Now that's the way a review should be. Show me the features - edited to bare bones. Nicely done.
@skigglystars9525 Жыл бұрын
Thank you 🙏
@dustylumberco Жыл бұрын
Hey Dusty, I love your channel it makes woodworking look very simple... :) Festool tools are extremely good quality and so smart but man they are so so expensive...
@gregorybrewer6776 Жыл бұрын
Thank you 😁😁👍
@dustylumberco Жыл бұрын
Too expensive for the average person
@spiketro Жыл бұрын
Yes, woodworking can be very expensive hobby. If you are not making money from it you can as well make a cut with $10 handsaw...If you have clients paying for quality of work then yes Festool is the way to go...
@milkod2001 Жыл бұрын
This saw kzhead.infoUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B comes in handy in many ways. When I had a small (dead) tree fall I started the process of disposal by using this saw and cutting off the small branches. Then slowly work on the small trunk with undercutting and letting it fall down. With many trees on acres of land paying for a tree service can be expensive. It also is nice in that it can be used in hard to get areas like along my creek. It's also safer and quieter than a chainsaw. It obviously can't cut down massive trees but it does work fine for small ones or brush. And of course since I already own a Black
@montrich19 ай бұрын
Инструмент - предел мечтаний!!!! Всё продуманно для хорошей работы 🔥👍🇷🇺
@user-pi4tg2fn8b Жыл бұрын
I've had that saw for years and I love it. A little weak, but very handy. Siding, decking, interior shelving etc ..
@dustinmarquand5301 Жыл бұрын
I would love to have a Festool set like that! Great video...👍👍👍
@ronrichmond4694 Жыл бұрын
Nice review Dusty, I have the HKC55 too and one little thing you forgot to mention is it's ability to plunge cut by pressing the black button on the top near the depth guage. For me this is a major selling point of the saw as it makes it a circular saw and plunge saw all in one package.
@mattworsfold1172 Жыл бұрын
Such a great design and lots of awesome features. Love mine when framing.
@jessehughes3877 Жыл бұрын
Bruh, why are you framing with a festool!?
@Mayhem-Mechanics Жыл бұрын
This was my first tool into the Festool ecosystem. A couple thousand dollars later, I still enjoy using it, albeit my TSC55 gets more use since a proper plunge saw is more versatile for most of my work. But the HKC55, while slightly underpowered compared to worm-drive saws with bigger batteries, combines the accuracy factor(while being one handed with the FSK rails, not the regular FS rails), so allowing you to use your other hand to steady the work piece, if necessary. Mafell has a nearly identical saw, albeit here in North America we don't see much Mafell equipment, compared to Europe 😕
@4570Govt Жыл бұрын
Very nice! I don't have any of these tools but I like hearing about the innovations
@FormerlyKnownAsAndrew Жыл бұрын
This is the best saw for cutting stair treads and risers the little dust bag works great quick and easy.
@aaronoconnor606 Жыл бұрын
Одним словом: ✨FESTOOL✨ Булатный лайк мой👍
@user-fx7ic1tw6d Жыл бұрын
im a big fan you get all the fancy tools and use them very well and are very didicated to your career, he could sell the same tool 3 or 4 times to the same customer without breaking a sweat
@PabloGonzalez-cy8hn Жыл бұрын
Man what a beautiful tool🔥
@krisneiper8883 Жыл бұрын
I’m thinking of buying this but all my festool stuff is 110v power just wondering how the battery is how long would you get outta a full charge 18v 5ah battery
@montdino97757 ай бұрын
Very good machine👍👍
@eksorteksort Жыл бұрын
Mantap sangat bermanfaat sekali
@Abieca18 Жыл бұрын
Dude!!!! Ya got me... I think I must have the saw
@michiganswamphopper6840 Жыл бұрын
It’s pretty awesome!
@dustylumberco Жыл бұрын
I'm sure I won't be the first to say this but I'm a makita fan, but this... this is fucken awesome.
@kennardshire9960 Жыл бұрын
Hey Dusty: Corded vs cordless. Your opinion
@hewittgordon8843 Жыл бұрын
Clever design.
@Goalsplus Жыл бұрын
Sir! You are a national treasure! A total badass!
@elstallion556211 ай бұрын
I wish I was there and I could work too
@yusufaslan-vi7jw3 ай бұрын
Brasil ainda não temos esses equipamentos.
@ronaldopereira324 Жыл бұрын
Идеал. 👍👌👏✊🤜🤛💪🤝
@olegpankrashkin5081 Жыл бұрын
Хороший инструмент.Мне бы такой.
@user-ji5xp8wr6x Жыл бұрын
First time seeing you talking haha
@cum_as_you_are Жыл бұрын
if that saw weren't $800 I'd consider buying one.
@jimgam730 Жыл бұрын
Speargunfishing please, i really want know how and where to get triggered stuff, hard to find or hard to make simple triggered
@syarifidayat Жыл бұрын
Very Cool 😎
@jamallaidley4718 Жыл бұрын
👍👍😁
@dustylumberco Жыл бұрын
More of a showcase than a review but great video
@dudegpo1YT Жыл бұрын
Dear Man, your face and your voice are so cute, it's impossible don't love your job, maybe too much expensive😁😁🤗🤗
@PupettaZoccola Жыл бұрын
What
@binglebongle8601 Жыл бұрын
@@binglebongle8601 I hope isn't a misunderstanding but its a form of respect, this is the cause of no heart
@PupettaZoccola Жыл бұрын
Good the festooL👷
@robinsonmunoz8530 Жыл бұрын
Does festool sponsor you? (They should if not😆)
@toshn4151 Жыл бұрын
Ooooh $700 A serious saw. ⭐️⭐️⭐️⭐️⭐️
@califuturist Жыл бұрын
Is this company tools or better than makita tools
@jeromestewart204 Жыл бұрын
Dusty A thought: Start a project of some kind and use a whole hour on it
@RichardMLowe Жыл бұрын
I'm guessing that's a quick $2,000.?
@2JustMe1 Жыл бұрын
Wow 👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻🌟🌟🌟🌟🌟🌟
@dvbmaxs1mini857 Жыл бұрын
I have the saw, and it's honestly under powered. It does work well for most stuff under 1" but bogs cutting 2by stock.
@dandeflavis7004 Жыл бұрын
Spoko
@SebastianKulesza-xc7vb Жыл бұрын
For a small payment of $1,500 dollars this could be yours 😂
@zachariah1991 Жыл бұрын
$700. Not bad for contracting work. Can see it being very useful and saving a lot of time
@alr6463 Жыл бұрын
Гении
@Ahmat555 Жыл бұрын
Du Festool Bewerber! 😁 PP
@peterpiedl3312 Жыл бұрын
Кто нибудь подскажитье этому человеку чтоб снимал горизонтальные планы, а не вертикальные.
@STORMFACTORY Жыл бұрын
I bet it’s a sweet saw. I just don’t want to spend 2k for it
@zeuz4218 Жыл бұрын
Esas herramientas no llegan a chile
@gatoaaronperezaravena9271 Жыл бұрын
☹👍👍😎
@KevinJimenez-wl6lo Жыл бұрын
One day, perhaps. I gotta get a whole lot better before investing in Festool. Then, I'll probably be sorry I didn't before.
Now that's the way a review should be. Show me the features - edited to bare bones. Nicely done.
Thank you 🙏
Hey Dusty, I love your channel it makes woodworking look very simple... :) Festool tools are extremely good quality and so smart but man they are so so expensive...
Thank you 😁😁👍
Too expensive for the average person
Yes, woodworking can be very expensive hobby. If you are not making money from it you can as well make a cut with $10 handsaw...If you have clients paying for quality of work then yes Festool is the way to go...
This saw kzhead.infoUgkx84IcU5pbZd1Qrz8u4-YRLmJax7kdRi7B comes in handy in many ways. When I had a small (dead) tree fall I started the process of disposal by using this saw and cutting off the small branches. Then slowly work on the small trunk with undercutting and letting it fall down. With many trees on acres of land paying for a tree service can be expensive. It also is nice in that it can be used in hard to get areas like along my creek. It's also safer and quieter than a chainsaw. It obviously can't cut down massive trees but it does work fine for small ones or brush. And of course since I already own a Black
Инструмент - предел мечтаний!!!! Всё продуманно для хорошей работы 🔥👍🇷🇺
I've had that saw for years and I love it. A little weak, but very handy. Siding, decking, interior shelving etc ..
I would love to have a Festool set like that! Great video...👍👍👍
Nice review Dusty, I have the HKC55 too and one little thing you forgot to mention is it's ability to plunge cut by pressing the black button on the top near the depth guage. For me this is a major selling point of the saw as it makes it a circular saw and plunge saw all in one package.
Such a great design and lots of awesome features. Love mine when framing.
Bruh, why are you framing with a festool!?
This was my first tool into the Festool ecosystem. A couple thousand dollars later, I still enjoy using it, albeit my TSC55 gets more use since a proper plunge saw is more versatile for most of my work. But the HKC55, while slightly underpowered compared to worm-drive saws with bigger batteries, combines the accuracy factor(while being one handed with the FSK rails, not the regular FS rails), so allowing you to use your other hand to steady the work piece, if necessary. Mafell has a nearly identical saw, albeit here in North America we don't see much Mafell equipment, compared to Europe 😕
Very nice! I don't have any of these tools but I like hearing about the innovations
This is the best saw for cutting stair treads and risers the little dust bag works great quick and easy.
Одним словом: ✨FESTOOL✨ Булатный лайк мой👍
im a big fan you get all the fancy tools and use them very well and are very didicated to your career, he could sell the same tool 3 or 4 times to the same customer without breaking a sweat
Man what a beautiful tool🔥
I’m thinking of buying this but all my festool stuff is 110v power just wondering how the battery is how long would you get outta a full charge 18v 5ah battery
Very good machine👍👍
Mantap sangat bermanfaat sekali
Dude!!!! Ya got me... I think I must have the saw
It’s pretty awesome!
I'm sure I won't be the first to say this but I'm a makita fan, but this... this is fucken awesome.
Hey Dusty: Corded vs cordless. Your opinion
Clever design.
Sir! You are a national treasure! A total badass!
I wish I was there and I could work too
Brasil ainda não temos esses equipamentos.
Идеал. 👍👌👏✊🤜🤛💪🤝
Хороший инструмент.Мне бы такой.
First time seeing you talking haha
if that saw weren't $800 I'd consider buying one.
Speargunfishing please, i really want know how and where to get triggered stuff, hard to find or hard to make simple triggered
Very Cool 😎
👍👍😁
More of a showcase than a review but great video
Dear Man, your face and your voice are so cute, it's impossible don't love your job, maybe too much expensive😁😁🤗🤗
What
@@binglebongle8601 I hope isn't a misunderstanding but its a form of respect, this is the cause of no heart
Good the festooL👷
Does festool sponsor you? (They should if not😆)
Ooooh $700 A serious saw. ⭐️⭐️⭐️⭐️⭐️
Is this company tools or better than makita tools
Dusty A thought: Start a project of some kind and use a whole hour on it
I'm guessing that's a quick $2,000.?
Wow 👏🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻🌟🌟🌟🌟🌟🌟
I have the saw, and it's honestly under powered. It does work well for most stuff under 1" but bogs cutting 2by stock.
Spoko
For a small payment of $1,500 dollars this could be yours 😂
$700. Not bad for contracting work. Can see it being very useful and saving a lot of time
Гении
Du Festool Bewerber! 😁 PP
Кто нибудь подскажитье этому человеку чтоб снимал горизонтальные планы, а не вертикальные.
I bet it’s a sweet saw. I just don’t want to spend 2k for it
Esas herramientas no llegan a chile
☹👍👍😎
One day, perhaps. I gotta get a whole lot better before investing in Festool. Then, I'll probably be sorry I didn't before.
I can’t afford them never will 😢
D is for Dusty
Cze
미국인들이 멘날 돈 달래 미국인들 되려다가 일 시켜서 돈죠. 주한 미군 꼴통들도 정리해