Hey guys, Sorry for the lack of content lately. Its been a whirl wind around this camp. Finally got some time to post a video from a little while back. Hoping to be able to catch up soon.
Thanks for your patience and support. I hope you enjoy this rather short vid.
He's back boys 💪💪⚡⚡⚡⚡⚡⚡⚡⚡
🍆🍆🍆
Man I just love this ol dude, can’t imagine Being an apprentice with him how much you would learn
Yessir he’s back baby
Who?
No kidding, was past nervous 😬
I been a welder for some time and I throughly enjoy watching you work, you sir are a true craftsman.
I've been welding since 2007 and I enjoy watching IC WELDING Videos. I'm still learning watching him work 👍👍
Issac Your ability to grab anything and cut straight and putting together like it's nothing just nocks me off my feet, Fabuluos Job on the video and On the repair!!!
He's the Charlie Daniels of the cutting toarch
👍🏼 👏👏👏 I was happily surprised that you mentioned CUTTING EDGE ENGINEERING, as I was thinking the same.
Back at it!! Love when you get shout outs from CEE and allistairc123. all of you are insanely talented and love watching the skill and craftsmanship.
Just remember Isaac, it’s only sketchy if it doesn’t work! Well done as always. One of the GOATS in his craft here folks.
I was just thinking the other day that I hadn't seen an IC Weld video for awhile. I'd love to just follow you around for a couple days and watch you work. Great video Isaac!
Loved the J.J. on Good Times reference Isaac, lol. You're definitely a master craftsman when it comes to your work. Make it look easy.
Kid Dyno-mite!
I truely enjoy watching your tourch work!!.. thank you!!
Looking forward to hopefully seeing you and CEE get together 👍👊.
That would be pretty sweet to see! 👍👌⚡💥💨⚡⚠️🚧🛠️🔧🔩👨🏻🏭👍😀
Im hoping to meet them next year. We'll have to see.
@@ICWeld You will need to brush up on your Australian then..practice.." Di-Ger-E- Doo " and " H-Ugh-Jack-Man "
You can have Hoo Jack Man, it’s not like he’s a full time resident here, his career is over there, with his familiar people..
@@sonofadutchman9315 it's from a movie..humour mate
I guess it has been said many times before, but you are like a surgeon with that torch. It is such a pleasure to watch you do your magic, even on a somewhat simpler job. Thanks, Isaac, and have a pleasant weekend.
Man, you cut like a surgeon. I enjoy your videos.
You are still the best with a torch I have ever seen. Good job
Curtis has mentioned you too! Two of my favorite channels! Thanks!
I love work! ... Could sit watching it all day!!
the maestro strikes again. well done.
Isaac, your freehand skills are impeccable. A true master of his craft. Thanks again for the content 🤘
Very much enjoy every time You post something Issac. Best Wishes.
Good to see you back on! Been missing you and I’m sure JJ is glad you’re back!
Ha
I'm 60. I started running a torch and welding with my dad at around 12. Your cut came out nice. I can tell a lot by the sound of the torch. I have my left hand under my right. That gives me the straightest cut. Very little slag on your cut. It sounded like you were using more 02 than I would but it came out beautiful. Taking pride in your work is a beautiful thing. Well done sir.
He's the man,
Pleased to see you back, I've got a growing collection of popcorn and beer that is reserved for just your video's...
Glad to have you back! Great info as always. Thank you for the video.
Nice to be able to watch skilled guys work 👍👍💪💪⭐️⭐️⭐️⭐️⭐️😎😎
I never get tired of watching you wielding a torch. Amazing display of skill every time.
Excellent job, as always!
As long as you weren't sick or in jail, we'll forgive you :) As Keith Rucker says, filming adds a lot of time to the job and I appreciate what you show us. Get that respirator.
"thats pretty sketchy, but it just might work" awesome. Love your videos. I have learned a lot from you so.... thank you.
Always amazed by your positive attitude, “It’s not hard, easy peasie!”
Glad you’re back! Live about 40 miles from you!
Issac...good to see you back, we have been missing you!
Made my day when I saw there was a new IC Weld video! Plus another example of Issac the Cutting Torch Machine!
Been so long, thought you might a "Drug up n left'em in a bind." Nice job there Boss Man.
Glad to see you back!
We missed you bud, good to see you again!😊
The master of handheld torch cutting is striking again 😏Minimal time, maximal result. Customer happy. Thanks for sharing!
Thank You, Thank You & Thank You for Sharing. I was going through some major IC Weld Withdrawals 😳!
My man is a surgeon with that cutting torch
Glad you're back .
Nothing impossible with the right attitude. And you have that attitude. Subscribed.
Glad your back..been missing your videos..thanks for sharing.. Nelson from Woodbine Texas..
Great job…Curtis is a master as well.
It's really interesting. You did a great job. Very skilled. Thanks for the content.
Back at it !!!
It shows with the respect between you two ... You and Kurtis are about the best at what you do, and thousands of miles apart . You two need to meet face to face someday . That'd be a great show . :)
Thanks Issac Great video. Nice lil job. See ya on the next one.
Thanks Issac. Good to have you back.
You're back!!!! It is a glorious day!!
Great Vid again Isaac.. Thank you.. watched it straight after Kurtis's and yes.. Respirator sounds like a darned good idea
Good to see you again…Barrie, Canada
Always great to see a new video thank you
Sure enjoy your videos, Isaac. Thanks for the shout-out to Kurtis too. You guys do a lot of good in the world.
It's nice to watch somebody who is really good at this.
Awesome as always! And yes, please do invest in a respirator. Money well spent.
always great stuff Issac.....cheers from Florida, Paul
First thing I thought when you took that cutoff away was boy that would make an awesome fire pit lol. Great work as always.
Wonderful to see a new video from you again. Watching you working to figure out how to tackle a problem is really wonderful. Wish I could go back about 50 years to learn from someone as talented as you. Oh, and speaking of learning... how is your son doing? Kurtis is a master also. Great watching him! Totally amazing!
Funny you mention kurtis. Hes got some nice equipment. The wrlding turntable is a very good tool. The fresh air unit he uses is pretty awesome too. Great job sir.
Incredible work! Very satisfying to watch and learned a lot.
The example of kerf was a revelation. Thanks
That cut off would make a cool little fire ring
I enjoy all your work videos and wish you could publish more, thanks.
You always make all your projects sooooooo easy.
Extra points for the JJ Walker reference! These are good times too! *wink*
Your back! 👍👍👏👏👏👏🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
thank you for showing about how you follow the line with the cut kerf..... learning .... thank you.
Wow amazing when you use the torch you’re like cutting precision Truly amazing how accurate you get with a torch thank you for sharing your videos and your knowledge
Thanks for sharing fantastic job as usual
I greatly appreciate that you have an actual rock sample of how the thingy cuts. My dad was a heavy equipment mechanic and welder. This brings back good feels. Thanks for posting the content. Julius.
DYNAMITE !!! I miss Good Times !! Very nice work !! I've done that weld and turn thing at the same time 😂....if it works it works and it totally worked !! Great job as alway's !! 👍👍
Curtis does have all the cool stuff.
You are very good welder and I love your free hand cutting skills
Glad to see you're back!
thank you for sharing your wisdom, i learn something new every time i watch you.
Thank you for sharing, always a pleasure follow your project, 👍👍👍👍
Another educational lesson from the master!
Glad you’re back Isaac !
Another great video, I love it thanks 👍👍
Glad to hear about the air respirator in the end.
Nice as always!
That Curtis is a hard act to follow, he continually amazes me. But.. So do you! I always learn something watching your videos!
A proper genuine you tube channel 👍🏻👍🏻👍🏻👍🏻
Great to see you back! Love your videos.
You look like you're icing a big cake sir , genius 🎂
love the curf cut tip. i learned that tip in stagecraft back in highcshool making floats for theatre out of wood. Same thing with metal. glad to see an upload. people don't realize the gold and free game you're giving that will better people in their career. thanks
Good to see you back.
Great video. Yes, a welding turntable would make your life easier, used ones are pretty reasonable.
We missed you!! Welcome back!!
sir your skills are amazing. I love your adaptation to overcome hurdles in a process. Stay Safe. I switched to a fresh air system 2 years ago and it has made a big difference in fatigue being less at my age. Converted over to encourage our youngest son who is 29 to start using one. He printed one off on our printer and we purchased standard things like the battery pack from Dewalt.
You do beautiful work.
Amazing torch skills
Isaac,you mention Curtis from Cutting Edge Engineering in your video. You are both superb in your respective fields in my mind. Maybe a Intercontinental collaboration could be on the cards in the future. You would have to travel to Australia though,as Curtis probably wouldn't be allowed into the U.S :)
You are a skilled surgeon with a cutting torch and just as skilled with a wire feed or stick. I am too old now to take welding up, but still a joy to watch someone like you Issac. Will be looking forward to your next video.
If it’s any consolation, you may have had the littlest doubt but we knew better… Great job as always!
As always Issac, your explanations are clear and concise.
🇨🇦🤓👍 That was some SERIOUS Cutting Face ...Dam...The way you rotate your head is Cool 😎... Top Notch Repair as always..
I like how you do things like my grandpa taught me. Cut to the line. Not ON the line with a torch.
It's always interesting watching your videos, I'm a real amateur and would never attempt anything that needed strength importance. I've often thought that you would make a great teacher in welding.
Man ,I'm glad your back ,you tube has been short since you have been gone😎❤️
Right tools for the right job. Nicely done.
As always nice work!
Well Issac you glued that one up really nicely 😂 great job as always thanks for sharing your work.