Forgotten Woodworking Tool (The Chair Maker's Vise)
2021 ж. 2 Қаз.
380 826 Рет қаралды
This is how I build the french chair maker's vise, this vise was used during the 18th Century, it can cut perfect tenons and square stock-ends.
Here is a video showing how it is used: • What a chair maker's v...
Some of the good tools I am using:
T-Bevel square: amzn.to/3azunrK
Mini square: amzn.to/3BGTnJu
Marking knife: amzn.to/3FGfZw9
Japanese clamps: amzn.to/3lAVI32
Japanese saw: amzn.to/3oYjhF7
Ripping Sawblade: amzn.to/3BCNZXZ
Multipurpose Sawblade: amzn.to/3FLp6vu
Clamps: amzn.to/3BFLWSO
My Wood threading jig: amzn.to/2X5XCzg
My Main chisel set: amzn.to/3FFGvpv
Sharpening stone: amzn.to/3aO2Djv
My video recording gear:
Main lens: amzn.to/3FKO4eL
Tripod: https: amzn.to/3DGRtcH
#vise
#chair
#woodworking
This is like the woodworker's equivalent of the Clickspring channel (minus dialog). It is another one of those that I could watch non-stop.
🙏🌹🤝
First video I've watched from this channel... about 1min in and saw this comment. Subscribed. Anything worth comparing to Clickspring must be worth a sub.
@@jimmyfleebot Welcome aboard
@@TheWoodCrafter1 "board" I see what you did there
Agreed. Another channel to add to the list with Clickspring and Stavros Gakos. Just discovered and subscribed!
That horizontal japanese saw blade holder along with the flat surface on that vise is genius and actually something new that I've ever seen before.. brilliant!!
Thank you 🤝
Yeah I’ve never seen that type of saw either, very clever!! Did you invent that saw mr woodcrafter Just subscribed after watching this, carpenter myself, excellent work, second to none!👍👍
@@Osianr thank you, no I didn’t invent it but I made my own version using a Japanese saw for cross cutting and rip cutting! and used it for tenon cutting to start a straight and parallel cuts! Hope it was helpful 🤝
After 40 yrs of working wood I thought I had seen it all, you sir are truly a craftsman. This is now my favorite WW channel.
Thank you sir, pleasure to read your comment and welcome aboard 🤝
I can't get over how great that wood looks. Beautiful grain pattern and no defects whatsoever!
Thank you very much!
The KZhead algorithm works in misterious and unpredictable ways. Oftentimes it seems to have lost all of its marbles, but every once in a blue moon it drags me to a channel like this one. Yes, this is what I want. Thank you, algorithm. You could have given this one to me sooner, but I am grateful nonetheless.
😊🌹🙏🤝
yes it does, fellow skull guy. note the "dimples". durham is incoming
This in itself is a beautiful work of art! Thank you for sharing this. You reminded me of working with my dad on his carpentry builds. He used all the tools you did and you reminded me of what each one was for.
Thank you, good to know that this video has brought to you good memories 🤝
I've watched this 3 times already because of how impressive your precision is. I hope to one day be as skilled as you. Thank you for sharing.
Thank you, Scott, it is my pleasure to read your comment, it is all about practice and patience, my skills are no better than yours, I just spent more time doing this than you, that is all my friend.
This is the kind of workmanship that made me obsessed with woodwork! ❤️🙏🏼
🌹🤝
Amazing work, fascinating combinations of techniques all done to peak quality! Can't wait to see it in use in future videos!
Thank you , sure thing 👍
I absolutely love a good vise. I don't know what this one would bring me that my Moxon vise doesn't, but that's no reason for me not to make one! Really, really excellent craftsmanship.
Thank you 🤝, there is a link in the video description showing how it is used and I have used it also during this video too The Dwarfed Behemoth Roubo Bench with Arms (The making of the body). kzhead.info/sun/lsuHmJeboXmYdKM/bejne.html Hope you find it useful!
There is so much I could learn from this one video alone! I love all the simple jigs you use to ensure all your cuts stay accurate. I’m going to try each of them! Thank you keep up the quality craftsmanship.
Happy to know that man, thank you and good luck 🤝
Impressive level of both skill and patience. Brilliant, well done sir!
Thank you sir 🤝
First time here, but what a pleasure to watch that kind of precision and skills. And the tool with a saw blade between two pieces of wood to cut or start cutting a precise 90 degrees angle; I've never seen that before, and that is so genius and simple at the same time. Thank you so much! / Pia, a new subscriber from Denmark
Thank you sir, and welcome on board, pleasure to read your comment 🤝
Helt enig 🙂
Wow. I'm a carpenter with five years of experience but have never seen such precision in a hand saw.
Just like Carnegie Hall, it takes practice [to get there].
Look up sashimono woodworking
A thing of beauty. Perfection achieved. 👌
Beautiful from start to finish
Incredible craftsmanship still exists in Massachusetts! Mesmerizing watching you make that. thank you so much.
Thank you buddy 🤝
Beautiful work! And awesome idea for that plane/saw combo thing - I'm new to woodworking, but thats the first I've seen of such a tool, and it seems so incredibly useful! Great work
Thank you, 🤝glad you found it helpful
Man! This is incredibly satisfying to watch!! Amazing engineering and execution!! Way to go
🤝thank you man
Love your idea for the saw
You quickly earned my Like when I saw that cool jig to hold your detached Japanese saw blade so you could cut the first piece horizontally. Nice! I enjoyed the rest of the video too. Subbed!
🤝🌹
In love… beautiful craftsman..
Thank you Alaa, appreciate it 🤝
Marvelous; like a European cabinet makers shoulder vice, the bench screw is behind the movable jaw, so you can clamp dovetail boards at both a comfortable height [because there are no guide bars in the way like on an ordinary face vise], and you do not have to worry about the vise jaw wracking.
Sir, your woodworking precision, perfect 45 degree and 90 degree angles are perfect every time! I absolutely love your woodcraft KZhead channel!
thank you sir and most welcome 🤝
Stunning craftmanship and a beautiful result.
Thank you Dean.
It's just mesmerizing! Greetings from Belarus!
Beautiful work, that's what I call craftsmanship 👍
🤝🌹
I believe I need to make one out of steel to work tooling on my bench in my machine shop. I've never seen one before, but have built a wine press, and binding press, and can see it being able to be turned every which way, and clamped for more work. Thanks, I appreciate the idea!
🤝👌
@@TheWoodCrafter1 I've enjoyed working in wood my whole life, and yet work metal, despite the fact it doesn't bend to the will quite so easily. I love to see fine craftmanship, it's disappearing from my country, but is still to be found. I make tooling for my work, and generally put it in wood boxes, for protection for life. I've never used such a form of saw, to perfectly set the height of dovetails, and have always labored trying to get them at "the same deck height", I think I might have to make one. I use very similar method and tooling, to mark out precise lines, shapes, on a surface plate, but never thought to use it to set cutting height, and keep it. I learn something new every day. I'd enjoy a couple weeks in your shop, or you in mine. We'd do well together. Semper Fidelis, John
@@johnmcclain3887 pleasure reading this, I would enjoy working with someone who have a similar mindset, I enjoy experimenting with different techniques, I also believe that 2 brains are better than one, maybe one day we can meet who knows :) thank you for your time and thoughtful comment.
ZEN...and the art of vice making. True magic.
🌹🤝
This is absolutely incredible. What a joy to watch.
Thank you ben, appreciate your comment man
wow! beautiful piece and amazing skills! very pleasant to watch the process
🤝
Beautiful work!
Outstanding!! That is a great looking vise and some amazing craftsmanship.
Thank you Christopher, appreciate that man🤝
Votre travail est purement magnifique avec une qualité d’ajustement incomparable ! Merci
merci monsieur 🌹
Well thought out project! And very beautifully crafted. A small tip that can help with reducing gaps in the dovetail joint is to cut with the saw around 1mm from the marking and then finish working up to the marking with a hand chisel. If your markings are perfect, so will the joint become. Although it takes slightly longer to do the finishing touches by hand chisel. The results become more precise, IF you have a steady hand, then a tablesaw saw where if it is misaligned by half a millimeter, it will show up on the end result. My personal opinion aside, great video!
Thank you for the tip👌
Your videos are so satisfying to watch! Amazing work 👏
Thank you Ramez, appreciate it my friend 🤝🌹
You master your carpentry task well. You are dedicated to perfection with what you do and I really enjoyed watching this video. It inspires me and others. God bless you, take care and stay safe.
🤝🌹
It's guys like you that make it so damn hard to be good. You are a true Craftsman. Wonderful work sir
Thank you sir, my pleasure 🤝
Absolutely Gorgeous.
Liked for that saw. Holy crap the accuracy is intense.
Nice work!
This is not a vise. This is an art piece! Fantastic the precision and quality. Congrats.
Thank you very much!
Perfect!👍👍👍👍👍😁💚🪵
Stunning. I'll have two please! 👍
Outstanding craftsmanship. It was a pleasure to watch and learn as you work to such a high standards. Thanks for sharing. Best wishes.
Thank you too, my pleasure 🤝
Wow, so much precision. Jood job!
Man that is some amazing craftsmanship for sure! Also looks like you have a lot of cool shop toys, i'm jealous !!!
Thank you Jerry, 👌 🙂🤝
Beautiful
Bonjour, Vraiment un belle étau, il faut que je m'en fasse un dans les plus brefs délais. Merci pour cette vidéo, prenez soin de vous et de votre famille, à bientôt.
Amazing work ! Congrats
Thank you mate.
Beautiful, an upper class Moxon vice. 👍 🎩
🙏🤝
Very nice work. Excellent build.
Thank you 🌹
Not a tool but a masterpiece. Congrats!
:) Thank you sir
Gustó, limpieza, diseño y buena madera. Saludos desde Nicaragua
I've never seen one of those. Looks very handy for more than just chairs, well worth making for fine joinery. I like the idea of magnets in that saw guide too.
Thank you, happy to know you find it helpful 👍
Great workmanship. Very enjoyable.👍👍Liked and subscribed.
I saw the Forgotten Tool and what was in the brackets and it peaked my interest. I have heard about these devices before but never seen one being made or even one in use. My 1st words when I saw it fully assembled were WOW, WOW, oh my days, that is beautifully made. The dovetails look so good too. I don't know what it is about Dovetail joints but I love the look of them when the colour of the end grain .. Brilliant build my friend. Really enjoy ur videos. I don't comment on many videos with woodworking over the last while but this one is a stunning build it has to be said. I enjoy watching great craftsmen and women at work..
Thank you, appreciate your comment 🤝🌷
Bravo, du grand art !
Merci Monsieur
Felicitaciones Estimado MAESTRO. Una presision milimétrica envidiable. Gracias mil por compartirme su excelente y práctico diseño.
Gracias amiga por tu tiempo y comentario.
Absolutely superb-Thank You ✅👍
🤝🌹
Really glad I found your channel! Sub'd and thanks for such great content
🤝 Thank you, my pleasure
Valuable wood clamping tool
Thank you 🤝
Absolute high level craftsmanship, presentation, how can a ww’ing video be moving? This one is. Keep it coming your destined to be a premier channel 💪💪
Thank you Robert, 🤝🌹
beautiful
Wow! Nice work, nice vid, nice project. Thanks!
Thx man 🤝
@@TheWoodCrafter1 those were some legit fine dovetails! What mini engineer square and sliding T-square are you using? I have what I thought is a good mini engineer square, but it seems off something.
The mini square is Starrett, the sliding is Stanley.
Superbe, merci pour cette vidéo 🐞
Merci aussi d'avoir regardé 🤝
I like the way you did the metal ways.
Thank you, this should be more durable than the wooden rails 👍
That thing is effectively one solid piece of wood, plus a movable jaw. Beautiful and incredibly solid.
🙂👌🤝
Well done. You work wood like a machinist.
🤝🌹
Can't wait to see what you make with this
👌
Awesome!
Thank you 🌹
welcome back 💐
Thank you mate :)
Brings a whole new meaning to precision woodworking. Beauty, function and incredible fits. Not that I need one but a joy to watch you bring it forward and finally sub'd because of this one. Thank You!
Oh! Man thank you 🙏 , and thank you again for joining me on this journey 🤝
That's really cool, I could of used one of these plenty of times. I'll attempt this one day.
Thank you, and good luck with your build you won’t regret it 🤝
Excellent travail de professionnels
🤝
fantastic Job
🤝thank you
Даже слово,,великолепно "будет мало сказать!Это просто ФЕНОМЕНАЛЬНО!
человек! спасибо за ваш сладкий комментарий, ценю это.🤝
Сделано хорошо. Только не очень понятно зачем. Какой выигрыш дают эти тиски в сравнении с привычными столярными? Или просто реплика технологии 18 века?
@@ilyakai10 Скоро сделаю еще одно короткое видео.
I learned much from watching this video. Mostly I learned that I'll never be a craftsman so I'm burning my woodworking shop and taking up knitting.
Man your comment made laugh, don’t know what to say! regardless of that. It is all about practice and trying to imagine how to approach things before you start doing them! Hope this helps, my best wishes 🤝
Excellent
🌹🤝
Смотрю и просто наслаждаюсь вашей работой ! Здоровья вашим рукам 👍👏👏👏👍
спасибо, сэр, рад это прочитать🤝
Всегда приятно смотреть на работу перфекциониста ! Отличное видео, подписался не раздумывая ! Успехов !!!
и всегда приятно читать сладкие комментарии от хороших людей, спасибо и добро пожаловать
TOP NOTCH WORK
Wow, perfect
🤝
Semplicemente fantastico.I'm specchless!!!
🌹🤝
技術レベルの高さが異次元です。すごいです。
ありがとうございます
Hello sir I'm from Nepal . I like and love your video . And your tools also it make me crazy .
Thank you and welcome friend 🤝, tools are essential for woodworking but you can start small and grow your collection by time , 🤞
@@TheWoodCrafter1 yes sir, I am a carpenter and I really love to collect the tools. And thanks for your suggestion .
🤝
Isso é uma obra de arte, que capricho, lindo, não teria coragem de usar.
😊🤝
good job
Un trabajo perfecto!! Me ha encantado. Eres un artista y me suscribo a tu canal. Un saludo 👋
Gracias y bienvenido a bordo amigo.
Seems like a regular vice would do the same job. It was well made though with great skill and the right tools and machinery.
Seems like a regular Gary would be a bit smarter than that but great spelling.
Превосходная работа. Спасибо!
Не за что
As an introvert, I approve of this video.
OMG! Stunning work sir, precision and beauty, attention to detail, all there, thank you , subscribed!
Thank you sir, pleasure to read your sweet comment and to have you on board, most welcome 🤝
What a beautiful build and video but i just cant fathom the reason for its existence given that a leg vice exists. What a labor of love.
Thank you sir, I will make a quick video to demonstrate how it is used 🤝
The music was perfect.
جميل جداً جداً، فيديوهات ممتعة يسلموا إيديك على هالشغل المتقن
🤝
Exelente projeto profissional mesmo parabéns, linda morsa.
Obrigado por seu comentário doce
Very nice my friend 🙏
Thx dave 🤝
Super 🔥👍
🌹🤝
KABEEER 💪🏽👌🏽