KZhead
Ғылым және технология

DOVETAIL CUTTER - EASY

Francisco Murcia Projects
2022 ж. 18 Нау.
276 622 Рет қаралды
Жүктеу

Learn to make a DOVETAIL CUTTER EASY WITH TOOL BITS step to step in a simple and practical way.
Everything is made with small machinery.
I ALSO RECOMMEND THIS VIDEOS
MILLING VISE HOMEMADE⬇️
www.youtube.com/watch?v=gi50t...
MILLING MACHINE FINAL⬇️
www.youtube.com/watch?v=ss0px...
HAND WHEEL FOR LATHE OR MILLING MACHINE - HOMEMADE⬇️
www.youtube.com/watch?v=0SW16...
ANEL GRADUADO STEP TO STEP - HOMEMADE ⬇️
www.youtube.com/watch?v=UqpN3...
Do not forget to subscribe and write any question to help you.
#Dovetailcutter

Пікірлер

  • Nicely done with a minimum of high accuracy tooling, good "seat of the pants engineering", something I've seen used around the world "to get things done" as needed. Thanks!

    @johnmcclain3887@johnmcclain3887 Жыл бұрын

    • Thanks friend for that comment really use basic tool. Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • A VERY USEFUL CUTTER. AND IT'S HOMEMADE, TOO!

    @kulebyakinjoe@kulebyakinjoe Жыл бұрын

    • Thank you for comment

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Great video, i made a similar cutter to remake the top piece of an existing dovetail slide. The part I don't understand is how you accurately grind the cutter angle so the part being made would fit any manufactured dovetail rail. I'm remaking a carraige for an existing male dovetail rail and found out it needs to be a lot more accurate than a lathe compound rest can provide. I'm out less than a 1/4 degree and trying to achieve final fit by hand scraping was an exercise in frustration. I ended up spending the $80 on a carbide dovetail cutter to keep myself from going crazy.

    @jefflyon100@jefflyon100 Жыл бұрын

    • Thanks friend for asking, yes it is a bit difficult to achieve the perfect angle, in this case 60 degrees. but I advise you to help yourself with a used cutter that has 60 degrees and use a face gauge to achieve the exact angle, and you can do it very well. thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

    • For your purposes buying was the best option. If you are making the male and female parts with the same cutter, then the angle isn't important.

      @markrainford1219@markrainford121911 ай бұрын

    • @@markrainford1219 Kind of true, but since you might have to regrind the tool during the job, there is some possibility / room for not so good fit. I expect there are dovetail cutters with changeable cutting tips these days?! That's the way to go unless you have a proper tool grinder - which extremely few hobbyists do.

      @andersgrassman6583@andersgrassman65838 ай бұрын

    • @@andersgrassman6583a lot can be accomplished with a bench top grinder and a proper jig.

      @ourtube4266@ourtube42667 ай бұрын

  • Good job mr. I will make this tool to. Thankyou for sharing

    @andriantoeko2895@andriantoeko28952 жыл бұрын

    • Thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

    • My project in my second chanel " andrianto blitar " Mr

      @andriantoeko2895@andriantoeko28952 жыл бұрын

  • Браво маэстро! Супер!

    @user-zj9et2yd4q@user-zj9et2yd4q5 ай бұрын

    • Спасибо, мой друг, за твой комментарий

      @franciscomurciaprojects2327@franciscomurciaprojects23274 ай бұрын

  • Very nice. And this would be very expensive to buy in USA if you could even find anything similar. I see that your toolbit appears to be ground with enough relief on the heel of the tool. To anybody without much experience I want you to be aware so the heel of the bit has adequate clearance. Thanks for sharing and greetings from USA!

    @channelview8854@channelview88542 жыл бұрын

    • Thanks for commenting, if indeed a very small space was left on the heel in order to displace the chip, it is 0.4 mm. Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Hola muy bueno el video. El torno lo hiciste tambien? Saludos desde Argentina

    @ricdom2305@ricdom23052 жыл бұрын

    • Gracias por preguntar, no, el torno es un emco compact 5. Saludos

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • świetna robota 👍👍

    @mrohny76@mrohny766 ай бұрын

    • Thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects23276 ай бұрын

  • excellent design and looks to work great. Thanks for sharing your knowledge with others, very helpful!!

    @kwaaaa@kwaaaa4 ай бұрын

    • Hello, thanks for commenting, that appreciation is valuable.

      @franciscomurciaprojects2327@franciscomurciaprojects23277 күн бұрын

  • ¡Buen trabajo y buen idea alomejor voy a hacer uno manana!

    @sandronewman2286@sandronewman2286 Жыл бұрын

    • Gracias amigo por comentar, claro buena suerte en su fabricacion. Saludos

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Good work

    @balakrishnanacharya@balakrishnanacharya2 ай бұрын

    • Thank you my friend

      @franciscomurciaprojects2327@franciscomurciaprojects23272 ай бұрын

  • Ferramenta eficiente, simples e de baixo custo.

    @franciscovalpassos3262@franciscovalpassos3262 Жыл бұрын

    • Gracias amigo, si sencilla y eficiente

      @franciscomurciaprojects2327@franciscomurciaprojects232711 ай бұрын

  • Show de bola mesmo hein laik grande tmjs

    @joseneriacoemel9825@joseneriacoemel98252 жыл бұрын

    • ok thank you

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Excelente amigo. Gracias por compartir

    @gonzalocamacho6971@gonzalocamacho697111 ай бұрын

    • Gracias amigo por compartir

      @franciscomurciaprojects2327@franciscomurciaprojects232711 ай бұрын

  • Good job 👍

    @bahadersingh8880@bahadersingh8880 Жыл бұрын

    • Ok thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects232711 ай бұрын

  • Nice post

    @rotating-alfadiq@rotating-alfadiq Жыл бұрын

    • ok thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Muchas gracias maestro por brindarnos sus conocimientos 👍

    @rolandolievanoagudelo.5112@rolandolievanoagudelo.51122 жыл бұрын

    • Gracias amigo por comentar cualquier inquietud bien puede preguntar. Saludos

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Your idea is brilliant and also how it was done. Congratulations. It was just the tool I needed. Thanks so much for sharing.

    @valentim75@valentim7510 ай бұрын

    • Ok thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects232710 ай бұрын

  • Excellent 👍

    @kumaresanr9321@kumaresanr93214 ай бұрын

    • gracias por comentar

      @franciscomurciaprojects2327@franciscomurciaprojects23274 ай бұрын

  • Excelente

    @josemanon6295@josemanon62952 жыл бұрын

    • Gracias por comentar. Saludos

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Nice design

    @parvizaghayarov935@parvizaghayarov9357 ай бұрын

    • Ok Thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects23276 ай бұрын

  • 5:40 I hear and feel vibration. Have you measured the runout and other things like bending the mill parts or its head ? Something feels like it's not sturdy enough. Or doesn't have enough weight

    @jw200@jw200 Жыл бұрын

    • thanks for comment. It may be that since it is only a burin then it generates a slight tapping when touching the material, otherwise it is fine.

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Super pomysł 👍👍👍👏🇵🇱

    @piotrnapieraa5422@piotrnapieraa54222 жыл бұрын

    • Gracias amigo. Saludos

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Nice video, thanks :)

    @Bianchi77@Bianchi77 Жыл бұрын

    • Ok thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • Menarik

    @PundhyLuzino@PundhyLuzinoАй бұрын

    • Thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects2327Ай бұрын

  • Muito bom 👍👍👍

    @damarcastro768@damarcastro7682 жыл бұрын

    • thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • At 1:55 you use a center ruler tool. How is it called and where did you get it from?

    @Dancer148@Dancer1488 ай бұрын

    • Thank you for asking, when you buy a universal square, it includes the square for centers. Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects23278 ай бұрын

    • @@franciscomurciaprojects2327 Thanks, didn't know it existed.

      @Dancer148@Dancer1488 ай бұрын

  • Excelente idea!!! Si duda la copiaré, los cortadores son muy caros y se parten fácilmente, saludos desde México maestro.

    @saulsalinas6419@saulsalinas64192 жыл бұрын

    • gracias por comentar, claro que es una buena idea y se puede hacer de cualquier medida. Gracias desde Colombia

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Классно получилось! А если использовать треугольные сменные пластины 16мм? 🤔

    @FunnyManNsk@FunnyManNsk6 ай бұрын

    • Спасибо за вопрос, конечно можно использовать треугольные вставки и они дают отличные результаты. Фрасиас

      @franciscomurciaprojects2327@franciscomurciaprojects23275 ай бұрын

  • Bravo Turkey İzmir selâm 👍

    @hayathayat1462@hayathayat1462 Жыл бұрын

    • ok thankyou for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

    • вещь пригодная в применении , но надо снять резец и нижний торец проточить на 2 мм и все будет окей, привет из СИБИРИ.лайк и уважуха неугамонным людям

      @user-uk7wl8hp7e@user-uk7wl8hp7e6 ай бұрын

  • 👍👍😎

    @erlyholguin9720@erlyholguin97202 жыл бұрын

    • Thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Thankyou ❤

    @qasimsakriwala@qasimsakriwala4 ай бұрын

    • Thank you my friend

      @franciscomurciaprojects2327@franciscomurciaprojects23274 ай бұрын

  • Esa herramienta golpea demasiado, lo ideal que tenga varios filos😊

    @user-pt7mo2yk2d@user-pt7mo2yk2d3 ай бұрын

    • Gracias por comentar, si por supuesto en materiales duros golpea un poco, lo ideal seria minimo dos filos, pero asi con un solo filo no hay problema en materiales blandos. Gracias saludos

      @franciscomurciaprojects2327@franciscomurciaprojects23273 ай бұрын

  • Muito bom.

    @edilsonmartins6653@edilsonmartins66534 ай бұрын

    • thank you for your comment

      @franciscomurciaprojects2327@franciscomurciaprojects23274 ай бұрын

  • hi, please can any one tell me the type of jaw chuck initially used on the clip

    @timothytorks2761@timothytorks2761 Жыл бұрын

    • Thanks for commenting, initially an ER 25 collet chuck was used and then to finish on the milling machine an ER 32 collet chuck was used. Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • not bad, but it should also have an edge on the bottom side or at least be completely flush with the holder, otherwise the tool will always end up rubbing the piece you are cutting

    @TheMadJoker87@TheMadJoker872 жыл бұрын

    • the tool protrudes 0.5 mm so that it can do the work on the part without touching the tool holder. thanks for the observation. Greetings

      @franciscomurciaprojects2327@franciscomurciaprojects23272 жыл бұрын

  • Keen job of making the tool but you didn’t dial in the angle on the cutter. The next piece you make after you hand sharpen the bit won’t make a part that will fit any previous parts.

    @ThisIsToolman@ThisIsToolman6 ай бұрын

    • Thanks for commenting, yes of course when sharpening you can lose the angle a little but the idea is to maintain it as much as possible, and then use a new dovetail cutter. Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects23276 ай бұрын

  • Для цветных металлов вполне пригодная штуковина! Хотя...

    @user-tc4mc8pi5v@user-tc4mc8pi5v2 жыл бұрын

    • Thank you

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын

  • so why did you make a conic tool if you could simply rotate the insert 45 or 60 degree? waste of time

    @absolute___zero@absolute___zero4 ай бұрын

    • Thanks, good question, but it was manufactured conical, so that when you continue removing material, the conicity or inclination of the piece to be manufactured will of course follow. Thanks greetings

      @franciscomurciaprojects2327@franciscomurciaprojects23274 ай бұрын

  • Барахло. Точность как на глаз ножовкой.

    @borys4456@borys4456 Жыл бұрын

    • thank you for sharing

      @franciscomurciaprojects2327@franciscomurciaprojects2327 Жыл бұрын
KZhead