Hi I would like your prepared scraper and thanks again for all your hard work and support Thomas.
@ianmoston334016 сағат бұрын
We are all "Winners" , thanks to the likes of YOU, R. Raffan, Mike Peace and many others.
@handydan728710 күн бұрын
You are an excellent teacher!Your videos are viewed far and wide including Florida. If I am the lucky one,I would like the scraper prepared by you. thanks again for excellent teaching!
@jimlavelle82678 күн бұрын
Dear Tomislav, You are an exceptionnal woodturning instructor. This last one is incredibly useful not only to learn but also to improve my use of thé scrapers. You are the first reference I give to people who ask me questions on turning. I would be quite happy to win your refiner, ready to use, and happy also to promote it around me. I would be interested in buying one depending on the price to have it in Canada where Crown seems to be limited to Lee Valley. A last word, Crown could not have chosen a better promoter than you for their products. Thanks for all the attention you put to details in your videos. Alain
@alainnoel219811 күн бұрын
Thank you sir for sharing your craft. I have been turning many years but have learned more from your videos than anywhere else. Congratulations on your new tool line. I can’t wait to try one, especially that is prepared just the way you use it.
@Idahowoodturner-vw2wc11 күн бұрын
Congratulations on this new opportunity!!! Like so many others have said, your teaching through these videos is a priceless legacy of true craftsmanship. I see both you and Richard as giants with a true passion for sharing your mastery of the wood turning craft. If lightning strikes and you draw this post, I would treasure a scraper that you have finessed to your liking. Regardless, I'll be sending an email in the morning to get in line for your first tool run! Thanks for all you do!
@jamesshamess298411 күн бұрын
Congratulations on your new line of tools. I always watch both you and Richard Raffan. I really like the scraper. I’ve often thought about shaping one of my own just like that.
@ArtHailey-ye3vx12 күн бұрын
I hadn't realize that a scraper could produce such a smooth finish. Thank you for such a helpful video. I would love to receive a raw scraper. Good luck with your signature tools.
@PaulJames-em6bu11 күн бұрын
congratulations on having your own signature scraper and well deserved. I would be very excited to have a finessed scraper. Cheers Tony
@tonywatson555111 күн бұрын
I own several Crown tools and they are very good steel, so congratulations on your signature line. For me, my preference would be to receive the tool as is so I can learn to polish, sharpen and raise the bur. You have become one of my favorite channels to watch and learn from, so please keep up the great work. Thank you.
@tomstpeter786012 күн бұрын
Thank you so much for all the information and skill you give and demonstrate, I would love a scraper honed and finished by you if I win, I never win but always hopeful. I am a wood turner myself for a few years now and have learned a ton from you and others on you tube. Thank you for all the time you put in with making the videos we all appreciate it so much.
@aaronneiderman530012 күн бұрын
After struggling to properly sharpen my first set of bowl gouges i turned to KZhead for some guidance and thankfully happend upon your videos. You have been my instructor and mentor ever since, my go to for how to. I am basically still a beginner but have improved my skills X10 since tuning into your videos. BTW it would be great to actually see firsthand a tools edge sharpened by an actual turning expert. Thanks for everything.
@courtneycrace735810 күн бұрын
Thank you.! You are so humble, but for sure you are not a little guy anymore. You are one of the big guys 💪. A great teacher, you are so complete with explaining 👌. And congratulations with your beginning of ‘your’ tool-line.. already love it.. And if I can choose between raw or let your hand make it to finest, I go for FINEST 🥰👌..
@79Firegirl11 күн бұрын
You are moving on up. This scraper looks great and to have your name on it really is a big deal. I would love to win one, preferably one that you have polished and honed. Thank you for this generous offer. Again, congratulations on this next step in your career.
@DougMilleratWoodSpunRound12 күн бұрын
Thanks for the tips on sharpening and raising the burr. I'm a relatively new turner and really appreciate the help. Really like the work you're doing and you 4 way videos with Mike, Sam, and Richard. Good luck with your new line of tools.
@billthompson40211 күн бұрын
I am so glad to have found you on KZhead. I am still a beginner in woodturning and your videos are the best source to learn! Great looking scraper, I would like to have a raw one. And if I am not the winner, I will buy one 🙂
@zisoft11 күн бұрын
Tomislav, I am very excited about your development of the tool line and you web site. I am in Australia and hope that when your site and tools are ready, I can buy some. Like a lot of viewers, I learned wood turning from KZhead and refined what skills I have from there, you are helping me to refine further also watching Richard Raffan who in my mind, is one of the world's best production turners.
@stephenmcfadyen138512 күн бұрын
Congratulations from Murillo Ontario Canada. You must be over the moon to have your own tool line starting out. Your videos are are very informative and a pleasure to watch. Keep up the great work.
@jkurbanski647512 күн бұрын
Привет, Томислав. У нас есть поговорка: "Под лежачий камень вода не потечёт". Все эти годы, что я смотрю (и учусь) твои видео, ты постоянно развиваешся, ищешь новое, пробуешь. Ты делишься с другими и учишь. Ты - супер! Твой новый проект очень неожидан и он - супер! Хочется пожелать тебе всяческих успехов в твоём движении и чтобы ты достиг всего того, что задумал. Дерзай! Спасибо тебе!
@user-qk2hw9zj1s11 күн бұрын
I really enjoy your videos. I am hoping all the best for you and your venture into tool selling. If I am lucky enough to win, I would prefer the scraper prepared by you. Thanks for all your hard work in encouraging and teaching woodturning.
@GazzaBott10 күн бұрын
I'm little late but hopefully not to late! I've been watching your videos for quite awhile now. I would really appreciate a scraper prepared and ready to use from you! You are an incredible wood turner. Keep up the good work!
@areaubaud947710 күн бұрын
You and Richard are the best teachers!
@ronaldwitbooi283111 күн бұрын
First of all, Congratulations and good luck on your new venture! I think Richard has been an inspiration to many turners. My mentor is and has always been Sam Angelo and his inspiration has been Richard. I've learned a great deal from watching and listening to you also. I use a scraper quite a bit more now from watching you four doing "like turnings" each month. Winning one of your scrapers would be fantastic! Keep up the good work! Take care, Dave
@davidmorgan752211 күн бұрын
Tomislav. Love your work and that tool. Finished scraper would be great 👍
@chrisdodds338312 күн бұрын
A finessed scraper would be amazing! Thank you from Alaska for your videos.
@user-wj9ei6jf3j10 күн бұрын
Thanks again for a outstanding demonstration. I never was a user but by watching your videos l have been getting into using them.
@jonsayre940411 күн бұрын
Put me down for one Tomislav!! Like so many have said before...thank you for your time and sharing your knowledge to help us all become better turners. Best of luck in this new and exciting venture of launching your signature line of tools!!!
@drawingisfun356412 күн бұрын
A finessed scraper would be awesome. Thay way csn know what good looks like! Your videos, and richards have been hugely helpful in learning to turn the last couple months.
@ChrisColeArcher12 күн бұрын
Thanks for your lessons! A signature grind would get a place of honor in my beginner's collection!
@elfendertig11 күн бұрын
Yes, if i were to win i would want you to modify it for me. Im very happy to see your channel continue to grow from what it was when i first started watching you. You have also taught me so much during that time and i thank you for that.
@BrianThorn-Arizona12 күн бұрын
So happy for your success, Tomislav! This is a fantastic thing and I certainly will be buying your new scraper. For what it's worth, I like being able to buy just the steel without a handle. Just a bit of feedback. You are going to be world renowned, sir. Keep it up.
@jayscott30611 күн бұрын
Tomislav, I have known Richard for a long time and he is very much a mentor to me as he is to you. It fills me with pride to see the growth of your videos, confidence and your work. You show the utmost respect to Richard. I will definitely keeping an eye out for your range of chisels. If I was fortunate to win, would you prepare the chisel as you did in your video please. Darren
@darrenreid463412 күн бұрын
Tomislav, you are a wonderful teacher who has a gift for explaining the details of our craft in a thoughtful manner. Please keep up your video work and enter me in you scraper (fully prepped) give away. If I am so unfortunate to win, I will gladly purchase one when ready.
@LawrenceMoniz10 күн бұрын
I have converted my scrapers to your specs and love how much better they perform. Thank you Tomislav!
@alanneel27499 күн бұрын
Glad to hear that☺️ thank you
@tomislavtomasicwoodturning9 күн бұрын
Pretty cool that you're going to have your own line of tools.
@daveurban101811 күн бұрын
Tomislav, you inspire me! I hope that one day I can get near to your level of wood turning and tool control and I think you are a good, humble man. Good luck with your signature scraper enterprise and I look forward to your website. If I should be lucky enough to win one of your scrapers, please would you sharpen it your way. Many thanks and best wishes, Keith
@keithhoward964710 күн бұрын
Hi Tomislav, Thanks for all that your share with us. Yes I would love one of your scrapers and have it prepared by yourself. Cheers Russell
@russelledwards870311 күн бұрын
Nice. Well deserved, Tomislav. Really happy for you. And great job explaining the process on getting 3 kinds of burr on the scraper. Now with the new burnisher you will have to find another use for that old bowl gouge-turned-burnisher.😄
@metodemersic12 күн бұрын
would like a scraper prepared by you. thank you for your fantastic videos!
@susanmahler4282 күн бұрын
Congratulations Tomislav on your new signature tools, brilliant! It would be nice to get a prepared tool. And I would be interested in purchasing a tool once they are available. I too, like many others, have learned so much from your videos, thank you.
@MrKevincryan12 күн бұрын
Yes. I am interested in the giveaway but also interested in purchasing one. I have really benefited from watching you and Richard using the scrapper .
@danderson293011 күн бұрын
Congratulations on getting your own scraper line. I will purchase when they become available. Thanks
@noelgreen938112 күн бұрын
Congratulations on your own line of tools. Love your videos. I would love a scraper finished by you.
@brentwells429811 күн бұрын
Thank you for all your great information and how you go in to detail is very helpful and appreciated. I used to watch you when you were using the old chisel as a scraper, which is what I’m using now. If I am lucky enough to win I would like you to prepare it exactly like the one in this video. Thanks again for all your great information on wood turning.
@brunobar214912 күн бұрын
This is a wonderful next step for you. Congratulations! If I were to win this fantastic looking and working tool, i would want it just from the box. I would follow your instructions to preo it myself. I look forward to your videos each week, watching and learning at 5AM before going to my shop.
@prgfitz10 күн бұрын
Please do not put yourself down as I always find your videos and advice an inspiration. Please add me to your list to purchase one of the scrapers when available. If I have a chance in the giveaway I would prefer the finished tool. Thanks again
@geofftidy87452 күн бұрын
Thank you very much
@tomislavtomasicwoodturning2 күн бұрын
Another Master class Tomislav the scrapers look amazing, TOMASIC REFINER i think sums up this tool perfectly.👍👍
@William_Kenny11 күн бұрын
Great work by yourself and Raffin. Keep it up and put me on your refined scraper waiting list please.
@richardmisdom100411 күн бұрын
Hello Tomislav, First of all, for me you are no longer a little guy from Croatia. Rather, you are to me what Richard is to you. Many KZheadrs just show what they can do. You show us step by step how to do it. That's a big difference. I started woodturning exactly one year ago. I learnt exclusively from KZheadrs. I certainly learnt 90 per cent from you. Of course I'm going to buy one of your scrapers. Not only because I owe it to you, but also because the steel quality is better than the one I made myself. But I would prefer it as it comes out of the box. After all, I made my first scraper myself exactly according to your instructions. I would like to do the finish myself. Unfortunately, the tailstock on my DML 320 has just broken, so I can only turn very small parts at the moment. I sincerely wish you every success with your own tool line and thank you again for the invaluable knowledge that you are making available to us here. Greetings Andreas By the way, I'll be back in Croatia at the end of June and am already looking forward to the beer that bears your name 🍻.
@abrodeck12 күн бұрын
Awesome tool. Hope to use it sometime.
@user-bx8tl6vh8s12 күн бұрын
Tomislav: Your channel contains rich, relevant content, full of tips and gems -- improving with each video. As s retired furniture maker you are the catalyst who is inspiring me to revisit lathework, (particularly turning something besides spindles). lol I will be happy to purchase any of your signature tools this summer, (when my lathe is out of storage). Cheers, Dennis
@dvavra12 күн бұрын
Another great video Tomislav. Raw for me, just like my steak. 😀 I hope the new venture works out for you. 👍👍
@Winterbourne_wood_turning12 күн бұрын
Good day Tomislav, Truly appreciate and enjoy your videos. I have used crown tools exclusively for over 10 years. Glad you have aligned with them. So I will buy your tools as well. Please enter me in the giveaway with raw tool. The quality of you work speaks for itself.
@user-pe6zk6is8b11 күн бұрын
Huzza and congratulations! Can't wait for these to hit the US suppliers. I predicted that you would have signature tools, but I had no idea that it would happen this quickly. Good on Crown and your (everyone's) mentor! The handle profile on that burnisher is identical to what I put on screwdriver handles. Tomasic Refiner is an excellent brand. I hope it becomes ubiquitous in this craft! And thanks for another excellent video!
@greggerstner559912 күн бұрын
Congratulations Buddy! No one deserves a Signature tool more than you! I can't wait to get my hands on one and then hopefully down the line a asymmetrical gouge🤔😉😉
@Daca02312 күн бұрын
Hello Tomislav, I really appreciate your willing to share your wide knowleage to all of us. Yes, I would like to have one of them, ready for the use.
@user-wq9we1sm8x11 күн бұрын
Hi Tomislav I really enjoy your videos a lot. I have turned a lot of bowls and thanks to you my sanding process is less and less. I would love to have one of your signature scrapers in the hopes that someday I could become half as good as you.
@ronaldworthmann513612 күн бұрын
Hello Mr. Thomasic. I am a mediocre Wood Turner, who has learned a lot by watching your videos. You are a fantastic teacher. I do not have a sheer scraper and would take great pleasure in having one. If I would be lucky enough to win one of your sheer scrapers, I would love to have it finished by you. Thank you for sharing all the great work that you do. 42:07
@rosegehring64211 күн бұрын
It is exciting to get a tool in your name. The video is very educational, thank you. I would definitely be interested in one when it is in production.
@teomanoruc107811 күн бұрын
Thank you for all you do. I've only been turning for a few years and have watched 100s of videos by a lot of turners. It's down to just a handful now with you and Richard at the top of the list.
@artlee741512 күн бұрын
I like your style, Mr T.....I like your scraper, too! my preference is a prepared tool. Thank you!
@papaD4011 күн бұрын
Hi Tomislav, I have followed you on my woodturning journey and have learned so much from you, thank you very much - I see you as one of the best teachers, you are very creative and innovative, i love the way you problem solve on the hoof and how your designs evolve. I would love the opportunity to have one of your signature TOMISIC REFINER scrapers prepared by you. best of luck. Diolch yn Fawr !
@malcmenzies355610 күн бұрын
Hi, for sure finessed scraper, I think it is very valuable to see what the burr should look and feel like.
@DennisLampret11 күн бұрын
I would really like .your new scraper…if I win then I’d like you to finish the sharpening. If I don’t win then I will buy one when it becomes available. Either way, I’m very grateful for your work and appreciate how you teach. I’m 71 and new to this (around 6 months) and love bowl turning.
@jennysorensen86499 күн бұрын
Love your and Richard's videos. Thanks for sharing your knowledge.
@gholsopple12 күн бұрын
Tomislav love your videos your teaching technique of the tools are great and yes i would love to have a finished scraper can’t wait till they come available
@billstoffle738312 күн бұрын
Hi Tomislav, I’ve always been a bit intimidated by the scraper but gradually getting more confidence by watching you and Richard. I’d love a finessed scraper if I am lucky enough to win. Cheers from Australia 🇦🇺
@jennybarnes480612 күн бұрын
Hey Tomislav This is fantastic news and I wish you the very best. You are so down to earth, it’s a real pleasure watching your videos and you’re my favourite woodturner. Many thanks for sharing your skills with us. I would love to win a scraper finessed by you, though like others I would probably buy one from you once you get things up and running Again, good luck.
@DiggaTheWolf12 күн бұрын
I have learned so much from your videos. If I win please prep the tool
@douglaslunn39967 күн бұрын
Always a good explanation. I wish i’v had the skills you have. Not a little guy from croatia but a excellent woodturner that will take the time to teach his knowledge to others. Never have learned more as watching those video's. Keep on turnin. Greetings from a little guy from Belgium.
@dirkvanbesien11 күн бұрын
Hi Tomislav Thank you for showing us your skills, your English is getting really good now 😊 if I won I would like one of the scrapers that you finished Thank you John
@johndonnelly983212 күн бұрын
That grind helped me to a better finish. I never win anything, but sharing your and Richards experiences, is a big help.
@bjarnelaursen480712 күн бұрын
Congrats Tomislav, nice looking scraper. I would like a raw one. Wishing you all the best
@robertobandolomenti797812 күн бұрын
Another fantastic, in-depth video, Tomislav - thank you! I'm new to using scrapers and struggling a bit (made a couple from old files), but your instruction will help steer me to better results. How exciting to have your own signature tools! If I'm lucky enough to win one, I'm sure it'll take pride of place in my tool rack :) Even better would be the finessed scraper and burnisher, that would be just perfect. I know your scrapers will sell well and you really deserve the success. Thanks for all your help.
@martindudley786612 күн бұрын
Hi Tomislav, As mentioned, there are not many turners on You Tube that show the proper use and steps of using various tools and the turning process. You are now the first choice/click for me when I log in to You Tube for turning videos. I've been interested in getting a shear scraper like that for some time now. If chosen, the scraper prepared by you would be a welcome addition to my collection of tools. Thank you so much for sharing your knowledge!
@bobostrowski883211 күн бұрын
Tomislav yet another great video. Very informative and full of knowledge. Scraping has changed my game. Would be nice to have a tool finished by you. Congratulations on the new signature tools. I have some of Richard's signature scrapers and they are lovely. I always learn something from your videos this time was the details using the burnisher to raise the bur. Thanks again and have a great day! I would be interested in purchasing one of your signature scrapers as well.
@terryyancy395710 күн бұрын
This was a very informative scraper video! I'd be very excited to win and/or buy one of your scrapers with whatever type of handle it has or doesn't have! When the time comes to order one, I would definitely pick the option that includes the burnisher--especially if it is shorter. Congratulations on the exciting new chapter of life!
@nathangoodson739012 күн бұрын
Tomislav thank you for all your videos. I have learned a lot from them. I especially enjoy the 4 way videos and have watched them all. It would be awesome if I won your finished scraper. I would love to buy some of your tools when they are ready to sell.
@dickcolman890412 күн бұрын
Tomislav, thanks for another great video. I always learn something new. You are a great down to earth teacher. I’m going to try to put the little notch on one of my scrapers. The Crown tool that I have is my favorite tool. You picked a great company to partner with. Thanks again for sharing your knowledge and expertise. If I win a tool I would want you to finesse it.
@robertshirk347911 күн бұрын
Very well deserved my friend, I’ve learnt so much from you that my turning skill has gone up by several notches, I would love the finessed scraper Cheers Hoggy
@hoggyhogwood12 күн бұрын
Tomislav I really enjoy your videos and would like the chance to win one of your signature scrapers withe surface and burr prepared by you. There are only 3 turners that I watch without fail you, Richard Rafan, and Phil Anderson. I admire your ability to turn, to teach, and how you all appear to be really good people. I hope you continue to make videos for a very long time. Best regards Dave Ducharme
@daveducharme531612 күн бұрын
Your my new go to turner guy! Keep up the great videos. I'd like to enter your giveaway and have you prepare the tool.👍🤗 Brian
@briandivermass7 күн бұрын
Hi Tomislav, it would be an honour to have a scraper specially prepared by you! Your videos and explanations are always the easiest to understand, without unnecessary long or complicated talking. I learned more or less everything I do on the lathe from you. Thank you for your work and effort and I look forward to learning new interesting methods from your future videos. All the best, Nico
@turmspitze11 күн бұрын
Would really like a finished tool. Thankyou for all the informative videos. You have really cut down on my sanding time. Keep up the good work.
@richardwiatrak628311 күн бұрын
Great to see you coming out with your signature line love it
@darrellanderson722912 күн бұрын
Hi Tomislav, You are the man and deserve all the support from these amazing companies that are working with you. I enjoy your style and technique and hope you continue to make many more videos. I’d be happy to receive your signature scraper, finest to perfection. Cheers.
@BrookeAnderson-os1wn12 күн бұрын
Looks like a quality made tool, very interesting, hope you keep on developing them !
@douglasyoung808911 күн бұрын
Oh man, that's so cool! I follow you for quite some time now and it's pleasant to see all the milestones you have checked and every time you check another one I'm happy for you as you are my favorite channel 🤗 I've learned so much by watching your videos and you're the main reason for me to use scrapers at all as well as the spindle gouge. Now that you'll have your own line of tools I really hope it pays off for you! Keep the content coming, I'll be always there to watch and learn something new by doing so 💃🏽 (And for the slight chance of winning, I'd be happy with a finessed scraper just so I can see how your's actually look in person 🤗) Greetings from Germany!
@0BAMiiN12 күн бұрын
Another excellent video. The finish you got from the scraper was perfect. I would love one of these scrapers. The raw one would be great.
@lynseyemma12 күн бұрын
Tomislav, I would love to get a finished one with the notched area but more important I would like the handle signed. It is after all a prototype of your first “SIGNATURE” tool. Good luck with this venture. Cheers, Tom
@tomcoker988212 күн бұрын
I would like the scraper and burnisher as prepared by you. Good luck with this project.
@noelgreen938112 күн бұрын
Congratulations Tomislav. I have learned so much from your videos. Looking forward to seeing your store and adding a new scraper to my tool set. I’m fine ordering the raw kit. I can finish it.
@turningwiththewoods12 күн бұрын
Congratulations, Tomi! That is great news.
@MikePeaceWoodturning12 күн бұрын
It would be a honour to own one of your scrapers finessed by a master!
@johanels390712 күн бұрын
I very much enjoy your videos. They are very informative. I think a tool prepared by you would be awesome.
@johnb896512 күн бұрын
Hello Tomislav. I love your videos and I'm learning a lot about turning. I would be interested in the refined scraper. Many thanks for everything. Greetings.
@user-qx9tc5sc1x12 күн бұрын
This looks like what I needed. Both the scraper and your burr instructions. If I win, I would like one that you have prepared , including the corner detail for the bead. And thanks for all your teachings.
@user-df5oq2nw3i12 күн бұрын
Thanks for all the hard work, Tomislav! I've learned so much and still do. Always eagerly waiting for new videos. I'd gladly finish a raw scraper and put it to good use, but if not I'll just buy one once they are available :)
@DR.darkrim11 күн бұрын
Congratulations on getting your own line of tools! I love your videos, and have learned a ton by watching you! If I am the lucky winner I would like a finished scraper set up and ready to go. I would be interested in purchasing one if I am not the winner as well. Anxiously looking forward to your website launch! Next you need Crown to make your skew/gouge tool, I forget what you call it. I've been trying to make one but I don't have very good skills on the grinder like you do. Thank you again for all of your teaching!
@johnreedy703712 күн бұрын
Thank you for all you and Richard do for all of us ,I watch your videos religiously.
@christopherharrison672412 күн бұрын
Tomislav, congratulations on this next step in your journey. I've followed you almost from the beginning and I'm thrilled for your success. It is well deserved. Should I be lucky enough to wi , I would love fir you to prepare the tool. Don't forget the flat area on the left side. 😉
@jeffjames156712 күн бұрын
Watching you use the refined scraper as you described that would be the one or me. I have just used your instruction to "refined " an old scraper that never really gave clean cut and now I can't believe the difference, it now cuts better than ever did "straight from the box". Thanks for the video.
@paulsaysell650812 күн бұрын
Great lessons Tomislav. I would love to have one of your finished scrapers.
@jackthompson509210 күн бұрын
3:28 enjoy watching your videos. I've learned so much from your teaching methods. A raw scraper would really help with my turning.Thank you
Hi I would like your prepared scraper and thanks again for all your hard work and support Thomas.
We are all "Winners" , thanks to the likes of YOU, R. Raffan, Mike Peace and many others.
You are an excellent teacher!Your videos are viewed far and wide including Florida. If I am the lucky one,I would like the scraper prepared by you. thanks again for excellent teaching!
Dear Tomislav, You are an exceptionnal woodturning instructor. This last one is incredibly useful not only to learn but also to improve my use of thé scrapers. You are the first reference I give to people who ask me questions on turning. I would be quite happy to win your refiner, ready to use, and happy also to promote it around me. I would be interested in buying one depending on the price to have it in Canada where Crown seems to be limited to Lee Valley. A last word, Crown could not have chosen a better promoter than you for their products. Thanks for all the attention you put to details in your videos. Alain
Thank you sir for sharing your craft. I have been turning many years but have learned more from your videos than anywhere else. Congratulations on your new tool line. I can’t wait to try one, especially that is prepared just the way you use it.
Congratulations on this new opportunity!!! Like so many others have said, your teaching through these videos is a priceless legacy of true craftsmanship. I see both you and Richard as giants with a true passion for sharing your mastery of the wood turning craft. If lightning strikes and you draw this post, I would treasure a scraper that you have finessed to your liking. Regardless, I'll be sending an email in the morning to get in line for your first tool run! Thanks for all you do!
Congratulations on your new line of tools. I always watch both you and Richard Raffan. I really like the scraper. I’ve often thought about shaping one of my own just like that.
I hadn't realize that a scraper could produce such a smooth finish. Thank you for such a helpful video. I would love to receive a raw scraper. Good luck with your signature tools.
congratulations on having your own signature scraper and well deserved. I would be very excited to have a finessed scraper. Cheers Tony
I own several Crown tools and they are very good steel, so congratulations on your signature line. For me, my preference would be to receive the tool as is so I can learn to polish, sharpen and raise the bur. You have become one of my favorite channels to watch and learn from, so please keep up the great work. Thank you.
Thank you so much for all the information and skill you give and demonstrate, I would love a scraper honed and finished by you if I win, I never win but always hopeful. I am a wood turner myself for a few years now and have learned a ton from you and others on you tube. Thank you for all the time you put in with making the videos we all appreciate it so much.
After struggling to properly sharpen my first set of bowl gouges i turned to KZhead for some guidance and thankfully happend upon your videos. You have been my instructor and mentor ever since, my go to for how to. I am basically still a beginner but have improved my skills X10 since tuning into your videos. BTW it would be great to actually see firsthand a tools edge sharpened by an actual turning expert. Thanks for everything.
Thank you.! You are so humble, but for sure you are not a little guy anymore. You are one of the big guys 💪. A great teacher, you are so complete with explaining 👌. And congratulations with your beginning of ‘your’ tool-line.. already love it.. And if I can choose between raw or let your hand make it to finest, I go for FINEST 🥰👌..
You are moving on up. This scraper looks great and to have your name on it really is a big deal. I would love to win one, preferably one that you have polished and honed. Thank you for this generous offer. Again, congratulations on this next step in your career.
Thanks for the tips on sharpening and raising the burr. I'm a relatively new turner and really appreciate the help. Really like the work you're doing and you 4 way videos with Mike, Sam, and Richard. Good luck with your new line of tools.
I am so glad to have found you on KZhead. I am still a beginner in woodturning and your videos are the best source to learn! Great looking scraper, I would like to have a raw one. And if I am not the winner, I will buy one 🙂
Tomislav, I am very excited about your development of the tool line and you web site. I am in Australia and hope that when your site and tools are ready, I can buy some. Like a lot of viewers, I learned wood turning from KZhead and refined what skills I have from there, you are helping me to refine further also watching Richard Raffan who in my mind, is one of the world's best production turners.
Congratulations from Murillo Ontario Canada. You must be over the moon to have your own tool line starting out. Your videos are are very informative and a pleasure to watch. Keep up the great work.
Привет, Томислав. У нас есть поговорка: "Под лежачий камень вода не потечёт". Все эти годы, что я смотрю (и учусь) твои видео, ты постоянно развиваешся, ищешь новое, пробуешь. Ты делишься с другими и учишь. Ты - супер! Твой новый проект очень неожидан и он - супер! Хочется пожелать тебе всяческих успехов в твоём движении и чтобы ты достиг всего того, что задумал. Дерзай! Спасибо тебе!
I really enjoy your videos. I am hoping all the best for you and your venture into tool selling. If I am lucky enough to win, I would prefer the scraper prepared by you. Thanks for all your hard work in encouraging and teaching woodturning.
I'm little late but hopefully not to late! I've been watching your videos for quite awhile now. I would really appreciate a scraper prepared and ready to use from you! You are an incredible wood turner. Keep up the good work!
You and Richard are the best teachers!
First of all, Congratulations and good luck on your new venture! I think Richard has been an inspiration to many turners. My mentor is and has always been Sam Angelo and his inspiration has been Richard. I've learned a great deal from watching and listening to you also. I use a scraper quite a bit more now from watching you four doing "like turnings" each month. Winning one of your scrapers would be fantastic! Keep up the good work! Take care, Dave
Tomislav. Love your work and that tool. Finished scraper would be great 👍
A finessed scraper would be amazing! Thank you from Alaska for your videos.
Thanks again for a outstanding demonstration. I never was a user but by watching your videos l have been getting into using them.
Put me down for one Tomislav!! Like so many have said before...thank you for your time and sharing your knowledge to help us all become better turners. Best of luck in this new and exciting venture of launching your signature line of tools!!!
A finessed scraper would be awesome. Thay way csn know what good looks like! Your videos, and richards have been hugely helpful in learning to turn the last couple months.
Thanks for your lessons! A signature grind would get a place of honor in my beginner's collection!
Yes, if i were to win i would want you to modify it for me. Im very happy to see your channel continue to grow from what it was when i first started watching you. You have also taught me so much during that time and i thank you for that.
So happy for your success, Tomislav! This is a fantastic thing and I certainly will be buying your new scraper. For what it's worth, I like being able to buy just the steel without a handle. Just a bit of feedback. You are going to be world renowned, sir. Keep it up.
Tomislav, I have known Richard for a long time and he is very much a mentor to me as he is to you. It fills me with pride to see the growth of your videos, confidence and your work. You show the utmost respect to Richard. I will definitely keeping an eye out for your range of chisels. If I was fortunate to win, would you prepare the chisel as you did in your video please. Darren
Tomislav, you are a wonderful teacher who has a gift for explaining the details of our craft in a thoughtful manner. Please keep up your video work and enter me in you scraper (fully prepped) give away. If I am so unfortunate to win, I will gladly purchase one when ready.
I have converted my scrapers to your specs and love how much better they perform. Thank you Tomislav!
Glad to hear that☺️ thank you
Pretty cool that you're going to have your own line of tools.
Tomislav, you inspire me! I hope that one day I can get near to your level of wood turning and tool control and I think you are a good, humble man. Good luck with your signature scraper enterprise and I look forward to your website. If I should be lucky enough to win one of your scrapers, please would you sharpen it your way. Many thanks and best wishes, Keith
Hi Tomislav, Thanks for all that your share with us. Yes I would love one of your scrapers and have it prepared by yourself. Cheers Russell
Nice. Well deserved, Tomislav. Really happy for you. And great job explaining the process on getting 3 kinds of burr on the scraper. Now with the new burnisher you will have to find another use for that old bowl gouge-turned-burnisher.😄
would like a scraper prepared by you. thank you for your fantastic videos!
Congratulations Tomislav on your new signature tools, brilliant! It would be nice to get a prepared tool. And I would be interested in purchasing a tool once they are available. I too, like many others, have learned so much from your videos, thank you.
Yes. I am interested in the giveaway but also interested in purchasing one. I have really benefited from watching you and Richard using the scrapper .
Congratulations on getting your own scraper line. I will purchase when they become available. Thanks
Congratulations on your own line of tools. Love your videos. I would love a scraper finished by you.
Thank you for all your great information and how you go in to detail is very helpful and appreciated. I used to watch you when you were using the old chisel as a scraper, which is what I’m using now. If I am lucky enough to win I would like you to prepare it exactly like the one in this video. Thanks again for all your great information on wood turning.
This is a wonderful next step for you. Congratulations! If I were to win this fantastic looking and working tool, i would want it just from the box. I would follow your instructions to preo it myself. I look forward to your videos each week, watching and learning at 5AM before going to my shop.
Please do not put yourself down as I always find your videos and advice an inspiration. Please add me to your list to purchase one of the scrapers when available. If I have a chance in the giveaway I would prefer the finished tool. Thanks again
Thank you very much
Another Master class Tomislav the scrapers look amazing, TOMASIC REFINER i think sums up this tool perfectly.👍👍
Great work by yourself and Raffin. Keep it up and put me on your refined scraper waiting list please.
Hello Tomislav, First of all, for me you are no longer a little guy from Croatia. Rather, you are to me what Richard is to you. Many KZheadrs just show what they can do. You show us step by step how to do it. That's a big difference. I started woodturning exactly one year ago. I learnt exclusively from KZheadrs. I certainly learnt 90 per cent from you. Of course I'm going to buy one of your scrapers. Not only because I owe it to you, but also because the steel quality is better than the one I made myself. But I would prefer it as it comes out of the box. After all, I made my first scraper myself exactly according to your instructions. I would like to do the finish myself. Unfortunately, the tailstock on my DML 320 has just broken, so I can only turn very small parts at the moment. I sincerely wish you every success with your own tool line and thank you again for the invaluable knowledge that you are making available to us here. Greetings Andreas By the way, I'll be back in Croatia at the end of June and am already looking forward to the beer that bears your name 🍻.
Awesome tool. Hope to use it sometime.
Tomislav: Your channel contains rich, relevant content, full of tips and gems -- improving with each video. As s retired furniture maker you are the catalyst who is inspiring me to revisit lathework, (particularly turning something besides spindles). lol I will be happy to purchase any of your signature tools this summer, (when my lathe is out of storage). Cheers, Dennis
Another great video Tomislav. Raw for me, just like my steak. 😀 I hope the new venture works out for you. 👍👍
Good day Tomislav, Truly appreciate and enjoy your videos. I have used crown tools exclusively for over 10 years. Glad you have aligned with them. So I will buy your tools as well. Please enter me in the giveaway with raw tool. The quality of you work speaks for itself.
Huzza and congratulations! Can't wait for these to hit the US suppliers. I predicted that you would have signature tools, but I had no idea that it would happen this quickly. Good on Crown and your (everyone's) mentor! The handle profile on that burnisher is identical to what I put on screwdriver handles. Tomasic Refiner is an excellent brand. I hope it becomes ubiquitous in this craft! And thanks for another excellent video!
Congratulations Buddy! No one deserves a Signature tool more than you! I can't wait to get my hands on one and then hopefully down the line a asymmetrical gouge🤔😉😉
Hello Tomislav, I really appreciate your willing to share your wide knowleage to all of us. Yes, I would like to have one of them, ready for the use.
Hi Tomislav I really enjoy your videos a lot. I have turned a lot of bowls and thanks to you my sanding process is less and less. I would love to have one of your signature scrapers in the hopes that someday I could become half as good as you.
Hello Mr. Thomasic. I am a mediocre Wood Turner, who has learned a lot by watching your videos. You are a fantastic teacher. I do not have a sheer scraper and would take great pleasure in having one. If I would be lucky enough to win one of your sheer scrapers, I would love to have it finished by you. Thank you for sharing all the great work that you do. 42:07
It is exciting to get a tool in your name. The video is very educational, thank you. I would definitely be interested in one when it is in production.
Thank you for all you do. I've only been turning for a few years and have watched 100s of videos by a lot of turners. It's down to just a handful now with you and Richard at the top of the list.
I like your style, Mr T.....I like your scraper, too! my preference is a prepared tool. Thank you!
Hi Tomislav, I have followed you on my woodturning journey and have learned so much from you, thank you very much - I see you as one of the best teachers, you are very creative and innovative, i love the way you problem solve on the hoof and how your designs evolve. I would love the opportunity to have one of your signature TOMISIC REFINER scrapers prepared by you. best of luck. Diolch yn Fawr !
Hi, for sure finessed scraper, I think it is very valuable to see what the burr should look and feel like.
I would really like .your new scraper…if I win then I’d like you to finish the sharpening. If I don’t win then I will buy one when it becomes available. Either way, I’m very grateful for your work and appreciate how you teach. I’m 71 and new to this (around 6 months) and love bowl turning.
Love your and Richard's videos. Thanks for sharing your knowledge.
Tomislav love your videos your teaching technique of the tools are great and yes i would love to have a finished scraper can’t wait till they come available
Hi Tomislav, I’ve always been a bit intimidated by the scraper but gradually getting more confidence by watching you and Richard. I’d love a finessed scraper if I am lucky enough to win. Cheers from Australia 🇦🇺
Hey Tomislav This is fantastic news and I wish you the very best. You are so down to earth, it’s a real pleasure watching your videos and you’re my favourite woodturner. Many thanks for sharing your skills with us. I would love to win a scraper finessed by you, though like others I would probably buy one from you once you get things up and running Again, good luck.
I have learned so much from your videos. If I win please prep the tool
Always a good explanation. I wish i’v had the skills you have. Not a little guy from croatia but a excellent woodturner that will take the time to teach his knowledge to others. Never have learned more as watching those video's. Keep on turnin. Greetings from a little guy from Belgium.
Hi Tomislav Thank you for showing us your skills, your English is getting really good now 😊 if I won I would like one of the scrapers that you finished Thank you John
That grind helped me to a better finish. I never win anything, but sharing your and Richards experiences, is a big help.
Congrats Tomislav, nice looking scraper. I would like a raw one. Wishing you all the best
Another fantastic, in-depth video, Tomislav - thank you! I'm new to using scrapers and struggling a bit (made a couple from old files), but your instruction will help steer me to better results. How exciting to have your own signature tools! If I'm lucky enough to win one, I'm sure it'll take pride of place in my tool rack :) Even better would be the finessed scraper and burnisher, that would be just perfect. I know your scrapers will sell well and you really deserve the success. Thanks for all your help.
Hi Tomislav, As mentioned, there are not many turners on You Tube that show the proper use and steps of using various tools and the turning process. You are now the first choice/click for me when I log in to You Tube for turning videos. I've been interested in getting a shear scraper like that for some time now. If chosen, the scraper prepared by you would be a welcome addition to my collection of tools. Thank you so much for sharing your knowledge!
Tomislav yet another great video. Very informative and full of knowledge. Scraping has changed my game. Would be nice to have a tool finished by you. Congratulations on the new signature tools. I have some of Richard's signature scrapers and they are lovely. I always learn something from your videos this time was the details using the burnisher to raise the bur. Thanks again and have a great day! I would be interested in purchasing one of your signature scrapers as well.
This was a very informative scraper video! I'd be very excited to win and/or buy one of your scrapers with whatever type of handle it has or doesn't have! When the time comes to order one, I would definitely pick the option that includes the burnisher--especially if it is shorter. Congratulations on the exciting new chapter of life!
Tomislav thank you for all your videos. I have learned a lot from them. I especially enjoy the 4 way videos and have watched them all. It would be awesome if I won your finished scraper. I would love to buy some of your tools when they are ready to sell.
Tomislav, thanks for another great video. I always learn something new. You are a great down to earth teacher. I’m going to try to put the little notch on one of my scrapers. The Crown tool that I have is my favorite tool. You picked a great company to partner with. Thanks again for sharing your knowledge and expertise. If I win a tool I would want you to finesse it.
Very well deserved my friend, I’ve learnt so much from you that my turning skill has gone up by several notches, I would love the finessed scraper Cheers Hoggy
Tomislav I really enjoy your videos and would like the chance to win one of your signature scrapers withe surface and burr prepared by you. There are only 3 turners that I watch without fail you, Richard Rafan, and Phil Anderson. I admire your ability to turn, to teach, and how you all appear to be really good people. I hope you continue to make videos for a very long time. Best regards Dave Ducharme
Your my new go to turner guy! Keep up the great videos. I'd like to enter your giveaway and have you prepare the tool.👍🤗 Brian
Hi Tomislav, it would be an honour to have a scraper specially prepared by you! Your videos and explanations are always the easiest to understand, without unnecessary long or complicated talking. I learned more or less everything I do on the lathe from you. Thank you for your work and effort and I look forward to learning new interesting methods from your future videos. All the best, Nico
Would really like a finished tool. Thankyou for all the informative videos. You have really cut down on my sanding time. Keep up the good work.
Great to see you coming out with your signature line love it
Hi Tomislav, You are the man and deserve all the support from these amazing companies that are working with you. I enjoy your style and technique and hope you continue to make many more videos. I’d be happy to receive your signature scraper, finest to perfection. Cheers.
Looks like a quality made tool, very interesting, hope you keep on developing them !
Oh man, that's so cool! I follow you for quite some time now and it's pleasant to see all the milestones you have checked and every time you check another one I'm happy for you as you are my favorite channel 🤗 I've learned so much by watching your videos and you're the main reason for me to use scrapers at all as well as the spindle gouge. Now that you'll have your own line of tools I really hope it pays off for you! Keep the content coming, I'll be always there to watch and learn something new by doing so 💃🏽 (And for the slight chance of winning, I'd be happy with a finessed scraper just so I can see how your's actually look in person 🤗) Greetings from Germany!
Another excellent video. The finish you got from the scraper was perfect. I would love one of these scrapers. The raw one would be great.
Tomislav, I would love to get a finished one with the notched area but more important I would like the handle signed. It is after all a prototype of your first “SIGNATURE” tool. Good luck with this venture. Cheers, Tom
I would like the scraper and burnisher as prepared by you. Good luck with this project.
Congratulations Tomislav. I have learned so much from your videos. Looking forward to seeing your store and adding a new scraper to my tool set. I’m fine ordering the raw kit. I can finish it.
Congratulations, Tomi! That is great news.
It would be a honour to own one of your scrapers finessed by a master!
I very much enjoy your videos. They are very informative. I think a tool prepared by you would be awesome.
Hello Tomislav. I love your videos and I'm learning a lot about turning. I would be interested in the refined scraper. Many thanks for everything. Greetings.
This looks like what I needed. Both the scraper and your burr instructions. If I win, I would like one that you have prepared , including the corner detail for the bead. And thanks for all your teachings.
Thanks for all the hard work, Tomislav! I've learned so much and still do. Always eagerly waiting for new videos. I'd gladly finish a raw scraper and put it to good use, but if not I'll just buy one once they are available :)
Congratulations on getting your own line of tools! I love your videos, and have learned a ton by watching you! If I am the lucky winner I would like a finished scraper set up and ready to go. I would be interested in purchasing one if I am not the winner as well. Anxiously looking forward to your website launch! Next you need Crown to make your skew/gouge tool, I forget what you call it. I've been trying to make one but I don't have very good skills on the grinder like you do. Thank you again for all of your teaching!
Thank you for all you and Richard do for all of us ,I watch your videos religiously.
Tomislav, congratulations on this next step in your journey. I've followed you almost from the beginning and I'm thrilled for your success. It is well deserved. Should I be lucky enough to wi , I would love fir you to prepare the tool. Don't forget the flat area on the left side. 😉
Watching you use the refined scraper as you described that would be the one or me. I have just used your instruction to "refined " an old scraper that never really gave clean cut and now I can't believe the difference, it now cuts better than ever did "straight from the box". Thanks for the video.
Great lessons Tomislav. I would love to have one of your finished scrapers.
3:28 enjoy watching your videos. I've learned so much from your teaching methods. A raw scraper would really help with my turning.Thank you