These Are The BEST DRYWALL ANCHORS EVER! (Homeowners + DIYers Should Keep These Sheetrock Anchors!)
Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Qualihome Self-Drill Anchors 25pc:
amzn.to/3WBrL3B
Toggler Self-Drill #6-#10 100pc:
amzn.to/3NCaumx
Ansoon Metal Self-Drilling Anchors:
amzn.to/3zMasDb
Kurui Self-Drill #8 50 pc.:
amzn.to/3WyWwpz
Klein 11-in-1 Screwdriver:
amzn.to/3hfzpQI
Dewalt 20V Drill + Driver Combo:
amzn.to/3Uc63kY
Black + Decker 20V Max Drill (highly affordable):
amzn.to/3hcY5JI
(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
Check Out Our Other Drill/Mounting Videos:
Punch Before You Drill!:
• Before You Drill Wood/...
Don't Use Drywall Anchors!:
• DON'T USE DRYWALL ANCH...
These Are The BEST DRYWALL ANCHORS EVER! (Homeowners + DIYers Should Keep These Wall Anchors Around)
I don't use drywall anchors often. As I've said on the channel, I feel that they sometimes give people a false sense of confidence that what they're mounting to a wall is truly secure.
BUT, sheetrock anchors can be very handy for small, lightweight wall-mounting. And when I need to use them, I always reach immediately for SELF-DRILLING DRYWALL ANCHORS.
Self-drilling sheetrock anchors come in plastic and metal. I prefer the plastic anchors.
They're screw-shaped, with a sharp point on one end, and a phillips slot on the head. To install self-drilling anchors, you simply press them to your drywall surface and turn them with a SCREWDRIVER, or DRILL, or DRIVER.
The point acts like a cutter head, boring through the drywall paper. When it punches through, the anchor sinks to the threads. As you turn it into the drywall surface, the threads bore their way in, cutting their own channels.
Drive until the drywall anchor is flush, then stop!
Be sure to use the supplied screws. These have the right gauge and thread count for the sheetrock/drywall anchor in question.
That's how you use self-drilling drywall anchors!
THE HONEST CARPENTER
Logical explanation. Rational people don't expect drywall to hold the weight of wood, steel, or concrete.
I’m always telling people to lower their expectations a bit for anchors, Nemo 😅
@@TheHonestCarpenter YES! That seems to be a part of human nature in almost everything we do or think we can do. Your comment (at the 30 second mark) about giving people a false confidence says volumes.
@@TheHonestCarpenter I think lowering expectations in general is good advice for homeowners. Especially those who dabble in DIY (myself included).
I found these last year and never went back. Absolutely love these!
No doubt the Pros love these. If you want to get in, get out, and get paid they're fast, neat and work reasonably well. But in MY house I'd never use them for anything where the load is variable (shelves, towel bars, TP dispensers) the hole will enlarge and the anchor may fail. Toggle bolts can be a pain but they're forever.
I really love this type of anchor and use them often but thanks for the additional info you provided on them as well as the comparison to other anchors!
They're all I've used for the last 20 years or so. They just always seemed to be superior to the others - glad you agree! lol I typically drill a small starter hole first though in case there's a stud at that spot.
Good call, Phil! 😄
Too funny. Fastest way to find a stud is to try to use one of these things. :)
So you don't have to change between drill bit and screw bit, we would carry an ice pick with a big headed handle that had a short tapered shaft. Give the pick a quick pop on the head with your hand and it would push right through gypboard. Much faster and would make a nice starter hole.
I have used these anchors for years and never had a problem. Great product. Love you channel.
I'm an electrician, I prefer the metal version, specifically the Metallics brand. Toggles do have their place. The right fastener for the right application!
I am glad I watched this video. I have always wondered about this type of anchor which I have used a few times in the past. I was amazed how easy they were to use. Now that I know they are strong and rated highly by you they will be my go to anchor for drywall from now on. Thanks again for making these great videos.
Totally agree. Great choice for lightweight items like towel racks.
Nice to have you reinforce the use of what I've been using for a long time. Thanks for keeping us educated!
Perfect tutorial video! No nonsense information, and all of my questions were answered without me asking. Wish everyone made tutorials simple and straight to the point.
For a long time I was frightened to anchor anything onto drywall (I used to live in homes with brick walls). I bought these and it took me a year to find the courage to try them. After so much research so far so good. I haven’t used them for a TV but for pictures and paintings, yep. Great video. 👍
I’ve been using them forever, I’m glad to hear that you agree with me.
I always get very helpful and useful advice which is clearly explained from your channel, thank you Ethan.
I totally agree I use them all the time in my house they work well on plaster walls also and they are super strong
I'd never recommend these for frequent use items like towel rails although they can work. However, they can eventually break out of the gypsum if they are subject to repeated rough and tumble - people can bump into towel rails for example and towels can get caught on the rails and be subject to tugging by rough folk. Better to install timber blocking at the building stage if you can.
I agree. I've used a half dozen different types of drywall anchors and the kind you're showcasing is my go-to.
Strong and quick to install. And above all reliable.
Of all the drywall anchors I have used over the years, I agree this is the BEST one. 😊
I never start them on their own because I’ve had them break off. Take your #2 Philips screwdriver and put it through the sheet rock with your palm first, anchor starts perfectly square then. Also, I sink them by hand too, more control.
Agreed 100%. I find it easier to work with when you pre drill the holes.
Been using them for years now, my favorite
Agreed -- wide thread anchors are the best. I have never regretted using them, and never regretted go up one level in weight rating.
I've been saying similar things for years! They're awesome and I always keep them on hand. I also keep the steel versions on hand in case of a stud in that particular spot..
These have been my favorite for years.
I've been using those EZ drywall anchors since the performance videos on Project Farm's stress tests. I use a drill to mark a pilot hole with a 1/8 drill bit before I insert them into the drywall, to make sure there are no studs. I feel like it should also be mentioned that they give a resounding "click" when the screw is driven into the anchor, noting the expansion of the anchor into the sheetrock. It gives massive peace of mind when that click happens, as I know it's properly installed.
I completely agree. Been using them for over 10 years
I'm just a casual DIY'er and I did not know about these! Thx
Your so right they are a great product for lightweight hangs I use them a lot in the shop
Great video, have used many different kind of drywall anchors over the years, which I've found to work but require more work, right drill bit and screw size. Will definitely give these a try. Thanks
I discovered these years ago and they're all I use.
I totally agree with you over the best that I use them in years. I well most trusted this items
You are 100% correct on these anchors. They are the best thing since sliced bread!
They are pretty much my go to for everything i hang, unless I have to hang something much heavier than i'll go with toggles. I try when ever possible to have at least one stud to drill in (like a long shelf or something). Like you said, the ease of use and cost makes this a no brainer. Though I will say, if they are too cheap, the tip will sometimes just bend or crush on me and I have found putting a small pilot hole (sometimes even a wack with the screw into the wall first) helps a lot.
Great and practical video. By the way! I love your workshop!! Love how organized it looks.
I have been in construction for 30 years and the only thing I would use these for is pictures and other very light use stuff. For things like towel racks asd TP holders, I will only use the flip-toggles. I would trust flip-toggles in 5/8 drywall to hold a TV bracket.
I used 8 of these in a Florida home to mount a 65in tv on the wall. Been hanging on that same mount for 2 years.
I've been installing cameras for a bank for 6 years. Every existing DVR (which are pretty heavy) I run across is installed on drywall using the metal version of these anchors and I've never seen one fail
I think that you are right to endorse these. I have had great success with them. I always start the anchor by driving it in the 1/4" or so, as you showed by hitting the back of the drill.
Thank you for the tip on using the screw that comes with the anchor. Prior to your advice I had planned to use a different screw.
I totally agree with you in love using these anchors
I 100% agree. These anchors are great. I have that as long as thread size is the same I can use bugle head, flat head or any other type fastener as well. Again, as long as the thread size meets the requirements of the anchor.
I agree for anchors this type are the best type. 👍🏼👍🏼 For pictures I like to use the wire picture hanging hooks. These carry a surprising amount of weight. Easy install, easy removal and wall repair, and they are reusable. Like wall anchors they don’t work on studs but like with wall anchors if you have a stud there much better choices.
Yep those are the best. Pros use those only. Still best to pre drill with 1/4" bit first as the tip sometimes breaks off especially if you hit a tape joint. Using those anchors with a truss head screw is money in the bank.
Been using these since they came out! Great design! Thanks!
I was fortunate enough to find this type of anchor many years ago and haven't looked back since.
In the UK, we hate these things. The best wall plugs grip from behind the wall. Lightweight - Fischer DuoPower 6mm or 8mm. Heavyweight with no brick - Snap toggles Heavyweight with brick - CoreFix.
This is the way to go. Especially for applications that see constant use/vibration like toilet paper holders
I tend to prefer the kind that turns into atoggle only because they need a smaller entry hole and I often need to go through a hard wall covering first - like stainless steel or FRP. I'll carefully drill through the hard material then insert normally.
Thanks for that I jave some of these in my tool box for years they are strong
I've used these religiously since they were first introduced into the market. We've bought and sold 7 houses through the years and I've used these things for everything. One thing I do before before using one is use the screw that comes with it to screw a pilot hole where the anchor will be going so as to make sure I'm not going to be hitting anything with a plastic anchor and make a mess of things. Yes I could use a stud finder but this is just as fast and it's one less tool I have to carry around. Thanks for the video buddy. 👍
I have been using these drywall screws for years and they are well worth it. My new house has plaster walls and these don't work. The Toggler snap toggles are amazing for plaster walls and as shown on the project farm channel they are very strong.
Ethan, I have seen these and never realized they were self-tapping. Used the toggles for years and they are a pain compared to this. Thank you!
Love your practical tips.
You don't have to use the supplied screws with the EZ-Ancor type wall anchors. As long as it's the same diameter screw, you're fine.
This is helpful. Do you think coarse versus fine matters significantly? I need to use a wider truss head screw for a bracket hole that's slightly too big, but though screw diameter is the same (#8), it only comes in a coarse. Think I'm alright?
Thanks, you’re short to the point & always crystal clear !
Thanks for watching, Pauline!
100% agree that these type of anchors are the all-around beat for every reason you mentioned. When possible, if something needs two anchor points and does nit span 16 inches, I try to hit a stud with one side and use one of these on the other. Very secure! Thanks for the great advice you provide on this channel.
I love those Anchors, those are the only ones I use!
I love these things. They're so much easier to use than toggle bolts or old school drywall anchors. Another really great video.
Very helpful. I live in an old house and know nothing about construction and everyday small handy work. The walls home aren't made of gyps but plaster on 1 1/2 in. wood planks. Anything I drill will make that plaster crumble. These anchors is less damageable. Thanks again
Thanks Ethan, much appreciated
No pre-drilling, good hold strength, little tearout. Trifecta
PERFECT EXPLANATION
Amazing video. I love fasteners. Please do more and dive deep.
As always, very good subject. Thank you Ray
I used to work at one of the big box stores and, as you mentioned, there were a lot of different anchors to choose from. But I looked at what our contractors used most often, or the installers who did the finish work in bathrooms etc (towel bars, toilet paper holders, etc) and these were by far the ones they always selected. Now this is all I use at home as well.
This is what I do for a living but commercial stuff you find in hospitals and public restrooms. These screw-in anchors are great and fast but only for light duty stuff. You are still only relying on the strength of the drywall to support whatever you are attaching. We would never use them from grab bars, towel bars, toilet paper dispensers, anywhere where someone could put their weight on them.
@@chrisanthony579 So what do you use instead?
@@sparker7768 Depends on what I'm attaching, how many anchors I can use and assuming drywall. A floating shelf where I have no idea what weight will be put on it or a grab bar where someone is using it to support their own weight.... I'm cutting the wall open to install wood blocking/grounds. A towel bar or shower curtain, I'm probably using some type of toggle anchor. Light stiff like a picture, the screw in anchors (metal) work good but again...need to remember the anchor can only support what the drywall can support. Whatever attachment method I use, I become liable if something fails.
I actually have drywall anchors myself I didn't know what they were for but thanks for the video 😄
Been using this exact anchors for years and I feel validated lol
Work great and are fast for heavier I always use the Rawlplug wall anchor with the gun ..can take a radiator
As someone with an older home and several coats of paint/skimcoat, the plastic ones never worked on my walls at all, they would always bend and break, even with a bigger pilot hole. I switched over to the metal ones and haven't had any issues since.
Thank you! That makes a lot of sense, and I've never used a drywall anchor I liked. I'll give these a try. Judging by the comments, you're in agreement with a lot of people who know.
I really enjoy all of your of your videos👍👍 But after 30 years in the communications game I have to say that Ramset Hollow Wall Anchors are far superior to any other. Proudly made here in Australia 🙂
Great video and I love these things! They are really good.
Another great video! Even though I'm very familiar with some of the topics you cover I always end up learning something. Great job!
extremely helpful. thank you!
Thank you so much you will not believe how helpful this is Hello From the Isle of Man
Thanks for the tips!
Good video once again- thank you
Thank you this is helpful.
I will definitely try these ❤thanks so much
Excellent! Thank you. 👍🏻
Nice video, direct and to the point with good theory. I really enjoyed. I am your newest subscriber haha
Thank you!!! Now I can move on with my project 😜😜👍🏼👍🏼👍🏼
I picked these up a few years ago when I needed to hang some heavier hardware at a business. After using them, I went home and threw away every other misc. drywall anchor that had made its way into my toolboxes over the years! They don't always work great as I get some that self-destruct before they get through the drywall (I appreciate the tip to give them a smack before starting; that should save some anchors in the future since I always use an impact driver), but they're still such a huge improvement that it's no contest. It's also a nice bonus that the Toggler brand Snapskru is made in the USA.
I hang pictures, mirrors and shelving as a "side business" of my Blind installation company. I use these anchors almost exclusively and I love them. I appreciate your video and I agree with everything you said. The only tip, if you could call it that, is . . . when you are drilling into a wall to hang a mirror, you don't always need an anchor, if you hit a stud. So, once I have my drywall marked for hanging, I run a 2" screw into the hole first. If I hit a stud, I'm done. If I don't, I back the screw out and put in an EZ Anchor right into the hole I just drilled with the screw. This is easy and fast, and I don't waste an anchor if I don't need one. :)
Awesome tip! Thanks!!
I've had good luck with those hammer in fluorescent yellow ones when installing IKEA closet systems. I like them because you can very accurately place them. Yes... Studs are way preferable but not always possible. I've considered ripping all the drywall out of my closet and replacing it with a double layer of three quarter inch plywood.
The best anchors I’ve used are Rustark drywall anchors. They are the only thing I use now. All you need is a hammer and screw driver. Hammer them in and they go in easy and are easy to take out. if you do take them out they don’t leave much of a mark. I hope you work them into your comparison even if you decide they are not for you.
Project Farm did a big test on drywall anchors. It’s worth the watch. Especially if you are using these frequently if your a handyman or something. After watching the video I went out and bought a bunch of different types and sizes and got a DEWALT small DEWALT tough box and built a kit cause P.A.P. Professionals Are Prepared.
I'll have to try these at some point. For anything outside of a picture, I generally just use Toggler plastic toggle anchors. I have little kids that, like most kids, are rough on things and the extra weight capacity means it's less likely to fail. The only downside is that it doesn't sit 100% flush.
Helpful! Thank you
Why do they even make towel racks that are not set up for 16” OC layout? I have noticed for people who are elderly or disabled any towel rack becomes a grab bar, when they are about to fall. Every towel ought to be a grab bar. Therefore, they should be mounted on a 16” layout. In other countries do wall layouts follow a metric layout?
Thank you!
good info. Ive been rebuilding using fiber drywall which is vastly superior in terms of strenght compared to conventional drywall
Great info, thank you 😉👍
Great video, totally agree with these being a great design. One flaw is that you have to be very careful not to over tighten as that will make a larger hole in the drywall an decrease it holding strength.
The ones made of "plastic" are worthless trash... I assume you are referring to the metal ones?
Great video and tips. Thanks
I use these by the score. Couldn't agree with you any more on this one; perfect call.
Thank you.
It's weird, I've used these here and there over the past several years, but it hasn't been until now, after moving into a new build home, that I've come to think of them as the best wall anchors. So it's kind of ironic that you posted this particular video now. I usually put small pilot hole in the wall to get these started, though. I suppose I don't have to do that, but it seems to make it easier, and I can make the hole very quickly without rechucking my drill by just drilling a screw straight into the drywall and backing it out.
They’re definitely the best for new lightweight drywall, Kevin, which is indeed what is prevalent in much of the U.S. And a little pilot hole never hurts!
Another good video. Thanks!
These definitely are the best drywall anchors!
Personally i’m a big fan of the Snap toggle anchors
I do see those as being superior to old metal wing toggles, Victor. I’ll most likely mention them when I do my new brand anchor video-very convenient!