Maximum capacity and shootability in an ultra-compact design for peace of mind on your next backcountry adventure.
The P320-XTEN COMP is the first carry-length P320-XTEN from SIG SAUER, and it incorporates slide-integrated compensation for the ultimate 10MM carry package ideally suited for backcountry hunters, hikers and fisherman.
The XTEN slide is the equivalent length of a 4.25” barrel but is instead equipped with a single port compensator integrated into the slide and paired with a 3.8” bull barrel that allows for maximum shootability.
P320-XTEN COMP Features:
• Single Port Slide-Integrated Expansion Chamber for Recoil Mitigation
• All-New XSeries Carry Length Grip Module
• XSeries Flat Trigger with 90-degree break
• (2) 15rd Steel Magazines
• XRAY 3 Day/Night Sights
Learn more: sigsauer.com
I got one last week this gun is amazing for a 10 mm. The recoil is very tame and it is so impressive that I can’t even believe it.
Outstanding effort just got one and it’s very accurate and reliable. Controllable and handles everything.
Based
One of the most underrated pistols just got better! Love it!
*overrated
December 2023 I went to my local Gunshop to make my first pistol purchase. I wanted the P365 Macro . They didn't have any P365's and couldn't keep them in stock. They did have one Wilson Combat P365 X. Once I held it , that was it. I bought it and now have roughly 1300ish rounds through it , thus far not a single hiccup. I dont have anything to compare to but ,I love it. Now Im looking for a woods gun and I believe this will be my next purchase.
I bet they’ll release an xten txg then an xten axg, then an xten Axg legion. Gotta milk everyone’s wallets lol
I mean they are in the business of selling guns correct? 🤡
@@mauricemaurice123 oh don’t get me wrong dude I buy all their shit 😂
Can't use TXG with 10mm, it's too weak
@@capeace13 it’s not too weak it’s just not compatible. A tungsten grip module is definitely stronger than a polymer one, the FCU just doesn’t fit it.
@@NotAnOperator442 I asked about the possibility of getting a TXG grip last year when I was at the academy in NH. The Sig employee I talked to told me that the polymer grip is stronger than the TXG & that the TXG will break with the high power of a 10mm or .45. The only options for a heavier grip would be steel or stainless. Oh & by the way the FCU will drop into a TXG grip. The only thing that doesn't fit is the magazines
Make a ported p226, p220, or p229. Some of us are still fans of the retro digs ya know?
They will soon sknce they just released the 226 XFive legion like 3 weeks ago just a few months after the AXG Legion with the comp
I cant wait for the X10 Comp AXG legion macro AXG marcro comp edition....
Looks like a winner!
Need that comparison against standard xten
Throw in a steel grip module and you've got a deal!
We want flared magwell for the standard X10 and a legion package (grip module + slide)
Gray Guns
Oh cool another version of the 320.
Ordered! Been waiting a long time for the compact 10mm
I cant find holsters anywhere. Any ideas?
Muddy river holsters
right on
Sig please make a factory threaded 10mm barrel and XTen compact!
What’s the benefit of suppressing supersonic rounds? Just curious.
@@AlabamaPilgrim333 The Truth, never suppressed 10mm would love to try it even though they don’t have factory subs right now, sage dynamics tried it on a fn 510 and he surprisingly liked it, another reason to suppress 10mm is for hunting, for everyone that uses a 10mm for handgun hunting.
@@AlabamaPilgrim333suppression of sound
@@bruceflaws3213 ahh. Of course.
Man, this thing is going to hit HARD
Yea into someone's thigh 😂
How hard?
The recoil is gonna make FBI agents cry and cry
I’d buy this just to get me into hiking / backpacking / hunting more
This is the Big Bang. I am a 10mm Channel! Awesome!
Nice!
Top !! Tenho uma mas é a nitron
Very nice... Bring us an XTen Legion package
Great Stuff '' 💯💥💥💥💥💥💥💥
I was so excited until I saw that it has a full size grip height. Someone in the industry needs to make a 5” grip height 10mm pistol, probably with a 13 round magazine. If executed well this would be my “one pistol” for everything. The Springfield XDm and Glock 29 are too short and all others are too tall. I do love the idea of an integrated compensator though. That’s a first with the 10mm’s.
It will probably happen
I just hope the reliability is better!
Nice 😊
I'm buying this soon as it hit bass pro
When?!!
Wilson combat grip module work for this??
WOW
When will these grip modules be available for sale?
Cool handgun that, unfortunately, I can forget about having.
yeah, being a felon sucks.
If love to be able to by just the slide, i have so much money tied upvin all the cinversions and grip modules
Is there a 40S&W model in the men's department?
Can the original version be modified into this size and comp?
Is this powerful enough to stop a Grizzly?
Can I put full size xten slide on this new carry grip module? I like more slide showing so mix and match would he great.
It's a modular gun so what ever floats your boat
@capeace13 cool wanted to make sure the full size slide wasn't so long that there was a gap where bottom of slide meets carry size frame
Take my money!!!
20+ rd magazines! FN has factory 22 rd magazines and they work well!
Aluminum frame for this one too please. Standard full length barrel without the comp while you're at it.
...defeats whole purpose of gun design
M.U.S.T have accessory: mag-well extension for those of us with larger hands. I EDC my P320 XC but I HATE firing it. My pinky ALWAYS comes off the grip after EVERY shot! *By me making this comment, they (NH Corporate Store) will know who I am.
You know the x compact has a shorter grip right? This is an x carry.
I would like to have the carry grip for my X10
It's just a shorter dust cover
I’d buy it, if it wasn’t for the stupid mag ban in WA #fuckinslee
Would love to find one with a manual safety
Doesn’t exist but you can install one, and notch the grip.
Why?
Converted my M18 fcu to a 10mm fcu and kept the safety
@@reekgoesoutside the kit to add a safety to a XTen FCU is only a hundred bucks…
@@alexander393Preference?
Will it run 220 grain hard cast worth a shit?
What COMP stands for?
That "compensator" will be a great trap for pocket lint or holster junk. Barrel obstruction at a critical moment?
Wtf is wrong with your cloth that it's covered in loose lint lol Also the bullet expansion is going to burn through that
you must not inspect and clean your firearms
I like the 17 rd mags . ❤
There are no 17rd mags for the xten.
Needs an axg type grip
So you can feel the cold metal when hiking in winter in bear country? This makes no sense.
@@PD-we8vf because that’s it’s only purpose, right. Stop your nonsense.
There will never be an axg 10mm. Alloy qnd 10mm dont mix.
Stainless XG
💙
10mm conversion kits for the P-320 X-5 Legion 😎😎😎😎
Make a 320 45ACP carry comp
Legion, please.
Personally, I want a thumb safety on this.
is there a hammer fired model?
P220
thank you.@@capeace13
45acp.
it's 10mm. please pay attention.
So shooting a full power 10mm load out of a 3.8” barrel… at one point would a larger 9mm+p / .45acp+p produce the same or more FPE in a slightly longer barrel? I love my full size 10mm (G20) and this new entry looks great… but you need the extra barrel length to get the round to the FPE to hit like it reads, right? Why want extra recoil, slower follow-up shots in a caliber that (in shorter barrels) would break even with + P rounds? And why want a “threaded barrel” version if 10mm will always be a supersonic round? 🤷♂️
Give us a magwell, threaded barrel, and possibly a compensator.
Grayguns has a magwell AB prototype has threaded barrel & comp
@capeace13 well hell, thank you! Now all I need is to find a magwell for my FN 510. Ugh.
Faaaawk, imagine taking a 10mm to the thigh from it going off by itself 😂
WHAT. IS. THE. PRICE. SIG.
MSRP?
My guess is this will come in at around $900-1000
When is the MCX Spear 6.8x51 coming out?
Considering most people would get this as a bear gun, etc. for outdoor adventures, why not make it in fde or some other blending color? Black only? Even Springfield is ahead of you, Sig. Disappointing
Tha look's amazin, but I can't help but think that high bore axis is gonnabe "problematic"...
Back in the 80s and 90s we carried 44 magnum revolvers in the back country. They worked just fine. Have you checked out the bore axis on one of those?
@nickspizzaparlor They din't know any better back then. Now we DO! Gottasay, I'm not generally a fan of "reimaginin" sh*t, but Chiappa really figured that sh*t out. Now, I ain't too keen on revolvers, n my pockets'r rather shallow, so even if Luago did'a BIG-BORE "Alien", I cun't affordit. But! Tha "regular" mfgr's could, at least makit look like they took the "Immutable Laws" into account, when designin newer models...
msrp of $950....going to have to pass at that cost.
Sub compact ........or compact would be sweet
but has the accidental discharged been fixed ???????????????????????????
Those discharges were from dumb cops using the wrong holsters.
Nice idea, but not a true comp. Need to actually have the barrel the same length as the slide and port both. I know there's some complaints about the flash from the XMacro 9mm comp distorting the line of sight with a fireball. I can only imagine, from my experince with 10mm, this is going to look like a volcano. No to mention if actually using this with a HOT 10mm load for wilderness self defense........FLAME ON!!!
I'll stick with my p365 x macro comp w 17
We have been looking for a more modern 10mm that’s modular. Very interested, is there an agency sales rep email?
looks great, but have you corrected the accidental discharge issue?
There is no accidental discharge issue.
@@RedRider2001, tell that to the hundreds of registered complaints
There is no discharge issue.
@@emmw7794, dozens of military & police are just shooting themselves?
@@googoo-gjoob No one is shooting them selves except LEOs who pull the trigger or improperly holster it. In one of the videos you can even see the Trooper pull the trigger when getting out of the car. So yes. Out of millions and millions of p320s a couple of NDs, is user error. The gun won’t go off. Not even if you hit it with a hammer.
What’s the price point $200,000?
Cool, but can you drop it?
Great now stop ducing around and give us a 10mm rxp and a macro rxp
Little freakin’ thumper right there. I just wish ammo wasn’t so much. I have No interest if I can’t put 500 rounds a month through it without going broke. 😂
Not that expensive man.
@@emmw7794 well I won’t spend more than 25 cents a round so I’d say it’s expensive.
@@jagpilotohio So you don't shoot anything but 9mm? .300 blk and .45 are both more expensive.
@@emmw7794 9 and and .22lr. About 1000 of each per month. The .45 and the .40 and the 5.56 and the .357 and the .44 mag. Pretty much just sit in the safe now…..although I did find a store blowing out .40 cal. at .15 cents a round two months ago and bought all of it.
@@jagpilotohio You can shoot .40 out of these if you really want to. But 10mm bulk is usually .50 cents a round which is cheaper than .300 blk
Not for me
Meh.. cz shadow 2 all the way.
one of the most dangerous for its own user's pistol company.
Negligent discharges from dummies using the wrong holster.
INSANE COPIUM@@johnhatchel9681
SIGCOPIUM@@johnhatchel9681
How did yall come out with a new x10 comp if you still can’t get the first x10 right? It has way to many issues to look past it all and yalls service sucks!!
👎🏻Slide the size of a schoolbus
All you guys do now it seems is just keep making the same two guns over and over again with slightly different features than the last and act like you’re changing the game every time. Come on sig you’re better than this. Do t be like Glock.
6mm wider than the Glock 19...
Which is a 9mm… Compare it to the Glock 20 (10mm) which is only 2mm narrower.
Haha they said Glock 😂🤣🧐
Remind me again of when the glock 19 came in 10mm?
Really unfair to announce this just hours after the P365 Legion 😢
SICK!!! ANOTHER GUN THAT GOES OFF BY ITSELF??