough to fill and paint. Thanks

    @niallelleray4344@niallelleray43444 ай бұрын

    • Nice one mate yes I learned this the hard way but so glad i found out a little water goes a long way with it :) So happy it has helped you mate :)

      @macplastering@macplastering4 ай бұрын

  • Great help 😊many thanks for sharing this with us 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

    @edmundeverett2938@edmundeverett29383 ай бұрын

    • So glad it helped you mate 👍

      @macplastering@macplastering3 ай бұрын

  • Wish I had seen this when I was redoing my bathroom years ago 🤦🏼‍♀️ We just replaced the dry wall ugh. Oh well know for the future. Thanks so much for the tip. Appreciate it!

    @patriciafoxxy1986@patriciafoxxy198610 ай бұрын

    • It don't always work depends on the adhesive but yes some times rip the whole lot ot best thanks for watching and commenting 😊

      @macplastering@macplastering10 ай бұрын

  • Great to see you still posting. 👍

    @charliemccollum@charliemccollum5 ай бұрын

    • Thanks for stopping in mate yea been thing about a few livestreams again

      @macplastering@macplastering5 ай бұрын

    • Unfortunately the adhesive is from 80s in our house and is set like concrete 😂

      @charliemccollum@charliemccollum5 ай бұрын

    • yea unfortunately this wont work on the water proof types is yours the grey cement type mate? best using the drill the to chip that gear hard work @@charliemccollum

      @macplastering@macplastering5 ай бұрын

    • @@macplastering it was on plywood that was attached to a bath frame. Then tiles on top of wood to close in the bath

      @charliemccollum@charliemccollum5 ай бұрын

    • @@charliemccollum ahh yea can picture that nightmare now tearing sheets of timber off with tiles might be best pull sheets of and re board if you have the money to go that way

      @macplastering@macplastering5 ай бұрын

  • Top man... That works! 😊

    @paulcallan3621@paulcallan362111 ай бұрын

    • Glad to be of some help m8 and feel free to share to any1 it might help out thanks again for watching and commenting mate

      @macplastering@macplastering11 ай бұрын

  • Cheers. I enjoyed the origin story too 🙂💪

    @aninterviewwith...1702@aninterviewwith...17028 ай бұрын

    • haha thanks :) yes still have those blisters haha but in all serous got some blister on concreting the garage floor today too .... thanks again for commenting

      @macplastering@macplastering8 ай бұрын

  • Wow that's is amazing 👍👍

    @user-zj5nk7qv2w@user-zj5nk7qv2w9 ай бұрын

    • Cheers buddy glad it was helpful 👍

      @macplastering@macplastering9 ай бұрын

  • Big help!

    @VaQm11@VaQm11Ай бұрын

    • Brilliant to hear my friend pls do share with others if possible 😀

      @macplastering@macplasteringАй бұрын

  • How do you take off the old tile glue it’s brown in color and do not come off easy with xtra course sand paper and orbital sander any suggestions

    @joestagner7817@joestagner78176 ай бұрын

    • Might need a sharp scrapper is it rubbery?

      @macplastering@macplastering6 ай бұрын

  • Hi mac plastering. Would water in a spray bottle work instead of brushing it on? Thanks Nick

    @uksglory@uksglory3 ай бұрын

    • yes or a sponge or cloth

      @macplastering@macplastering3 ай бұрын

  • I'm surprised it just melts after a few minutes when you add water. So any leaks in the grouting and they all fall off?

    @tommorley7889@tommorley788910 ай бұрын

    • I would think it would be bad in the long term for sure again some advises are weaker than others as in not as water proof

      @macplastering@macplastering10 ай бұрын

  • I'm going to try this today, I will let you know how I get on - Thank you

    @ucandance8376@ucandance837610 ай бұрын

    • Hopefully you get same results my friend so adhesives are stronger but hopefully you have similar

      @macplastering@macplastering10 ай бұрын

    • Hope it worked well for you

      @macplastering@macplastering2 ай бұрын

  • So does that hurt the drywall, getting it wet? How long did it take?

    @cindyk4145@cindyk41454 ай бұрын

    • still hard work but much eaiser this way cant remember how long this took maybe and hour or 2 as long as you don't go to mad with the water shouldn't be to bad might soften your drywall plaster a little to but no doubt wall will need replaster tiles or patched after all the same

      @macplastering@macplastering4 ай бұрын

    • @@macplastering i got told they would have to tear our my walls for a glue up bathtub shower surround. My tiles are plastic, but some are falling off….from the 70’s i think.

      @cindyk4145@cindyk41454 ай бұрын

    • @cindyk4145 just make sure they are not asbestos as you will need to realy protect your self if it is

      @macplastering@macplastering4 ай бұрын

    • @cindyk4145 but yes sone times it's just easier to pull boards of and start a new

      @macplastering@macplastering4 ай бұрын

  • Thanks for sharing. Mary my job a lot easier.

    @learntodance6832@learntodance683215 күн бұрын

    • So glad it's helped you my friend do feel free to share it on if you think it could help others 😊

      @macplastering@macplastering15 күн бұрын

  • warm water with a splash of PVA , always seemed to help with polymer adhesives.

    @user_unknown1488@user_unknown1488 Жыл бұрын

    • Yes makes it soak good just to tight to waste it me :):)

      @macplastering@macplastering Жыл бұрын

    • @@macplastering haha.. plus you got to get the bits up quick before they stick to floor

      @user_unknown1488@user_unknown1488 Жыл бұрын

    • Thats so true mate just made it sticky again :):)

      @macplastering@macplastering Жыл бұрын

    • I add a bit of pva as it seems to stop the water running down the wall holding it in place as it soaks in. If you get lucky an old plastering trowel does the trick but if it’s a little bit tougher the small scraper is way easier on you body as you demonstrated.

      @tracer1127@tracer11272 ай бұрын

    • yes would work 100%

      @macplastering@macplasteringАй бұрын

  • Hi, what about on a concrete wall? Im using a grinder and dust is everywhere

    @firehawk95666@firehawk95666Ай бұрын

    • Is the adhesive white ? just give it a test like on the video nothing to lose hoping it works for you my friend :)

      @macplastering@macplasteringАй бұрын

    • @@macplastering yes it's white but the wall is concrete, and thanks for the reply

      @firehawk95666@firehawk95666Ай бұрын

    • Should work as long as it soaks in the water ? did you try it mate ?

      @macplastering@macplasteringАй бұрын

    • @@macplastering gonna try it today barely

      @firehawk95666@firehawk95666Ай бұрын

    • the best stuff is warm water with some soap in as or a steamer but steamer can take the skim off but if yours is just adhesive on concrete should be good to go

      @macplastering@macplasteringАй бұрын

  • Nice title. Made me wanna see how 😂

    @squidlings@squidlings Жыл бұрын

    • Now you know m8 =)

      @macplastering@macplastering Жыл бұрын

  • 1/4" drywall and done

    @TrashyLobster@TrashyLobster3 ай бұрын

    • Nice

      @macplastering@macplastering3 ай бұрын

  • Does it work on a concrete wall?

    @Latinsplaining@Latinsplaining2 ай бұрын

    • should do if its similar tile adhesive used

      @macplastering@macplastering2 ай бұрын

    • @@macplastering thanks

      @Latinsplaining@Latinsplaining2 ай бұрын

    • Anytime my friend

      @macplastering@macplastering2 ай бұрын

  • Can't believe no one knows this . Know this many moons ago. But gd job in making the video

    @justinwalker5237@justinwalker52379 ай бұрын

    • some don't i learnt it myself when was young on a job haha thanks for watching buddy :)

      @macplastering@macplastering9 ай бұрын

  • Took me 2 seconds to notice that could have been scrapped off with a spoon. Good luck

    @cm7846@cm784611 ай бұрын

    • Only after not before

      @macplastering@macplastering11 ай бұрын

  • Try a steam cleaner

    @annon4350@annon43502 ай бұрын

    • Yes or wall paper steamer should work only thing is don't hold it on to long of blows the plaster of the wall thanks for watching ad commenting mate

      @macplastering@macplastering2 ай бұрын

  • Don’t work if it’s waterproof

    @PaulAnthonyDuttonUk@PaulAnthonyDuttonUk6 ай бұрын

    • Yea I did say that buddy that's the ones that need plastered over unfortunately

      @macplastering@macplastering6 ай бұрын

  • less work if you just use a steamer

    @meganconnell-cox6425@meganconnell-cox64258 ай бұрын

    • possibly but like i said in video more chance to blow the skim coat off the wall to

      @macplastering@macplastering8 ай бұрын

  • My adhesive is like concrete. Water does nothing.

    @StickOnHair@StickOnHair6 ай бұрын

    • Unfortunately if its waterproof it won't work I have said that on this video your only option would be a hammer drill it's hard work mate wishing you the best on it

      @macplastering@macplastering6 ай бұрын

  • Huh? What did you say?

    @ScottDavis-di2wn@ScottDavis-di2wn2 ай бұрын

    • At what time mate

      @macplastering@macplastering2 ай бұрын
KZhead